Open source surveillance system

can I edit the codes of iSpy and Video Insight sir? thank you

do you know any open source surveillance system that can be edit the codes? please i need help for my thesis entitled "spy camera with SMS alert system" i hope you guys help me. thankyou :)
This topic first appeared in the Spiceworks Community

Similar Messages

Connecting Websphere MQ with another open source Queuing System

Hi everybody,
i work in a company that has already purshaced Websphere MQ as MOM, and we have some clients that unable to buy it. So is it possible that we find an open source queuing system such as ( openMQ, ActiveMQ ....) able of sending messages to a websphere MQ over a secured channel. I couldnt find any site on the internet that's telling me straightforward that this or that queuing system is able to connect with websphere MQ. So i'm begining to believe that it's impossible to have 2 different queuing systems working together and that it has to happen through an application server. Is that true ?? that every queuing system could only send messages to the same system and if not what open source queuing systems i can use with Websphere MQ ?? I'm really puzzled and hope anyone could help.
Thank You

Thanks. James.
I posted the same message to servicemix user forum.
I have tried including jboss client jars and wl jars in classpath. I started servicemix. It looked OK without errors. However when I publish jms meesage in the destination in jboss (servicemix was supposed to sub the msg from the jboss destination and pub it to wl destination), I got the following errors
C:\incubating-servicemix-3.0-SNAPSHOT\examples\jms-bridge>servicemix servicemix.xml
Apache ServiceMix ESB: 3.0-SNAPSHOT
Loading Apache ServiceMix from file: servicemix.xml
INFO - JBIContainer - Activating component for: [container=ServiceMix,name=#SubscriptionManage
INFO - ComponentMBeanImpl             - Initializing component: #SubscriptionManager#
INFO - DeploymentService              - Restoring service assemblies
INFO - JBIContainer                   - ServiceMix JBI Container (http://servicemix.org/) name: ServiceMix runni
INFO - JBIContainer                   - Activating component for: [container=ServiceMix,name=myJmsReceiver] with
INFO - ComponentMBeanImpl - Initializing component: myJmsReceiver
INFO - JBIContainer - Activating component for: [container=ServiceMix,name=transformer] with s
INFO - ComponentMBeanImpl - Initializing component: transformer
INFO - JBIContainer - Activating component for: [container=ServiceMix,name=transformedSender]
INFO - ComponentMBeanImpl - Initializing component: transformedSender
INFO - JBIContainer - Activating component for: [container=ServiceMix,name=myJmsSender] with s
INFO - ComponentMBeanImpl - Initializing component: myJmsSender
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
[Fatal Error] :1:1: Content is not allowed in prolog.
ERROR - ServerThread - socket timed out
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
at java.io.FilterInputStream.read(FilterInputStream.java:66)
at org.jboss.serial.io.JBossObjectInputStream.read(JBossObjectInputStream.java:140)
at org.jboss.remoting.transport.socket.ServerThread.readVersion(ServerThread.java:464)
at org.jboss.remoting.transport.socket.ServerThread.processInvocation(ServerThread.java:381)
at org.jboss.remoting.transport.socket.ServerThread.dorun(ServerThread.java:498)
at org.jboss.remoting.transport.socket.ServerThread.run(ServerThread.java:240)
Note: please ignor the transformer which I did not use it in the test. My servicemix.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<beans xmlns:sm="http://servicemix.apache.org/config/1.0" xmlns:foo="http://servicemix.org/demo/pipeline/">

