Opening a XMI Interface...

I have problems in opening a correct XMI Session by using "BAPI_XMI_LOGON". I am not able to specify a certain Interface like the XAL or the XBP in the INERFACE-field. Only the standard case without an INTERFACE-input works...
Has anyone an expirience what the problem or the mistake could be...
PS.: This is my first big SAP Development Project...

Hi Matthäus !
I've just stumbled across your post searching because of the same problem. The thing is - you need to fill in the Version Parameter as well.
For Instance:
CALL FUNCTION 'BAPI_XMI_LOGON'
EXPORTING
    extcompany = 'Thisismycompany'
    extproduct = 'Thisismyproduct'
    interface = 'XBP'
    version    = '1.0'
IMPORTING
    sessionid = sessionid
    return     = return.
Regards + merry Xmas
Andreas

Similar Messages

Executing the planning function while opening the web interface

hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 0,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 8.300,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
Yogesh

Hi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
 Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono

My adobe Photoshop opens, loads full interface, then exits without any error message etc.

My adobe Photoshop opens, loads full interface, then crashes without any error message etc.
Help?

If there is no error from the OS - then it did not crash, just exited.

Clic to open plug-in interface!!!

Hi,
With the new Logic 9, each time i click on a third party plugin icon in the instrument track (in the mixer window), it pops a window saying "Clic to open plug-in interface"
...Cheeze!!!! if i clic on the plugin, that's because i want to see the plug-in interface!!!...
Why this stupid additional step ???
Do you know how to automatically open the plug-in interface when i click on the instrument in the mixer, like it was in previous Logic versions ?
Thanks
Antoine
Message was edited by: Antoine Fabi2

Is this because you are running in 64 bit mode and so it's using the 32 bit bridge to access certain plug ins?

NIMax shows error when opening device and interface

I have just installed NI-VISA 3.1. NIMax will not open the devices and interfaces configuration to allow me to see the GPIB and PXI devices.
It gives a message of "NIMax.exe has generated errors and will be closed by Windows. You will need to restart the program."

Hello,
It sounds like an installation has been corrupted. As a general, first-order fix for such problems, you can uninstall and reinstall the program with corrupted files (using add/remove programs from your control panel). To get a better idea for which program has corrupted files, when MAX crashes click the details button (if one shows) in the error message (include such information in any repost as well!). If your system was stable prior to installing NI-VISA 3.1, you can try uninstalling and reinstalling NI-VISA. If you have the time, I would uninstall all of your NI hardware and software, then reinstall your NI software, then reinstall your NI hardware (you should check your hardware manuals to be sure that your specific NI hardware does not require instal
lation before the software). Also, if you could provide the version information for all of your NI software and your current hardware setup (NI and otherwise), it may open other options for solutions!
Thank you,
Best Regards,
JLS
Applications Engineer
National Instruments
Best,
JLS
Sixclear

How do I open software instrument interfaces like ES1, etc?

I am completely new to Logic. I just got Logic Pro X and even after browsing the manual, I can't figure out something that should be pretty simple: how do I open the special visual interfaces for the software instruments like ES1, Sculpture, etc.? I don't see these listed in my instruments library either. I'm just really confused and would really appreciate some help. Thanks!

The Art Of Sound wrote:
Note: The OP is using LPX so the method is slightly different
Once you have created an Instrument track
Slecet the track...
Move your mouse pointer over the Instrument (or FX) slot in the track/channel inspector strip
You will see the slot changes to depict three different symbols in a row.
From Left to Right....
The first symbol is the On/Off button to turn a plugin on or off.
The second brings up the visual interface for that plugin
The third opens the Load Plugin Menu which you use to load in other plugins...
Here is a screenshot of the instrument slot and the symbols.. (Again, the symbols only appear when you move your mouse pointer over the slot.)
That's interesting to me, my "slots" don't "depict three symbols in a row" after having just created a SI track, only after loading them

Clicking on open CS 6 interface does not fully activate it...OSX

I have noticed that with CS 6, I can't fully use an application by clicking on it from another open application. If I am in Illustrator and Photoshop is in the background, I click on the Photoshop interface and it comes to the front of the screen, but that's all it does...no functionality beyond this. What must be done is for me to click on the Finder first, then click on the application icon in the Dock in order to access the program's functionality fully.
Has anyone had similar experience with this in OSX? It doesn't matter if it's Lion or Mountain Lion...I have two machines with different operating systems and both do the same thing.
I don't know if this is an Adobe issue or an Apple OS issue. I have looked into all the preferences on the applications as well as the OS X control panels...no luck.
Many thanks to someone who could clear this up for fix it...it is crazy annoying and a step back in terms of UI experience.
Thanks for Reading,
Viet

