Open The File in the Server

Hi All,
The macro OPENFILE is working fine for opening the files in the local.
The same macro if used to open the file in the server its not working fine.
I tried both in the following,
evmnu("OPENFILE","link name","HTTP://server name/appsetname/application name/eEXCEL/REPORTS/Report1.xlt")
evmnu("OPENFILE","link name","//server name/appsetname/application name/eEXCEL/REPORTS/Report1.xlt")
both they are not working,
Please let me know, if there is any problem in this or the procedure for accessing the files from the server.
Thanks in Advance..
Regards,
G.Vijaya Kumar.

Here is a working example if u want to open a report that is located in your local folder:
=EVMNU("OPENFILE";"Description";"/REPORTS/WIZARD/template1.xlt")
To open file that is located in a company folder on the root lvl u can use next formula:
=EVMNU("OPENFILE";"Description";"CompanyLVLFile.xlt")
Hope that was helpful,
Dzmitry

Similar Messages

  • Is there a way to open Excell file from the server and display in the UI and save it back on to the

    Hello there,
    Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

    Hi Mike,
    Welcome you to the forum.
    You may try:
    SELECT * FROM MyDBNameHere.dbo.OUSR T0
    Thanks,
    Gordon

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • How to see the file at the application server

    HI TO ALL SDNERS ,
                                 THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
    Program Name        : ZME11_BDC.
    Title               : PURCHASE INFORMATION RECORD LOAD PROGRAM
    Program Objective   : THIS PROGRAM READS IN THE PURCHASE
                          INFORMATION FILE. IT CREATES A BDC SESSION TO
                          USE TO LOAD THE PURCHASE INFORMATION RECORDS
                          INTO SAP using the ME11 Transaction.
    REPORT  ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
                constants declaration
    constants: c_x value 'X',
               c_sess type apqi-groupid value 'zcustomer',
               c_xd01 type tstc-tcode value 'ME11'.
                  DECLARING VARIABLES
    DATA: V_MSG(255),
          V_ERREC TYPE I,"NO OF FAILED RECORDS
          V_LINES."NO OF RECORDS
           FLAG DECLARATIONS
    DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
          FG_SESSION_OPEN VALUE ''.
          STRUCTURES AND INTERNAL TABLE DECLARATIONS
    TYPES :BEGIN OF TY_PIR,
             LIFNR TYPE EINA-LIFNR,
             MATNR TYPE EINA-MATNR,
             EKORG TYPE EINE-EKORG,
             WERKS TYPE EINE-WERKS,
             VERKF TYPE EINA-VERKF,"sales person
             TELF1 TYPE EINA-TELF1,"telephone
             URZLA TYPE EINA-URZLA,"country
             REGIO TYPE EINA-REGIO,"region
             APLFZ(5),"plan deleivery time
             EKGRP TYPE EINE-EKGRP,"purchase group
             NORBM(13),
             NETPR(13),
         END OF TY_PIR.
    DATA : IT_PIR TYPE TABLE OF TY_PIR,
           WA_PIR LIKE LINE OF IT_PIR.
    DATA: BEGIN OF IT_BDCDATA.
    INCLUDE STRUCTURE BDCDATA.
    DATA END OF IT_BDCDATA.
    DATA : BEGIN OF IT_BDCMSG.
    INCLUDE STRUCTURE BDCMSGCOLL.
    DATA END OF IT_BDCMSG.
                      SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : FNAME TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN END OF BLOCK B1.
                           AT SELECTION ON VALUE REQUEST
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
       PROGRAM_NAME        = SYST-CPROG
       DYNPRO_NUMBER       = SYST-DYNNR
       FIELD_NAME          = ' '
    IMPORTING
       FILE_NAME           = FNAME.
                             START OF SELECTION
    START-OF-SELECTION.
    PERFORM F_GET_DATA USING FNAME
                       CHANGING IT_PIR.
    PERFORM F_GENERATE_DATASET USING FNAME
                               CHANGING IT_PIR WA_PIR.
    *&      Form  F_GET_DATA
          text
         -->P_V_FNAME  text
         <--P_IT_PIR  text
    FORM F_GET_DATA  USING    P_FNAME LIKE FNAME
                     CHANGING P_IT_PIR LIKE IT_PIR.
    DATA: LV_FILE TYPE STRING.
    LV_FILE  = FNAME.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = LV_FILE
       FILETYPE                      = 'DAT'
      HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = P_IT_PIR
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF P_IT_PIR IS INITIAL.
    FG_DATA_EXIST = ''.
    ENDIF.
    ENDFORM.                    " F_GET_DATA
    *&      Form  F_GENERATE_DATASET
          text
         -->P_V_FNAME  text
         <--P_IT_PIR  text
    FORM F_GENERATE_DATASET  USING    P_V_FNAME LIKE FNAME
                             CHANGING P_IT_PIR LIKE IT_PIR
                                      P_WA_PIR LIKE WA_PIR.
    MESSAGE I001(ZHNC).
    *OPENING FILE AT THE APPLICATION SERVER FOR WRITING
    OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF SY-SUBRC  EQ 0.
    MESSAGE I002(ZHNC).
    LOOP AT P_IT_PIR INTO P_WA_PIR.
    SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
                               P_WA_PIR-MATNR
                               P_WA_PIR-EKORG
                               P_WA_PIR-WERKS
                               P_WA_PIR-VERKF
                               P_WA_PIR-TELF1
                               P_WA_PIR-URZLA
                               P_WA_PIR-REGIO
                               P_WA_PIR-APLFZ
                               P_WA_PIR-EKGRP
                               P_WA_PIR-NORBM.
    *TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
    MESSAGE I003(ZHNC).
    TRANSFER P_WA_PIR TO FNAME.
    ENDLOOP.
    *CLOSING THE FILE AT THE APPLICATION SERVER
    CLOSE DATASET FNAME.
    ENDIF.

