One track instead of rows of images

I noticed that you have on track to work with, which makes it difficult to work with with a large slide show or movie.
Is it possible to view your images in rows to better move your images around?

H2O4
Your comparison of the Premiere Elements situation with the Movie Maker workspace clarifies what you seek.
There is no way to get the Movie Maker workspace look in Premiere Elements.
Expert workspace - tracks left to right and right to left - of course you can build on the track 99 tracks (default 3).
Quick workspace - filmstrip with scene spaces left to right and right to left.
There are a few Timeline maneuvers that you could consider, examples
ATR Premiere Elements Troubleshooting: PE12/12.1: Timeline Playback Auto-Scrolling
a. Home key to get to beginning of Timeline
b. Enk key to get to last item on Timeline
c. altering zoom in zoom out level
d. use of the Fit to Visible Timeline option
e. exploring some of the Timeline scroll options
ATR Premiere Elements Troubleshooting: PE12/12.1: Timeline Playback Auto-Scrolling
Also when you add a file to an existing Timeline, holding down the Alt key of the computer main keyboard
as you make the addition can avoid disturbances in the existing TImeline. There are way to group media
for mass movement. See Clip Menu/ Group or Ungroup.
Just some miscellaneous thoughts.
ATR

Similar Messages

  • "Insert into Multitrack" keeps inserting on new track instead of one I've selected

    Hello, Everyone!
    I've just installed Audition 3.0 (upgraded from 1.5) on Windows Vista. Looks great, but when selecting a section of audio from the edit window for "Insert into Multitrack," it keeps putting the clip/selection on the next unused track instead of the track I've selected, despite what I do. Its all from one audio file and the clips are short, so it doesn't appear to be a time issue or difference in file type. I'm assuming its something simple relating to the mulittrack/edit window set-up I'm missing that I haven't seen yet.
    Any Ideas?
    Here are some pics below ...
    Track is selected and marker line (or whatever its called) is at appropriate point, just like in Audition 1.5 (note highlighted track) ...
    Then selection/clip is higlighted in Edit Window, then "Insert" is selected, ...
    But puts clip here anyway (note highlighted clip) ...
    So that's what's going on ... any suggestions?
    Thanx!
    ---Ron

    Not that I'm aware of, but I'll check it out. The problem is, it shouldn't be doing that at all, even if it is overlapping ... every single solitary audio editing software I've ever used (Saw, CakeWalk, ProTools, Audition 1.5, etc.,) puts the clip where ever the cursor is, so I have to believe its something I'm missing ... some box I need to uncheck somewhere or something.
    ---R

  • How can I link to only one track on an album in the iTunes store?

    I'm trying to link to a song and keep it seperate from the rest of the content on the album.  The link generator is giving me a link to the song but it still brings up the rest of the album too.  Is there anyway to isolate and link to only one track?  Thanks!

    Experience (of iPods) tells me that the 160GB Classic and the 120GB Classic are from the same "family" and should therefore behave the same way. (The nano is a different family and the Touch another family yet again.)
    So, since my 160GB Classic can play one episode at time, your 120GB Classic should too. To achieve this, turn on *shuffle songs/albums.* No, I'm not joking!
    With shuffle on the Podcasts will play one episode at time when you select an episode from the episode list. Be sure to turn on the shuffle from "within a song" or from the ettings menu. If you have shuffle displayed on the main menu and use that to start shuffling songs, it doesn't affect Podcasts. You will know it's set correctly because the display will show 1 of 1 instead of 1 of "X".
    Phil

  • Error received when trying to import/only one track at a time...

    When I go to import my cd into iTunes it is only letting me import one track at a time. Also occasionally I getting this error when I try to import a track. "The file 'xxxxx.cda' cannot be imported because it does not appear to be a valid exported file." What's with this? Any help/suggestions?
    Thanks
    Avonlea

    Hi there
    If you really intend for us to see an image, please insert it. This is described at the link below:
    Click here
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • How can I break one track into several tracks

    Hello all,
    Im new to Mac and garageband, My problem is when i spin a full set of lets say 2 hours into garage band as 1 track, how can I go back and break that 1 track into several tracks so when I make a cd people can change from track to track instead of listening to one track all the way through.
    Thanks in Advance

    Ok now that I chose the region how would I export it?
    Just select "export".
    And Also Do I have to export each track one by one to itunes?
    Since you want to burn a CD, you need several sound files, and GB only exports one file at a time.

