Open Database In Parallel Mode

I have been configured two data guard in same server when try to open standby database in mount status .It showing ORA-01102 error.Please guiide me how to achieve primary database and standby database in same server.Which precaution to take care.

OK
There's your problem.
Unsupported OS and version of Oracle in desupport.
You have a couple of options.
1. Run Oracle on a server OS using VMware or alike. You can run Oracle 11 on as little as 1.2GB of RMAN per virtual server and set different IP and such. It makes for a flexible, and cheap test area.
2. Just use a Server OS period.
Windows Ultimate is a workstation OS. Oracle and Data Guard need a server environment. Please consider this change.
I have my own techy rule regarding things like this. "Just because you can, does not mean you should".
Supporting Documents
Is Microsoft Windows 7 certified to install/run Oracle Database Server/Client ? [ID 952302.1]
Master Note For Database and Client Certification [ID 1298096.1]
Best Regards
mseberg

Similar Messages

Unable to open database in READ ONLY mode

When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
1) Startup mount
2) SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
ERROR at line 1:
ORA-16005: database requires recovery
But database opens succesfully when opened in READ WRITE mode.

user12038051 wrote:
When trying to open database in READ ONLY MODE it says needs recovery. How ever database opens succesfully in READ WRITE MODE.
1) Startup mount
2) SQL> ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE OPEN READ ONLY
ERROR at line 1:
ORA-16005: database requires recovery
But database opens succesfully when opened in READ WRITE mode.
sqlplus '/as sysdba'
shutdown imediate;
startup;
shutdown imediate;
startup mount;
recover database;
alter database open read only;

Database Open in Read Only Mode

Hi
I would like to open database in read only mode
like
SQL> startup mount
SQL> ALTER DATABASE OPEN READ ONLY
this will open database for read only mode for all user
i want to give read write access on database to one user
any idea how i can proccess
Thanks
Chetan

Hi,
Alter database open read only;
this should work fine and everything will be in read only mode. Hence if any auditing is going on and audit_trial=db then it fails to open the database in read only mode.
If you want to control only users to stop writing to it, you may remove tablespace quotas for those users. Also, you may control them through grants. Remove any current grants assigned to them or to roles through which the grants are assigned.
Several ways to do this. If you tell us the particular scenario then we might help in getting a solution.
Regards,
Vasu.

Generating EXPLAIN PLAN on a database which is opened in READ-ONLY mode

Hi,
I am using Oracle 10.2.0.3 version.
If my database is opened in READ-ONLY mode, means no insert/update/delete operations are permitted here.
While generating EXPLAIN PLAN for any SQL, it does entries in PLAN_TABLE. But my database is opened in READ-ONLY mode, means no inserts can happen.
So how can I generate EXPLAIN PLAN for my SQL in this condition?
Thanks in advance.
Best Regards,
oratest

oratest wrote:
I am using Oracle 10.2.0.3 version.
If my database is opened in READ-ONLY mode, means no insert/update/delete operations are permitted here.
While generating EXPLAIN PLAN for any SQL, it does entries in PLAN_TABLE. But my database is opened in READ-ONLY mode, means no inserts can happen.
So how can I generate EXPLAIN PLAN for my SQL in this condition?
You can always do: "explain plan into some_table@remote_database" to avoid inserting into the local database. Unfortunately 10g added a sequence fetch to the "explain plan" code, and this is where the call would fail if you tried this remote approach on your version.
Here's an idea I haven't tested. If you set up a database link from your production database to the read-only database, you could then do an "explain plan" in the production database for the SQL statement by changing every object reference in the SQL statement to "object@readonlydatabase". In most cases this will allow the optimizer to recognise the statement as "fully remote" and get the optimizer on the readonly database to create the execution plan - which would then be written to the production database.
Regards
Jonathan Lewis

Query faild against database that is opened in read only mode

ORA-16000: database open for read-only access
Hi ,
I am quering against a database that been opened in read only mode (10g version)
SQL> select controlfile_type,open_mode,database_role from v$database;
CONTROLFILE_TYPE OPEN_MODE DATABASE_ROLE
STANDBY READ ONLY PHYSICAL STANDBY
Currently when selecting against this database
i am getting the following error:
SELECT PS_RF_PROVGRP_VW.SETID, PS_RF_PROVGRP_VW.PROVIDER_GRP_ID, PS_RF_PROVGRP_VW.NAME1,
PS_RF_PROVGRP_VW.STATUS, PS_RF_PROVGRP_VW.SYNCID, PS_RF_PROVGRP_VW.SYNCDTTM
FROM PS_RF_PROVGRP_VW
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
The owner of the object is PSSYS and i am running the queries as user INFORMIX.
select owner,object_name,object_type from dba_objects where object_name ='PS_RF_PROVGRP_VW';
OWNER OBJECT_NAME OBJECT_TYPE
INFORMIX PS_RF_PROVGRP_VW SYNONYM
PSSYS PS_RF_PROVGRP_VW VIEW
User informix have "SELECT ANY TABLE" privilage
In the source database (e.g: not the cloning one) the queries results are returning susseccfully ,
and only in the clonning the database the problem exists.
Does someone have an idea what the problem could be ?
Thanks.