    Hello,
    I made a similar program. You can have a look at it.
    *&      Form  write_to_app_server
          text
    -->  p1        text
    <--  p2        text
    FORM write_to_app_server.
    To get filename
      PERFORM get_filename.
    To write into the application server
      OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
      IF sy-subrc = 0.
        LOOP AT <l_table> INTO <l_line>.
          TRANSFER <l_line> TO g_filename_with_path.
        ENDLOOP.
        CLOSE DATASET g_filename_with_path.
      ELSE.
        CLOSE DATASET g_filename_with_path.
      ENDIF.
    To send mail
      PERFORM send_mail.
    ENDFORM.                    " write_to_app_server
    *&      Form  get_filename
          text
    -->  p1        text
    <--  p2        text
    FORM get_filename.
      DATA : l_log_path TYPE  filepath-pathintern
                          VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
      CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
           EXPORTING
                client                     = sy-mandt
                logical_path               = l_log_path
                operating_system           = sy-opsys
                file_name                  = p_fname
           IMPORTING
                file_name_with_path        = g_filename_with_path
           EXCEPTIONS
                path_not_found             = 1
                missing_parameter          = 2
                operating_system_not_found = 3
                file_system_not_found      = 4
                OTHERS                     = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " get_filename
    You may find it useful.
    Regards,
    Karuna.

  • Validate the file from app. server before uploading

    Hi All,
    I am trying to upload the data from application server into an internal table.
    My requirement is I need to validate the data before I upload the data into internal table.(i.e I open the file from application server using FM Open_Dataset.Now before I upload the data into an internal table,I need to first validate each record in the file).I have some 7-8 lakhs of records in the file.
    Any input for the above requirement would be of great help
    Regards,
    nsp.

    hi Nsp,
      I guess validation of data will be only possible after uploading the data in to an internal table ...
    Regards,
    Santosh

  • Regarding Reading the file from Application Server

    Hi,
    I am trying to read data from Application Server but due to special characters it is getting dumped out.
    US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
    US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
    US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
    US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
    In the last line it is going into dump due to special character ".
    Please suggest.
    Thanks
    Priyanka.

    Hi,
    You can check the mode in which you are reading the file
    from application server that is
    Open Dataset in Binary or Text Mode.
    Hope it helps
    Regards
    Mansi

  • FM to get the file from application server to presenatation server automati

    Hi!
    In my upload program I am egtting the error log file onmy application server directly. Is there a function module or a way that in my abap code I can mention to bring the file or transfer the file to the presentation server . As my program is been run in the back ground so I cannot directly get the file on the presenattion server, so I need to bring it back on teh presentation server back to see teh eror log.
    I would like my program to do the transfer in background itself so that I can see the error log on a daily basis from my local file .
    Thanks
    when 'X'.                      "X is application server
    *         TRANSLATE p_err USING '\/'." correct slash for unix
          open dataset p_err2 for output in text mode encoding default.
          if sy-subrc = 0.
            loop at t_err into s_nts.
              transfer s_nts to p_err2.
              if sy-subrc ne 0.
                message i010(ad) with p_err2 'Download Failed'.
              endif.
            endloop.
            close dataset p_err2.
          else.
                message i010(ad) with p_err 'dataset could not be found'.
            sy-subrc = -1.             "Maintain error condition
          endif.
    *        endif.
          when ' '.                      "Blank is presenation server
            translate p_err using '/\'."correct slash Dos file
            call function 'DOWNLOAD'
              EXPORTING
                filename = p_err
                filetype = 'ASC'   "FTYPE set to DAT in DATA seg
              TABLES
                data_tab = t_err.
            if sy-subrc ne 0.
              message i010(ad) with 'File ' p_err 'cannot be located.'.
              sy-subrc = -1.             "Maintain error condition
              exit.
            endif.
        endcase.
      ENDIF.
    Thanks

