Open Browser with sound file

I want to open a sound file from my index page that will
describe my sight and play while users explore the site. I have
tried to use behaviors which will open an HTML page but not an MP3
file - cant see why not. The other opens which were to make a link
to the file from index means that once the user switches to another
page the sound file gets lost.
Any help please
Robano

Most people here will tell you that's a horrible idea. To
understand why
start here:
http://groups.google.com/groups?as_q=autoplay+music&num=10&scoring=r&as_epq=&as_oq=&as_eq= &as_ugroup=macromedia.dreamweaver&as_usubject=&as_uauthors=&lr=&as_drrb=q&as_qdr=&as_mind= 1&as_minm=1&as_miny=1981&as_maxd=12&as_maxm=9&as_maxy=2008&safe=off
Walt
"Robano Resources" <[email protected]> wrote
in message
news:gae7rv$5dn$[email protected]..
>I want to open a sound file from my index page that will
describe my sight
>and
> play while users explore the site. I have tried to use
behaviors which
> will
> open an HTML page but not an MP3 file - cant see why
not. The other
> opens
> which were to make a link to the file from index means
that once the user
> switches to another page the sound file gets lost.
>
> Any help please
> Robano
>

Similar Messages

HT2506 Hello I'm unable to open any pdf's with preview window opens up with message file couldn't be opened because you don't have permission to view it (none of the pdf's have any security thanks if you can assist

Hello this week I'm unable to open any pdf's with preview, when I select to open a window opens up with message "file couldn't be opened because you don't have permission to view it" none of the pdf's have any security thanks if you can assist

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Word 2010 to PDF hyperlink opens browser for local file...

Recently upgraded to Office 2010. I used the Save As .pdf option in Word 2010 for a file that contains a hyperlink to a local pdf file. When I open the saved pdf file with Acrobat Reader and click on the link, my default browser starts up to display the local file. I have tried using different versions of Acrobat Reader, different operating systems, and all kinds of options, but can't figure out why this is happening. I think it's a bug in Word 2010, but can't find any information about this on the web.
Does anyone have any clues?

OK, replying to my own post, I did just find a Workaround
that's only a few extra steps.....
After all edits and changes were completed in the Word file, I printed to PDF from Word,
creating a Rev A file. Once that was done and a new pdf was created, I opened the
Original File and selected "Combine" from the "File" pull down menu.
With both of the files in the same PDF document, I deleted all the pages from the
Original file. Page one of the Rev A file is now p. 1 of the "combined" file,
and all the PDF bookmarks (still there from the Original File) line up in the right
sequence. The bookmarks (produced by "Saving to PDF" with Headings 1 and 2,
when the original PDF was made) need to be re-linked to the pages in the Rev A
file, but that's quicker than starting from scratch.
Not really very elegant, but it worked. I'd be curious to know what's wrong with the
PDF files saved with bookmarks in WORD, because that happens EVERY time.
I have Acrobat Pro Extended, iteration 9.5.1

Memory leak in AudioServicesCreateSystemSoundID with sound files

hi !
Instruments indicates a 64Ko memory leak in "AudioServicesCreateSystemSoundID" when I use a sound that I have created with GBand / iTunes. When I use the sound file "tap.aif" from the "sysSound" sample, there is no memory leak.
What's wrong with my audio file ?
It's a AIFF file, 95Ko, 8 bit mono 22Khz @ 176kbps.
thanks...

appFile = [ [ NSBundle mainBundle ] pathForResource : _filename ofType : _extension ];
FileUrl = [ NSURL fileURLWithPath: appFile ];
if ( AudioServicesCreateSystemSoundID( ( CFURLRef ) FileUrl, &soundID ) != kAudioServicesNoError )
return false;
I don't think the code is wrong because when I change the name of the sound in '_filename', there is no leak.
I haven't found in the documentation the audio file properties ( 8/16 bits, ... ) supported by 'AudioServicesCreateSystemSoundID'.
The code is for iPhone.

Archiving object in open hub with logical file name

Hello,
I am trying to use an open hub with a logical file name.
By the SAP help looks like you have to use/define a archiving object:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
Steps 1 and 2 of "Defining Logical Path and File Names" are done and tested:
       1.      Definition of the logical path name
       2.      Definition of the logical file name
       3.      Assignment of the logical fine name for the archiving object
But is it not clear to me if an archiving object is suppose to be used, which one then?, or if you have to create a new archiving object, with which characteristics?
Any help welcome,
Alberto.

Alberto,
Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

Photoshop Elements 6 won't open RAW with XMP file.

