Oops with autofs [FIXED]

I was trying to get my usb external drive to automount so I installed and configured autofs according to the instructions on the wiki.
However, since autofs was configured to use /media and all my other devices were in /mnt, I configured autofs to use /mnt as well. Autofs wiped out all the directories in /mnt and inserted cdrom and usbstick directories. I uninstalled autofs and automounting is working fine now on my usbdisk ( I needed to add myself to the storage group and start hal and dbus ). However, my cdrom won't automount. If I mount it manually, I can view the contents in konquer by going to /mnt/cdrom but it won't show up under the media:/ (the storage media list).
In addition, I can't remove the /mnt/cdrom and /mnt/usbdisk directories. I'm not sure if that means anything.
[root@l33t1 mnt]# ls -al
total 4
drwxr-xr-x 4 root root 0 2007-04-28 10:29 .
drwxr-xr-x 19 root root 4096 2007-04-27 00:56 ..
drwxr-x--x 2 root root 0 2007-04-28 10:29 cdrom
drwxr-x--x 2 root root 0 2007-04-28 10:29 usbstick
[root@l33t1 mnt]# ls -R
cdrom usbstick
ls: cannot open directory ./cdrom: No such file or directory
ls: cannot open directory ./usbstick: No such file or directory
[root@l33t1 mnt]# rm -frv *
[root@l33t1 mnt]# ls
cdrom usbstick
[root@l33t1 mnt]# rm -frv cdrom/
[root@l33t1 mnt]# ls
cdrom usbstick
Here is my /etc/fstab file:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fd0 vfat user,noauto 0 0
/dev/sda1 swap swap defaults 0 0
/dev/sda2 / ext3 defaults 0 1
/dev/sda3 /home ext3 defaults 0 1
and my mtab file (when my cdrom is mounted):
/dev/sda2 / ext3 rw 0 0
none /proc proc rw 0 0
none /sys sysfs rw 0 0
none /proc/bus/usb usbfs rw 0 0
none /dev/pts devpts rw 0 0
none /dev/shm tmpfs rw 0 0
/dev/sda3 /home ext3 rw 0 0
automount(pid10235) /mnt autofs rw,fd=4,pgrp=10235,minproto=2,maxproto=4 0 0
/dev/sr0 /mnt/cdrom iso9660 ro,noexec,nosuid,nodev,unhide 0 0
Last edited by linuxlefty (2007-04-29 20:50:27)

After a couple of reboots, it seemed to fix itself (*yay*)

Similar Messages

  • How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

    How can I download itunes when I get the following errors  ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
    This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
    Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
    Any help greatly appreciated.
    billymac

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (If this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Does it have a feature that supports management with accounts, fixed IP, VLAN ?

    I'm not quite familiar with those advanced features if it does exist as the fact that i've been primarily using cheap and unknown AP products for years :D I'm planning on upgrading my APs for personal reasons. Could anyone tell me does it have a feature that likely supports management with accounts, fixed IP, VLAN? What is it called and which product could fit my needs?
    Thanks.

    My name Eric Moyers. I am an Engineer in the Small Business Support Center.
    Thank you for the question. Currently all of our Small Business Wireless Access Points support Management accounts, fixed ip's and vlans.
    Here is a link for some model comparisons.
    http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html
    http://www.cisco.com/c/en/us/products/wireless/small-business-100-series-wireless-access-points/models-listing.html
    http://www.cisco.com/c/en/us/products/wireless/small-business-300-series-wireless-access-points/models-comparison.html
    http://www.cisco.com/c/en/us/products/wireless/small-business-500-series-wireless-access-points/models-comparison.html
    If you have any other questions or some specific questions, I am most happy to answer them. You can repost here or if you mouse over my picture you will see my email and can email me directly.
    Eric Moyers
    .:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
    Please rate helpful Posts and Let others know when your Question has been answered.

