Opening a composite form in SV

Hi, to all! :) I do not see any composite forms in Excel SmartView. Could anyone hint me on how to fix it? Thanx so much in advance! ^)

Hi, Hemanth! :) Thanx so much for replying! I am using version 9.3.1.2.0 and I am connected to http://<server_name>:8300/HyperionPlanning/SmartView. It has not worked since the very beginning and I have nearly begun believing that it is the standard limitation of SmartView but since nobody has confirmed it yet I guess I am having a bug/ I would be very grateful for any help! :)

Similar Messages

Opening composite form from workspace in SmartView (global dimensions prob)

There is a composite form consists of 2 sections, 1 form in the upper and 3 in the lower part, 3 global dimensions, 1 section dimension for lower section. If i change some global dimensions a form itself is changed properly, all simple forms change their point of view (pages dimension), but when i open this form using "Open in SmartView" feature from Hyperion interface changes of global dimensions are not applied to simple form EXCEPT upper form and active form in lower section. I'd like to note that changes of section dimension are applied properly for all simple form of whole section.
Also when i'm trying to change some page dimension in opened form in smartview my excel simply crashes
Could anybody share an advice how to fix it or if it is fixable at least?

Dimensions in composite forms are global, in simple form they all are the same, so global dimensions are set properly. The problem is exactly in opening composite form FROM Web-interface HP into SmartView, for example if global dimension is set to October, and i open this in SmartView i would see October only on form, which were active at the moment of opening.
For example, 1 form upper setion, 3 froms lower section, ilvl0Descendnats(YearTotal) is global, i open form in web-interface, switch to 2nd form in lower section and change point of view to October, open in SmartView, 4 sheets are opened in excel, october would be set properly on a sheet with form from upper section and 2nd form from lower section, two other form from lower section would be have January set. Hope it's clear now.
The trouble is not in form settings but in "Open in SmartView" feature

"Open Interface Invoices" Form takes time to open!

Hi Guys,
In our production system, it takes 3 minutes to open "Open Interface Invoices" form (AP Manager>Invoices>Entry>Open Interface Invoices). So what should we do so as to avoid this.
I was thinking to delete data from two tables (AP_INVOICES_INTERFACE & AP_INVOICE_LINES_INTERFACE) based on certain crieterions. Like all the records which have been successfully imported i.e. with status='PROCESSED' can be deleted. So, I can achieve this using two methods:
1. Manually using SQL Delete statement. i.e.
DELETE FROM AP_INVOICES_INTERFACE WHERE status='PROCESSED';
DELETE FROM AP_INVOICE_LINES_INTERFACE
WHERE invoice_id IN (SELECT invoice_id FROM AP_INVOICES_INTERFACE WHERE status='PROCESSED');
2. Or I can use "Payables Open Interface Purge" Program.
I ran this program for my specific source, and checked the count from tables but the result is the same. This means this program has not deleted any of the processed records from these two tables for the particular source.
What can be the reason for this? Please suggest me on this.
Thanks a lot!
Regards,
Sumir Chawla

So I tested it out on Windows Pro Reader X 3GB and it opened right away. Then I put it down to 1GB and it took over a minute! Best bet is to get a faster machine! (or at least a memory upgrade)
In the mean time, I had a look at your form and there were a lot of objects and subforms that didn't need to be there, so I cleaned it up and made one repeatable subform. It works a lot faster now even on a 1GB.
You can edit the title of each entry in the scripting object myLists.
Here you go:
http://www.fieldeffecttechnologies.com/AdobeForums/PAR_v3.pdf
Kyle

Error while opening a standard form in apps11i

while opening a po form POXPOEPO thru form builder, error is showing that some objects are unable to load.
how to rectify that can someone help it out

Have a look at this Re: URGENT: Forms 6i error

Getting Error While Opening the Oracle Form 6i in 10g

Hi All ,
FRM-10102: Cannot attach PL/SQL library XXX. This library attachment will be lost if the module is saved.
I am getting above error message while opening Oracle 6i Form in 10g.
I get the following Alert message when I try to attach the library to my form -
Attached library name
S:\.........xxx.pll contains non-portable directory specification. Remove path? Yes/No?
If I select 'No', the Form compiles and runs without any error.
But if I select 'Yes', I get the following error message:
FRM-40039: Cannot attach library xxx while opening form.
All files (fmb, fmx, pll, plx) are on the same path. I detached and then re-attached the library but this didn't work for me?
Help Appreciated.
Thanks & Regards,
Ram.

