OOPS A TECHNICAL ERROR OCCURRED

Why must it be so very difficult with all those installations of softwares? Some clever technicians should look at this. Ok it is certainly so that we customers are doing something wrong. But let us know that when we do an installation. And tell us exactly what to do instead of OOPS A TECHNICAL ERROR OCCURRED.
I try to install Flash Player on my new mac book pro that has OS X 10.9 installed. The whole setup works perfectly. But when I try to play music on for example Google Play nothing happen. You get this stupid message OOPS A TECHNICAL ERROR OCCURRED Yes, I understand that too. BUT WHAT EXACTLY IS WRONG! I do the same setup in my iMac with OS X 10.8. The installation is carried out in the same unproblematic way. Additionally, Flash Player works perfectly in Google Play music.
My question is: What am I doing wrong with my attempt to install the Flash Player in OS X 10.9.
Unfortunately, it's often the case that when these eternal updates such as OS X is done, not all programs or devices connected to the computer compatible with the new software. My large format printer stops almost always operate at an update of a new operating system. Because the new operating system is not compatible with my printer and you had to wait for a new update for your printer.
I look forward to an "one click" installation.
Mr Lerin

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Similar Messages

Technical error on Lookup in ccBPM

Hi,
After we patch Pi server form sp14 to 23 we get error :
Technical error occurred during Lookup in ccBPM
And on TCO SLG1 - Application log is "Alert category ZFI-CAX_LOOKUP does not exists".
Any help.
regards

Hi spantaleoni,
Thanks for reply, I am new on PI, Can you explain what you mean by But the alert category still exist??.
I patch Pi installation and now We have problem on ccBPM flow to RKI (Lookup Company))
On SLG1 - Application log I have som red entry :
Alert category PROCESS ALERT does not exist Message no. SALERT012 and
Alert category ZFI-CAX_LOOKUP does not exist Message no. SALERT012. It is the only massages I have .
Regards

BDOCs in status E01 - Technical Error

We are using CRM 7.0 with service order.
We have BDOCs that created automatically after creation of service order or changing in BP details and got stuck in the system and were not processed (SMW03) .
The BDOCs types:
BUPA_MAIN
BUS_TRANS_MSG
These BDOCs entered into queues in SMQ2 in status ready.
In order these BDOCs will be read automatically, we registered the queues which started with CSA* in SMQR.
Unfortunately, the BDOCs still not processed and now in status E01 u2013 Technical Error (incomplete).
The messages are for each type (BUPA_MAIN and BUS_TRANS_MSG respectively) are:
u201CCould not determine module name: BUPA_MAIN GENKEY: REP_GET_RECIPIENTu201D
u201CService that caused the error: SMOH_REPLICATION_WRAPPER_MSGu201D
Could not determine module name: BUS_TRANSACTION_MESSAGE GENKEY: REP_GET_RECIPIENTu201D
u201CService that caused the error: SMOH_REPLICATION_ERAPPER_MSGu201D
It is important to mention that these BDOCs were not deleted in order not damage data that suppose to be uploaded to the BI.
Due to security issues, we cannot provide connection to the system.
Please advice
Best regards,
Hanoch Aharoni

