Only one PR should be created for 3 months requirement.

Dear All,
In MRP run only 1 PR should be created for three months rquirement ,
Eg: The procurement is done only once in 3 months, means PO is raised only once in 3 months for a material. So now system should create only 1 PR [1 lot] for 3 months requirement.
I have tried to creating a new lot size in OMI4 and i assigned "No of periods" as '3', and assigned in material master, but still system creates PR many PR's. What could be wrong,
Thanks in Advance
Praveen...........

Any inputs ??

Similar Messages

Only one Application can be created at a time?

We are using enhanced model of SAP-WCM and are in the EHP6 version. We have additional applications, in addition to main application. We do not use Work permit.
Our users are creating work approval, applications & WCDs, manually as well as automatically from PM order. During manual creation of an application, if the user selects more than one options, system gives error and allows only one application to be created at a time. If more than one applications are required, he has to create them one by one. Similarly, in automatic creation of WCDs, if there is requirement of additional applications, users have to create additional applications manually.
Our problem is that the user often creates only one application or goes with the auto created applications & WCD, ignoring the requirement of additional applications. We wish that somehow if system can force the user to create additional applications required for a particular job and does not allow to prepare or issue the WCM objects until all required applications are created. For this it is required to first identify which applications to be created.
Our suggestion is, when we go for creation of application, it gives option to select type of applications with check-boxes. All the check-boxes should appear 'checked' by default and user has to 'uncheck' the application(s) not required for the particular job, before pressing OK button. On pressing the OK button, these choices must be stored in some table from where the system keeps track and prompts the user, until all the applications are created.
The experts in WCM are requested to advise if this requirement could be met in our present configuration of WCM. Is it possible using work permit? If yes, how can we implement work permit?
Regards,
M.S.Sachan
ERP-PM Core team

This forum is intended for questions about old, pre-G3 hardware, and doesn't get much traffic. Hence it's not the place where you'll be most likely to get help with your problem. I'd suggest you ask this question in the Mac OS X 10.5 forum; you'll be more likely to get assistance there.
Regards.

Allow only one set of parameter values for all worksheets

I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
Any thoughts...
Thanks,
Jamie

Hi Jamie
Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
Which version of Discoverer are you using?
Best wishes
Michael

How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.

Hi Gurus,
How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.
Thanks
Shobhit Shukla

Hi Shobhit,
Please personalize the self-service page and make that field non-updatable with default value "Confirmed".
Thanks,
Avinash

Creating only one or several invoice smartforms for a global company

Hi,
I'd like to hear your thoughts how smartform development should be arranged for a global company. Let's take an invoice as an example.
A global company has several divisions, company codes, plants and sales organizations. Invoices are printed in different languages in several countries.
Of course it would be better to build exactly one smartform for everything, but on the other hand, the smartform would be extreme complex and difficult to maintain in future, since each company has slightly different requirements for the invoice. On the other hand, it doesn't make any sense to just keep on creating a new smartform for each country, since at the end you will have tens of almost identical smartforms which doesn't sound good either.
What is your experience--should one try to build exactly one smartform for all the company codes, or would it be better to create a new smartform for each company code? In general, I would say that the latter one is perhaps a better approach.
Thanks in advance for your thoughts,
Jarmo Tuominen
Edited by: Jarmo Tuominen on Mar 1, 2008 12:17 PM

My first thought was that it is better to maintain only one form for everything.
However, I am aware that there are also opposite opinions. They explain that creating one form for everything is not the best approach. Because of this, I would like to understand the reasons for that. Do others have any other point of views?

