On transaction FBL3N report change layout and save layout icons not activ

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

Hi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan

Similar Messages

FBL3N change layout and save layout icons not active

Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeed

You are missing an authorization object in your user profile. Run FBL3N and then run SU53 to see which auth obj is missing. Then send those details to your Security.

T-code: FBL1N - Change Layout , Select Layout and Save Layout

hi all,
T-code: FBL1N - Change Layout , Select Layout and Save Layout
3 of the layout was grey out and does not allow me to choose.
Anyone can help?
Thanks.
Joo

Hi KK,
Pls follow the steps below:
1. In the SAP Screen where u get the Change layout icon is grey out.
2. Pls type /nSU53.
3. After that pls open a new session.
4. Pls type SUIM
5. Now, select the "ROLES"
6. Enter your SAP ID and the T-code and click execute
7. The roles will displayed and kindly double click it.
8. Go to the authorization object tab
9. Select display authorization object (Bottom left)
10.Select FIND and enter the authorization object where you can get from /nSU53. The authorization object is start with F_*.
11.Now, click on the display and you can see the authorization object is missing.
12.You can sent the screen shot and request the SAP FICO Functional Team to maintain it in the SAP System.
Assign points if useful
Thanks.
Joo

Change,Select and Save Layout tab is supressed in FBL1N, FBL3N,FBL5N

Hi Sapients,
While using the above T-codes the tab is suppressed. It is like that from beginning. I want to use that functionality, what shall i do. Please guide me.
Regards,
Divyesh

Hi,
Please check with the basis team as you are not authorized for th same.
What you can do is after executing the report enter /NSU53 in the transaction code field. This will show you the authorization objects missing. Take a screenshot and forward it to the basis team. \
Thanks and Regards,
Anit

Functionality for Select and Save layout in a report output

Hi,
I had developed a report program containing several fields in the output and requires the Functionality for Select layout and Save layout in a report output.
Please suggest.
Thanks,
Shariq.

While calling the FM for List Display ( "REUSE_ALV_LIST_DISPLAY" or "REUSE_ALV_GRID_DISPLAY" ) set the Parameter I_SAVE for Setting the Layout and Selecting a different Layouts.
The possible values for I_SAVE are "A", "U", "X" or others. Depending on the requiement you can set different values for the Parameter I_SAVE.
' ' = display variants cannot be saved
Defined display variants (e.g. delivered display variants) can be selected for presentation independently of this flag.
Changes can not be saved.
'X' = standard save
Display variants can be saved as standard display variants.
User-specific saving is not possible.
'U' = only user-specific saving
The user can only save display variants user-specifically
'A' = standard and user-specific saving
The user can save a display variant user-specifically and
as standard display variant. The user chooses in the display variant
save popup.
Reward points if helpful.

My ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4

The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices. If I change it on my iPad it changes on my iMac. Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

Simple question: I placed a document in iCoud on my iMac and it appeared on my iOS devices.
If I change it on my iPad it changes on my iMac.
Now, how do I change it and save it on my iMac so it automatically changes on my iOS devices?

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

Quote
Do you think I should try to find a cheap mobo to OC my current CPU? How about trying to find one (mobo) used? I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

ECC IM report, the available and assigned budgets are not correct

Hi All
Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
But individual investment order level, they are correct..
The report we are running is : S_ALR_870122806 .
Any help higly appreciated and points are assigned .
Cheers
ravindra .

Hi,
Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
Regards,
Shankar K B

Mail is not saving attachment and save as is not working

Suddenly my Mail is not saving attachment and save as is not working. I tried to save an email as I use to do but it is not completing the task. I should I do?
Thanks for any help,
Mario Lordeiro

Mario,
Was there also NO choice to View As Icon, in the contextual menu? If not, these items/images may be embedded in HTML, rather than true attachments. Other choices for normal attachments would include Open Attachment, Open With, Save to Downloads Folder -- are any of those present in the contextual menu?
With such a message open, click on View in the menubar, place the cursor on Message in the pull-down menu, and choose Raw Source. Is there any HTML code present? Is there a header immediately before any code representing what you believe is an attached file?
If need be, I can send you an email message with a known form of attachment.
Ernie

Why is CC not taking my password? I changed it and it is still not accepting it.

Why is CC not taking my password? I changed it, and it is still not accepting it.

double check your adobe.com password, http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

Failed to export the report \n Crosstabs and OLAP grids are not supported in this export format

Post Author: ajaymoudgil
CA Forum: Other
We are using Crystal Reports (Product Version: 11.0.0.1282). We encountered with a problem while we are going to export report in CSV (Separated Text). The report Contained Cross-Tab. Its Shows the Error Message u201CFailed to export the report \n Crosstabs and OLAP grids are not supported in this export formatu201D. Please find the attachment with this mail having screen shot for the same.
We were able to export CSV (Separated Text) Format in Crystal Report Version 7 for the same report. Please let us know any way(s) so that we will successfully export the report in CSV (Separated Text) format in Crystal Reports version 11.
Thanks,
Ajay Sharma

Hi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks

Cant use colours in AI free version.stroke and fill options are not active either

cant use colours in AI free version.stroke and fill options are not active either

In the Trial version of Illustrator try this:
In the top right of your screen, choose 'Essentials' from the workspace menu.
Then from the same menu, choose Reset Essentials.
Next, click the Selection tool in the Tools panel (strip on the left side of your screen, it is the black pointer at the top).
Click on the object you want to change the stroke and fill colour for. Does it display with little handles around it (this is called bounding box)? E.g. can you tell it is selected?
You should see the Stroke and Fill options in the Control panel (top horizontal strip above your document), if the object you've selected is a path. But if for instance you selected as a placed photo, you won't see the Stroke and Fill options.
If possible take a screenshot of what you are trying to do, and we can be of more help hopefully.

Acrobat won't load anymore, and says it is not activated (but it is).

Acrobat won't load anymore, and says it is not activated (but it is). It won't create PDFs from other programs either. It worked a minute ago, but now not at all.

Hi H K ,
I would suggest you to refer the following and see if that helps.
http://www.itjungles.com/fixed-adobe-acrobat-error-adobe-pdf-creation-cannot-continue-beca use-acrobat-is-not-activated.html
Regards
Sukrit Dhingra

I have upgraded my iphone 4 to 4.3.5 and the facetime is not activated.. What should i do?

I have upgraded my iphone 4 to 4.3.5 and the facetime is not activated.. What should i do?

Help here > Apple - Support - FaceTime

On transaction FBL3N report change layout and save layout icons not activ

Similar Messages

Maybe you are looking for