Hi,
I searched for an answer but, could not find an answer.
I edited a RAW file with Photoshop Elements 6 (mac). I saved the file and closed the program. Next day I fire up PSE6 and open the same RAW file; the file is unedited. How can I open the RAW file with the edits I made the day before? I see the xmp file in finder.
I'm still on the trial version. Camera is a Canon 50D. I can open and edit the RAW with out problem. When I start PSE6 Adobe update fails and gives me the options: Ignore,Relaunch,Send report to Apple.
After that PSE opens for me
Help me Obi Wan Kenobi; you're my only hope.
Thanks.

Are you hitting the save button? That is creating a DNG file someplace. If you just want to save your edits, that should happen automatically when you click Open or Done. If it doesn't, try going to your username>preferences folder and deleting the Adobe Camera Raw preferences.

Open Browser with No Address Bar from Java

How to open a IE Browser from Java with no address bar, tool bar etc ?
I am able to open browser like the listed code, but the requirement for me is it has to open with no "Address Bar", buttons.
I know we can do that in "Javascript" but how to or is there a way to do that in java/swing.
Any help is greatly appreciated.
String WIN_FLAG = "url.dll,FileProtocolHandler";
String WIN_PATH = "rundll32";
String url = "www.google.com"
String cmd = WIN_PATH + " " + WIN_FLAG + " " + url;
Runtime.getRuntime().exec( cmd );

Use javascript for this. I would do it this way....
You can decide with JS if you want tot hide so elements from your browser. Should not be very difficult to implement

Is there an ant task on FlexUnit to open browser with swf embedded?

Here is the same (unanswered) question asked by someone else: http://forums.adobe.com/thread/740495?tstart=0#740495
Basically I need to open my flex app in a browser window from ant, and the FlexUnit task apparently does not support this.
I have downloaded a sample from FlexMonkey. When they (sample writers) execute flexunit in this sample, one of the arguments to FU is "url". However, I can find no evidence of this version of FU (that uses that "url" argument) existing anywhere. Using the swf argument doesn't work as documented in the previous question above. So I don't know if my problem is Flex version, or it's just not supported by FlexUnit.
I'm using the Flex sdk 3.2.0 and the FU libraries below:
flexunit-4.1.0-33-as3_3.5.0.12683.swc
flexunit-4.1.0-33-flex_3.5.0.12683.swc
flexunit-cilistener-4.1.0-33-3.5.0.12683.swc
flexunit-uilistener-4.1.0-33-3.5.0.12683.swc
flexUnitTasks-4.1.0-33.jar
Please tell me if this issue has been solved and if so what libraries I need to implement it. If it is done for Flex 4.x, but not for Flex 3.2, perhaps you could guide me to the java source for the ant task for Flex 4.x so that I can implement this for Flex 3.2 or Flex 3.x.
thanks,
Phil

@Linden - Have not heard of this side effect from anyone as of yet, but good to know. Sounds like the file lock is coming from the Flash Player and causing the spawning process (rundll32.exe) to hang around as well. The FlexUnit team runs on Hudson using the FlexUnit Ant task, but we don't seem to encounter the same issue. What's the longest interval you've tried to use with the sleep task? Does the FP ever release its handle to the test SWF on your development machines?
Not sure this is a problem with the FlexUnit Ant task, but in 4.2 we could try to explicitly kill the rundll32 process since we'll have the PID when the task launches it. Head on over to JIRA and file a feature request for us and I'll see what I can do in the new year. In the short term though, maybe try upgrading your version of the stand alone debug flash player to see if that helps. Has anyone else seen this issue? Could you possible just move the clean target to be called before the xci-test target is run? Just some suggestions.
-Brian

Bridge slow to open folders with many files

Running Bridge CS3 on XP with 2GB of RAM, if I attempt to open a folder with, say, 80 or more RAW files, each about 6-7 MB, Bridge takes 20 minutes or more, or maybe even locks up. But if I split the folder into two subfolders, each with no more than 40 files, Bridge opens them up one at a time relatively quickly. Have others experienced this, and is it simply a limitation of Bridge or do I need more memory or processing power?

Hi Michael.
That depends on when you are referring to. When you import files into Bridge the program first sorts the files into the order specified in the 'Filter' panel. Next it creates the image thumbnails - this can take a considerable time if you have 'High Quality Thumbnails' ticked in Bridge Preferences, as Bridge then has to create it's own colour managed thumbnails rather than use the ones embedded in the imported files. The time to create the high quality thumbnails is also increased when indexing RAW images, as they contain more data.
Once the initial indexing and creation of thumbnails is complete for the folder then subsequent openings of the folder should be much faster.
If you have a folder containing several hundreds of images this initial indexing can be a pain, so I usually go off and do something else.
BTW, if you interrupt Bridge while it's going through this initial indexing of a folder then it will attempt to resume next time the folder is accessed, so it's better to let it finish and get it over with - you can tell where Bridge has got to by the '%' indicator at the bottom left of Bridge.
Ian.