use the shiped batch program frmplsqlconv.bat to convert all your forms/librarys from Forms 6i to 10g.
you can call it in wizard mode from the start menu (e.g. OracleDeveloperSuite <OraHome> => Forms Developer => Forms Migration Assistant (GUI Mode) and follow the instructions step by step
or you can call it by batch to convert all your forms/librarys. The batch file is found in
<ORA10g_HOME>BIN\frmplsqlconv.bat
=>
frmplsqlconv.bat <formname>

Can not open PLLs on Forms Builder 10g

Hi Folks,
everytime I try to open an existing PLL-File via the Forms Builder FileOpen-Dialog I have got the message
    PDE-PLI018 Couln not find library
    Drive:\Path\LibName.pll
Pressing the OK-Button returns to the FileOpen-Dialog. The selected FileType in the Dialog take effect to the filelist but nothing else.
Note that the file exists and I select it from the Filelist!
About Forms Window shows the following:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE     10.1.0.4.0     Production
While converting from 6i to 10g it is unavoidable to convert forms and libraries, so please help me!
PS: I can recompile forms with attached libraries if the PLX-Files (6i) are available, but the forms will not work with these PLX-Files.
edited by ths:
I tried to generate a new library. This works fine until I saved it. After naming the library and pressing the save button in the dialog the pll file was created and the same error message appears.
I closed form builder and tried to reopen the library: same error.
I generated another new library and save this by selecting the first new I generated. Jippee! I get the message that the file already exists! I selected "overwrite" and the file was overwritten. After that the same error appears.
How can I (re)open PLL files? It is no solution to generate a new library overwriting the old one everytime some changes should made.
Trying to build the library (Ctrl+T) produces another error:
    FRM-91507: Internal Error: Unable to generate library.
Compiling (Ctrl-Shift-K) works fine.

Hi Mark,
there's no user except of me on the pc and server (I'm working via rdp-client on a virtual server), no server and no oc4j task or instance started. The one and only program that runs is forms builder. The error occurs if I just try to open a pll file via the file open dialog of forms builder.
With my admins we found that forms builder creates a (temporary) file (e.g. s22o without extension with 827392 bytes) in c:\ but only if I'm the actual user. After I'm getting the permission to create and update files on c:\ forms builder was able to open pll files. Now we're trying to find out why this accurs only on my login. With other users we tried these file was created on F:\ which is the personal drive of the user. I'm only wondering about the fact that temporary files were not created in the TEMP folder defined by the TMP or TEMP environment variable.
So we solved this unusual problem in an unusual way.

Unable to open java custom form in R12 instance

Dear friends,
I am unable to open java custom form from front end.
Navigation as follows:
SYSTEM ADMINISTRATOR --> UM_SHIPPING --> ORDERS LOOKUP.
Can anyone please look into the issue please.
The error as follows:
Error page
you have encountered an unexpected error. please contact the system administrator for assistance.
Thanks,

I am unable to open java custom form from front end.
Navigation as follows:
SYSTEM ADMINISTRATOR --> UM_SHIPPING --> ORDERS LOOKUP.Was this working before? If yes, any changes been done recently?
Did you follow the steps in (What Setup is Required to Create Custom JSP Pages to Run on the Ebusiness Suite 11i and R12+? [ID 884200.1])?
Can anyone please look into the issue please.
The error as follows:
Error page
you have encountered an unexpected error. please contact the system administrator for assistance.Please check Apache log files for details about the error. Please also check if any errors are reported in the database log file.
Thanks,
Hussein

Right/best method to open and close form?

When i click a button from FormA, it open FormC and it should be the same with button from FormB-used to open the same FormC but it doesn't.
this happen when i previously open FormC from FormA before opening it in FormB.
I use setvisible(true) to open form and setvisible(false) to close the form and this doesn't seem right..
i use exactly the same method as shown in Creating Swing Clients for Business Components Tutorial
anyone can help? i'm new with Java n Jdeveloper...
Thank You..

