Only two of my four signatures will reflect as options my e-mail

I have four signatures set up as options on Mac Mail. However, when I write an e-mail only two of them are accessible to choose from. How do I access the other two? I'm running Lion 10.7.5 on a Mac Baook Pro.

see threads
https://discussions.apple.com/message/1853788#1853788
https://discussions.apple.com/message/4995636#4995636
https://discussions.apple.com/message/2154265#2154265
http://support.apple.com/kb/PH11696

Similar Messages

HT1420 why do I only see two of the four movies on my second authorized device and only two of the four TV series that I have purchased?

Hello,
I have a Dell laptop that I have purchased many TV shows and Movies. All are present on my Dell Laptop. I was recently given a Windows Tablet at work and opened my ITunes account only to find that just two TV shows that I purchased are available to watch, and the only movies that I can see are the two that I got as free downloads when purchasing the movie on DVD.
How do I go about being able to access all my purchases on my new tablet?
Thanks
David

One of the two photos is the HDR version. The other is the normal picture without HDR.
To eliminate the normal photo from being save see Settings > Photos and Camera > Keep Normal Photo and turn OFF.

HT4279 Only two screens will work on my 5870 Radeon

I have a 6 core 3.33Ghz Mac pro running latest lion software. Just fitted a 5870 Radeon.
Only two of the three screens will work at any one time. A 24" Apple Cinema HD (Dvi) and two Dell 1708FP (these have an DVi to mini port adaptor each).
I have swopped them round to all possible configurations. Changed leads etc etc.
Can anyone help please

To get three screens to work with adapters, all adapters must be ACTIVE, POWERED adapters. Apple Dual-Link adapters for this job work fine, but are pricey. These are more that ATI has tested:
http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx
Adapts: Mini DisplayPort™ To: DVI-D Single Link Active
AMD Status
Manufacturer
Part Number
Max. Resolution
Purchase
Gold
Accell
B087B-006B
1920x1200
Buy Now
Gold
Bizlink
KS30015-131
1920x1200
Coming Soon
Gold
Startech
MDP2DVIS
1920x1200
Buy Now
Gold
Wieson
G9858C219-006-H
1920x1200
Buy Now
Many are available on Amazon, but shop with great care, as Amazon's search is "fuzzy" and will include stuff that does not quite match (and will not quite work).
This one is US$32 with super-saver shipping:
http://www.amazon.com/Accell-B087B-006B-DisplayPort-Single-Link-Certified/dp/B00 4071ZXA

Does TM2 support only two fingers gesture?

For HP support staffs & other Tx2/Tm2 gurus out there:
Hello, I am considering getting a Tm2. However, I read on the web somewhere that the tm2 only supports two finger gesture. This confuses me because the older Tx2 apparently supports up to four finger gesture after installing this driver:
ftp://ftp.hp.com/pub/softpaq/sp47001-47500/sp47485.exe
<<link thanks to Zirdaj response on March 4th>>
Just to confirm if it's only two fingers for Tm2 and if so, will there be any plan by HP to introduce a driver that will allow the TM2 to support more than two fingers? Would be a shame if they don't as I plan to use Bumptop a lot, and 2 fingers limitation would severely limit the gesture inputs. Thanks!

THANKS Thomas it works!!!!!!
This is the fixing code:
<script type="text/javascript">
document.addEventListener('touchmove', function (e) {e.preventDefault();}, false); document.addEventListener('touchstart', function (e) {e.preventDefault();}, false);
document.addEventListener('touchend', function (e) {e.preventDefault();}, false);
</script>
STILL MANY MANY THANKS!
Davide

I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account?

I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account? I have been able to log into what appears to be three of the four iCloud accounts I have. Two of them seem to be remarkably similar, and one appears to be only for my MacBook.I think I know which one my iPhone is backing up to, as I successfully restored from a back-up last week. The fourth iCloud account I can't access via password or security questions. Any advice would be much appreciated.
Thanks.
Cheers,
Aaron
Melbourne, Australia

You cannot merge accounts.

"Invalid annotation object" on only two of six computers.