    SO , after reading all , I assume that there is no way in which when I run the background job and get a errro file on application server can be retrievd on my presenattion serevr during the background job run. I was thinking that theer might be a functionn module which will convert the application server file into presenttion server file during the program run in background and store it in the location provided.
    I was trying to use FM  CALL FUNCTION 'C13Z_APPL_TO_FRONT_END' and  CALL FUNCTION 'ARCHIVFILE_SERVER_TO_SERVER' but using teh first one asks for source file and destination file name during teh program run and as it runs in background it cannot be provided again and again and teh second one dosent seem to work.
    Thanks

  • How to open a file in the correct characterset

    Apex 3.1 running on OracleXe
    I have a file which I open using an onlaod before header process (similar to the way excel files are opened).
    I set the Mime Type in the header process on an apex page
    OWA_UTIL.mime_header ('Application/Octet', FALSE);
    -- Set the name of the file
    htp.p('Content-Disposition: attachment; filename="'||:P12_FILENAME||'"');
    -- Close the HTTP Header
    owa_util.http_header_close;and then generate a query via a stored procedure which I write out using the following routine
    (It is done this way as the file needs to be written to the client machine rather than the database server).
    Procedure Dump_Query_To_File(P_Query                In Varchar2,
                                 P_Display_Titles       In Varchar2 Default 'N')
    IS
        l_output utl_file.file_type;
        L_Thecursor Integer Default Dbms_Sql.Open_Cursor;
        L_Columnvalue Varchar2(4000);
        L_Status Integer;
        l_query VARCHAR2(4000) := p_query;
        L_Colcnt Number        := 0;
        L_Separator Varchar2(1) := '';
        L_Desctbl Dbms_Sql.Desc_Tab;
    begin
        Dbms_Sql.Parse(L_Thecursor,   L_Query,   Dbms_Sql.Native);
        dbms_sql.describe_columns(l_thecursor,   l_colcnt,   l_desctbl);
        For I In 1 .. L_Colcnt
        Loop
            If P_Display_Titles ='Y'
            Then
                If I < L_Colcnt
                Then
                    Htp.Prn(L_Separator || '"' || L_Desctbl(I).Col_Name || '"');
                    L_Separator := ';';
                Elsif I = L_Colcnt
                Then
                    Htp.Prn(L_Separator || '"' || L_Desctbl(I).Col_Name || '"');
                    htp.ps(chr(13));
                End If;
            END IF;
            Dbms_Sql.Define_Column(L_Thecursor,   I,   L_Columnvalue,   4000);
        End Loop;
        L_Status := Dbms_Sql.Execute(L_Thecursor);
        WHILE(dbms_sql.fetch_rows(l_thecursor) > 0)
        LOOP
          l_separator := '';
          FOR i IN 1 .. l_colcnt
          Loop
              Dbms_Sql.Column_Value(L_Thecursor,   I,   L_Columnvalue);
              If I <= L_Colcnt
              then
                  Htp.Prn(L_Separator || L_Columnvalue);
                  L_Separator := ';';
              end if;
          End Loop;
          htp.ps(chr(13));
        End Loop;
       dbms_sql.close_cursor(l_thecursor);
    End Dump_Query_To_File;When I vew the file in notepad I can see a string Annulé
    but when I open it in wordpad this gets converted to Annulé.
    Ideally what I need to do is open the file using characterset WE8MSWIN1252
    and write to the file using the same characterset.
    My database is in AL32UTF8 (ie XE universal Edition).
    So far the information I have is that owa_util only accepts charactersets when the mime type is of type text.
    This however still results in the file being written with the incorrect characterset.
    Edited by: Keith Jamieson on Oct 27, 2010 12:16 PM

    Small update.
    I created a database with a western european characterset We8MSWIn1252
    If I use utl_file to write out the code on the database server it gets produced correctly in Ascii format with the accented charcacters.
    As soon as I try and write out the code using owa_util.Mime_header and htp.p the code is written in UTF8 format.
    I did try and write out the header specifying a western european characterset but it seems that if it encounters an accented character it automatically switches to utf-8 mode. If there are no accented charcters the file is produced in ascii format.
    Really stumped on this one.