Fatima,
this question is best answered in teh JDeveloper forum on OTN because this Forum is for Oracle Forms. You can start and hide forms in Java using setVisible(true|false), howvere, this doesn't release the hanlde to the data bound.
In the HowTo setcion of the otn.oracle.com/products/jdev there exist a document "How Do I dynamically Change the Binding of a View Object to JClient Panel?"
This explains how you work with RowSet Iterators to reuse forms.
Frank

How to open a entity form in a new window using openEntityForm() method.

How to open a entity form in a new window using openEntityForm() method.

As far as I'm aware, there isn't a supported way to do this in the client-side API. You could use window.open instead
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

Urgent: Problem opening a data form that uses a smart list

Hi, we've got a problem with a data form that is quite unusual.
The data form was working perfectly until yesterday when we put a smart list in it. The smart list is composed of 8 possible choices activated by the following member formula:
IF (SML==1)
((BDG->BegBalance->&CurrYear)/12);
ELSEIF (SML==2)
((INC_BDG->BegBalance)*("01A2"->ACT_FINAL));
ELSEIF (SML==3)
ACT_FINAL->&PreYear;
ELSEIF (SML==4)
(INC_ACT->&PreYear)*("01A2"->ACT_FINAL);
ELSEIF (SML==5)
ACT_FINAL;
ELSEIF (SML==7)
(INP_PER)*("01A2"->ACT_FINAL);
ELSEIF (SML==8)
INP_ASS;
endif;
Initially we tested the functioning of every different choice in the smart list and it was working properly. After a while we tried again to change the choices combination and we couldn't open the data form due to an error.
It is quite strange because sometimes it work and sometimes it doesn't. In the data form (that is very large) there are many accounts and scenarios that are dynamic calc, in addition to the smart list formula; we tried to open the form two minutes ago converting the data storage type of a scenario from "Dynamic calc" into "Dynamic calc and Store", and it seems to work at the moment... does planning have a memory limit? Can someone suggest a solution (or help us find out the reason)?
Bye

Anton,
new thread is one possibility, but the messsage box is not win message box, but SAP form, so I think you can clcik there without new thread too.
Check this thread, hope it helps
Re: Confirmation Dialog in my way

Error in opening the adobe form to create a PCR

Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b>

Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b>

Error while opening the ADOBE FORM via mail

Hi to all,
I have created a program to attached ADOBE FORM to mail.
When I execute the program, it sends ADOBE FORM to my mail ID successfully.
But when I open my mail and try to open attached ADOBE FORM, it gives error
ADOBE READER COULD NOT OPEN u2018PDF FORM (1). PDFu2019 because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attached and wasnu2019t correctly decoded).
Please can any tell me, what the problem is and what the solution is for that?
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 1, 2011 2:22 PM

Thanks for reply,
below is the code.
data:
l_fm_name         TYPE rs38l_fnam,
   l_formname   TYPE fpname VALUE 'ZTESTF1' ,
fp_docparams      TYPE sfpdocparams,
FP_FORMOUTPUT     TYPE FPFORMOUTPUT,
fp_outputparams   TYPE sfpoutputparams.
data: I_ATT_CONTENT_HEX type SOLIX_TAB.
START-OF-SELECTION.
data: st TYPE ZTABFM11.
data: it type table of sflight.
data: wa like LINE OF it.
data: wa_st like LINE OF ST.
fp_docparams-langu   =      'E'.
fp_docparams-country =      'US'.
fp_docparams-fillable =      'X'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview =   'X'.
fp_outputparams-device   = 'LP01'.
fp_outputparams-getpdf =   'X' .
fp_outputparams-dest   =    'LP01'.
fp_outputparams-reqimm =   'X'.
fp_outputparams-reqdel =   'X' .
fp_outputparams-xfpoutdev = 'LP01'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = l_formname
    IMPORTING
      e_funcname = l_fm_name.
E_INTERFACE_TYPE           =
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
select * from sflight into TABLE it.
loop at it into wa.
    wa_st-CARRID = wa-CARRID.
    wa_st-CONNID = wa-CONNID.
    wa_st-FLDATE = wa-FLDATE .
    wa_st-PLANETYPE   = wa-PLANETYPE.
    append wa_st to st.
    endloop.
CALL FUNCTION l_fm_name
    EXPORTING
      /1bcdwb/docparams = fp_docparams
          st               = st
    IMPORTING
      /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4
   CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
    E_RESULT             = result
   EXCEPTIONS
     usage_error          = 1
     system_error         = 2
     internal_error       = 3
     OTHERS               = 4
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE       = ' '
IMPORTING
OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_ATT_CONTENT_HEX .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Fill the details.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'flight details' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'flight details'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
      I_ATT_CONTENT_HEX = I_ATT_CONTENT_HEX ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'mail id '.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'Form sucessfuly send to person' type 'I'.
plesase can any one, provide the soultion.
i shall be thankful toy you for this.
regards
pavneet rana