What Indexes should be created for improve performance of the sql query

Hello Admins
One of my user is facing slow performance issue while running the below query. Can someone, please guide me for the same. I want to know, what indexes should be created to improve the performance of this query. Also what else can be done to achieve the same.
SQL Query:-
SELECT UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_NUMBER))),
CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_NUMBER,
CGSBI_SHIP_DIST_S_EXTRACT.PO_SHIPMENT_NUMBER,
CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_SHIP_DIST_NUMBER,
CGSBI_SHIP_DIST_S_EXTRACT.DISTRIBUTION_DATE,
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_SHIP_DIST_LINE_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PROJECT_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ACCOUNT_DISTRIBUTION_CODE))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ORACLE_ACCOUNT_NUMBER))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.COMPONENT_CODE))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.TRANSACTION_CURRENCY_CODE))),
CGSBI_SHIP_DIST_S_EXTRACT.ORDER_QUANTITY, UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ORDER_UOM))),
CGSBI_SHIP_DIST_S_EXTRACT.UNIT_PRICE_TRX_CURRENCY,
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.EXPENSE_TYPE_INDICATOR))),
CGSBI_SHIP_DIST_S_EXTRACT.SOR_ID,
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_CODE))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_DESC))),
CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_LEAD_TIME,
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.UNSPSC_CODE))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.BUYER_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.REQUESTOR_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.APPROVER_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SUPPLIER_SITE_ID))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SUPPLIER_GSL_NUMBER))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SHIP_TO_LOCATION_CODE))),
UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.TASK_ID))),
(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_RELEASE_ID)))
FROM
CGSBI_SHIP_DIST_S_EXTRACT
WHERE PO_NUMBER IS NOT NULL;
I generated the explain plan for this query and found the following:-
Explain Plan:-
SQL> explain plan for SELECT UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_NUMBER))),
2 CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_NUMBER,
3 CGSBI_SHIP_DIST_S_EXTRACT.PO_SHIPMENT_NUMBER,
4 CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_SHIP_DIST_NUMBER,
5 CGSBI_SHIP_DIST_S_EXTRACT.DISTRIBUTION_DATE,
6 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_SHIP_DIST_LINE_ID))),
7 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PROJECT_ID))),
8 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ACCOUNT_DISTRIBUTION_CODE))),
9 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ORACLE_ACCOUNT_NUMBER))),
10 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.COMPONENT_CODE))),
11 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.TRANSACTION_CURRENCY_CODE))),
12 CGSBI_SHIP_DIST_S_EXTRACT.ORDER_QUANTITY, UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.ORDER_UOM))),
13 CGSBI_SHIP_DIST_S_EXTRACT.UNIT_PRICE_TRX_CURRENCY,
14 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.EXPENSE_TYPE_INDICATOR))),
15 CGSBI_SHIP_DIST_S_EXTRACT.SOR_ID,
16 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_CODE))),
17 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_DESC))),
18 CGSBI_SHIP_DIST_S_EXTRACT.PO_LINE_ITEM_LEAD_TIME,
19 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.UNSPSC_CODE))),
20 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.BUYER_ID))),
21 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.REQUESTOR_ID))),
22 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.APPROVER_ID))),
23 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SUPPLIER_SITE_ID))),
24 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SUPPLIER_GSL_NUMBER))),
25 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.SHIP_TO_LOCATION_CODE))),
26 UPPER(LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.TASK_ID))),
27 (LTRIM(RTRIM(CGSBI_SHIP_DIST_S_EXTRACT.PO_RELEASE_ID)))
28 FROM
29 CGSBI_SHIP_DIST_S_EXTRACT
30 WHERE PO_NUMBER IS NOT NULL;
Explained.
SQL>
SQL>
SQL> SELECT * FROM TABLE(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3891180274
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 77647 | 39M| 2006 (1)| 00:00:25 |
|* 1 | TABLE ACCESS FULL| CGSBI_SHIP_DIST_S_EXTRACT | 77647 | 39M| 2006 (1)| 00:00:25 |
Predicate Information (identified by operation id):
1 - filter("PO_NUMBER" IS NOT NULL)
13 rows selected.
SQL>
SQL>
Kindly suggest on this...
Thanks & Regards
-Naveen Gangil
Oracle DBA

Rafi is correct. Since po_number is the filter column, the only chance you have for using an index to access the table is on that column. However, if there are few (or none) rows with null po_number, you will always have FTS. Does the table have a PK ( which probably consists of at least po_number, line_number )? If that is the case po_number could never be null and in which case you are dumping the whole table and no indexing scheme is going to improve the queri's performance. You might, repeat might, see performance improvement if you cleanse the data in the table ( to eliminate the need for UPPER(LTRIM)RTRIM())) ) before querying it so the the data does not have to be massaged before returning it.