Everything is there, except you can't close or minimize the windows, or choose tools or open or import etc.
Yesterday I noticed it happening again, only this was while I was in After Effects clicking on an image in photoshop to edit it. No such luck. Strange thing is, it seems to happen randomly. I tried to reproduce the effect again with After Effects today by clicking on an open image in photoshop from the After Effects interface and it didn't do it. Sometimes it works, sometimes it doesn't...there is no rhyme or reason. Anytime I notice it, I take notes and the next day I try to reproduce it using the same situation as when it occured...and it doesn't happen for some reason.
Cuckooo, cuckooo, cuckooo....
I'm going crazy.

Change Open Directory Network Interface

I have a Mac Mini running Snow Leopard Server. This machine has two ethernet interfaces (internal and USB one). I'd like to restrict Open Directory/LDAP to run on ONLY ONE of the NICs, leaving the ports used by Open Directory/LDAP free on the other NIC. I seem to be unable to locate the necessary preference or configuration file to make this change. I am hoping someone on the forum knows how to accomplish this. Thank you in advance!

I have a Mac Mini running Snow Leopard Server. This machine has two ethernet interfaces (internal and USB one). I'd like to restrict Open Directory/LDAP to run on ONLY ONE of the NICs, leaving the ports used by Open Directory/LDAP free on the other NIC. I seem to be unable to locate the necessary preference or configuration file to make this change. I am hoping someone on the forum knows how to accomplish this. Thank you in advance!

User who opened a web interface

Hi all,
I'd like to know if a certain user is using a web interface or a planning layout, but looking in a sytem table and not with a tcode (once I found this table but now I can't remenber the name).
Anyone can help me ?
best regards,
Mirco

Hi all,
I'd like to know if a certain user is using a web interface or a planning layout, but looking in a sytem table and not with a tcode (once I found this table but now I can't remenber the name).
Anyone can help me ?
best regards,
Mirco

Internal error Occured mapping can not be opened - while opening interface

Hi Gurus,
I Am using ODI 11g to load data from Oracel to Oracel database using different schemas as a source to load facts.
for the first time its loading sucessfully and when i try to open the same interface to see the mapping its showing the errror like *"Internam error Occured mapping can not be opened"*
Tis is very urgent to resolve as per my project neeed.
Please suggest steps : how to resolve the issue.
Thanks in Advance.
regards
sri

While the iTunes app is being updated, you are correct, it cannot be opened.
This is true of all Apple apps on your Mac.
iTunes is not very large compared to other apps. Let it update, then open it.

Importing of Open sale order through DTW

Hi Experts,
Please explain how to upload open sale quotation,sale order,delivery,A/R Invoice.And what are the templates names for this.
Regards'
silpa

Hi Silpa n,
try to search the steps how to upload the open documents in the help file of DTW template. Here is the definition of the template and how to have it:
User-Defined Templates
Data Transfer Workbench provides users with default templates for all the objects in SAP Business One, which do not include user-defined fields. This release supports the import of user-defined fields for all the user-defined fields supported by SAP Business One DI API.
Use
As of Release 2005, SAP Business One Data Transfer Workbench allows the users to generate Microsoft Excel templates as the new interfaces.
There are situations where the user may need properties of the interface that are not provided by our templates. For example, in the case of User Defined Fields, the user can go to the Interface Maintenance tool to add the desired fields.
The user may also want to reduce the fields in the templates or rearrange the sequence of the fields. Interface Maintenance tool also allows users to remove unnecessary fields and rearrange them in the desired order.
After maintaining the interfaces, the user could generate new templates based on the new interfaces.
Procedure
1. To use the Interface Maintenance Tool, you need to first go to the menu bar and select Advanced à Maintain Interface to open the Maintain Interface window.
2. In the left frame, there is a drop-down list of all the business objects that are supported by the DTW. Each object contains one or more structures. For example, oChartofAccounts has one structure and oBusinessPartners has seven structures. To add or delete fields from these structures, right-click on a field and select Add Field or Delete Field. If you select Add Field, a list of fields will appear on the right frame. Double-click on a field from the list to add. Before it is added, the application will check if there is duplication. You can only add the fields that appear on the list.
3. To create a new template based on the new interface, right-click on a structure and choose Create Template for the Structure.
To view the existing templates that are provided with the installation, go to Start à Programs à SAP Business One à Data Migration à Templates
Rgds,