Hi
Object can become invalid, if the underlying objects are dropped/invalidated.
So even if you create or validate the underlying objects these objects by themself do not become valid. You have to either make them valid or you should use it atleast one time as select/desc or any other query so that Oracle implicitly make it valid.
Your source datatabase has valid synonym because after dropping/creating you must have selected that synonym atleast one, but this selection procedure would be after you copied your data to the target database.
Regards

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to set the database in NOARCHIVELOG mode

hellow world,
I knewly joined this organization.
Our database is very small < 4GB data.
Database is running in ARCHIVELOG MODE.
since we are not keeping any physical backup, so I opted to run the datbase in NOARCHIVELOG mode.
For bringing the database in NOARCHIVE MODE, I simply changed the init.ora parameter LOG_ARCHIVE_START = FALSE and restart the database.
offcourse the archiving stopped, but to my strange after 30 to 40 minutes my all log files filled an error message is being displayed to the server, saying
log files are filled, waiting for the archiving, Oh my God, What has happened, All users came to my head, DATABASE HANGED, NOT RESPONSING.
SIR, MY QUESTION IS
WHAT FOR ALL LOG FILES WAITING?
when i am saying NOARCHIEVE than
please explain me, where i committed mistake. I am new to ADMINISTRATION.

1. Not keeping any physical backup is all the more reason to stay in archivelog mode.
2. You need to shutdown the database, startup mount, and issue 'alter database noarchivelog', the alter database open.

Problem running oracle 9i database in archivelog mode - database freezes

Greetings,
I recently needed to change a (test) database to archivelog mode to make online back-ups of this database. This posed no real problem although I seem to be unable to set the database to automatic archiving eventhough I edited the init.ora file (translation of the "archive log list" output between square brackets):
SQL> archive log list
Databaselogmodus Archiveermodus [Databaselogmode: Archivemode]
Automatisch archiveren Gedeactiveerd [Automatic archiving: Deactivated]
Archiveerbestemming O:\oracle\ora92\RDBMS [Archivedestionation: O:\oracle\ora92\RDBMS]
Oudste on-line logreeks 12306
Volgende logreeks voor archivering 12306
Huidige logreeks 12308
I added this to my init.ora file:
# Archvie Log Destinations
log_archive_start=TRUE
log_archive_dest_1=%ORACLE_HOME%\database\archive
log_archive_format="%%ORACLE_SID%%t_%s.arc"
However, this is not the real problem (maybe it has something to do with it, which is why I mention it aswell), the real problem is that my database freezes when the archive log file is "full". When the archive file reaches ~102.400Kb it just freezes up and I need to restart the database.
The following error is written to the alert_sid.log file:
Thu Apr 17 09:19:55 2008
Thread 1 cannot allocate new log, sequence 12309
All online logs needed archiving
Current log# 2 seq# 12308 mem# 0: O:\ORACLE\ORADATA\O\REDO02.LOG
The problem seems to be that the oracle service can't start a new logfile when the previous one is full. Does anybody know how I could fix this?
Thanks in advance,
Bram

Hello Maran, thanks for your quick response.
I added the output of archivelog list in the original post, but it's in dutch so here's the (loose) translation of the output:
SQL> archive log list
Databaselog mode Archive mode
Automatic archiving Deactivated
Archive destionation O:\oracle\ora92\RDBMS
Oldest on-line logsequence 12307
Next logsequence for archiving 12307
Current logsequence 12309
Maybe something that can help with the troubleshooting:
The archivelog file is written to O:\oracle\ora92\RDBMS but only AFTER the reboot, I've checked SYSTEM rights to the folder and it has full control.
Babu, thanks aswell for your quick response.
The location exists and space is available but the database doesn't seem to load (that part of) the ora.init file because the output of archive log list still refers to %ORACLE_HOME%\rdbms instead of %ORACLE_HOME%\database\archive.
I've now executed alter system archive log all; and am executing the import where the database usually freezes to see if it still happens. So far I already had this written to the alert_sid.log file after executing the command:
Completed: alter database open
Thu Apr 17 10:00:11 2008
ARCH: Evaluating archive log 1 thread 1 sequence 12307
ARCH: Beginning to archive log 1 thread 1 sequence 12307
Creating archive destination LOG_ARCHIVE_DEST_1: 'O:\ORACLE\ORA92\RDBMS\ARC12307.001'
ARCH: Completed archiving log 1 thread 1 sequence 12307
ARCH: Evaluating archive log 2 thread 1 sequence 12308
ARCH: Beginning to archive log 2 thread 1 sequence 12308
Creating archive destination LOG_ARCHIVE_DEST_1: 'O:\ORACLE\ORA92\RDBMS\ARC12308.001'
ARCH: Completed archiving log 2 thread 1 sequence 12308
And new log files were written to the directory (O:\oracle\ora92\RDBMS) and this time I didn't have to reboot for it to happen. Both were 100mb files without the database actually doing all that much though.
Message was edited by:
user616266

ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode

Hi All,
Need help from the gurus.
Currently we are in state unable to do anything.
Was using a database and all of a sudden it crashed. Tried to mount the database, open it, it failed. Also tried the recover and alter database open, even that failed. Errors are as follows.
Errors in file e:\oracle\product\10.2.0 \admin\devrevdb\bdump\devrevdb_p000_2620.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-00449: background process 'DBW0' unexpectedly terminated with error 1242
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
In my spfile, the administrator has set only two control files and there is no mirroring and hence do not have another control file that will help me boot the db.
Please let me know how I should go about it. I am only a timebeing person trying to carryout a db activity. Any help would be of great help.

Hemant,
thanks for the reply.
I tried the way you suggested and it threw an error.
ORA-01145: offline immediate disallowed unless media recovery enabled
I searched and found that an additional tag of drop needs to be added to the command which you suggested.
ALTER DATABASE DATAFILE '<filename>' OFFLINE DROP.
i don't know what will the drop command have an effect ?
i have copied the data file to another location. Since i don't know much, i just want to be sure of what im doing.
if the above command is successfull, will it drop the datafile or the tablespace and i can no more use it. How can i use the copied datafile.
Thanks,
Sachin
I

Error message in Command line (cannot mount database in EXCLUSIVE mode)

Hello Experts
I'm new in Oracle and trying to connect to my database though SQL command line. After I login as SYS I user I get the message that 'connected to idle instance'. Then I use “STARTUP” to connect to database. Now from my understanding it should mount the database and open it as well. But it does'nt happens.Instead I get the message 'cannot mount database in EXCLUSIVE mode' . I'm not sure why it can't mound the database and what should I do to make it working. Please can somebody show me how to make it working again. Here are the details about my problem
Enter user-name: SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 595591168 bytes
Fixed Size 1220748 bytes
Variable Size 301993844 bytes
Database Buffers 285212672 bytes
Redo Buffers 7163904 bytes
ORA-01102: cannot mount database in EXCLUSIVE mode
Thanks a lot in advance.

Thank you so much for both of you. I've checked everything. All looks fine to me and then i tried to connect though SQL and it worked. Now what I've notice that this time I didn't start Enterprise Manager only I started the listner and then start sql it worked. Does this means that I can't use both SQL and EM at a time together?

Database in Archivelog mode

Hi
All,
I have oracle 9.2.0.6 at my workplace.right now my database running in ARCHIVELOG MODE. I want to set it to NOARCHIVELOG MODE.
can I do on the fly? in other way, Do I need to shutdown and restart database?
Any help will be appreciated.
Thanks,
Vishal

Hi,
Issue the following commands to put a database into NOARCHVELOG mode:
1) Take Back up of Present SPfile by creating pfile
create pfile from present spfile.
2) Shutdown the database by SUTDOWN IMMEDIATE.
3) Take Cold backup of the database.
4) Change the parameter in the pfile.
log_archive_start = FALSE
#log_archive_dest_1 = 'LOCATION='Your location'
log_archive_dest_state_1 = DISABLE
#log_archive_format = %d_%t_%s.arc
5) And make a spfile from the modified pfile in default location .
6) Start the database with spfile.
SQL> CONNECT sys AS SYSDBA
SQL> STARTUP MOUNT ;
SQL> ALTER DATABASE ARCHIVELOG;
SQL> ARCHIVE LOG START;
SQL> ALTER DATABASE OPEN;
NOTE 1: Remember to take a baseline database backup right after disabling archivelog mode. Without it one would not be able to recover.
Regards
Jafar

Problem with Opening Outline in edit mode in Essbase

Hi ,
I am trying to open an outline in edit mode in EAS console, but I am getting the followong error
"There is a problem with locking the outline object ,error # 1,051,675"
Kindly help me to fix the issue.
Thanks,
Satheesh