<sm:container id="jbi" embedded="true">
<sm:activationSpecs>
<sm:activationSpec componentName="myJmsReceiver" service="foo:myJmsReceiver" destinationService="foo:jmsSender">
<sm:component>
<bean class="org.apache.servicemix.components.jms.JmsReceiverComponent">
<property name="template">
<bean class="org.springframework.jms.core.JmsTemplate">
<property name="connectionFactory">
<ref bean="jbossConnectionFactory" />
</property>
<property name="defaultDestination" >
<ref bean="jbossSourceDestination" />
</property>
<property name="pubSubDomain" value="true" />
</bean>
</property>
</bean>
</sm:component>
</sm:activationSpec>
<sm:activationSpec componentName="transformer" service="foo:transformer" destinationService="foo:transformedSender">
<sm:component>
<bean class="org.apache.servicemix.components.xslt.XsltComponent">
<property name="xsltResource" value="classpath:org/apache/servicemix/components/xslt/transform.xsl" />
</bean>
</sm:component>
</sm:activationSpec>
<sm:activationSpec componentName="transformedSender" service="foo:transformedSender">
<sm:component>
<bean class="org.apache.servicemix.components.jms.JmsSenderComponent">
<property name="template">
<bean class="org.springframework.jms.core.JmsTemplate">
<property name="connectionFactory">
<ref local="jmsFactory" />
</property>
<property name="defaultDestinationName" value="demo.cheese.result" />
<property name="pubSubDomain" value="true" />
</bean>
</property>
</bean>
</sm:component>
</sm:activationSpec>
<sm:activationSpec componentName="myJmsSender" service="foo:jmsSender">
<sm:component>
<bean class="org.apache.servicemix.components.jms.JmsSenderComponent">
<property name="template">
<bean class="org.springframework.jms.core.JmsTemplate">
<property name="connectionFactory">
<ref bean="weblogicConnectionFactory" />
</property>
<property name="defaultDestination">
<ref bean="weblogicTargetDestination" />
</property>
<property name="pubSubDomain" value="true" />
</bean>
</property>
</bean>
</sm:component>
</sm:activationSpec>
</sm:activationSpecs>
</sm:container>
<bean id="jmsFactory" class="org.apache.activemq.pool.PooledConnectionFactory">
<property name="connectionFactory">
<bean class="org.apache.activemq.ActiveMQConnectionFactory">
<property name="brokerURL" value="vm://localhost?broker.persistent=false" />
</bean>
</property>
</bean>
<bean id="jbossJndiTemplate" class="org.springframework.jndi.JndiTemplate">
<property name="environment">
<props>
<prop key="java.naming.factory.initial">
org.jnp.interfaces.NamingContextFactory
</prop>
<prop key="java.naming.provider.url">
jnp://L71037263:1099
</prop>
<prop key="java.naming.factory.url.pkgs">
org.jboss.naming:org.jnp.interfaces
</prop>
</props>
</property>
</bean>
<bean id="jbossConnectionFactory"
class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiTemplate">
<ref bean="jbossJndiTemplate"/>
</property>
<property name="jndiName">
<value>ConnectionFactory</value>
</property>
</bean>
<bean id="jbossSourceDestination"
class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiTemplate">
<ref bean="jbossJndiTemplate"/>
</property>
<property name="jndiName">
<value>topic/testTopic</value>
</property>
</bean>
<bean id="weblogicJndiTemplate" class="org.springframework.jndi.JndiTemplate">
<property name="environment">
<props>
<prop key="java.naming.factory.initial">
weblogic.jndi.WLInitialContextFactory
</prop>
<prop key="java.naming.provider.url">
t3://enic01.ed.ray.com:7001
</prop>
</props>
</property>
</bean>
<bean id="weblogicConnectionFactory"
class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiTemplate">
<ref bean="weblogicJndiTemplate"/>
</property>
<property name="jndiName">
<value>mil/dcgs/jms/mdf/catalogConnectionFactory</value>
</property>
</bean>
<bean id="weblogicTargetDestination"
class="org.springframework.jndi.JndiObjectFactoryBean">
<property name="jndiTemplate">
<ref bean="weblogicJndiTemplate"/>
</property>
<property name="jndiName">
<value>topic/GMTIDetections</value>
</property>
</bean>
</beans>
Thank you very much if you have any idea on it!!!!!
By the way, I wonder how the servicemix jms bridge works. did I use it correctly?
-

Data Migration from IDES to Vanilla open source SAP System

Can any one help me as to what are the SD tables that should be migrated between 2 SAP systems in order to operationalize a complete Sales Cycle . This information has to be provided to the Basis team . Where i should i start from and what should be my approach ?