Open dataset with Chinese file name does not work

HI Guru,
I have an issue now, when I try to open dataset '/test/file.txt' it works, but when I tried to open a file name contains Chinese file name like open dataset '/test/文件.txt' , it failed again and again, no matter in text mode or legacy text mode or binary mode also I tried encodings. I need to read/write files to application server. the backend OS is HP Unix 11.
thank you in advance.

Moving this thread from WDA to ABAP General becuase it has nothing to do with WDA. Please in the future pick your forum appropriately.

Explorer.exe crashing when opening directory with FLV files in them

Hi,
In the past few days for no reason at all, every time I open
a folder containing FLV files, I get an error with Explorer.exe
crashing. I don't even touch a file, just opening the folder
containing them causes it.
Has anyone else experienced this issue. It getting a bit
annoying now.
All of my FLV files are created with Premier Pro CS3, and
until recently I haven't seen any issues.
Even if I use Remote Desktop into my Windows 2003 Web Server
to view the folder on Flash Media Server, my local computer drops
Explorer.exe.
cheers

it's probably because you have .flv registered as a video
file, and the explorer tries to create a video-thumbnail. (have you
installed any funky FLV video players/ or maybe a codec pack?)
If you can, try navigate to the folder in "details" view
mode..that should be fine, because details view, does not show
thumbnails.
Then try to click on one of the FLV files.. you'll see the
preview pane..and eplorer will crash.
i'm not sure how to fix this, but somehow, you should remove
.flv from the filetypes that windows conciders a video file.

Making a basic Video starting with sound files only

I'm totally new to Premiere and find it quite dauting. Basic tutorials don't really seem to be helping as they presume you start with a working video.
What I have is several 30-60 second .wav files which I need to be in sequence most of them also have associated GIF images to go with them.
I'd like to create a video which just plays the wav files and the the associated GIFs in sequence?
How do I go about doing this? Help much appreciated.

Before you add any Assets to a Video Track, it will be black, as there is nothing to show. However, that "empty" Video Track can be problematic with many Export options.
Instead, I would Import the Audio files, and drag each to the Timeline, where you want them. Note: a 1-channel (Mono) Clip will ONLY go on a 1-channel Audio Track, but if you do not have one, and need one, just drag that 1-channel Clip to the Master Audio Track. It will not go there, but PrPro will create the necessary 1-channel Audio Track, and put the Clip onto it. Same for 2-channel (Stereo).
When you have your Audio Tracks in place, go to the New icon at the bottom of your Project Panel, and click on that. From the drop-down, choose Black Video. When created, just drag that to say Video Track 1. It will probably be only 05 sec. long (the default), but just click+drag on the Tail of that Black Video Clip, to drag its Duration to match the Duration of the entire Audio Track(s).
Then, Import the graphic Images. Drag each to say Video Track 2, above that Black Video. Adjust each Image's Duration, as needed. If required, you can adjust the Fixed Effects>Motion>Scale, and Motion>Position, if needed. You can also Keyframe those Fixed Effects, if you wish to animate them over time, i.e. Pan, and/or Zoom.
Done.
Good luck,
Hunt

When client open folder with html files to preview web site, some pictures are missing when previewed.

However all images are in "images"folder. Same images are missing when previewed in Firefox and Explorer.
Any idea why?
Thanks.

Are you sending this other person all of the image files in
the same relative location as they are on your local computer?
For instance, if you are sending them index.html and your
images are in a folder called images, you should be sending them a
Zip file with the following enclosed:
index.html
images (folder)
image1.gif
image2.jpeg
If you are sending this type of structure to your other
party, check the links in code view. Make sure they are relative.
If they are, on the index.html page they would look like
images/image1.gif. If it says anything like C:/ or something that
points to a local drive they you will need to make sure the image
are within the site definition and then save the files
again.

Opening Browser with URL from Forms

Hi,
We can open internet browser by using HOST command in FORMS. How to open specific URL into the browser through FORMS.

Hi,
The following Host built-in takes you to the specified site,
Host('Netscape http://www.oracle.com');
Best Regards,
Deepak Rai
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rama Ala ([email protected]):
Hi,
We can open internet browser by using HOST command in FORMS. How to open specific URL into the browser through FORMS.<HR></BLOCKQUOTE>
null

Opening folder with video files flickers window

When I double click on the folder that has the video footage files the window of that folder start flickering for 3-5 seconds. If I open the second time the same folder, then its OK. It always happens to the new folder that was not open recently. First time it happened few months ago and Apple support told me to delete all preference files. I did and it stopped doing it up until now.
Did anyone have the same and is there another solution then deleting preference files all the time. Maybe its a memory issues?
Thanks,

FAQ: What information should I provide when asking a question on this forum?

Open Browser with sound file

Similar Messages

Maybe you are looking for