  • Value of the variable FISCYEAR to compare it with a fix date

    Hi,
    I'm using a hierarchy in my query. But in some case I have to multipliy the value in one column depending wich year is shown. So I tried to use a formular variable. But it doesn't work. Has somebody an idea what to do?
    How can I extract the value of the variable FISCYEAR to compare it with a fix date?
    Problem:
    ........................|  Year 1 (2005)       |  Year 2 (2006)        |   Year 3 (2007)
    hierarchy row 1  | query result 11      | query result 12       | query result 13
    hierarchy row 2  | query result 21      | query result 22       | query result 23
    hierarchy row 3  | query result 31      | query result 32       | query result 33 => row is hidden
    formular row 4   | IF Year == 2005    | IF Year == 2005     | IF Year == 2005 
                             THEN                   | THEN                    | THEN                   
                            query result 31 *10 | query result 32 *10 | query result 33 *10
                            ELSE                     |ELSE                    | ELSE                   
                            query result 31       | query result 32       | query result 33

    The If Statement is no problem.
    I need the value of the variable FISCYEAR. So the value of the variable is the If-Statement. I tried to use a formula variable but don't get correct values. With BW 2004 I used the text and compared it with the string "2005". BW 2004s gives me the error message the if using the text, the value of the variable depends on the language which is not supported

  • APO proposed a Purchase Requisition with no Fixed Vendor

    After Quota Hueristic Run, the APO proposed a PR with No Fixed Vendor.  The Source List for the Material is properly maintained.  Please help.

    Should be a master data issue. can you try to create purchase req manually and see if it picks up the vendor ? this will atleast ensure that you have required master data setup.

  • Databse of 1888 Byte Per Record with 259 Fixed Fields Stumped CR?!?

    My Database of  15 million records/rows at 1888 Byte Per Record with 259 Fixed Fields STUMPED CR?!
    Executive Summary :
    I have lots of data. There are 15 million of records in some of my database files. But I need to drill into the data and get counts for each field.
    I need to know how many times each data field (row) is populated in a database file. For example,  how many of my records have last name? how many have first name? date of birth? etc.  I need a simple report made using SAP "Crystal Reports 2011" Workstation type edition that SUMS each data  row into a single column output like csv.
    My database sizes can range from 1,000 to 18 million records that are in fixed field asci format with 1888 bytes and 256 rows per record!  The report  needs to SUM each data field or, in the case of a data field with a minimum of twelve tables, SUM each value of a table.
    My contracted CR programmer is an expert although she was new to data files this humongous. Can anyone here help us get CR to work on my data? Here was her conclusion, Crystal Reports Fail:
    My file is 14.1 gb  as well. However, when run through Crystal Reports, it
    only returns 2,274,876 records. Therefore, I am going to assume that there
    is a Record Limit for Text files of this. I searched through all the
    registry settings and there is nothing that appears to be limiting it. I
    went online for a while to see if there was any information on it, and just
    like when I used to work there, there was nothing concrete. Business Objects
    does not physically test this large of data retrieval, therefore they don't
    know the exact record limits.
    I'm not sure what to suggest, but I don't think Crystal Reports is going to
    work for you and I wouldn't have known that from the beginning without
    testing your data. I'm 99% sure there is a refund policy on the software, so
    you shouldn't have any issues returning it.
    Since I only specialize in Crystal Reports, I'm not sure what other software
    can handle this amount of data. Possibly Cognos, but you may want to find
    out from them or do some research.
    If your data were in a database that can run stored procedures (like SQL
    Server or Oracle) then you could write SQL to only return the counts. Then
    when Crystal connected to the stored procedure, it should work, but I can't
    say for sure without testing it. And I don't have SQL Server or Oracle
    installed on my machine. I believe MYSQL (the free version) has a limit to
    the number of records it can hold and I'm sure 8 million would be over the
    limit. Also, I'm not sure if it supports stored procedures. I have used it
    once before and found it extremely cumbersome and limited. I think SQL
    Server and Oracle are quite pricey, so I don't think that this will even be
    an option for you.

    Hi Shawn,
    I actually contacted the same person you did also. Summer was a Report Designer Resource here and knows her stuff and the Report Designer as much as our Developer who wrote it do.
    As I suggested in my first reply is to get all that data into a real database, one that can run Stored Procedures to do all the crunching unfortunately is the only way I can see this ever working.
    Windows 7 and 8 CPU's doesn't help, 64 bit may but the problem is CR Designer is a 32 bit application so it can't take advantage of the 64 bit memory addressing space.
    What you could so is post your question to the forum:
    [Business Decision Making with BI|Marketing Library;
    This is a forum for managers or anyone who wants to have a non-technical discussion about making informed decisions with analytics tools. Ask questions and share your experiences on how to effectively utilize data to address real business problems. Experts from inside and outside SAP will be monitoring these conversations and offering their knowledge along with the broader community.
    Someone in there may have another SAP product that might be able to load your flat file into a data tool that CR can report off of.
    I still think a copy of MS SQL 2008 Express is your best and likely cheapest solution and then you can simply import the data into it which it has an Import Wizard that makes it relatively easy to do... Although you may have to break your file into pieces for it to be able to process also.
    You need to be flexible on that data source, I doubt you'll find anything that can report off of that huge of text file.
    Good luck
    Don

  • Help with smart fix please!