When searching for the resolution to this error I keep seeing that the PDF is corrupt when people get the error "Invalid annotation object". But I have a office that has eight workstations and only two are getting the error. To further complicate issues I downloaded Adobe Reader on one of the machines and it does not get the error either. All of the machines on the network are using Adobe Acrobat 9.
The steps we have taken to try to resolve the issue on one of the computers:
Ran the repair of Adobe from the help.
Checked for updates. None were found, it was fully updated.
Downloaded malware scanners - RKill, Malwarebytes and AdwCleaner. All found nothing.
Removed Adobe Pro and tried Adobe Standard.
After all these steps we still get the error on the machine, but if we go to the computer in the next room it will open it fine with no errors. We can also open the same document on that computer with Adobe Reader and get no errors.
One way to bypass the error is to use the arrow keys to navigate the document. The error only happens when navigating by using the mouse.
Any and all help would be greatly appreciated.
Thank you.

Jenny,
Look at where the problem computer is getting its time/date from (System Preferences>Date/Time), then compare that to one of the functional computers. It might not be syncing up with the Exchange server time-wise, which will cause problems.
Good luck

Making calculations in QueryDesigner using only two decimals

Hi,
I need to make a calculation in a bex analyzer query, using only two decimals.
Ex.
A = 10
B = 3
C = 1000
D is a variable.
In a query, the following calculation: A/B = D | D*1000
Results in the following: 3333
But if D only had two decimals, the result would end up as = 3330.
I know I can control the number of decimals <u>shown</u> using properties, but this won't change the number of decimals actually used for the calculation.
Anyone got an idea ?
-Tone

Tonni!!
if 3333 if you put two decimal place it will put 3333.00 but not rounding, if you need rounding then that is different, 3333.51 will be rounded to either to 3333.00 or 3334.00
thanks.
Wond

Sccm 2012 Only two actions on cleints actions can not find any errors

We have deployed sccm 2012 sp1 with cu2
everything was working ok then it all suddenly it stopped working for new client's . The client installs ok but there are only two action in on the client actions. Clients find the site code ok and logs look ok as far as we can tell
We did move are dns from windows hosted dns to a third part appliance around the same time but all cleitns still have vlid dns entries . the managmeopt point is still in the underscore records in dns
we have checked ClientLocation.log, LocationServices.log, ClientIDManagerStartup.log and ccmexec.log and there are no errors we can see.
the sccm console reports all services as green
We are running with PKi all certs are still valid and new clients are still receiving valid certficates
any ideas or pointers?
Rick Cross

Hi we fixed this this in the end by this incase its any help to any one else
look in the MP_Policy.log on the site server
see if you have any these errors
Detected at least one row in the result set from PolicyAssignment table which does not have a Signature, rejecting all rows.
if so connect to the sql server and run this sql
run this check
SELECT * FROM ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
if any errors found run this
To delete:
Delete FROM ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
then rerun check
as per this
http://social.technet.microsoft.com/Forums/en-US/cfbfdc2a-81b7-4b69-948b-361f5d66515e/sudden-issue-with-client-communications-in-sccm-2012?forum=configmanagerosd
Rick Cross

Only two events catching

Hi All!
I'm an absolute beginner in making programs to SBO.
I wrote any little trial program in VB6 (and Delphi5), but I have a problem the events handling (of course...).
By the samples I use the code as below:
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, pVal As SAPbouiCOM.IItemEvent, BubbleEvent As Boolean)
    If pVal.FormType <> 0 Then
        Select Case pVal.EventType
            Case et_ITEM_PRESSED:
                SBO_Application.MessageBox ...
            Case et_KEY_DOWN:
                SBO_Application.MessageBox ...
            Case et_GOT_FOCUS:
                SBO_Application.MessageBox ...
            Case et_FORM_LOAD:
                SBO_Application.MessageBox ...
            Case etc...
        End Select
    End If
End Sub
Every time only two event catching: et_GOT_FOCUS and et_FORM_LOAD after the start, and not others.
How can I get to catch the et_ITEM_PRESSED (there is a button on the form), etc. event?
(Note1: This programs not registered as add-on.)
(Note2: We have not yet SDK, the media is coming soon.)
Best regards
Gabor
PS.: Sorry my terrible english!