Tables in Sales and Distribution (SD) :
Document Flow
VBFA - Document flow (alg.)
VTFA - Flow shipping documents
Sales order :
VBAK - Header data
VBAP - Item data
VBPA - Partners in sales order
VBKD - Sales district data
VBEP - Data related to line items, delivery lines
Billing document :
VBRK - header data
VBRP - Item data
Shipping :
VTTK - Shipment header
VTTP - Shipment item
VTTS - Stage in transport
VTSP - Stage in transport per shipment item
VTPA - Shipment partners
VEKP - Handling Unit - Header Table
VEPO - Packing: Handling Unit Item (Contents)
Delivery :
LIKP - Delivery header
LIPS - Delivery item
Pricing :
KONH - Conditions header
KONP - Conditions items
KONV - Procedure ( billing doc or sales order)
KOND
Contracts :
VEDA - Contract data
Regards,
Rajesh Banka

�Is Sun System Instant Messaging a Multiplatform Open Source Application?

This Because I am searching a highly Compatible Open Source WEB Enable Client/Server Application or a robust Multiplaform Instant Messaging System for Academic Purposes.
I searching to obtain a WEB Enable Instant Messaging Application Open Source in Java like MSN Messenger Client/Server for Academic Purposes?
I find Jabber as an alternative Instant Messaging solution but the clients and servers Applications there aren't highly compatibles.
I thank in advance for their valuable time. And for the attention and the collaboration lent me.

I believe there are currently two open source J2EE 1.3 compliant appservers:
JOnAs http://jonas.objectweb.org/
JBoss http://www.jboss.org/
Both have beta versions of their J2EE 1.4 offers. If what you are looking for is not actually open source but simply free as in beer, then Sun's appserver is a rather attractive option. It's already J2EE 1.4 certified because it is the J2EE 1.4 reference implementation. You can download it as part of the J2EE SDK from here http://java.sun.com/j2ee/1.4/download-sdk.html

Open Source Customer Service Request System

Hi Does,
Anybody know of a Open Source Customer Service Request System (AKA Helpdesk) written in Java.
Thanks

No idea but I did get almost 27,000 hits in google with the following search string....
helpdesk java "open source"

Is the blackberry operating system open source?

Hi,
Is the blackberry operating system open source? Or is there a developers SDK?
What do I need to do if I want to create software for the blackberry?
Thanks!
Juggernaut

No, BlackBerry OS is not open source. Yes, there is a BlackBerry JDE. Click the Developers link above to find all the developer resources.

