Open iProcurement Smart form from a Third Party System

Hi,
I have a requirement to open the iProcurement smart form from a third party system. We have the Single Sign on functionality so the user can log into the oracle apps without entering the credentials.
Please share if someone has prior knowledge on that.
Thanks & Regards,
Munish Mittal

If the ICX_SESSION is already available then the form(I am assuming you are refering to a web based form here) should open directly if the function should be accessible to the user logged in. When you say your custom application is included in Oracle apps are you launching these pages from the Ebiz home page through menus and functions ?

Similar Messages

RFC Not found from the Third party system

Dear Friends,
I have customized a RFC, All components are active.
When I am searching the RFC from third party system this RFC is not able to find, others are showing.
What could be the reason..../
Thanks & Regards

Hi Sachin,
Just to be sure, could you please check whether the RFC radio button is selected in ATTRIBUTES Tab of SE37 for your RFC. Also check if the RFC is active.
Best regards,
Prashant

Consume WS from Third Party System in a SAP Portal

Hi everybody,
I would like to know if it could be possible to consume a WS from a Third Party System from a SAP Portal page or iView directly.
If not, could anybody propose a solution for that?
I thought about the possibility of creating a WebDynpro Java application which would consume this Web Service.
Thanks a lot.
Kind Regards,
Victoria

HI Victoria,
Create Web Dynpro Java application for consuming u Web services.Create SAP webdynpro iview Template to create your iviews.
Thanks,
Amith.

Accessing BW Query from Third Party System

Hi,
We have a requirement by which user can do the following through the third party system.
1. User will enter the Parameters in the third party system.
2. User will then call the BW Query with the above parameters from the third party system.
3. BW query should get execute based on the parameters (variables) and output to be displayed.
3. After displaying the output, the same should get passed into the db tables or the flat file to the third party system.
Ideal steps will be :
1. Enter the parameters in the third party system
2. Calling the query from third party system with the
parameters
3. Executing the BW query
4 Displaying the output and
5. Sending the output back to the third party system
Kindly advise how can we handle this scenario.
Regards
Ramesh Ganji

hi,
you can use third party etl tools. I used XtractIS for microsoft analysis services.
http://www.theobald-software.com/cms/en/xtract-is/xtract-is-plugnplay-mit-sap-und-den-ssis.html

Data upload from third party system to GRT table.

Hello,
Can you please let me know how we can upload payroll data from a legacy system (to be more clear, how to upload data that we receive from a third party system) into GRT table.
Note:The file should be tab delimited text file.
As of now, i figured out 2 FMs which I thought can be used.....BAPI_EXTPAYROLL_INSERT_OUT and BAPI_EXTPAYROLL_INSERT_LEGACY.
Please let me know the steps to upload the same (start to end). A code snippet will be of much help to me.
Regards,
RK

Are you looking for loading your legacy payroll data into SAP ?
SAP have a standard tables (T588B & T588C) that can be used along with standard schema (XLK0) for updating payroll results.
They also have a utility program to upload data into T588B & C.
Search for Legacy Data Transfer in IMG and yo will find the relevant steps.
Regards
Ravikumar

Integrating third party system

hi,
I have a requirement - when i press F4 in a standard SAP transaction I have to get the values from the third party system.
Please let me know if we can do this using BAPI or not.
If yes whats the procedure.
Any help will be appreciated.
Thanks!

Hi Pankaj,
Yes this is possible.
Create an RFC using SM37 transaction.
Build the logic to retrieve the data.
The 3rd party system also should have the necessary logic to be triggered once there is a call from RFC & get the primary keys based on which it will retrieve data & pass it to SAP.
Best regards,
Prashant

PO import from third party system

Hi All,
We have a third party system where PO's are created and imported into Oracle as an approved PO via Standard interface table. A PO was created in Aug 2012 and is stuck in interface tables with rejected status as the vendor site ID missing. So updated the interface table with vendor site ID. And ran import standard PO program. PO is imported but with the date in FEB 2013 instead of the date in Aug 2012. ( As the PO period for Feb 2013 is opened)Why it happened? And is there any way I can cancel/delete the PO from Oracle and resend it with the same old date I.e., Aug 2012 date and so that it can create with old PO Number.
Thanks in advance,
Regards,
Pramod

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

[svn:fx-trunk] 11488: Resubmitting binary distribution of xercesPatch. jar from the third party module in the SDK and compiled it with Sun JDK 1.4 .2_12.