  • Why can't I get one track to open in page view?

    Hi all, I am having trouble in the score getting only one track to display in the score editor. I select the track,which has 47 bars with one extra region [bar 34-triplets] that must remain as a separate region because the triplets won't work when joined to the regions in back or in front of bar 34.So I click hold shift and select the 3 regions or just select the track[which selects all regions on that track]
    But I get a complete score instead of just the one track I want. So far no amount of fiddling with the controls[page view, hierarchy button, chain linked button] will give me the one track alone in page view. Has any one had this happen? Would some one like to help? Have any of you seen this behavior before?

    I don't know what I did to solve this, but I think it's solved by making a "duplicate of each track, then the tracks are all independent , got that from the LUG too

  • Cant listen to more than one song in a row with ios4

    Ever since i "upgraded" to the new ios4 software i can no longer listen to more than one song in a row without it stopping by itself. if im using apps while playing music it takes me back to the home screen. If someone knows how to fix this that would be nice bc im really frustrated with it and regret getting the software.

    But all of a sudden I cannot get my libraray or any playlist ti play more than one song at a time automatically. It just stops after each song.
    head into your itunes main library window. are all the little boxes to the left of your tracks unchecked?
    is so, hold down Ctrl and click on one of those boxes to recheck all the songs. (this may take a little time.)
    do you get continuous play once all the songs are rechecked?

  • How to apply one animation to play 30 different images?

    I'm brand new to Edge Animate and I'm struggling to find the answer to this.
    I have an image that comes on to the screen from the left, then stops, then user clicks a button and the image exits stage right and next image needs to come on from stage left and do the exact same thing; user clicks same button as before, new image exits stage right and next image comes in stage left.
    This is repeated 30 times for 30 different images of drinks, so instead of animating every image is there a way to code it so i can get each image to automatically come on next after the user has clicked the button and the current image has exited?
    It's probably really straight forward but I just can't figure it out!

    Here is how I would do it but this is just me! Smarter people do other things.
    do no use the main timeline
    make one symbol with an out transition and an in transition of an empty div the size of your image or put the image in.
    add labels in and out
    if your images are all the same size you can load them in the same div as a background image or change your image to img instead of div a load the images
    load your images on a click event and play the symbol's labels
    var images = ['cat','dog','mouse','chicken','rabbit'];
    i=0;
    click event
    i++;
    sym.getSymbol('SymbolName').play('in');
    // as a background image of a div
    sym.getSymbol('SymbolName').$('imageContainerName').css({'background-image':'url("images/' +images[i]+'.jpg")';
    // as an img  (you need to change the div to img by selecting the image and changing div to img (top left of the left panel)
    sym.getSymbol('SymbolName').$('imageContainerName').attr('src','images/' + images[i]+'.jpg');
    You can also write the click event in composition ready:
    sym.$('button').click(function(){
    i++;
    sym.getSymbol('SymbolName').play('in');
    // as a background image of a div
    sym.getSymbol('SymbolName').$('imageContainerName').css({'background-image':'url("images/' +images[i]+'.jpg")';
    // as an img  (you need to change the div to img by selecting the image and changing div to img (top left of the left panel)
    sym.getSymbol('SymbolName').$('imageContainerName').attr('src','images/' + images[i]+'.jpg');
    You could also do that with a json file to load your images into your symbol:
    see rudimentary example i made a long time ago for a history course sample here: https://app.box.com/s/nadfi5pjmida4jplci6i
    Hope this makes sense.