[Solved] Slow graphics with RS780M and open source ati driver

EDIT: Well this is embarrasing. Guess this is why there's a new comers forum. I assumed since I installed a couple days ago my system was up to date. However, running pacman -Syu updated my kernal and it works fine now. SOLVED (I'm an idiot)
Hello Arch community. I've been using Ubuntu for a couple years so know that my hardware can work well enough with linux. Almost everything works great with arch with little setup, but I'm stumped as to how to setup the graphics card.
I'm attempting to use the open source drivers, either xf86-video-ati or xf86-video-radeonhd (I don't care which I use in the end). I have both installed so I can try out both, assuming that doesn't cause problems. I've never tried using the catalyst driver in arch, so I know I don't have remenents of that causing problems. Right I have gnome working, but when dragging a window, resizing a window, scrolling, or watching a video I can see the screen slowly refresh. It is definetly not right.
Here's the information that might help:
[jake@myhost ~]$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
I've tried various configurations. Right now I'm running without an xorg.conf. This is /var/log/Xorg.0.log from the setup without an xorg.conf
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 11:58:06 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x92300000/65536, 0x92200000/1048576, I/O @ 0x00005000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 0000000092300000
(II) RADEON(0): MMIO registers at 0x0000000092300000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(WW) RADEON(0): R600 support is mostly incomplete and very experimental
(--) RADEON(0): Linear framebuffer at 0x0000000080000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x30f2
IOBaseAddress: 0x5000
Filename: BR28896C.bin
BIOS Bootup Message:
HP_QT8 RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 69300
HBlank: 135, HOverPlus: 48, HSyncWidth: 32
VBlank: 16, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-B
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 80000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 255712 kb for X Server offscreen at offset 0x00648000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Mode 1280x800 - 1415 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event13"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've also tried it with many xorg.conf files without finding any which give me the same graphics performance I have in ubuntu. Here's the one I was using, with the comments showing some other things I tried.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 60.0
VertRefresh 55.0 - 70.0
#Option "UseEdidFreqs" "1"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
#Driver "radeonhd"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
#Added optimizations
Option "AGPMode" "8"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
#Option "XAANoOffScreenPixMaps" "1"
Option "RenderAccel" "true"
Option "DRI" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
# Option "Composite" "On"
Option "Composite" "Disable"
EndSection
#Section "ServerFlags"
# Option "AIGLX" "On"
#EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Just in case this help:
[jake@myhost ~]$ modinfo radeon
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/radeon/radeon.ko
license: GPL and additional rights
description: ATI Radeon
author: Gareth Hughes, Keith Whitwell, others.
depends: drm
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: no_wb:Disable AGP writeback for scratch registers (int)
[jake@myhost ~]$ modinfo drm
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/drm.ko
license: GPL and additional rights
description: DRM shared core routines
author: Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl
depends: agpgart,i2c-core
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: debug:Enable debug output (int)
Any ideas?
Last edited by Coward (2009-06-25 06:40:51)

Coward wrote:I can't see a way to mark this thread as solved or anything, but it is solved.
Just click edit on the lower right of your first post and you can edit the subject
http://bbs.archlinux.org/viewtopic.php?id=50161

[SOLVED] ATI (open source) Graphics Issue due to Upgrade

Shadowrun Returns finally loaded (after ages) but performance was abysmal whereas I was playing it with the same settings flawlessly yesterday. L4D2 was "laggy" while clicking in the interface and on the opening video, and then I got sound with a black screen and had to kill the process.
I believe it is related to a recent update in one of the following packages (at least I did not have this problem yesterday, and I updated first thing this morning):
[2014-05-06 08:32] [PACMAN] starting full system upgrade
[2014-05-06 08:32] [PACMAN] upgraded mesa (10.1.1-2 -> 10.1.2-1)
[2014-05-06 08:32] [PACMAN] upgraded mesa-libgl (10.1.1-2 -> 10.1.2-1)
[2014-05-06 08:32] [PACMAN] upgraded ati-dri (10.1.1-2 -> 10.1.2-1)
[2014-05-06 08:32] [PACMAN] upgraded x265 (0.9-1 -> 1.0-1)
[2014-05-06 08:32] [PACMAN] upgraded ffmpeg (1:2.2.1-1 -> 1:2.2.2-1)
[2014-05-06 08:32] [PACMAN] upgraded lib32-mesa (10.1.1-1 -> 10.1.2-1)
[2014-05-06 08:32] [PACMAN] upgraded lib32-mesa-libgl (10.1.1-1 -> 10.1.2-1)
[2014-05-06 08:32] [PACMAN] upgraded lib32-ati-dri (10.1.1-1 -> 10.1.2-1)
There doesn't seem to be much useful output when starting Steam from the command line here's the beginning output:
Running Steam on arch rolling 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1398287272_client)
libGL error: dlopen /usr/lib32/xorg/modules/dri/r600_dri.so failed (/home/username/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib32/xorg/modules/dri/r600_dri.so))
libGL error: unable to load driver: r600_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: r600
Installing breakpad exception handler for appid(steam)/version(1398287272_client)
(steam:1501): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
(steam:1501): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
/usr/share/themes/Adwaita/gtk-2.0/gtkrc:1137: error: unexpected identifier `direction', expected character `}'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
My card shouldn't be using the r600 driver (mine is a Radeon HD 5770) and it's quite possible those errors have always been there.
Any help would be greatly appreciated.
Last edited by cyrxi (2014-05-06 15:03:55)