Hi Hanosh
Please see bleow, this is an extract from very helpful document attached to note 768503 for the E01 bdocs status:
Description
Technical error. If any of the flow services fail a technical error is raised. Possible reasons
for that error are:
- Data inconsistencies (e.g. between CRM and CDB)
- Implementation and programming errors
- Missing functionality (implementation problems)
Inbound
s-flow
(SI1)
Detection:
Select BDoc message, click button u2018Errorsu2019 and u2018Classical Datau2019
Possibly the inbound s-flow definition (transaction SMO8FD) is not correct
(services do not exist or have syntax error) or the rejection handling in case
of validation errors is not correct.
Solution:
- If no validation errors and no receiver errors exist, retry to process the
message. Otherwise (if no retry possible) correct the error, send the changes
from the sender site (usually Mobile Client) again if possible or request the
data from the leading system to the different receivers and mark the original
failed BDoc message to u201Cdeletedu201D.
Inbound
m-flow
(MI0)
Detection:
Select BDoc message, click button u2018Errorsu2019:
- No validation function defined for BDoc type
- Technical error occurred: Service (usually validation service), BDoc type <>,
BDoc <>
Solution:
Check in table SMW3BDOCIF if the validation module is entered for the
BDoc type. If no retry is possible correct the error, request the message from
the sender system and set the original failed BDoc to u201Cdeletedu201D.
If the error occurs during the call of the validation module, start the
debugging mode, restart the BDoc processing and put a breakpoint at the
validation module. This requires knowledge in the implementation of the
validation module (and application logic). Look for notes related to that
function module, if this is a SAP standard function.
E01
Outbound
m-flow
(MO1)
Detection:
Select BDoc message, click button u2018Errorsu2019:
- Technical error occurred: Service <>, BDoc type <>, Message <>
- Service that caused the error: <>
Solution:
Find a solution to the errors that occurred, for example through SAPNet Note
search or opening a SAPNet problem message on the corresponding
application component. The right application component can be found in the
corresponding properties of the package where the service is implemented
(use transaction SE37 to display the attributes of that function module).
Possibly there is something wrong inside the Mobile Bridge or in the following
services of the s-flow (like CDB update).
Re-process the message (this is allowed for testing purposes; be careful in
the case of a production system, especially if the data in the BDoc message
is not current) or request the data from the sender or from the original system
(this is usually possible for master data but not always for transactional data).
==================================================================
Best regards
Christophe

WCEM:clicking on custom button(Excel Downlaod) giving message "An error occurred; please try again. If the error persists, please contact technical support."