  • One merge instead of three different

    Hi all,
    My need is to calculate rows and write result into column:
    c1 if current month is 1st in quarter,
    c2 if current month is 2nd in quarter,
    c3 if current month is 3rd in quarter.
    For example, today is August, it's the second month in quarter, so I should write my value into c2 column.
    In my example below the result is just one row:
    select 111 as id, 1 as c1, 0 as c2, 0 as c3 from dualMy real result is much bigger, so I use merge to insert (is id is new) or to update (if id is already present in table).
    The question is how do I perform this using one merge instead of three different. In case it's possible at all, of course.
    CREATE TABLE marco_tmp_010811b
        (id                             NUMBER(9,0) PRIMARY KEY,
         c1                             NUMBER(15,0) NOT NULL,
         c2                             NUMBER(15,0) NOT NULL,
         c3                             NUMBER(6,0) NOT NULL);
    begin
    if months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 0 then
    merge into marco_tmp_010811b rr
      using
      (select 111 as id, 1 as c1, 0 as c2, 0 as c3 from dual) hh
    on (hh.id = rr.id)
    when matched then update set rr.c1 = rr.c1 + hh.c1
    when not matched then insert (rr.id, rr.c1, rr.c2, rr.c3)
                          values (hh.id, hh.c1, hh.c2, hh.c3);
    end if;
    if months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 1 then
    merge into marco_tmp_010811b rr
      using
      (select 111 as id, 0 as c1, 1 as c2, 0 as c3 from dual) hh
    on (hh.id = rr.id)
    when matched then update set rr.c2 = rr.c2 + hh.c2
    when not matched then insert (rr.id, rr.c1, rr.c2, rr.c3)
                          values (hh.id, hh.c1, hh.c2, hh.c3);
    end if;
    if months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 2 then
    merge into marco_tmp_010811b rr
      using
      (select 111 as id, 0 as c1, 0 as c2, 1 as c3 from dual) hh
    on (hh.id = rr.id)
    when matched then update set rr.c3 = rr.c3 + hh.c3
    when not matched then insert (rr.id, rr.c1, rr.c2, rr.c3)
                          values (hh.id, hh.c1, hh.c2, hh.c3);
    end if;
    end;

    Can be also like this
    begin
         merge into marco_tmp_010811b rr
         using
              select
                   111 as id,
                   case when months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 0 then 1 else 0 as c1,
                   case when months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 1 then 1 else 0 as c2,
                   case when months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 2 then 1 else 0 as c3
              from dual
         ) hh
         on (hh.id = rr.id)
         when matched then
         update set
              rr.c1 =
              CASE WHEN months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 0 THEN rr.c1 + hh.c1 ELSE rr.c1 END,
              rr.c2 =
              CASE WHEN months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 1 THEN rr.c2 + hh.c2 ELSE rr.c2 END,
              rr.c3 =
              CASE WHEN months_between(trunc(sysdate+125,'MM'),trunc(sysdate+125,'Q')) = 2 THEN rr.c3 + hh.c3 ELSE rr.c3 END
         when not matched then
              insert (rr.id, rr.c1, rr.c2, rr.c3)
              values (hh.id, hh.c1, hh.c2, hh.c3);     
    end;In different IF conditions, we have to make sure that other column value should not be changing,
    So in the else condition of CASE in the UPDATE section we will be using the current value of the column.
    Edited by: bpat on Aug 1, 2011 10:23 AM

  • Powershell script Information output in column instead of rows

    Dear All,
    I am required powershell script Information output  in column instead of rows.
    $usr= get-aduser -filter * | select sAMAccountName,homeDrive,TerminalServicesProfilePath,homeDirectory,physicalDeliveryOfficeName,userAccountControl,displayName,l,mail, profilepath
    $myarray = @()
    Foreach($usr1 in $usr)
    $userDN = (Get-ADUser $usr1.samaccountname).distinguishedName
    $userInfo = [ADSI]"LDAP://$userDN" | select sAMAccountName,homeDrive,TerminalServicesProfilePath,homeDirectory,physicalDeliveryOfficeName,userAccountControl,displayName,l,mail, profilepath
    $ts=$userInfo.TerminalServicesProfilePath
    $sn=$userInfo.samaccountname
    $hm=$userinfo.homeDrive
    $hd=$userinfo.homeDirectory
    $pd=$userinfo.physicalDeliveryOfficeName
    $ua=$userinfo.userAccountControl
    $dp=$userinfo.displayName
    $ll=$userinfo.l
    $ml=$userinfo.mail
    $pp=$userinfo.profilepath
    $myarray += New-Object psobject -Property @{
        Sam = $userInfo.samaccountname
        TerminalServicesProfilePath = $userInfo.TerminalServicesProfilePath
      homeDrive = $userinfo.homeDrive
        homeDirectory=$userinfo.homeDirectory
        physicalDeliveryOfficeName=$userinfo.physicalDeliveryOfficeName
        userAccountControl=$userinfo.userAccountControl
        displayName=$userinfo.displayName
         l=$userinfo.l
         mail=$userinfo.mail
         profilepath=$userinfo.profilepath
    $myarray |fl
    $myarray | Out-File "c:\final.txt"