"Access Denied" pop up error while opening adobe online form in IE8.

"Access Denied" pop up error while opening adobe online form in IE8. I use crosslink to connect to client network and then open IE with App Tunnel. Tried to re-install Acrobat reader multiple times but issue still persist. Even tried to change the PDF properties (Edit-> Preference- General/Internet/Security Enhanced)

Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input.

2010 Review Approval Workflow Error - Outlook cannot open a new form

Hi,
I set up an Approval - SharePoint workflow on a document library list in a webpart. When the approver got the email and tried to approve from outlook, she received the following error. She has approved documets in the past for the same page.
Can anyome please help me troubleshoot this? So much appreciated!
Word Error:
Could not open. http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 2010/Review Approval_Task_1033.xsn
Outlook Error:
Outlook cannot open a new form. To open the file, access to the folliwng form template is required
http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn

can she open the approval form in web browser instead of Outlook?
According to the error message, it seems that the user does not have permission for the file http://<site url/_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn.
can she open see this file in SharePoint designer 2010? that is, open the site with SharePoint designer and navigate to All Files->_catalogs->wfpub->Approval - SharePoint 201o. If she can not see the file there, ask the workflow creator to publish
the workflow again. I had experienced strange issue in SharePoint designer 2007 and solved by check out all the workflow files and check in again
http://social.msdn.microsoft.com/Forums/en-US/sharepointworkflow/thread/b533cfa5-e858-4ff9-bd0d-96d19946b789.

How to open a pdf form with fdf data

Hi all,
I am working on a new project. In that, I have to load a PDF contract form with FDF data on Internet Explorer Window.
I don't know how to do it. Actually I tried using this format on the URL (while loading the respective page)
http://www.example.org/pdf_file_name.pdf#FDF=http://www.example.org/fdf_file_name.fdf
But it opened as an empty pdf document. . Actually I need it with the fdf data.
Can anyone know any other way to do this?
Or is this not possible to open a pdf form with fdf data in a browser?
Thanks in advance
Annamalai

@ Bernd. It still opens a text file
Here's my FDF file sample
%FDF-1.2
%âãÏÓ
1 0 obj
<<
/FDF << /Fields
<</V (07/22/2009)/T (Loan_Note_Date)>><</V (22.29)/T (Loan_AnnualPercentage_Rate)>></V ()/T (Seller_ESignatureArea1_Date)>><</V (GA Dealer)/T (Seller_Signer_FullNameTitle)>><</V ()/T (ThirdParty_ESignatureArea1_Date)>>
/F (MARSMFLZ.pdf)/ID [ <1f0b6b55f345db39e8246247138fe562><e960588530b0d06d35cd618b34d4c314>
]>>
>> endobj
trailer
<<
/Root 1 0 R
>>
%%EOF
(I have uploaded the related pdf file before.)
Just now I got an idea to use WScript (the code is written in javascript)
ws = new ActiveXObject("WScript.shell");
ws.Run('"AcroRd32.exe" "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf"', 1, true);
this opens my fdf document in Acrobat reader using command prompt.
I have a doubt now, can i use some string in place of "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf" in the above command?
I mean something like fdf_file = "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf"
and replace ws.Run('"AcroRd32.exe" fdf_file,1,true). I tried it but it doesn't work Any idea's? Since the path will not remain the same always. So i need to change it

Opening a composite form in SV

Similar Messages

Maybe you are looking for