What One Specification Should I Look for When Buying Optical 5.1 Speakers for the iMac 27" i7?

Hi. I have an analog 5.1 (it came from my previous PC setup) now but only the subwoofer works, the controller for its satellite speakers maybe have been busted by the high voltage from the outlet (I've since gotten a nice AVR). If replace it since the late 2009 iMac and Macs in general only do surround sound (5.1 or higher) if it's not analog. I've read somewhere that is should be digital or optical.
When I look for the specification that'll make this Mac do 5.1 surround, what should I look for in the speaker's specifications. I believe the non-analog 5.1 speakers are way more expensive, I'll probably buy one used but what brand and model can anyone recommend that's not that expensive, iMac/Mac compatible and will be easy to setup (you just plug it in into it's the headphone jack at the back) that'll do 5.1 on Lion and Snow Leopard (I have both installed for backup OSes and experiments). Thank you in advance.
Gbu.

Make sure the activation lock has been removed
Find My iPhone Activation Lock
This will help determine if it has been removed
Apple's new iCloud tool can show if a used iPhone is stolen
Make sure it is not broken and it works, including the headphone jack and speakers.
Make sure the liquid indicator by the headphone jack is not red/pink
iPhone and iPod: Liquid damage is not covered by warranty - Apple Support

How many GOLDEN GATE extracts should I create for 300 schemas

I have a question.I have 300 schemas and each schema has at least 120-130 tables which are not too big.I have to replicate all the schemas.What would be the best way to do it we have to also consider the memory we don't have much of memory available on source.I mean how many extract should I create.since it is also possible to create only one extract and we can add all schemas. what would be the best possible suggestion.should I create multiple extract lets say 10-20 and divide between them.or a single schema would be ok ??.
can anyone suggest me something !!!
Thanks in advance...

The limit of 300 processes (extract and replicats) per manager as raised to 5000 in v11.2.1.
You could certainly have 10 extracts:
Extract 1
Schema1.*;
Schema2.*;
etc
Extract 2
Schema31.*;
Schema32.*;
etc
The main things to think of:
Are their transactions that span schemas? Those should be in the same extract.
Can the extract keep up with the volume from those 30 (or more) schemas?
If I have to do maintainence on one schema and have to bring down the extract... are the other 29 schemas ok with this?
Maybe the volume is such that you can put all 300 in one extract?

Only one Currency should be allowed..........

Dear Experts,
How can we make only single currency to be allowed to enter in the sales documents - sales orde / invoice ???
Eg. If we want to create order only in INR and should not be created for any other currency than INR, how we can achieve this??? Is it possible to make iin SAP standard?? Or do we have to go for any programming ??
Thanks in advance
Sagar

Dont think, anything is available to achieve this in SAP standard. You can make the document currency field on the sales document non editable by doing code changes in USEREXIT_FIELD_MODIFICATION in program MV45AFZZ . Thanks

Only two days should be available for posting

Hi Experts,
Client wants only current date and previous date ( current - 1 ) to be allowed for posting. Is it possible in SAP? Please help me.
Regards
Santosh Hegde

Hi Bhaskar,
Thanks... my requirement is like thi, Today is 16.08.2007, I dont want user to post any docyment prior to 15.08.2007 or on 17.08.2007. That means only yesterday and today should be open for posting.
I am aware of posting period open and close and entire month being allowed for the posting.
Let me know if this is possible...
Regards
Santosh Hegde

How to give only one function module execution Auth for a User ?