I have similar problem. I have removed steam-runtime libstdc++ libraries (I could not start game with them), but performance is very low. I use open source ati drivers (lib32-ati-dri also installed) and have Radeon 7770. Some time ago I could play Super Meat Boy with good performance, but now even intro is like 5 FPS which is obviously now what I expected. I am rather casual player so I can't say when (after which update as I presume) performance were redused. System is up-to-date.
I noticed that if I use AccelMethod "EXA" hardware acceleration do not work, with "GLAMOR" I have artefacts (e.g. with title bar and context menu) in KDE, but it run at normal SMB at normal speed. According to Arch Wiki there is a bug in X11 related to GLAMOR.
Last edited by fenuks (2014-05-10 21:27:11)

ADF (View Object) with open source database

Hi all,
Recently, I am evaluating JDeveloper 9.0.5.2 ADF with an open source database (Firebird).
I follow the instruction to:
1. Create an entity object
2. Create a view object for the entity object in 1
3. Create an application module for the view object in 2
4. Right click on the application module and test -> all worked fine
5. I created a jsp and drag the view (in 2) to it from Data Control Palette
6. Test it in OC4J -> an error occurred (not because of jdbc config)
JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT Department.DEPT_NO, Department.DEPARTMENT AS DEPARTMENT1, Department.HEAD_DEPT, Department.MNGR_NO, Department.BUDGET, Department.LOCATION, Department.PHONE_NO FROM DEPARTMENT Department) QRSLT ORDER BY DEPT_NO
GDS Exception. 335544569. Dynamic SQL Error SQL error code = -104 Token unknown - line 1, char 16 SELECT
To my knowledge, the error should be due to Firebird doesn't support the query syntax " select * (select col1, col2... from table) QRSLT where... order by... "
I am quite headache as this query is automatically generated by JDeveloper. I am figuring out whether I can change it. It seems that I have to play with the ViewObjectImpl class.
I do think ADF is an amazing technology. However, is it only so amazing with the Oracle technologies? Please correct me if I am wrong.
Hons

Dear Shay Shmeltzer,
Thank you for your reply. After hours of trying on Firebird, I still get the error:
JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT Department.DEPT_NO, Department.DEPARTMENT AS DEPARTMENT1, Department.HEAD_DEPT, Department.MNGR_NO, Department.BUDGET, Department.LOCATION, Department.PHONE_NO FROM DEPARTMENT Department) QRSLT ORDER BY DEPT_NO
GDS Exception. 335544569. Dynamic SQL Error SQL error code = -104 Token unknown - line 1, char 16 SELECT
I then downloaded the MySQL 4.0 and install on my system to do the exact procedures. No error! Thing works fine! Oh man...
For the Firebird case, a strange thing to note is that the data table (I dragged) contains data, but the error message is on top of it.
Actually, I don't have a particular database preference but I do hope ADF can work equally for these open-source databases. I think the problem may also be contributed by Firebird. Hope that I can figure it out this week.
Regards,
Hons

