Open workbook automatically from the server

Hello
Can somebody tell me how to open BEx workbook automatically from the server?
Thanks

when u say server what is the intention
u wish to open bex from website where it can be published
do u want to open workbook from rsa1 when u loginto bw
u want to open workbook from analyzer
rrmx

Similar Messages

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Cant open doc files from the server on MacBook Air after upgrading to Maverick

Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

MS Project Professional 2010 - Unable to open Project Plan from the Server.

Dear Folks,
Since morning we have been facing an issue with MS Project Professional 2010. When we try to open project plan, it takes time and then show nothing on the screen, project gets checked out to you as well but nothing comes on MS Project Professional Screen.
Strange thing, when busy mouse cursor gets released MS Project Professional show "Disconnected from the Server" message with white icon instead of globe one at the bottom of MS Project Professional and disappear after few seconds.
We are able to open small plans but the plans having 4000 lines is not able to open, Project Professional show busy status when we give it a try.
Everything seems fine to me .. Project Server connection .. queue jobs .. no issues.
What could be the possible problem and how to resolve this issue?
Many thanks in advance.
Best Regards

Hi Mohsin,
Is it happening for all users or just some of them? Is it happening for all projects? Have you tried on a different machine?
First I'd suggest to try accessing the project plan through PWA to identify wheither it is a network issue or an application issue.
Then check the Project Pro account to ensure that the connection settings to Project Server are correct. You could also try to remove the Project Server account in Project Pro and create it again.
Finally, ensure that the PWA URL is added to IE trusted sites.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How can open a html, pdf files from the server (c:\foldername\filename)

Hi all,
I am developing an application. in this app i have to implement RMI.
My problem is this, How can a client open a files from the server.
all the html, pdf files are stored in the server's directory like C:\audit\filename.
There is a folder on the server's C directory which contains all the html , pdf files.
please tell me how can a client open a file from the server using RMI.
Please send me the solution as soon as possible.
Thanks & Regards
Bhavishya

That's doing it the hard way. Why not use HTTP or FTP?

The dialog box open twice when open file from the server

I use the following code to download/open file from the server:
<%
String filename = "MengxianhuiDocTest.doc";
String filepath = "D:\\";
response.setContentType("APPLICATION/OCTET-STREAM");
response.setHeader("Content-Disposition",
??attachment; filename=\"" + filename + "\"");
java.io.FileInputStream fileInputStream =
new java.io.FileInputStream(filepath + filename);
int i;
while ((i=fileInputStream.read()) != -1) {
out.write(i);
fileInputStream.close();
out.close();
%>
If the application runs, the Open or Save dialog box display.When I select open the file,
the dialog box will display twice.
Pls help me.
Thanks.

thx
but I tried it and it did't work.
The dialog box also display twice.

What do I need to open a connection from the Linux box to the Oracle server

Hi all,
I want to access oracle database from java application running on Linux.
The database is installed on a Window 2000 machine. What do I need to install before I can open a connection from the Linux box to the Oracle server on Windows 2000 ?
Do I need Oracle Client ?
Thanks,
Quoi

Hi Quoi,
http://myjdbc.tripod.com/basic/jdbcurl.html
Talks abt how to write a jdbc url and the jar + config required to connect to db. Also has a sample program to connect.
Regards
Elango.

If I open an e-mail on ipad, it disappears from the server

I have an iPad2 and an iMac. If I open an e-mail on th iMac, I can still see it later on the iPad, but if I open it first on the iPad, it is deleted from the server and I cannot read it on my iMac.
I have an IMAP account on both with gmail. I have tried to change the setting so that it doesn't delete on the server, but that is only possible with a POP account, it seems.
Appreciate any help!

Do you not close a tab after using it? If you close them, they can't accumulate.
I haven't seen any change in TB3.1 in the way tabs work here.
Older versions are available here:
https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
Choose your version, then your OS (win32 in your case) then your locale (en-us I would think). Finally, when presented with something like ''Thunderbird Setup 24.6.0.exe'', right-click it and choose "save link as", then after it has downloaded, double-click the downloaded file to run it and install Thunderbird.
You don't need to uninstall your newer version. Some add-ons may require help to locate their previous versions, compatible with what you've downloaded and installed; Lightning in particular comes to mind.