Dear Experts
I have reviewed S_DEVELOP auth object. It is not ful filling my requirement
Any Ideas !!
Rgds

Rakesh...Firstly thanks for reply.
As i said i reviewed these and found it is not meeting my requirement.
As we aware We can control auth to Function modules thru object type
Filed OBJTYPE----
FUGR --> 1st control
and with Function Group Name
Field OBJNAME----
<Function Group Name> --> 2nd control
In my scenario - I have given the authroizations as below
++++++++++++++++++++++++++++++++++++++++++++++++++++
ACTVT            Activity                                                 Display, Execute
DEVCLAS       Package                                               *
OBJNAME      Object name                                         ZECC_FG
OBJTYPE       Object type                                           FUGR
P_GROUP       Authorization group ABAP/4 pro              *
++++++++++++++++++++++++++++++++++++++++++++++++++++
The above authroization is giving all Function modules authrozation under ZECC_FG Function Group.
My Requirement
I shoudl be able to give only one Function Module of a Function group where multiple function modules exist under the same Function Group.
How can i acheiveit. Any Custom Control can be place to acheive this.
I am sure S_DEVELOP will not solve my requirement (I Beleive)
Regards

What query should be created for this case

Here are those classes:
Folder{
    String name;
    @ManyToOne
    Subject owner;
Subject {
    String name;
}What query should I create in order to: find out if there is an actual Folder for a Subject with the name X in the database ?
Actually, the question is kinda stupid, but im not experienced with queries....

javaUserMuser wrote:
Here are those classes:
Folder{
String name;
@ManyToOne
Subject owner;
Subject {
String name;
}What query should I create in order to: find out if there is an actual Folder for a Subject with the name X in the database ?Can't tell based on the info you posted. These are Java objects, and queries deal with relational tables.
Your naming is confusing. Subject and owner are two very different things.
If I had two tables like this:
CREATE TABLE IF NOT EXISTS owners
    owner_id bigint not null auto_increment,
    name varchar(80),
    primary key(owner_id)
CREATE TABLE IF NOT EXISTS folders
    folder_id bigint not null auto_increment,
    name varchar(80),
    owner_id bigint
    primary key(folder_id),
    foreign key(owner_id) references(owners)
);I'd write the JOIN query this way:
SELECT f.name, o.name
FROM folders as f, owners as o
WHERE o.owner_id = ?
AND o.owner_id = f.owner_idYou realize, of course, that if you're using EJB3 as the annotations suggest, that you don't write any SQL. EJB3 generates it dynamically for you.
%

I need a gaming keyboard for my mac but the only ones I can find are for Windows, there is no Command button or FN button. Any suggestions?

So, I have an OS X 10.7.5 and I want to get a gaming keyboard, but the only good ones I can find are for windows. I know because they have the Windows home key button, and no FN button or Command button. Any suggestions?

Normally, most Windows-compatible keyboards are also compatible with Mac OS X. If I'm not mistaken, the Windows key (the key with the Windows icon) is the command key. Also, if you do need to use the F1-F12 keys as standard function keys (you would normally hold FN and then press the button), you can set them to standard function keys in System Preferences. There may be some good gaming keyboards on the market that use the Mac layout, but most may use a Windows keyboard. Personally, I prefer the Mac keyboard on my Macbook. I hope this helps!

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

It seems I'm the only one DownThemAll doesn't work for, as it only downloads the html, never the content, despite trying thousands of different configurationsnt

I am a frequent downloader, and everywhere I search, people are raving about downThemAll. But I can not get any results out of it, as it will only download junk files. I can't believe no one has experienced this. Can you help? Thank you

gerrydee@tesco .net wrote:
after downloading maverick,which stopped halfway through,installed new harddrive on which i installed lion 10.7.5. couldn't re-install iphoto as my os was not above 10.8 yet i had it on 10.7 previously.along with other programs.restore from my backup worked along with everything i had before but slowly - over a period of startup and sleep a variety of problems arose preventing me from not using programs. for instance : instruction to download iphoto from app store again - then it tells me app store not available.it seems almost as if some joker is sharing my computer to deliberately prevent me from achieving anything.
anybody else get this sort of problem? how do you sort it? without huge expenditure which apple seem to expect.
i'm only a customer after all. gerry
Reinstall the backup you made before choosing to update Mavericks.
OS X Mavericks: Revert to a previous OS X version
Cheers
Pete

Only one PR should be created for 3 months requirement.

Similar Messages

Maybe you are looking for