Huge Hole in Open Source Software Found, Leaves Millions Vulnerable

Huge Hole in Open Source Software Found, Leaves Millions Vulnerable
Debian, the Linux variant used largely by security professionals, and Ubuntu, the variant most commonly used by home users are both affected. Furthermore, Windows servers may be compromised as well if they are using keys generated on Linux systems.
Ironically the bug originated from an automated tool known as Valgrind which is supposed to reduce programming bugs which lead to security vulnerabilities. It found that a block memory was not being properly initialized, meaning that it would contain random information. The automated tool politely inserted code to clean up the block of memory making it all zeros. The only problem was that the system was intentionally using the block's unknown to get randomness to generate the keys. The library also gets randomness from mouse movements, keystroke timings, network packet arrival timings, and even microvariations in hard drive speed.
The Valgrind code caused errors, so the programmers simply commented out all the code, including the other methods of generating randomness on accident. Only the code which utilized the process ID, an integer ranging from 0 to 32,767, remained to provide randomness. It turns out the "fix" turned grievous error was not the work of the OpenSSL programmers themselves, but of the Debian team, known for their security expertise.
OpenSSL developer Ben Laurie raged, "Never fix a bug you don't understand! Had Debian [sent the bug to us] in this case, we (the OpenSSL Team) would have fallen about laughing, and once we had got our breath back, told them what a terrible idea this was. But no, it seems that every vendor wants to 'add value' by getting in between the user of the software and its author."

firewalker - this was discussed here and on our mailing lists at the time the vulnerability was discovered, approximately two weeks ago. It's always a good idea to search the forum before posting.
http://bbs.archlinux.org/viewtopic.php?id=48660
Thread closed.

EngLab - Open source mathematical/engineering platform

Hello all,
I'm new to Archlinux and quite exited with it. Anyway, some colleagues of mine from the University and me have created an engineering platform for the Linux platform, although Windows builds are also available. If you like check it out, but be aware that it's still on an early development stage.
(I hope this is the right board to post this )
Website: http://englab.sourceforge.net/
Now that I am into Arch I'm going to make some research and create a build system for it to run on Arch and with your help maybe enter the AUR.
Here is our press presentation for the first big release (now we're on 0.2.1alpha):
We are pleased to inform you that the 0.2alpha release of the open-source program EngLab has been published.
Our site is located to englab.sourceforge.net . You can download it from https://sourceforge.net/project/showfil … _id=206384
EngLab is a cross-compile mathematical platform with a C like syntax, intended to be used both by engineers and users with little programming knowledge. The initiative has been taken from a group of students a year ago.
Our goal is to develop an easy-to-use computaion and simulation platform with a C++ like syntax. We have adopted Matlab's structure philoshophy and C++ 's structured language syntax. There are various toolboxes (packages of functions relative to a certain scientific field), which depend on open-source libraries.
The EngLab distribution is available in two ways: there are two basic Englab releases, EngLab Console and EngLab GUI. EngLab Console allows EngLab's execution through the console(Linux or Windows). EngLab GUI gives the opportunity of using EngLab through a graphical user interface. EngLab GUI is implemented with the use of the open-source library wxWidgets 2.8, providing additional usability compared to EngLab Console edition. EngLab GUI is independent, so there is no need for EngLab Console to be installed, in order to properly install and execute EngLab GUI.
Toolboxes are distributed as seperate packages. Their installation is possible either through EngLab Console or EngLab GUI. The reason is that those toolboxes depend on open-source libraries that have to be previously installed. So as the user not to be forced to install those libraries directly, user can install packages and toolboxes at his/her own will.
For the time being, EngLab Console edition is available for Windows and Linux and Englab GUI is available for Linux only.
Until now EngLab has the following features :
- 16 types of variable declaration (int, float, ...)
- Variable declaration with unlimited number of dimensions.
- Loop structures (for, while, ...)
- Arithmetic, logical and binary operations
- Constant number declaration (pi, phi, ...)
- Graphical manipulation of variable values of any dimension (Englab GUI)
- Adjustable graphical environment (Englab GUI)
- Editor for writing *.eng functions (Englab GUI)
- Command history for the last 5 sessions
- Immediate access to variables, constants and functions (EngLab GUI)
- Recent files opened through EngLab (EngLab GUI)
Toolboxes that have been fully or partially implemented:
- a package containing fundamental functions of C (trigonemetric, hyperbolic trigonometrical, ...)
- a package containing some statistic functions
- a package containing functions that allow convertions of the variable type
All these toolboxes accompany the basic two EngLab editions, since they do not depend on another open-source library. Moreover, some other toolboxes have been partially implemented:
- a package that contains functions for the manipulation of 2-D matrices (determinant, inverse array, ...). This package depends on the open-source library NewMat10.
- a package that contains functions for image processing. This package depends on the open-source library CImg.
- a package that contains functions for image processing. This package depends on the open-source library OpenCV.
Also, we develop
- a toolbox for visual data representation(plots etc)
- a toolbox that contains functins for manipulating polyonymials, root detection, computation of integrals and derivatives, special functions and more.
Those two toolboxes will be available in the next releases.
The disadvantage is the number of EngLab developers, which does not allow EngLab's quick development. Thus, helping us would be welcomed.
You can help us with the following two ways:
- By reporting bugs, which you have observed during EngLab execution. You can report bugs in https://sourceforge.net/tracker/?group_ … tid=997443 . Moreover, you can suggest new features that would improve EngLab's usability and performance. New features can be suggested in https://sourceforge.net/tracker/?group_ … tid=997446 .
- If you would like to get more into EngLab, you can become EngLab developers and help us. That requires C++ knowledge.
If you have read till here, that's a good sign. Wink
You could ask questions in the mailing list [email protected] or in the forum .
EngLab development team :
Bugfest development team :
Serenis Charalampos - PhD student of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).
Tsardoulias Emmanouil - PhD student of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).
Gavves Efstratios - Dipl. Engineer of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).
Parastatidis Nikolas - Postgraduate student of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).
Also contributed:
Gkekas Christos - Dipl. Engineer of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).
Vogianou Thanassis - PhD student of the Department of Electrical and Computer Engineering of Aristotle University of Thessaloniki(Greece).