Hi Expert,
I need help.
I created a custom button to download data to an excel sheet. after clicking the button I am getting message
"An error occurred; please try again. If the error persists, please contact technical support.".
I tried debugging WCEM, but it is not even reaching that point.
Your help will be highly appreciated.
here is the code.
BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
UI-repository.xml
<ViewComponent name="BITContentView" componentHandlerClassName="com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl.BITDetailViewVCHandler"/>
BITDetailViewVCHnadler.java
package com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl;
import com.cpr.cprwec.app.comm.module.ebpp.backendobject.interf.EbppBackend;
import java.io.IOException;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.List;
import javax.faces.context.FacesContext;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.impl.EbppModuleAccessImpl;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.interf.EbppModuleAccess;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.DisputeDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.OpenItemDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.DisputeDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.OpenItemDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDetailDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDetailDTO;
import com.sap.wec.app.common.module.common.attachment.businessobject.interf.Attachment;
import com.sap.wec.tc.core.backend.sp.jco.JCoConnection;
import com.sap.wec.tc.core.businessobject.BusinessObjectException;
import com.sap.wec.tc.core.common.exceptions.ApplicationBaseRuntimeException;
import com.sap.wec.tc.core.common.logging.WCFLocation;
import com.sap.wec.tc.core.common.searching.businessobject.impl.GenericSearch;
import com.sap.wec.tc.core.common.searching.businessobject.interf.GenericSearchReturnResultData;
import com.sap.wec.tc.core.common.util.GenericFactory;
import com.sap.wec.tc.core.common.util.Message;
import com.sap.wec.tc.core.common.util.MessageList;
import com.sap.wec.tc.core.common.util.table.Table;
import com.sap.wec.tc.core.common.util.table.TableRow;
import com.sap.wec.tc.core.modulemgmt.ForeignModuleAccess;
import com.sap.wec.tc.core.modulemgmt.ModuleAccess;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleInactiveException;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleLifecycleException;
import com.sap.wec.tc.core.runtime.WecFrameworkRuntime;
import com.sap.wec.tc.core.runtime.WecSession;
import com.sap.wec.tc.core.runtime.jsf.WecFrameworkRuntimeJSF;
import com.sap.wec.tc.core.runtime.jsf.composition.PageManagerBean;
import com.sap.wec.tc.core.runtime.navigation.NavigationCondition;
import com.sap.wec.tc.core.ui.composition.menu.MenuManager;
import com.sap.wec.tc.core.ui.composition.menu.MenuMetadataException;
import com.sap.wec.tc.core.ui.vc.BuildTime;
import com.sap.wec.tc.core.ui.vc.NavigationParameterBinding;
import com.sap.wec.tc.core.ui.vc.RequestParameterBinding;
import com.sap.wec.tc.core.ui.vc.impl.ViewComponentHandlerBaseImpl;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.interf.BIT;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.impl.BITImpl;
public class BITDetailViewVCHandler extends
 ViewComponentHandlerBaseImpl<EbppModuleAccess> {
 protected static final WCFLocation LOCATION = WCFLocation
 .getInstance(BITDetailViewVCHandler.class.getName());
 public BITDataDTO bitDataDTO;
 public BITDetailDTO bitDetailDTO;
 public List<BITDataDTO> BITDataDTOList;
 public List<BITDetailDTO> BITDetailDTOList;
 public boolean noBITData;
 public boolean noBITDetail;
 public boolean renderPanel = true;
 public boolean isDownloadBITData;
 public boolean isDownloadBITDetail;
 public boolean downloadStarted=false;
 public boolean BITFound =false;
 public boolean isBITFound() {
 return BITFound;
 public void setDownloadStarted( boolean downloadStarted ){
 this.downloadStarted = downloadStarted;
 public boolean getDownloadStarted(){
 return this.downloadStarted;
 public void setBITFound(boolean BITFound) {
 this.BITFound = BITFound;
 public String getObjectID() {
 return objectID;
 public void setObjectID(String objectID) {
 this.objectID = objectID;
 public List<BITDataDTO> getBITDataDTOList() {
 return BITDataDTOList;
 public List<BITDetailDTO> getBITDetailDTOList() {
 return BITDetailDTOList;
 public Boolean getNoBITData() {
 return noBITData;
 public Boolean getNoBITDetail() {
 return noBITDetail;
 public Boolean getRenderPanel() {
 return renderPanel;
 private static final int DEFAULT_BUFFER_SIZE = 1024000;
 public Attachment attachmentData;
 public Attachment getAttachmentData() {
 return attachmentData;
 @RequestParameterBinding(maxLength = 1024)
 protected String objectID;
 @BuildTime
 public String processBuildTime() throws BusinessObjectException {
 BIT BIT = null;
 noBITData = noBITDetail = false;
 renderPanel = true;
 if (isLoggedIn()) {
 if ( isDownloadBITData == true ){
 this.downloadBITDataExcel();
 else {
 this.getModuleAccess().getBITBO().clearMessages();
 BIT = this.moduleAccess.getBITBO().getBITFromBackend(objectID);
 BITDataDTOList = BIT.getBITDataDTOList();
 BITDetailDTOList = BIT.getBITDetailDTOList();
 MessageList objectData = this.getModuleAccess().getBITBO()
 .getMessageList();
 if (objectData.size() > 0) {
 noBITData = noBITDetail = true;
 renderPanel = false;
 this.addMessageList(objectData);
 return checkLoginCondition();
 private boolean isLoggedIn() {
 return checkLoginCondition() == null;
 private String checkLoginCondition() {
 NavigationCondition navCondition = getNavigationCondition("login");
 if (!navCondition.isFullfiled()) {
 navCondition.addToNavigationStack();
 return navCondition.getOutcome();
 return null;
 public String downloadBITData(){
 downloadStarted = true;
 isDownloadBITData = true;
 downloadBITDataExcel();
 return checkLoginCondition();
 public void downloadBITDataExcel() {
 // dummyDebug("downloadBITDataExcel", BITDataDTOList.size(), "", "" );
 if (BITDataDTOList.size() > 0) {
 try {
 attachmentData = this.getModuleAccess().getDownloadBO()
 .getBITDataExcel(BITDataDTOList);
 if (attachmentData != null) {
 FacesContext faces = FacesContext.getCurrentInstance();
 HttpServletResponse response = (HttpServletResponse) faces
 .getExternalContext().getResponse();
 response.reset();
 response.setContentType(attachmentData
 .getAttachmentMimeType());
 response.setContentLength(attachmentData
 .getAttachmentContent().length);
 response.setHeader("Content-disposition",
 "attachment;filename="
 + attachmentData.getAttachmentName());
 response.setBufferSize(DEFAULT_BUFFER_SIZE);
 ServletOutputStream out;
 try {
 out = response.getOutputStream();
 out.write(attachmentData.getAttachmentContent());
 out.flush();
 faces.responseComplete();
 } catch (IOException e) {
 throw new ApplicationBaseRuntimeException(
 "Problem opening file", e);
 } finally {
 attachmentData = null;
 } catch (BusinessObjectException e) {
 e.printStackTrace();
 isDownloadBITData = false;

