Open Multiple files in One go......

Hi all,
I need to open multiple file jpg files present at a particular location in one go. I am developing the application in ADF and i used the following code in for loop
response[i] = (HttpServletResponse) fctx.getExternalContext().getResponse();
// file should be downloaded without display
response.setContentType("application/x-download");
response[i].setHeader("Content-Disposition", "attachement; filename=\"document "+listFiles[i].substring(0,(listFiles[i].length()-4))+".bmp\"");
but it opens only one file(the last one of the for loop). Finally i evn tried Runtime.getruntime again in a for loop, still it didnt work.
I got an option from somewhere sugggesting to use firebox viewer. I browsed for the software, but found thatfirebox can open multiple url's in one go and did'nt get any relevant help regarding firebox viewer.
Is Firebox viewer a component of firebox???If so how to use it to open multiple jpg files???
How to integrate this firebox viewer with ADF???
Any help???
Regards,
Amitt

No, I have idea about FifreFox Brower, its about FireFox viewer, may be a plug in or component of Browser(Even I am not sure whether there is any component like viewer or not???),
But the key is that ki i want to open a multiple jpg files in one go. Whether using FireFox Viewer or something else it does'nt matter.
Any suggestion????
Amitt

Similar Messages

How to Open Multiple Files into One Image with a Format Plug-in?

Basic overview question:
I'm interested in creating a format plug-in that will open multiple image files and combine them, then provide one image to Photoshop for further work.
1. Can an .8bi plug-in receive notification of multiple files to be opened? (Not unlike Camera Raw). Or does one absolutely need to use an .8ba Import plug-in to do this? I would prefer .8bi.
2. Assuming yes, could the latter parts of the plug-in interface be used to open just one combined image?
Thanks!
-Noel

1) An import plugin (8bi) doesn't get file information - it has to provide it's own open dialog. Only a file format plugin gets a file, but only one at a time. (ACR has some special magic)
You might want to take a look at the PhotoMerge and MergeToHDR setups with a script driving a plugin.

How to open multiple files on one layer

hi there,
I have a fairly simple problem and I browsed through all the different FAQs to find it but nothing came up. In any case, my question is how do you select multiple files (in this case PNGs) and open them as individual layers on one file instead of opening them as separate files?
easy huh? I'm a noob ok.
thanks
-Chance

Russell Brown has a CS4 version of his services.
As Wolf points out, if you have CS4 then you already have access to a script that will also do what you want. I happened to notice though, that the built-in script and the Russell Brown script work slightly differently. The RB script will crop all images based on the first one loaded. The built-in script will apparently use the dimensions of the largest image.
It was a nit but I thought the title of the thread would be more accurate as "Help opening multiple images as layers in a single file" or something like that.

Ability to view multiple files in ONE window

I can see here that this is not a new topic really but the thing with Acrobat 9 is so frustrating that it is just unbelievable.
This is another pearl:
Acrobat 9 "lost" its predecessors ability to view multiple files in ONE window. After opening four only documents I cannot see anything on the screen because the toolbars on each individual window cover all necessary view and nothing is left for the actual document. And sometimes I need to open 20 documents!
This is ABSOLUTE DISASTER!!!
I found some explanations from Adobe on the Web that are more than a year old.
I was sure that by now this unfortunate mishandling of that feature (apparently it was dropped out from A9 deliberately - WHO'S IDEA WAS THAT?) would be somehow restorable.
Would anyone happen to know if this feature can get restored to how it was working in A7 or 8 (without the need to uninstall A9 and install A8)?

No, it can't be restored, unless Adobe decides to change the way Acrobat works (which is possible, but not likely).
By the way, it was Microsoft's idea... Adobe were just following their example on this.
You can make a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Preview and Texteditor open multiple files

Preview and Texteditor often open multiple files when I only clicked a single file. It seems to open one or more previously opened files at the same time. Is this a bug, or can I disable this behaviour somewhere?

"Restore windows when quitting and reopening apps" worked for me. However, it will not work for any apps currently open when you change the preference. Once you quit ans recopen the app, it should work. At least mine did!

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Mii attach multiple files in one e-mail

Hello everyone
This is Yuko.
There are two MII may have a problem with email attachments.
1. Once you attach multiple files in one e-mail
Please tell me how this
2. Can not be above 1, and compiled into a single ZIP file.
Now, I can attach multiple files in one e-mail,
When you extract the ZIP, just made away with the file directory path is created,
you can not open the attachment and open the folder several times.
Anyone know a solution to this problem, please tell me.

Kevin, Thanks for answers.
My English is poor. Sorry.
Your answer is, we assume that the permit issue, and probably would not matter. Again, write the points in need.
For example, the two CSV when put together in one ZIP file, the workbench in the CSV file to specify the full path. CSV file, the workbench under the Web folder and then five in the second tier. At this time, who received an email with this attachment is to open the attachments, ZIP and open the file, open the following folder hierarchy, the next ..., and, many times to open the folder , will finally open a CSV file. Many times without opening the folder you want to open a CSV file.
We look forward advice.