Gabor,
the program needs to be registered with SBO, otherwise SBO cannot hand over the events (as far as I know). You probably just need to wait for your SDK ;(
When you start, make sure that your first if- clause is
If pVal.Before_Action = True
otherwise you will get a lot of events twice (once before and once after event).
Here is a quick sample of a handler I use.
HTH Lutz Morrien
Public Overrides Sub HANDLE_FORM_EVENTS(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean)
    Try
      If pVal.Before_Action = True Then
        Select Case pVal.EventType
          Case SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE
            'update display
            DisplayLabels()
        End Select
        'AFTER ACTION
      Else
        Select Case pVal.EventType
          Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
            Select Case pVal.ItemUID
              Case "btnPRINT"
                PrintLabels(True, False)
              Case "btnPRNTS"
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Minimized
                PrintLabels(False, False)
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Maximized
              Case "btnEDIT"
                EditMarkedLabel()
              Case "btnDELETE"
                DeleteMarkedLabel()
              Case "chkALL"
                SwitchMarkOnAllRows()
              Case "btnPREVIEW"
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Minimized
                PrintLabels(True, True)
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Maximized
            End Select
        End Select
      End If
    Catch excE As Exception
      SBO_Application.MessageBox(excE.ToString)
    End Try
End Sub

PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times..

Started in Preview to save...but PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times.

I am having the same problem with signatures. I am including a form in a pdf portfolio to collect signatures from different users who have Reader. I make sure that features have been extended for reader. Most of the time they are okay. But every once in a while (at least one every two weeks) I get a user telling me they can't sign. No message or error of any kind, just a quick blink but no signature. As a work-around I've had to save a copy and re-extend features. This can be time consuming when there are a few documents I need to circulate. Please advise.

Is object has only two states?

Hi!
Let's have two classes:
class MyClassA {
private MyClassC objAnyC = null;
private MyClassB objAnyB=null;
// initialize objects
public void doAny() {
// do anything
objAnyC = objAnyB.getAnyC(); // row 100
objAnyC.someMethodC(); // row 101
class MyClassB {
private MyClassC objC = null;
public MyClassB getAnyC() {
// do anything
return objC; // row 200
Q#1.
If in row 200 we get correct object (objAnyC) we can call methods on this object, row 101. OK!
Let's any reasons on row 200 we can not return correct object.
As result on row 100 , the object objC will be null.
Does object objC always null in this situation (context) ?
Q#2.
If we have some object
e.g. AnyClass : objAnyClass
can I assert that object objAnyClass can have ONLY two states:
- objAnyClass = correct object (correct pointer to the object in the heap);
- objAnyClass = null;
Am I right?
Thank you.

I'll take one more stab:
If you're asking if a reference must always either
1) be null
or
2) point to a completely constructed object
that is--a reference can't point to arbitrary memory or a corrupt object
Then the answer is--sort of.
You can't point a reference at arbitrary memory, and under normal circumstances, you won't end up pointing at an object that's in an invalid state. However, it is possible to point to a bogus object. That's usually the result of poor coding practices. I'm not going to go into details now, since I don't even know if that's what you're asking, but one key point to remember is "don't let the 'this' reference escape from a constructor."

FAGLB03 - Restrict user access to view only two GL accounts.

We want certain users to access only two GL accounts using transaction FAGLB03. Any help will be highly appreciated.

Hi
I do not think we have any authorization object based on GL Account value for T Code FAGLB03. However, you could probably write an FI validation rule based on GL Account No and user id. You can maintain the user id in a set
Prerequisite
Company Code = XXXX and System T Code = FAGLB03 and GL Account = XXXXXX
Check User ID = ABCD
If the check fails, system should throw an error message
Regards
Sanil Bhandari