Thanks Hamendra for checking the issue.
I am setting up breakpoints in WCEM, tab JAVA EE then from menu RUN->Toggle brekpoints and then debug configuration.
the breakpoints are in several places in handler class BITDetailviewVCHandler class including method downloadBITData.
this method I am calling from BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
When the BIT page is loading the control stops at the breakpoint.
but it is not stopping there when i click the 'Excel Download' button.
How do I get the log file. I am very new to WCEM, please guide me.
I tried to debug the UI using Google chrome. it is giving me the following error.
POST https://<>/<>/<>/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US 500 (Internal Server Error)
when I expand the node
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66
(anonymous function):<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:30
c.extend.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:24 c.fn.c.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66 c.fn.extend.trigger:<>/<>/javax.faces.resource/<>dev/comp.theme/templates/jquery/js/commandButton.js.jsf:31
com.sap.wec.commandButton.submitForm:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&objectID=500000233&page=D61CFFF8E75D48A1B348F315D209EFF9&wec-locale=en_US:48 onclick
Navigated to https://wsapdjd803.<>.ca:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US
Seems to be it is failing somewhere commandButton-related JavaScript functions
Thanks
Subassish

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. Thanks

I keep getting this error message "The iTunes Library file cannot be saved. An unknown error occurred (-50)" I'm not at all technical, so a simple response would be appreciated. I have already downlaoded the latest iTunes software and reinstalled it but the problem remains and I am unable to add additonal music to my library.

make sure the media folder in iTunes > Preferences > Advanced is not blank or out side of your c dirve

I've been getting this message all day long, WHY? "Oops! This link appears broken. DNS error occurred. Server cannot be found.

I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.

I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.

Oops... a server error occurred and your email was not saved.

after completion of mail content when try to send the message error shows as
"Oops... a server error occurred and your email was not saved."
This problems are being experienced very often since installation of Firefox version 5.0

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Error occurs while activating a 'Write Optimized' DSO.

I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSO

Hi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

Error occured while converting the file track #1 the required disk can't be found

I have old CDs, I have new CDs and I have a relatively new MacBook Pro (3 years old) running current software on 10.9.4 OSX Mavericks. My updates are good on my iTunes but it won't let me import ANY CDs that I OWN! Is this the new Apple and it's iTunes update?
Can we not legally put our CDs onto our phones or iPad/iPods any longer? Must I go garage sale-ing for a personal CD player? The code reads; "Error occured while converting the file track #1 the required disk can't be found". My cd drive is fine btw. It reads and shows on my desktop and will also play when I double click the CD icon and play the .aiff file.

I kind of have the suspicion if you were no longer allowed to put CDs on iPods it would be front page news, not something you alone would discover. Anyway, there would probably be a clear message to that effect rather than a technical error message. I would take the technical problem route first rather than suspect you have been targeted for persecution.
Have you restarted iTunes? Have you tried restarting your computer?
Personally I prefer third party rippers such as XLD and Max and you could certainly try one of those to at least isolate the issue to iTunes.

Error occurred while converting the file ".." An unknown error occurred -50

I've had a few tracks which seem to skip on my ipod but play perfectly fine on itunes.
As a result, I've been converting these tracks to ACC files; this has worked for a few files but for one particular album i get the following:
+error occurred while converting the file ".." An unknown error occurred -50+
I've tried renaming the files, I re-created my playlist but nothing works.
Thanks in advance.