Acrobat Standard 9.0 automatically opens multiple files on startup

This problem was originally posted as "Acrobat Standard 9.1.2 update problem?"
In Vista Ultimate, I installed the Acrobat Standard 9.1.2 update, and afterward, my terminal began automatically opening multiple PDF files whenever Acrobat was started. At one point, I let it run for several minutes, and got up to 33 opened files before I forced the program to shut down.
Although this problem was resolved by a program removal and reinstallation (restore previous version didn't work), it came back again, after I had worked on several PDF files since the reinstall. Apparently, Acrobat feels compelled to open all of the PDF files I have worked on since the reinstallation, whenever it starts up. In addition, it opens copies of all of these files when I open a Website PDF file. So I have two copies of the same filename open at the same time (usually impossible in Windows). Since I removed v9.1.2 and reinstalled v9.0, the problem might not be connected to the 9.1.2 update I installed before it began; however, the 9.1.2 update might have made changes to the registry that the uninstall didn't correct.
HAS ANYONE ELSE EXPERIENCED AUTOMATIC MULTIPLE FILE OPENINGS IN ACROBAT STANDARD 9.0 OR 9.1.2, AND IF SO, WHAT DID YOU DO ABOUT IT? I'm desperate enough to seek technical advice from a random group of strangers.

I was having this problem on a Vista Ultimate machine after upgrading to Acrobat Pro 9.2, and solved it in the following way.
1. Exit Acrobat, open the task manager and be sure the acrobat.exe task is no longer running.
2. Open the directory C:\Users\<username>\AppData\LocalLow\Adobe\Acrobat\9.0
3. Locate the file named Organizer90 and drag it to the desktop
4. Open Acrobat from the Start menu
Problem should be solved! If not, exit Acrobat and drag the original Organizer90 file back to the original directory (replacing the newly created file). I have no idea what the Organizer90 file does, so I don't know if you may be losing anything important using this method, but it did work for me in solving the "opening multiple files" problem.

Acrobat Pro 9.3 Crashes when opening multiple files

Acrobat Pro 9.3 Crashes when opening multiple files. I have not seen any solutions in forums that solves this problem. I have just done the most recent update and it still crashes.

Acrobat Pro 9.4.2 (CS5) is doing the same thing on my Windows XP SP3 with 3.5 GB of ram and 206 GB of my brand new 300 GB hard drive free.
It starting doing this at the end of last year before my hard drive died. Then after rebuilding the entire system on this new drive it worked fine, until I downloaded all the updates and now it is broken again. Anytime I open more than one PDF, Acrobat crashes. I send the error report every time.

Unable to open multiple files of different types simultaneously

It seems the MS has made some changes in Win7, and I am no longer able to open multiple files of different types (.doc, .pdf) in Explorer by highlighting the desired files and hitting Enter. It still works if I select only one file type, but
the ability to open multiple files of different types has been in place since Win95, and maybe since Win3.11 (my memory is a little foggy that far back).

Hi,
Yes, this feature was removed from Windows 7. Now you just can open multiple files which are the same type at once.
Karen Hu
TechNet Community Support

Opening multiple files in OS X

Hi there,
Sorry if this is a noob question but I couldn't find the answer online!
Do anyone happen to know if there is a keyboard shortcut to open multiple files in Dreamweaver on OS X... I click on each with Command held to select multiple files, and I know you can double click on one to open them all...
In the Windows version I used to just press Enter to open them and I prefer that, so if there's an OS X equivalent that would be awesome!
Thanks,
Neil

No joy I'm afraid... nothing happens with that either...
It would be cool to have a keyboard shortcut as I'm so used to renaming a file then hitting enter to open it!
One of those minor little irritations I guess!
Thanks

Missing photos when opening multiple files into Photoshop from LR3.2

When I try to open multiple files (8+ maybe) from Lightroom 3.2 to edit in Photoshop CS5, almost always one or two photos does not open. This means I have to manually find out which photos are missing, and then reopen them.
Can anyone help me with this problem??

I have opened as many as 50 from external hard drive with LR 3.2 and Windows XP with no problem.
It takes a long time to bring in this many if they are 100MB tiffs. I had to go have coffee and come back later.
Are you sure you waited until it was finished?

Indesign CS5 freezes when opening multiple files

When I try to open multiple files at the same time it will show the files on screen as if they are open but then a popup will come up that says "Open 2 Documents" and it never completely finishes loading and freezes up Indesign. I am unable to cancel the dialog box and have to use ctrl+alt+delete to close the program and then open the files one at a time. When I open the program again it then has the files loaded and ready to go. I am working on Windows 7 Professional and I don't have any Indesign Plugins that I use. Extensis Suitcase font auto-activation is turned off.

Dear all,
I think I have the same problem... or not ?!
=> When I try to open multiple files at the same time it opens only the 2 or 3 first ones then it freezes on the Spinning Beach Ball of Death !
=> Then it never completely finishes loading and freezes up Indesign.
=> I am unable to cancel the dialog box and have to use cmd+alt+esc to close the program
=> then, the files open directly on indesign when I open the program again (jus as if the files had been loaded and ready to go)
I am working on MAC OS X (10.7.3)
Anybody could help please ?? (sorry for my english... I'm a French native speaker)

Is there a way to open multiple files at once with the new download manager?

It was possible to do this with the old one by right-clicking and selecting "open", but I haven't been able to find a way to make it work with the new one.

I looked at the download section of the Library dialog, which you can open using either:
* Show All Downloads
* Ctrl+j
I couldn't figure out any way to open multiple items in one step. I can select multiple items, but... no way to launch them. Seems you need to double-click or press Enter to open a single selected item, and repeat for each item you want to open.

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Open Multiple files in One go......

Similar Messages

Maybe you are looking for