We are glad to announce that version 0.3 of Englab has been released. The new version contains several bug fixes and improvements in the kernel, a new and advanced GUI based on the Qt toolkit and toolboxes with several functions. Amongst the featured toolboxes are:
- cimgbox, image processing and manipulation toolbox
- plotbox, toolbox for plotting graphs and figures
- dspbox, toolbox for Digital Signal Processing and audio processing
as dynamic (external) toolboxes and:
- analogfilters, toolbox for analog filter design
- unit conversions toolboxes, complex numbers toolbox, polynomials toolbox, stats toolbox etc.
as static (internal) toolboxes.
Englab is available for GNU/Linux, Unix (not tested) and Windows32 platforms.
For GNU/Linux
- Platform-independent
The source tarballs are available at:
http://sourceforge.net/project/showfile … _id=206384
- Debian/Ubuntu (and other Debian-based distributions)
Precompiled deb packages are available for download here:
http://sourceforge.net/project/showfile … _id=292500
or to use our Debian repository, simply add it to your package sources by appending the following lines to /etc/apt/sources.list
deb http://englab.bugfest.net/debian unstable main
deb-src http://englab.bugfest.net/debian unstable main
(Please note that you need to have root permission in order to edit the sources.list file)
- Archlinux
PKGBUILD scripts are available in AUR:
http://aur.archlinux.org/packages.php?O … _Search=Go
or in sourceforge:
http://sourceforge.net/project/showfile … _id=292585
and also precompiled Arch packages exist in our Archlinux repository. In your /etc/pacman.conf add the following lines for the i686 architecture:
[englab]
Server = http://englab.bugfest.net/arch/i686
and for the x86_64 architecture:
[englab]
Server = http://englab.bugfest.net/arch/x86_64
then execute:
# pacman -Syu
to allow pacman to synchronize with the repository and:
# pacman -Ss englab
to see all the available packages.
- Fedora
RPM packages can be downloaded from sourceforge:
http://sourceforge.net/project/showfile … _id=324683
For Windows
Download the zip from sourceforge:
http://sourceforge.net/project/showfile … _id=324502
and unzip it to the directory of your choice.
For possible bugs, feature requests and any comments you may have please send us an e-mail at:
[email protected]
Thank you!