*Skipping songs*
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
You may like to try scanning the files with MP3 Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/option clicking and using the option Convert id3 tags > None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g. convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2

An error occurred during olap API metadata retrieval. This is probably caus

this is what i have done so far. i really nead some help asap!!!
1. Install Oracle 9i Release 2 (9.2.0.1) Enterprise Edition with the General purpose database configuration (Data warehouse works as well). At the end of the installation I chose the password management button to change passwords for the few necessary accounts: SYS, SYSTEM, OLAPSYS, SH.
2. Download the p3948480_9206_WINNT.zip from metalink, the 9.2.0.6 patchset
3. Shut down any existing Oracle9i database instances with normal or immediate priority. Stop all listener and other services running in the Oracle home directory where you want to install the patch set.
4. unzip the content of thepatch to a temp directory
5. start setup.exe under the temp directory (it will start the Oracle Universal installer 10.1.0.3)
6. install the patchset to your Oracle home, selecting the source in the temp_dir\stage\products.jar file
7. review carefully the post-installation tasks for the patchset:
Review the following sections before upgrading a database (quote from the patchset html readme):
8.2.1.1If JServer is part of the installation ensure that there is at least 10 MB of free space allocated to the SYSTEM tablespace.
8.2.1.2 Check XDB Tablespace Size
For RAC installations, ensure that there is at least 50 MB of free space allocated to the XDB tablespace.
8.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters
Set the value of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters as follows:
Start the database:
SQL> STARTUP
If necessary, enter the following command to determine whether the system uses an initialization parameter file (initsid.ora) or a server parameter file (spfiledbname.ora):
SQL> SHOW PARAMETER PFILE;
This command displays the name and location of the server parameter file or the initialization parameter file.
Determine the current values of these parameters:
SQL> SHOW PARAMETER SHARED_POOL_SIZE
SQL> SHOW PARAMETER JAVA_POOL_SIZE
If the system is using a server parameter file:
If necessary, set the value of the SHARED_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET SHARED_POOL_SIZE='150M' SCOPE=spfile;
If necessary, set the value of the JAVA_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET JAVA_POOL_SIZE='150M' SCOPE=spfile;
If the system uses an initialization parameter file, if necessary, change the values of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters to at least 150 MB in the initialization parameter file (initsid.ora).
Shut down the database:
SQL> SHUTDOWN
8.2.2 Upgrade the Database
After you install the patch set, you must complete the following steps on every database associated with the upgraded Oracle home:
Log on as a member of the Administrators group to the computer where the Oracle components are installed.
Use SQL*Plus to login to the database as the SYS user with SYSDBA privileges:
sqlplus /NOLOG
CONNECT SYS/password AS SYSDBA
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
Restart the database:
SQL> SHUTDOWN
SQL> STARTUP
Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql
12. Install JDeveloper 9.0.4 (download it from OTN and just unzip it in a directory ... it doesn't require an oracle home)
13. Install BI Beans 9.0.4 (download it from OTN as well), run the setup.exe that comes with it and in the destination oracle home select the directory where you installed JDeveloper and give an oracle home name to it)
14. Install the BIBDEMO schema:
Create a directory on the computer that is running the Oracle9i database. This install_home directory is the location to which you will upload the data files that are required to build the BIBDEMO schema.
On the computer where BI Beans is installed, locate the bibeans_home\bibdemo_schema folder (where bibeans_home is the root folder of your BI Beans installation). Copy all of the files found in this folder to the install_home folder on your server machine.
Open a DOS prompt and navigate to the install_home folder.
Run bibdemo.bat to install the schema, using the following syntax:
bibdemo.bat <path to Oracle database files >
For example, for an instance named my9iService, enter the following:
bibdemo.bat D:\OraHome1\oradata\my9iService
You are prompted for the password for the sys as sysdba user.
The script takes approximately 15 minutes to run, depending on the machine specifications. It is normal to see some error messages while the script is running. In addition, when materialized views are being created in the database, the script will appear to stop; this is also normal. A clear message will tell you when the script has completed.
The log files (*.log) that are generated by the installation script are stored in the folder from which you ran the script.
Here's what
bi_checkconfig.bat -h ana -po 1521 -sid proiect -u bibdemo -p bibdemo -q
returned:
BI Beans Diagnostics(v1.0.2.0) 2/28/05
===============================================================================
JDEV_ORACLE_HOME .......................... = E:\OraDS
JAVA_HOME ................................. = E:\OraDS\jdk
JDeveloper version ........................ = 9.0.4.1.1.1436
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = E:\OraDS\jdev\lib\patches
Database version .......................... = 9.2.0.6.0
OLAP Catalog version ...................... = 9.2.0.1.0
OLAP AW Engine version .................... = 9.2.0.1.0
OLAP API Server version ................... = 9.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = 9.2
OLAP API JAR file location ................ = E:\OraDS\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 12