Previewing images in forms 11g from the server

Hi All,
i need your help in this issue please
i've just migrated my application from forms 6i to forms 11g
there is a function in my application that i used that previewed images that exists on a network drive that are used in an image gallary
now i don't have this setup as the application is hosted on the weblogic server
i want an alternative method that i can use to preview the images from the server
the old way was:
read_image_file('.\default_image.jpg','any','preview.image_preview'); --this shows a default image if no image was selected
if :search_results.file_path is not null then
     read_image_file(:preview.image_path||'\'||:search_results.file_path,'any','preview.image_preview');     -- this shows the image that we retreived it's name from the database but it exists on the file system
end if;
i've configured the webutil but i don't know what method to use
also another functionality that i lost in the migration is opening a browser window to preview the final article that the editor entered using my application
the old way was:
declare
     url varchar2(1000);
begin
     url:='http://10.100.100.197:55/allcontent/allcontentimages/'||:SEARCH_RESULTS.FILE_PATH||'';
WIN_API_SHELL.WinExec('"C:\Program Files\Internet Explorer\IEXPLORE.EXE" '||url||'',
WIN_API.SW_SHOWMAXIMIZED,TRUE);
Exception when NO_DATA_FOUND then
MESSAGE('CAN NOT FIND THE FILE');
end;
now ithe WIN_API_SHELL is not working as i'm on the server side and i don't know the alternative
please advice

Hello Nivin
If you want to read an file from local drive or from netwrok drive then before reading images please make sure that do you have full rights and have you mapped that network drive .
after that you use read_image_file built in(). secondly you configure WEBUTIL package.
please visit the following link for configuring webutil.
I configured my webutil package from this link and its worked fine.
http://www.baigzeeshan.com/2010/01/open-file-dailog-box-example-using.html
thanks
G.Yassen

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

Unable to access gif files from the server

hi all,
i have successfully signed an applet and it is loading in the client system also. in that applet, i instantiated a jbutton as given below:
JButton jb = new JButton(new ImageIcon("http://192.168.91.154:8080/success/set.gif"));
but the icon din appear and a blank button appears, even when accessed from the server system.
if i give the exact path like c:/blazix/webfiles/success/ set.gif, the icon is coming in the server system but not in other systems. i tried without port no also but in vain. pl solve my problem. what i need is how to
specify the path of the file[any file] which is present in server.
or if i put all the gif files in the jar file, can i access the gif files present in the jar file [set for archive] ? if i can, give me the soln for accessing the gif file present in the jar file, so that i need not access the server to get the gif files.(i.e) how to specify the path of the gif files present in the jar file?
i ve one more doubt. the jni library file shld be in the server, and the client has to access the library in the server. i think the applet loaded in the client ll search for the library in the local m/c only . how to make the applet to search for library in the server??
i feel only by using rmi we can solve this problem. am i correct? if so i feel that an appln or applet running in the server shld access the jni library, and the applet in the client side should communicate with this server appln using rmi to get the data.is it correct? is there
anyother way?
i appreciate your help in this regard. thanks in advance. bye, padmanbhan.

Better information on what you are doing with JNI might help you get an answer.
If you have some server process that needs to use JNI, then I would code a servlet to call, instead of using RMI to ge there.
Depending on your environment, and the target audiences environment, RMI may just cause you a lot of grief. Firewalls etc, get in the way of RMI connections and force security holes to be opened in order to work.
If you use a servlet, then traffic to your server process is done via standard http calls, which will already be enabled, because your app runs in a browser.
If ther data requirements are heavy duty, your server could always send an XML stream to the client, which would allow you to describe complex data to the client.
Running JNI stuff from the client directly means a lot of local infrastructure to run your app. The code you want to run, the JNI library ....
If what you have is really an application, but want the convenience of starting it from a browser, look at Java WebStart. Then you can distribute an application via the browser, and WebStart will worry about the deployment issues for you.
In Summary:
Stay away from RMI from applets if you can help it.
If you really have an App, then try WebStart to manage the distribution issues for you.

Auto Installation of a Print Driver from the Server?

Hi all,
I hope this is the correct forum for this question. I am fairly new at setting up Mac Servers and was looking for some advice. I am trying to set up a Mac 10.6 Server as a print server. I am familiar with setting up printing services on W2k3 servers, but have some questions about this on a Mac server. On a Windows server, once I have installed the printer with the correct driver and shared it out, users just need to connect to the server's print queue and the correct driver is automatically downloaded from the server and installed on the workstation. On the Mac server, it seems that even after I have set up the print queue and installed the needed driver, when I connect a Mac workstation to the queue, it automatically tries to use the Generic Postscript Driver. I then have to manually download and install the needed driver for the printer. Is there any way to get the Mac workstations to automatically download and install the driver from the server, or do I have to pre-load the needed driver on each Mac that will be using the shared printer?