Free/open source plotting software

The objective:
Data processing, mostly one X and one Y axis, recorded from sensors.
Formatting, to change how the chart looks, e.g. fonts of the axis label, weight and dashed lines of the plot, addition of lines or arrows.
What's been found:
Gnumeric and google spreadsheet.
There is a wonder what the Free/open source software users among the research people are using. I ran into LaTeX and thinks it's a good software. Anything like this would be nice.
Thanks.

Fine. I found QtiPlot working really well on Linux systems with ease of availability free of charge. No flame setting (as I think Mac OS and linux are both Unix-like), but it's a bit hard to compile on Mac OS X.

Open source builds on Sol10

All,
I am attempting to compile from source several different open source packages (Sudo, SSH, Apache) on systems running Solaris 10 on both the x86-64 and SPARC platforms.
The prereq. packages from sunfreeware.com are installed (GCC 3.3.1 and GNU Make).
Each attempt to build a source is resulting in the same error:
During the execution of ./configure the following notices appear:
configure: WARNING: signal.h: present but cannot be compiled
configure: WARNING: signal.h: check for missing prerequisite headers?
configure: WARNING: signal.h: see the Autoconf documentation
configure: WARNING: signal.h: section "Present But Cannot Be Compiled"
configure: WARNING: signal.h: proceeding with the preprocessor's result
configure: WARNING: signal.h: in the future, the compiler will take precedence
configure: WARNING: ## ------------------------------------------ ##
configure: WARNING: ## Report this to the AC_PACKAGE_NAME lists. ##
configure: WARNING: ## ------------------------------------------ ##
Then during the execution of make:
In file included from /usr/include/sys/wait.h:24,
from ../include/apr.h:124,
from apr_cpystrn.c:17:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../include/apr.h:124,
from apr_cpystrn.c:17:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../include/apr.h:124,
from apr_cpystrn.c:17:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../include/apr_general.h:33,
from ../include/apr_pools.h:39,
from ../include/apr_strings.h:50,
from apr_cpystrn.c:18:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
Has anyone encountered similar errors while trying to build from source?
Thanks in advance for the information.

All,
After some additional testing I have found that the GCC 3.4.2 complier and GNU Make packages included in the Solaris 10 companion CD work OK.
The build problem was related to the GCC 3.3.2 and GNU Make packages from sunfreeware.com.

Is mysql a free open source database or do you need a license for it in prd

is mysql a free open source database or do you need a license for it in production.

Hi,
It should be free under GPL (General Public license).Usually it will comes with your operating system distribution (eg:RHEL)
If you download it from Oracle site, it should have the commercial license tied to it, and you need to pay for that if it is in use for production.
http://www.mysql.com/about/legal/licensing/index.html
regards,
mrak

Input Sources Crashes System Preferences

I have two issues:
1) When trying to open Input Sources through 'System Preferences >> Keyboard >> Input Sources' I get a pop-up window saying 'System Preferences quit unexpectedly'...
2) Also - and I suspect this is a related issue - my menu bar keeps constantly blinking/flickering so that I am unable to select anything, nor use Spotlight. I have a feeling that Input Sources & Keyboards are causing the Menu Bar to blink/flicker but I can't try disable them due to my first issue
This is a recent issue that started ever since I started exploring a few new apps to customise my keyboard; namely KeyRemap4Macbook and DoubleCommand. I have also been using Ukelele to create custom keyboard layouts but the issues only started after installing DoubleCommand and KeyRemap...
Any help and solutions would be greatly appreciated.
Thank you,
Zano.

Thank you for the swift response.
Update:
Not that it will affect much, but I forgot to mention that I had already uninstalled KeyRemap and DoubleCommand by the time I posted my message.
'Safebooting' didn't work (I had already tried but just tried again now).
Attempting to re-install Mavericks according to the link you gave me returned a message saying "Could not find installation information for this machine..."
I'm gonna try re-installing it using a .dmg file I was given when I had my machine repaired (it's been through a lot!).
Will update again soon.
Thanks,
Z.

Open source surveillance system

Similar Messages

Maybe you are looking for