Revision: 11488
Author:   [email protected]
Date:     2009-11-05 17:10:10 -0800 (Thu, 05 Nov 2009)
Log Message:
Resubmitting binary distribution of xercesPatch.jar from the third party module in the SDK and compiled it with Sun JDK 1.4.2_12.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-16818 - Must open-source the code for xercesPatch.jar.
Reviewer: Discussed with Gordon
Tests run: Checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16818
Modified Paths:
    flex/sdk/trunk/lib/xercesPatch.jar
    flex/sdk/trunk/modules/thirdparty/xerces-patch/build.xml

Did you try this:
http://forum.java.sun.com/thread.jsp?thread=434718&forum=60&message=1964421

Read the pdf file from the Third party server.

hi all,
we got the requirement that we have to display the salary statement and form16 in the portal.
we are not using the sap for the pay roll.
pay roll will run by the third party....they will keep all salary slips in the one folder under the server.
so from the third party server we have to get the salary statement in to our application......third party will storing the file with salcode.pdf.
can you help me to resolve this?
Thanks in advance
swapna

Hi yugedhar,
thank you for the reply.
the pdf files will be available in one common folder , with in the server only.
so i have to implement the code to download the file from the one particular location based on the name of the file
(means if file name =Login id that has to open)
so can you help me implement this logic .
Thank you
swapna

How can I call reports from a third party tool?

Hi!
I'm a Delphi 6 developer and our company has a customer that want to call reports created in Crystal Reports directly from our software.
What is the quickest way to open a report from a third party tool (passing parameters) ?
There is a way to do that without embedding Crystal VCL components in Delphi? I'm searching for a command line tool or a way to open it with URLs....
Thanks in advance!
Edited by: AlmirB on May 23, 2011 6:25 PM

One of the 3rd-party Crystal Reports viewers listed at http://www.kenhamady.com/bookmarks.html provides a full command line API, so you can call a report from your app and pass parameter values, login info, etc.

Can i return an iPod to apple from a third party seller

I got an ipod from amazon. Found out it was from a third party seller and not amazon itself. I got it out and set it up. I recieved a case for it in the mail 2 days later and went to put it on. At that point I realized that it does not have a rear facing camera. I want to return it, but they won't take it back because I opened it. I didnt know it didnt have a rear facing camera. Anything I can do besides trying to sell it myself?

Apple will not take it.
Sell it.

I got my phone fixed from a third party and now my phone won't even come on and my screen turns blue and starts all over again. Is there a way I can get it fixed

BBroken screen got fixed from a third party and now the apple sign shows for about 25 seconds and then it turns blue and starts all the way over

The problems go deeper than the screen...the person who did the repairs has not made all of the connections correctly. The iPhone needs to be opened again, and then reconnect the new screen and be sure all other connections are still in place where they should be.

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Receiving a calendar event message from a third party on a BB Z10

I have a BB Z10 on the UK Vodafone network. My Z10 is set to GMT time and correctly shows that I am in the "Dublin, London" time zone. This is the GMT time zone description that all BB devices that I have ever owned have shown.
This afternoon (UK time) i received a calendar event notification from a client who I have since established was at his desk in London when he sent the message advising me of a conference call to take place next week.
The advice on the Z10 has five clear sections: "Status", "Date", a bell symbol to indicate when the reminder will sound, and a fifth symbol indicating the number on which to call in, and the PIN code.
However, and this is my serious problem, there is a third section on the advice which has a globe symbol and appears to exist to indicate where the person setting up the event was located when he/she sent the message. In the specific case of which I write, the message states "This event is displayed in local time, but was created in Reykjavik (GMT) [sic}". The actual message shows the time for the event as one hour later than the actual time that the event is scheduled to take place - in other words GMT + 2 hours - namely the time in continental Europe and Reykjavik.
I have serious issues with this:
1) Is it the real intention to indicate where the sender of the message was located when the message was sent?
2) if yes, this is a serious breach of privacy
3) if yes, the location is wrong, as the person who sent me the message has confirmed that he was at his desk in London
4) if no what is the purpose in indicating where "the message was created" (BB's words - not mine)
5) the indicated time of the event is wrong - it has assumed a different time zone than that in which I and the sender are located.
Has anyone else encountered this problem and what has BB got to say about it???
Thanks
PJCMoray
PJCMoray

I received the e-mail notification on Microsift Outlook from a third party (i.e. not someone within my own organisation).
The same invite on both my lap-top computer and my BB 9900 Bold did not have any mention about the sender being in Iceland (or anywhere else!) and showed the correct time and time-zone for the agreed meeting - namely, 8,30am on Friday the 19th April.
I confirm that my Z10 is set to the "Dublin, London (+0)" time zone and is currently showing the correct British Summer Time of 16.31. The device switched automatically to British Summer Time on Sunday 31st March.
I would welcome your comments.
In every other respect (apart from the infamous Outlook USB synching issue about which I am sure you have heard more than enough!!), the Z10 is an outstanding device and deserves to be the device which at long last wipes the smile off the faces of those equine rumps in Cupertino, California!!
I am expecting the roll-out of the Q10 in the UK in a couple of weeks - please??!!
Thanks again for your help and assistance
PJCMoray
PJCMoray

Open iProcurement Smart form from a Third Party System

Similar Messages

Maybe you are looking for