tmcbride wrote:
Hi all,
I hope this is the correct forum for this question. I am fairly new at setting up Mac Servers and was looking for some advice. I am trying to set up a Mac 10.6 Server as a print server. I am familiar with setting up printing services on W2k3 servers, but have some questions about this on a Mac server. On a Windows server, once I have installed the printer with the correct driver and shared it out, users just need to connect to the server's print queue and the correct driver is automatically downloaded from the server and installed on the workstation. On the Mac server, it seems that even after I have set up the print queue and installed the needed driver, when I connect a Mac workstation to the queue, it automatically tries to use the Generic Postscript Driver. I then have to manually download and install the needed driver for the printer. Is there any way to get the Mac workstations to automatically download and install the driver from the server, or do I have to pre-load the needed driver on each Mac that will be using the shared printer?
A Mac Server can distribute Windows print drivers (along with settings) to Windows clients. It does it exactly the same way as Linux Samba servers and (older) Windows servers. This is done by creating a special hidden share point (using SMB), it is special in that it uses the name print$ the drivers and settings are then loaded (from a Windows PC) in to this share, and subsequent PCs can then automatically download them.
See http://www.techrepublic.com/article/techrepublic-tutorial-automate-desktop-print er-setup-with-samba/1053286 for some more information on how to do this.
Note: My past experience has seen the associated .tdb databases for this function stored on this share often get corrupted meaning one had to re-upload (from a Windows PC) the drivers again. Also despite the automatic distribution of drivers and settings being something Windows has done for decades, Apple are still very poor at this in terms of the equivalent Mac (server) to Mac (client). Finally, I have not seen (yet) whether this approach is possible with Windows 7 clients.

How to download a text file from the server

hi everyone,
can anyone tell me how to download and read a text file from the server and saved in into resource folder.
with regards
pallavi

its really easy
To read from server, use something like:
HttpConnection connector = null;
InputStream inp_stream = null;
OutputStream out_stream = null;
void CloseConnection()
     if(inp_stream!=null)inp_stream.close();
     inp_stream=null;
     if(out_stream!=null)out_stream.close();
     out_stream=null;
     connector.close();
     connector = null;
public void getResponse(String URL,String params)
try
     if(connector==null)connector = (HttpConnection)Connector.open(URL);//URL of your text file / php script
     connector.setRequestMethod(HttpConnection.POST);
     connector.setRequestProperty("User-Agent","Profile/MIDP-2.0 Configuration/CLDC-1.1");
     connector.setRequestProperty("content-type", "application/x-www-form-urlencoded");
     //connector.setRequestProperty("charset","windows-1251");
     //*** If you need to send ("arg1=value&arg2=value") arguments to script use this:
     out_stream = connector.openOutputStream();
     byte postmsg[] = params.getBytes();
     out_stream.write(postmsg);
     int rc = connector.getResponseCode();//in any case here connection will be opened & closed
     if (rc != HttpConnection.HTTP_OK)
          CloseConnection();
          throw new IOException("HTTP response code: " + rc);
     inp_stream = connector.openInputStream();
     int pack_len = inp_stream.available();
     byte answ[]=new byte[pack_len];
     inp_stream.read(answ);
     CloseConnection();
     ProcAnswer(answ);//process received data
catch(Exception ex)
     System.err.println("ERROR IN getResponse(): "+ex);
} And you can read from resource file like
public void loadFile(String filename)
    DataInputStream dis = new DataInputStream(getClass().getResourceAsStream("/"+filename));
    String str="";
    try
         while (true)
            ch = dis.read();//read character
            if(ch=='\r')continue;//if file made in windows
            if(ch=='\n' || ch==-1)//end of line or end of file
                if(str.length()==0)continue;//if empty line
                //do some thing with "str"
                if(ch==-1)break;//it was last line
                str="";//next line
                continue;
             str+=(char)ch;
       dis.close();
   catch (Exception e)
       System.err.println("ERROR in loadFile() " + e);
}Welcome! =)
Edited by: MorskoyZmey on Aug 14, 2008 3:40 AM

Desinger Workflow 2010: Unable to load workflow actions from the server. Please contact your server administrator?

Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i N

Hi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010

How do I get Mail to download mail and delete it from the server?

I don't think Mail is downloading my E-mail from my server to my computer.
My main e-mail account is set up as a POP mail account and I have it set to: "remove a copy from server after receiving message: right away"
I have a couple of years of e-mail on my computer and it was getting slower and slower to access many of e-mails. I checked the e-mail account on the server and the file size was huge. I browsed the file and there was a ton of old e-mails in my mail file. I figured this is what was making it really slow to access my e-mails. So I went the the setting in Mail under the advanced tab that says: Remove Now. I clicked it and it took a long long time but then my mail file on the server was emptied. But when I went to access the message in the Mail program I would get this message in italics in the body of the e-mail:
The message from Kathleen <[email protected]> concerning “Re: Tivo” has not been downloaded from the server. You need to take this account online in order to download it."
I was online and all my e-mail messages had this exact message (with the name and subject different). Why is that. I thought POP meant it was suppose to download to my computer?

Verify/repair your disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there's enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it's running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
BTW, you haven't answered which mailbox has the problem. I could be that just rebuilding that mailbox fixes it -- you should verify/repair the disk and make a backup copy of the Mail folder first, nevertheless, though.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

Open workbook automatically from the server

Similar Messages

Maybe you are looking for