Need only two decimal places, but BigDecimal isn't working

Hello again. This time I've got a problem with getting only two decimal places. I tried using BigDecimal but when I compile it, I get an error "cannot find symbol class BigDecimal" and a "cannot find symbol variable BigDecimal".
Grrr... I just want my value to have only 2 decimal places before it ends up in my text field.
Any help will be appreciated.
- Phonse
if (ostuff1.equals("amt tendered"))
                 finalamt = total1 * 1.12;
                 change = cash1 - finalamt;
           BigDecimal finalamt2 = new BigDecimal(finalamt);
              finalamt2 = finalamt2.setScale(2, BigDecimal.ROUND_DOWN);
              BigDecimal change2 = new BigDecimal(change);
              change2 = change2.setScale(2, BigDecimal.ROUND_DOWN);
              finalamt = doubleValue(finalamt2);
              change = doubleValue(change2);
                 addItem(String.format("Amount Tendered:          "+"P "+finalamt));
                 addItem(String.format("Change:                     "+"P "+change));
               }

@ georgemc
Isn't it better to import whole packages instead so
you can have everything available when you call them?
I mean, it's kinda hard to import individual classes
everytime you need to call them.No. You can get conflicts when importing complete packages. If you importjava.awt.*;
java.util.*;and then declareList list;the compiler does not know which List you meant, java.util.List or java.awt.List.
Offtopic @ prometheuzz
LOL. When I was a kid still playing my Playstation I
wanted to have a career in computers when I got to
college. Now I'm 14 and a 3rd year high school
student and I just got a reality check -- computers
just isn't for me. And alot of those professionals
say Java is the "easiest" programming language. O_O
Meh. I'll just follow my other dream of becoming a
chef. Just seems like my parents won't like it...
Bleh... Two more years... Two more years...Sure, but if you like programming, work (hard) for it. Most people have to work hard in order to become good at something, no one is born as a programmer. This goes for becoming a chef as well.

Allow to create, only two objects for a class

Hi,
This question is asked in my interview. In singleton concept only one object is created, likewise only two objects are created for a class.
For that i have write a code like this,
public class OnlyTwoObjects {
     private static OnlyTwoObjects a1;
     private static OnlyTwoObjects a2;
     public static int n = 0;
     public static OnlyTwoObjects getInstance() {
          if (a1 == null) {
               a1 = new OnlyTwoObjects();
               return a1;
          } else if (a2 == null) {
               a2 = new OnlyTwoObjects();
               return a2;
          } else if (n == 1) {
               return a1;
          } else if (n == 2) {
               return a2;
          return null;
} But they told this is not good way to do this.
I don't know how to do this, if any body knows kindly let me know.

vijay wrote:
But i will explain my code, in that code we are allowed to create only two objects, Maximum. Understood.
suppose both objects are created, then i will ask which object you need first or second, this is decided using the variable n if it is 1 then it will return the first object and it is 2 it will return the second object. sorry i didn't explain this in my previous post.This is your approach. Is this the requirement as well? Is it necessary that the user decide on which instance (first or second) is returned?Even if it was the requirement that the user decides which instance (first or second) is returned, with the original proposed implementation, the user only gets to decide which instance after calling getInstance() twice. If he calls getInstance() with n=2 when a1 is still null, he still gets a1. If he calls getInstance with n=1 when a2 is still null but a1 is non-null, then he gets a2. As is, he always gets a1 on the first call, a2 on the second call, and after that gets null unless he has set n to 1 or 2. (This explanation ignores any multi-threading issues that may come into play. This explanation is for a single thread.)

Print-only Policy Restrictions with Digital Signature

I'm trying to lock down all form fields on a PDF document and add a digital signature. Is this possible? I don't see a Document Restrictions option in the drop-down menu that enables Print capability ONLY as a Policy setting. There doesn't seem to be a Security setting which enables me to allow Printing that doesn't also enable field and/or comment editing as well. Is there a way to edit the Registry or some other workaround that facilitates this kind of signing and policy restrictions?
Thanks for your help!
System:
1. Acrobat v.7.1 Professional
2. Windows XP
3. Word document converted to PDF
4. Interactive Form Fields
5. Digital Signature Field

I think I may have discovered a work-around for this problem. If you Secure (lock) all the interactive fields BEFORE adding your Signature field and signing the document, the changes won't take affect until you save and/or close the document. You can therefore add a signature field (or make any other changes you wish), and subsequently sign the document as long as you haven't saved it. Once you click Sign and Save on the signature pop-up window, the security changes as well as the digital signature will all take affect simultaneously.
Hope this helps someone!

Only two of my four signatures will reflect as options my e-mail

Similar Messages

Maybe you are looking for