    I was putting a video in my time line and adobe said there were some thing wrong with my clip and would i like to change it with smart fix. i said yes adn dont show me message again.... needless to say my clip was eddited so much that i want to see that message again or i need a way to trun off smart fix. please need some help cant find an answer anywhere!

    No need to bump 45 minutes after you post, Luke. We don't sit 24/7 on this forum, so please be patient and someone will eventually address your question. (In fact, all of these questions are addressed in my book http://Muvipix.com/pe10.php if you're interested in a ready reference.)
    Under Edit/Preferences, you can re-activate any messages, including Smart Fix, that you previously told the program not to show any more on the General page. Just check the option to Show All Do Not Show Again Messages.
    And, yes, a clip must have been Auto Analyzed prior to your adding it to your timeline or you will not see the Smart Fix option panel.

  • I how problems with delete/ fix alias

    I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

    Moved to InDesign forum.
    You can start by telling us what the problem is.

  • Convert decimal to binary with a fixed length

    Hi, I need to write a program that converts a decimal number to binary with a fixed length (say 5), for example, decimal digit "0" -> binary number "00000". I try Integer.toBinaryString(), but it will just cut off the leading bits, so I wonder how to let the conversion happen, anyone can help me with that, thanks in advance.
    mckie

    Daiyue_Weng wrote:
    Hi, I need to write a program that converts a decimal number to binary with a fixed length (say 5), for example, decimal digit "0" -> binary number "00000". I try Integer.toBinaryString(), but it will just cut off the leading bits, so I wonder how to let the conversion happen, anyone can help me with that, thanks in advance.
    mckieWhat do you expect it to do? When you limit yourself to 5 digits binary you can only represent 0 to 63 and you will loose anything not in those 5 digits.

  • IPad 2 is getting very slow after installing iOS8. Is Apple comming with a fix for it?

    iOS8 is making ipad2 extremely slow. I can't work with it anymore. When is Apple comming with a fix?

    Now, you can downgrade your iPad from iOS 8 to iOS 7, BUT do it quickly. A few days later, the way is not available any longer:
    1. Download iOS 7.1.2 firmware for your iPad 2. (just google it)
    2. Make sure you have install the latest version of iTunes.
    2. Connect your iPad to computer via a USB cable.
    3. After detected, your iPad will be shown in the left column. Click your iPad to show the control panel.
    Note: Make sure you have backups of your iPad. if not, backup it now.
    4. Under Summary tab, hold on Shift key in Windows(Option key in Mac ) click Restore iPhone....
    5. In the pop-up window, find the firmware on your computer and click Open.
    6. Then, iTunes will downgrade your iPad to iOS 7.1.2.

  • Will apple ever come out with a fix to retrieve the restrictions password

    Will apple ever come out with a fix to find out your restrictions password?

    Alfred DeRose wrote:
    1Password is still my favorite password (and more!) manager.
    This question is asked so often, I'm convinced many are kids trying to get around the restrictions their parents have set. :-)
    Wouldn't suprise me

  • When will apple release an update with bug fixes for ios 6?

    when will apple release an update with bug fixes for ios 6?

    When indeed. I purchased iPhone 5 64gb and have so far experienced the following issues/Bugs
    1. Flash on camera out of sync
    2. Cannot connect to some WIFI Bluetooth drvices
    3. Missing Album Artwork on iTunes album view
    4. Buggy and confused maps/satnav
    5. iMessage comes and goes
    6. Battery Life *****

  • Script after unmount with autofs

    I have a small embedded home server running arch linux, now it should manage many (~10) external hd's. i mount them with autofs and share the /mnt folder with samba and nfs. after 10 minutes inactivity, i unmount each hard drive. is it possible to start a script when a hard drive unmounts, and to start another script when autofs mounts it again? the script talks to the serial port and a microcontroller turns off each hard drive.