    Hey this is such a sweet small script compared to everything else out there and I guess you can edit it to return any value you wish. One LARGE problem however: the TerminalServicesProfilePath comes back empty on all accounts regardless of whether the field
    is populated or not. This is basically because this setting is not stored in an Active Directory attribute but Terminal Services information is stored in the userParameters schema attribute as a BLOB.
    I got this script:
    $Users = ([ADSISearcher]"(&(objectCategory=person)(objectClass=user))").findall() | select path
    foreach ($user in $users) {
    $userSearch = [adsi]"$($user.path)"
    # get logon name
    $userSearch.psbase.InvokeGet(“SamAccountName”)
    # Profile Attributes
    $userSearch.psbase.InvokeGet("ProfilePath")
    # Remote Desktop Services Attributes
    $userSearch.psbase.InvokeGet("TerminalServicesProfilePath")
    which returns the value but the output is terribly unformatted. If we could integrate the two to ensure that it is correctly formatted, AND returns the TSProfile that would be awesome!
    Can anyone help me do that?
    Life is dangerous, no one has ever survived. So enjoy!
    Please do not tag an unrelated quesiton onto the end of an old and answered question.  Please read the forum guidelines before posting.
    We do not do custom scripts on demand.
    ¯\_(ツ)_/¯

  • HDV audio is 2 mono tracks instead of stereo

    When capturing my HDV video from my HDR-HC1 cam the audio is being captured as two mono tracks instead of a 2-channel stereo track. Does anyone know how to fix this and get the stereo?

    Just out of curiosity... Why?<<</div>
    Why do I want two mono channels? Why do you want a stereo pair?
    In my case, I usually have different mics connected to the two inputs on my camera. One may be a wireless and the other the on-camera mic, or another wireless. Hearing these in stereo wouldn't be natural at all, so why would I go to the trouble of capturing stereo only to have to pan them to center inside FCP? Even if I'm just using the on-camera mic (Sennheiser ME-64 or ME-66), it's a mono source so there's still no reason to convert it to stereo.
    As another example, if I'm shooting a talking head, I'll have the person miced going to one channel. I usually won't even capture the other channel as its useless to me for editing purposes.
    On the occasion I do want stereo, it's usually only when I'm taking a feed from my audio mixer where I may be mixing 6 or 8 or 10 mics. In those cases, I'll do the panning on the mixer and most likely WILL capture as stereo in FCP.
    -DH

  • How do I make a video on one track expand in size over a video on a second track? Elements 11

    How do I make one a video on one track expand in size over a video on a second track?
    Thanks.