Number of metadata dimensions ............. = 8
Testing sample query for measures and dimensions
(S=Schema, C=Cube, M=Measure, D=Dimension)
1/21) Measure Budget ................... = Successful
S=BIBDEMO, C=BIBDEMO_BUDGET_CUBE, M=BUDGET
2/21) Measure Actual ................... = Successful
S=BIBDEMO, C=BIBDEMO_ACTUAL_CUBE, M=ACTUAL
3/21) Measure Close Price .............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_CLOSE
4/21) Measure Open Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_OPEN
5/21) Measure Low Price ................ = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_LOW
6/21) Measure High Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_HIGH
7/21) Measure Stock Volume ............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_VOLUME
8/21) Dimension Division ............... = Successful
S=BIBDEMO, D=DIVISION
9/21) Dimension Line Items ............. = Successful
S=BIBDEMO, D=LINE
10/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
11/21) Dimension Day .................... = Successful
S=BIBDEMO, D=DAY
12/21) Dimension Stock .................. = Successful
S=BIBDEMO, D=STOCK
13/21) Measure Costs .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.COSTS
14/21) Measure Promotion ................ = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.PROMO
15/21) Measure Quota .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.QUOTA
16/21) Measure Units .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.UNITS
17/21) Measure Sales .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.SALES
18/21) Dimension Channel ................ = Successful
S=BIBDEMO, D=CHANNEL
19/21) Dimension Geography .............. = Successful
S=BIBDEMO, D=GEOGRAPHY
20/21) Dimension Product ................ = Successful
S=BIBDEMO, D=PRODUCT
21/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
Metadata output location .................. = E:\OraDS\bibeans\bi_checkconfig\bi
_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Bu
siness Intelligence Beans Client Configuration" technical note, whose file name
is bi_checkconfig_tn.html
These diagnostics are captured in: E:\OraDS\bibeans\bi_checkconfig\bi_checkconfi
g.xml
now: i have created some new stuff:
1). user ana with roles:
-dba
-olap_dba
-connect
-resource
(same roles as bibdemo)
2).schema ana; tablespace ana (permanent), tablespace anatemp (temporary)
3).i have created some relational tables and i have inserted some data in them:
agent, aparat (cofee machines), beneficiar (clients), locatii (city), raport (REPORT), timp (time), tipaparat (types of cofee machines), tipbautura (products : types of cofee made by all the cofee machines), zone (state)
4). one fact table with:
- sold cantity (measure)
- id_bautura (id_product) primary key
- id_timp(id_time) primary key
- id_beneficiar (id_client) primary key
- id_agent primary key
- id_locatie (id_city) primary key
- id_aparat (id_cofee_machine)primary key
i have inserted some data also
5).dimensions:
AGENT_DIM :levels: codag(id_agent), numeag (agent name), telefag (agent phone number)from relational table agent
BENEFICIAR_DIM :levels: codben (id_client), denumire (client name), adresa (adress) ,codl (id_city) etc from relatinal table beneficiar (clients)
TIMP_DIM :levels: id, year, month from relational table timp (time)
TIPBAUTURA_DIM :levels: codbautura (id_product), numebautura (product name)from relational table tipbautura (products)
ZONA_DIM :levels: codzona (id state), numezona (state name), codoras (id city), numeoras (city name) with ierarhy id_state---id_city FROM 2 RELATINAL TABLES CITY AND STATE!!!!!!!! AM I ALOUD TO DO THAT?????
DO I NEED TO CREATE A DIMENSION FROM ONLY ONE TABLE???????
APARAT_DIM :LEVELS: codben (id client), codtip (id machine type), denumireap (machine type name), matricolap ((machine id) (FROM 2 RELATIONAL TABLES ALSO!!!!!!! FROM TYPES OF COFEE MACHINES AND COFEE MACHINES!!!!!
6). I HAVE NOW CREATED THE CUBE FROM THE FACT TABLE AND WITH ALL THE DIMENSIONS
7). summary advisor wizard NOT WORKING! IT NEVER STOPS!
8). I HAVE CREATED ALSO ONE materialized view FOR THE CUBE
IF I COMPILE IT... NO ERRORS
9). CUBE VIEWER NOT WORKING!!!!!!! IT ONLY APEARS A BELL!!!
NOW IF I RUN BI_CHECK CONFIG ON ANA AND ALSO ON BIBDEMO!!!!!!!!!!!!
IT SAYS:
1) An error occurred during olap API metadata retrieval. This is probably caused by inconsistent metadata.
============================================================================
oracle.express.ExpressServerExceptionError class: Unknown Error
Server error descriptions:
INI: System failure, Generic at TxsOqConnection::getDefaultDatabase
at oracle.express.olapi.data.full.ExpressDataProvider.getMetadataProviderInterface(ExpressDataProvider.java:1003)
at oracle.olapi.metadata.MetadataFetcher.initialize(MetadataFetcher.java:73)
at oracle.olapi.metadata.MetadataFetcher.<init>(MetadataFetcher.java:45)
at oracle.olapi.metadata.BaseMetadataProvider.<init>(BaseMetadataProvider.java:47)
at oracle.olapi.metadata.mdm.MdmMetadataProvider.<init>(MdmMetadataProvider.java:130)
at oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider(ExpressDataProvider.java:964)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider(MDMMetadataDriverImpl_92.java:1133)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(MDMMetadataDriverImpl_92.java:810)
at oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(MDMMetadataDriverImpl.java:125)
at oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel(MetadataManagerImpl.java:1092)
at oracle.dss.metadataManager.server.MetadataManagerImpl.attach(MetadataManagerImpl.java:969)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:876)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
I TRYED ALSO WITH USER ANA WITH ROLES:
- DBA
- CONNECT
-RESOURCE
- OLAP_USER
NOT WORKING! AND ALSO BIBDEMO NOT WORKING!
WHAT AM I MISSING? SHOULD I USE AW MANAGER? OR DO I NEED TO CREATE AN AMNALITIC WORKSPACE???
WHAT ARE THE STEPS TO CREATE A GOOD METADATA????

