Once combine file, it is too large to email. Is there a way to reduce the size of the file?

Combined files and now it is too large to send. Is there a way to reduce the size of the converted file in Adobe?

Hi yodonna,
Adobe Reader doesn't allow you to reduce the size of a PDF file, as Acrobat does. But, you could upload that file to your Acrobat.com account, and create an anonymous link to it using Adobe Send. Then, you could send that link via email. You can access Adobe Send at https://cloud.acrobat.com/send. The Create an Anonymous Link feature doesn't require that you have an Adobe Send subscription.
Best,
Sara

Similar Messages

Is there a way to reduce the size of a final PDF created for print when saving a file?

Is there a way to reduce the size of a final PDF created for print when saving in any software (especially illustrator)? I don't want any quality to decrease at the same time. Thanks!

Personally I would avoid optimizing the PDF's via Adobe Acrobat Pro unless you understand what you are removing from the PDF; having said that, it is the most effective way to reduce the file-size in the right hands.
If I am sending out layouts for commercial print I change my default Print / Export setting from Standard to PDF/A-1b:2005 (CMYK). This will resolve a lot of common print problems for print-ready documents and it should embed your fonts and flatten transparencies etc.
If your document is still too large you run an Audit Space Usage using Adobe Acrobat Pro. In the left pane enable 'Content' and then hit the button in the top left corner of the Content Pane and choose Audit Space Usage.

Is there a way to reduce the size of my PDF file, created (or I should say, Exported) in InDesign.

I created a 10-page sale flyer in InDesign CS5 which will be viewed on our website. When I export it as a PDF file, even with the compression at "minimum", the size is still 3.8 MB.
Is there a way to reduce the size of the PDF file? with InDesign or another tool out there?
Thanks for your help!
Blee

Rik Ramsay wrote:
To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

Is there a way to organise the files in itunes media into playlists? i have a large playlist that i wish to add to a hard drive but i don't want to have to look up each file location separately.

is there a way to organise the files in itunes media into playlists? i have a large playlist that i wish to add to a hard drive but i don't want to have to look up each file location separately.

You cannot put music onto your iPod without using iTunes, that what iTunes is for.
It's also not a good idea to wipe the music from your computer and having it only on your iPod. We see countless posts here from people who have done just that - and then lost everything when the iPod needs a Restore. Even if you never need to Restore your iPod, what happens when you eventually replace the iPod? You'll be back here asking how to get the music from one iPod to another. That's not easy to do, we see countless posts about that too!
A much better idea is to buy an external drive (a proper external drive, not simply an iPod) and put your large amount of music onto that drive. Then point your iTunes Library to that drive. However, you need to remember two things:
You still need a backup of that Library.
Using an external drive as your iTunes Library means that the drive must be connected and ready to read before starting your iTunes programme. If it isn't, then iTunes will look on the C: drive - and you will find no music in your Library. (Once again, lots of posts about that as well!)

HT204370 I recently purchased a movie at 1080p and when I went to view it, I received a message stating 1080p is too large for playback. How can I re-download the movie at 720?

I recently purchased a movie at 1080p and when I went to view it, I received a message stating 1080p is too large for playback. How can I re-download the movie at 720?

Not sure what happend there. But ATV only streams, no HD so if you leave it too long, the whole download gets lost.
Check with iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

I have files that freeze my programs whenever I try to open ANY file. Is there a way to find the exact files causing the crash?

I have files that are freezing my programs (adobe; after effect and photoshop, as well as maxon cinema 4d). Whenever I try to import ANY file from within the program it doen't even let me select the file I need before freezing. I have moved all files off my desktop and into my dropbox, and it now allows me to import files/search for files on the desktop but NOT dropbox, once I go to dropbox it freezes again. I am assuming there are files within dropbox now that are crashing my programs. The problem is I have a lot of files in there and would like to remove the corrupt ones so that I can use my programs without freezing. Is there a way to find the exact files causing the crash?
This has happened a couple of times and each time I have to move all my files off my desktop, so there must be a type of file doing this, I just don't know what files they are.
Mac Book Pro 15" running OSX 10.9
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
ANY help would be greatly appreciated! It is making it really hard to get work done. THANKS!

This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan

I bought about 4 books at once on amazon for my iPad kindle and then realise that I'm not getting round to reading any of them. I've gone into two books but two I haven't. Is there a way of reversing the order and getting my money back?

Hi I bought too many books at once through amazon for my iPad kindle. Havent read any of them and Two I haven't actually gone in to, they have a banner across front which says 'new'is there a way of reversing the transaction either with amazon kindle or the iPad kindle application so I cane my money back?

You should ask Amazon about their returns policy or check the Amazon website. As that's who you bought them from they would be the best people to answer.

Is there a way to view the messages I sent along with files in Adobe Send?

Is there a way to view the messages I sent along with files in Adobe Send?

Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

falkner09 wrote:
is there really no fix for this?
It would depend on your definition of "Fix"
Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
To turn Zoom on or off got to:
Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
_To Zoom in or out_:
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
_Move around the screen_:
When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
_Large Text_:
Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
I hope this has helped a little - other than this option I think it pretty much is what it is.
BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
Best wishes..
Ricky

Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?

Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?
I really don't want to recreate the slides from scratch again.

What about File, Export, Text Captions...? You'll have a Word document with two columns. Translate the second column (much easier in Word) and import again. That is the normal work flow for translation. Same is possible with XML instead of Word.

Is there a way to increase the size of the tool windows/fonts in InDesign. I am having trouble seeing the info (the font is too small)

Is there a way to increase the size of the font in the tool windows in InDesign? I am having trouble seeing the info (the font is too small)

Not possible. You'll need to go to your operating system and choose a screen resolution that displays the screen with larger pixels.
Or get a new prescription for your glasses (seriously!)

Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

Go to Settings>iCloud>Storage & Backup>Manage Storage. Your backups are listed at the top, along with their sizes. Note: this will only list your most current backup. You may have your previous two backups available too but you cannot access any size information about them.

HT1473 I have a large external collection and would like to import a select folder to itunes to create a playlist. Is there a way to import the folder without mixing the contents with my large itunes library?

I have a large external collection and would like to import a select folder to itunes to create a playlist. Is there a way to import the folder without mixing the contents with my large itunes library?
I'm trying to avoid having to fish through the thousands of songs already in my itunes library to create a playlist from the songs in the windows file that I've already selected.

You're welcome.
tt2

Once combine file, it is too large to email. Is there a way to reduce the size of the file?

Similar Messages

Maybe you are looking for