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Append data into the file in application server

    Hi Friends,
    I have an issue where i have a job which has three different stepst for same program. If i run the job the program will create a file in the application server and append the other two steps in the same file without overwriting the file or creating a new file.
    My problem is like its creating three different files in application server for that particular job since it has three steps . Its not appending into one particular file .
    I am using the FM 'Z_INTERFACE_FILE_WRITE' where i have used the pi_append in the exportng parameter . ITs working when i specify the file in local system. It is appending correctly when i run the report normally to apppend into local system.
    But when i schedule a job to append the file in application server its creating three different files.
    Kindly help me if anyone is aware of this issue
    Thanks in advance
    Kishore

    Hi,
    Please use open dataset to write and append files.Please check the logic of Z FM which you are using .
    To open and write into a file  use
    OPEN DATASET FNAME FOR OUTPUT.
    To append data into existing file use
    OPEN DATASET FNAME FOR APPENDING.
    To write into file:
    v_file = file path on application server
      OPEN DATASET v_file FOR output.
      IF sy-subrc NE 0.
    write:/ 'error opening file'.
      ELSE.
       TRANSFER data TO v_file.
      ENDIF.
    CLOSE DATASET v_file.
    For appending :
    OPEN DATASET v_file fOR APPENDING.(file is opened for appending data  position is set to the end of the file).
    Thanks and Regards,
    P.Bharadwaj

  • Need a pipe delimiter after every field in the file on application server

    Hi ,
    i have to transport data in internal table to a file on application server.
    I have done this successfully. But the problem is i have to put a pipe
    delimiter after every field in the file on application server.
    Could yoe plz help in  this issue.
    Thanks & Regards
    Suresh kumar D

    Hi Should,
              I think the below code should solve your problem as i also had  a similar type of requirement and this was the code i had used in my program.
      FIELD-SYMBOLS: <FS> TYPE ANY.
      DATA: L_FLINE TYPE STRING.
    Open file for output
      M_CHECK_SELSCR_FNMS O1 O.
      LOOP AT I_TARGET.
    Write records to file
        DO.
          ASSIGN COMPONENT SY-INDEX OF STRUCTURE I_TARGET TO <FS>.
          IF SY-SUBRC EQ 0.
            IF SY-INDEX EQ 1.
              MOVE <FS> TO L_FLINE.
            ELSEIF <FS> NE C_PIPE.
              CONCATENATE L_FLINE C_PIPE <FS> INTO L_FLINE.
            ELSE.
              CONCATENATE L_FLINE <FS> INTO L_FLINE.
            ENDIF.
          ELSE.
            TRANSFER L_FLINE TO W_SRVR_NM_O_O1.
            EXIT.
          ENDIF.
        ENDDO.
      ENDLOOP.
    Close file
      CLOSE DATASET W_SRVR_NM_O_O1.
      IF SY-SUBRC EQ 0.
        MESSAGE S208(00) WITH TEXT-M02.
      ENDIF.
    Regards
    Sikha

  • Where can I find the file where the static mapping allocations of the DHCP server are stored?

    In our company we are using DHCP to assign static ip addresses to our clients.
    Now we are forced to change the ip address range. To prevent changing each allocation
    of mac-address to ip-address manually with the admin tool i would like to change the allocation
    in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
    the allocations.
    So how is the file named and where can I find the file where
    the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
    Must i note anything when i change the file manually?

    From man bootpd:
    BOOTP/DHCP STATIC BINDINGS
         Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory.  Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
         See bootptab(5) for more information about the /etc/bootptab file.
         For Open Directory, bootpd looks at the /Computers records for the following properties:
    /etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager.

  • How to give the reference to the path  to copy the file to the server?

    hi all
    i am developing a page in jsp , in which i will open tiff image or autocad drawing,
    i get a file from one CMS, through JSP i login into CMS and get the file reference, till that i am successfull.
    but after that to open a file i have to copy that file into local pc or to the server(where my jsp page runs) and then try to open it.
    could any one know how to give the reference to the path if i have to copy the file to the server or my Local PC from CMS.
    Regards
    Oersla Afroze Ahmed

    hi Deepu,
    Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
    Regards,
    Santosh

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • Error while uploading the file from Allpcation server in LSMW-7th step

    Hi Experts,
    what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
    Thanks in advance,
    KSR

    Hi
    I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
    Is there any specific CODE PAGE to be maintained...
    Thanks in advance
    Oarsk

Maybe you are looking for