    Sminty
    Thanks for the follow up with additional very helpful information.
    What you need to do is to keyframe the Motion Scale property so that it changes over the duration of the whole photo
    rather than  Scale being applied to the whole photo uniformly.
    Two ways you could do the keyframing of Scale..
    a. from the Timeline
    or
    b. from Applied Effects/Applied Effects Palette/Motion Panel expanded and its Scale Property there, using Toggle Animation to initiate the process.
    For now, I will describe "b"
    Your scaled down image on Video Track 2
    Your regular image on Video Track 1
    Your Timeline Indicator at the beginning of the Timeline.
    Select/Highlight the image on Video Track 2, go to Applied Effects Tab/Applied Effects Palette/Motion Panel Expanded and its Scale Property
    That area should look like
    You get an abbreviated version of the above screenshot if you do not hit the Show/Hide Keyframe Controls icon. With it opened, you will see the actual keyframes being placed.
    With your Timeline Indicator at the beginning of the Timeline and Video Track 2 Image selected, click on the Toggle Animation Icon. That will set the Scale property keyframes
    which at that time will be at a value less than 100% because you are starting with a scaled down Video Track 2 Image.
    Then move the Timeline Indicator to the last frame of the clip. Then move the Scale slider to 100% or whatever % gives you Video Track 2 Image just to full frame so
    that you do not see the Video Track 1 image. Render the Timeline by pressing of the Enter key of the computer main keyboard or pressing the Render button above
    the Timeline.
    All sorts of things can be done by keyframing a property. The property could be other than Scale (some examples might be Position, Opacity, certain effects applied
    to Timeline content, etc.)
    Please review and consider and then let us know if that worked for you. Do not hesitate to ask for clarification if needed.
    Thank you.
    ATR

  • Applying one track's amplitude properties to another

    Hi, I'm fairly new to Audition, and was wondering whether it's possible to apply one track's amplitude properties to a separate track. I've recorded a constant tone, unchanging in pitch, that changes in amplitude. I then have a second track that contains my audio content. At the moment, it contains just pink noise (see image below. Tone is in the top track, noise in the bottom). I was wondering whether there would be any way of masking the amplitude of the noise track with the tone track. I need this for a film project I'm doing; I have a radio in a scene where the camera moves around in one long shot. However, I won't have the final recording for the radio content when I record the shot. Therefore, I want to play a constant tone at a constant volume, and the changes in position of my microphone will result in a changing amplitude to the recorded tone (the whole scene is silent other than the tone, so there will be no erroneous additions to the tone). Could I theoretically then use the tone recorded on set to mask the amplitude of the audio, adding the movement properties to the radio soundtrack?
    Thanks in advance, and I apologise if this is simple; as I said, I'm new to Audition.

    SteveG, I've had a play around sidechaning the tone track to the audio track using the Dynamic Processing effect. It worked wonders! Thanks for your advice; it was most helpful, and solved my issue. I fiddled around with the settings to provide the best match volume-wise, and produced exactly what I was after. Thanks again.

  • Show the page instead of row in page break

    we know, on the bottom of web query, there is the page indicator showing row 24/500, which means the current page starts from row 24(there're 23 rows in a page). And if we click the right arrow button, it will turn to the next page, showing 47/500. Now we want to show this in the format of page, like PAGE 1/22. I think the arrow button works well, but we'd like to show the current page instead of row number.
      any guy knows how to do this?

    I belive you would need to reprogram Table class and use it in your report i/o standard one
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/37289">vitaliy</a>

  • Tracking Hits to a particular image

    Hi,
    My company sends out marketing emails to mass group. We would like to track the number of people who actually opened the emails. For that, I was thinking that if we include a clear gif in email and then whenever anyone would open the email, Portal can track a hit to that image as the image is stored in the content area and any request to an item in the portal's content area should be logged in the activity log. But this doesn't seem to be working. Can anyone please suggest me what should I do? Is there any other method for tracking the number of opened emails?
    Thanks in advance for all your help.
    Regards,
    Jatinder

    I am writing this assuming that you have a IMAGE item, and a URL assciated with the item.
    1. Create a Procedure with item_id as IN parameter,(ex.. REDIRECT_PROC(item_id in NUMBER);)
    2. in REDIRECT_PROC, Select the URL from Portal30.wwvThings table for item_id.
    3. Use owa.util package and redirect to the selected URL.
    4. Before redirection, Insert a record into your metrics table.(You create one table)
    5. while emailing the Image, just send the ProcedureURL with image..
    (ex..http://yourservername:port/pls/your_DAD/REDIRECT_PROC?item_id=11111)
    so when Users click on the image from mail, they will come to this procedure, get the metrics, and then redirected to correspondding URL...
    hope it will help..
    thanks

Maybe you are looking for