Did you try google?
locking th eoutline error (Again a new feature of OTN)
Can you view the outline, if yes try the steps in Error Opening Database Outline in Edit Mode : "There is a problem with locking the outline object, error # 1,051,675" [ID 1491030.1]
I've seen this error (not sure about the number) where EAS cannot allocate more memory (for loading the outline). I'll try stopping apps and start this one and see if it fixes the issue.
Regards
Celvin
http://www.orahyplabs.com

Problem in Converting Database into Archivelog mode (Oracle 10G)

Hi Team,
I come across a strange problem in the ORACLE 10G Server.
I am converting database mode from NoArchivelog to Archivelog mode through RMAN in 10G.
Now When I execute these following commands through RMAN prompt it works properly as shown below?
C:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Thu Nov 30 18:01:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target /
connected to target database: RAVI (DBID=4025722893, not open)
RMAN> shutdown immediate;
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> STARTUP MOUNT;
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 167772160 bytes
Fixed Size 1247876 bytes
Variable Size 79693180 bytes
Database Buffers 79691776 bytes
Redo Buffers 7139328 bytes
RMAN> SQL 'ALTER DATABASE ARCHIVELOG';
sql statement: ALTER DATABASE ARCHIVELOG
RMAN> ALTER DATABASE OPEN;
database opened
RMAN>
But this same script when i writes in the backup.ora file & pass to Rman prompt it fails,
File backup.ora contains...
run
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
SQL 'ALTER DATABASE ARCHIVELOG';
ALTER DATABASE OPEN;
passed to RMAN as follows...
C:\OracleCode\BACKUP>"C:\oracle\product\10.2.0\db_1\bin\RMAN.EXE" target /"connect target SYSTEM/sreedhar@RAVI" log="C:\ORACLE~2\LOGS\backup_log.log" append cmdfile="C:\ORACLE~2\BACKUP\backup.ora"
RMAN> 2> 3> 4> 5> 6> 7> 8>
then it fails giving the following errors...
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 11/30/2006 18:05:59
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Recovery Manager complete.
The same thing is working in the Oracle 9i but not in the Oracle 10G.
Can Anybody plz help me in this?
Regards,
S.Tiwari
.

export ORACLE_SID=<SID>
rman target /cmdfile="C:\ORACLE~2\BACKUP\backup.ora"
it will connect to the default SID, there's no such thing as a default SID, what do you mean?
But what if there are more that one SID available & I
want to connect to SID other than the default SID.just specify the desired SID prior starting rman.
more over the same string is working with 9i but not
with 10G.maybe due to a bug?
to summarize, you have two options it you would like to start up the instance:
either you specify the SID prior starting rman and use os authentication
or
you register the instance statically and use oracle authentication.
regards,
-ap

It is possible to apply redo while the standby is open in read only mode ?

Hi,
I am using Oracle 11g R2 (11.2.0.1.0)
Step 1: Two node RAC is Configured.
Step 2: One node Data Guard RAC is configured.( i,e Standby is one node RAC).
Primary:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ WRITE PRIMARY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
Standby:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
Question:
I have not purchased active dataguard license.
In my case In Data Guard RAC it is possible to apply redo while the database is open in read only mode?
Thanks
Solaiman

876149 wrote:
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
"READ ONLY WITH APPLY" in V$DATABASE.OPEN_MODE means Active Data Guard is enabled.
Oracle code cannot check if you have the right license: it is up to you to know which license you have for your database environments.

Why we need oracle database reboot to put database in archivelog mode?

I know how to enable archivelog mode, but what is the reason that to enable archive log we need database restart. which process forces to do that.

SantoshGanjure wrote:
Thanks a lot EdStevens for ur prompt response...I need something that satisfies my managers query.
If the question has originated with the PHB, then my flippant answer is even more relevant ...
PHB's are incapable of understanding the technical details, so I prefer to give them the 'executive summary':
"Because that's the way Oracle is written. We can argue over the technical merits of such a requirement 'till the cows come home. But at the end of the day, we have to shut down the database because the 'alter database archivelog' command will only succeed when the database is in mount (not open) mode. Now, let's work out how we can achieve our objective of putting the database in archivelog mode with minimal and appropriately scheduled down time."
As for the actual down time, it's about as minimal as you can get. How long does it take your database to complete a shutdown once the command is given? How long does it take you to type "startup mount"? How long does it take you to type "alter database archivelog"? to type "alter database open;"? For the database to complete the 'open' process? You could even script it so as to eliminate the keyboard typing time.

Open Database In Parallel Mode

Similar Messages

Maybe you are looking for