    The AE scripting host only works with AE running. It doesn't even work with just hooking up to ESTK. You realyl need to run the AE process one way or another. Of course scripts can be invoked by triggering teh respective menu commands or providing them as commandline parameters then, but that very much is the long and short of it. Generally one would rather run a plug-in or script panel from within AE and connect to the external processes...
    Mylenium

  • RV320 Connecting With Multiple fixed IP's

    Hope someone can help me with this be warned I'm no expert.
    We have 2 BT business broadband lines, 1 with a single fixed address and 1
    with multiple fixed addresses both connected using Draytek Vigor 120's.
    The line with the single fixed address works fine using PPPOE login from the RV320 as BT auto allocate the fixed IP.
    What I can't work out is how to login to the line with the multiple IP's and set the Fixed IP as It doesn't seem to be auto allocated.
    If I login using PPPOE I just get a dynamic allocated address.
    If I set the connection as fixed IP there's no login options so doesn't connect.
    I will soon need to use some of the fixed IPs so any help please.
    regards Mark

    I have a connection similar to your PPPoE with multiple fixed addresses and it works fine on a RV320.  When I setup the WAN port to connect, the ISP assigns a specific fixed address to the WAN to route all the other IPs through.  It would almost have to be that way since the WAN port is typically not on the same subnet as the addresses that are routed.  Even if the RV320 does see them as on the same subnet it will work either way.
    I would start by resetting the 320 to factory default and run through the wizard.  The main thing is to enter the PPPoE info in the WAN settings and the 320 should dial in and connect to your ISP.  Then in order to use the fixed IPs, I would use One-to-One NAT to map each public IP to the corresponding private IP.  The internet sees those machines as physically having the public address but they can be protected by the firewall access rules.
    I have done this on several Cisco routers, including the RV320, and it worked fine.  IF you are wanting to assign the public addresses to the machines by hard coding them with the address, that is another matter.  The 320 will do that as well but it is a little trickier.

  • Umount drives mounted with autofs

    Is it possible to allow users to call "umount" on drives that were mounted with autofs?  I have the following rules:
    cdrom -fstype=iso9660,ro,users,nodev,nosuid :/dev/cdrom
    floppy -fstype=auto,async,users,nodev,nosuid,umask=000 :/dev/fl
    usb -fstype=auto,async,users,nodev,nosuid,umask=000 :/dev/sdb1
    I am under the impression that if I mount with option "users", then users can umount the drives.  However, that option does not actually seem to be used.  Any ideas on how I can allow my users to umount these drives?

    Nope.  From `man mount':
    users:  Allow  every user to mount and unmount the file system.  This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line users,exec,dev,suid).
    Only the user that mounted a filesystem can unmount it again.  If any user should be able to unmount, then use users instead of user in the fstab line.  The owner option is similar to the user option, with the restriction that the user must be the owner of the  special  file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device.  The group option is similar, with the restriction that the user must be member of the group of the special file.

Maybe you are looking for

  • AGO function in OBIEE

    Hi, I am creating a new logical column on my fact table and would like to use time series function(AGO) to compare trends a month ago. I have a time dimension too. I am using this expression defined in the new logical column properties: Ago("HCBF"."W

  • How to print same layout twice changing only one field dynamically

    I have a report which prints three pages invoice in Dollar currency, I want that same report to print those three pages again but the currency will be changed dynamically based on certain criteria. It means I three pages for Dollar and next three pag

  • How to limit the number of items from RSS using XSLT

    Hello, I am using plsql to read contents from RSS, basically a simple RSS reader. I would like to somehow want the feature to restrict the number of items in the RSS feed, say I would like to display only the first 5 items. How could I achieve this?

  • 5.0.2 dot release available for InDesign Server

    The 5.0.2 Dot Release for InDesign, InCopy and InDesign Server is now live on Adobe.com and available through Help>Updates. This update provides key fixes in the areas of Anchored Objects, Character Alignment, Step and Repeat, Indexing and Table of C

  • Convert Video Selection for iPod

    When i click that and i am trying to convert a video from .mpg the sound doesn't stay with the file is there any way to fix that