Hi,
The issue here is if the whole catalog is corrupt or just one schema. So to try and determine the status of the catalog I would try:
1) Using OEM remove all the objects you created
2) I presume you created your database using the Database Configuration Assistant? You should have used the warehouse template
3) Make sure the following accounts are unlocked and also not expired : SH, OLAPSYS
4) Make sure the password for the SH schema is SH
5) Make sure the password for the OLAPSYS account is manager
6) Install the BIBDEMO schema that is shipped with BI Beans. This in the jdev_home/bibeans/bibdemo_schema
The installation process will remove SH schema from the OLAP catalog.
7)Once this is installed use JDeveloper to see if you can create a crosstab or graph.
8) If the BIBDEMO schema works try creating your new schemas one at a time.
9) Make sure the if you define the a dimension as type time it has END_DATE (column type DATE) and TIME_SPAN (column type number) defined. Otherwise don't define the dimension as type time.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans

An internal error occurred while writing imported graphics in this document. The file has been saved

An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
How do i fix this, there are no images in the document
thanks
emma

We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

Error occurred while saving document in Web Analysis Studio

We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
Web Analysis version 11.1.2.3.000.1175
Please advise on how to handle this case

Hi Soumya,
Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks!

OOPS A TECHNICAL ERROR OCCURRED

Similar Messages

Maybe you are looking for