Interface determination Issue in PI7.1

Hi ,
I am working on PI 7.1
Problem 1:
I am not able create any interface determination objects. There is a lock object created everytime I use the wizard. Unlocking the object and run the cache refresh has not helped..
I am able to create the interface determination manually after removing the lock. But now I am not able to associate a operation/interface mapping to the Interface determination . After I selected a message/service interface in the Interface determination, I clicked on the mapping option. The possible mapping was showed up on the list. But once I select one option from the list it does not show up in the interface determination. The field remains blank.
Problem 2:
I am unable to open the existing interface determination also. These interface determinations are present in the DEV environment.I have taken the system copy of the dev environment on the UAT environment.I am getting the below error when i try to open the interface determination
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.swing.toolkit.ServerCallCancelledException: Unexpected exception.
     at com.sap.aii.ib.clsif.gen.BeanAccessHandler.handleRuntimeExInBusinessMethod(BeanAccessHandler.java:87)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:112)
     at com.sap.aii.ib.client.oa.ObjectHandler.read(ObjectHandler.java:119)
     at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.load(DefaultPersistenceHandler.java:94)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:249)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.load(OpenCommand.java:353)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.localOpen(OpenCommand.java:273)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:211)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:295)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:198)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:542)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.executeStandardOperation(ThreadedTree.java:2264)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:2196)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
====================================================================
== Content from the LogHandler =====================================
====================================================================
#300 11:56:48 [AWT-EventQueue-2] WARNING com.sap.aii.utilxi.swing.toolkit.ButtonPanel: Special button of type 4 was not added in order (class com.sap.aii.utilxi.swing.toolkit.ButtonPanel)
#299 11:56:48 [AWT-EventQueue-2] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
com.sap.aii.utilxi.swing.toolkit.ServerCallCancelledException: Unexpected exception.
     at com.sap.aii.ib.clsif.gen.BeanAccessHandler.handleRuntimeExInBusinessMethod(BeanAccessHandler.java:87)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:112)
     at com.sap.aii.ib.client.oa.ObjectHandler.read(ObjectHandler.java:119)
     at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.load(DefaultPersistenceHandler.java:94)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:249)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.load(OpenCommand.java:353)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.localOpen(OpenCommand.java:273)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:211)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:295)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:198)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:542)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.executeStandardOperation(ThreadedTree.java:2264)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:2196)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

Hi Shilpa,
Ask your basis guys to check the SP level of JAVA components in system component information of your PI7.1 system............ask them to check for patches for your SP level of PI7.1 or upgrade to a higer SP level...........
Also try this from your PI IB webpage, go to Administration - JAVA web start administration - then click on execute link in the status window and do a reinitialization of your JAVA web start...........then close your ID and reopen your ID........then create your interface determination again in ID...........
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Apr 29, 2009 9:05 AM
Edited by: RAJEEV GUPTA on Apr 29, 2009 9:25 AM

Creating Open Directory Replica fails with Server Admin Error Value 1127

Hallo,
I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
When executing
slapconfig -createreplica master.ourdomain.com diradmin
as root on the prospective replica machine, I get the following error message:
ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
That makes perfect sense to me, but how is it meant to work then?
Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
root login is not permitted to this machine via public key authentication.
While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
Replica Setup failed : This machine does not have a valid computer name
I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
Thanks and bye, Christian Völker

ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
Then configure the /etc/sshd_config file on the OD master like this:
\# Authentication:
PermitRootLogin yes
PasswordAuthentication yes
PubkeyAuthentication no
and the /etc/ssh_config file on the OD replica like this:
PasswordAuthentication yes
PubkeyAuthentication no
Then from the OD replica as the 'root' user issue:
slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

Opening a file with custom FileDialog. (VERY URGENT)

hi everybody,
I have a problem and stuck. I have developed a MDI application that provides all function like open saved files, create new, edit and lots of other. It only opens, save ,edit etc the graphical diagrams inside JInternalFrames. I have an icon on my desktop when clicked opens this Application. Just like Editplus, Word or some other application when you click on the icon it opens that. Same way I have created such functionality.
Now instead of this I have created a custom FileDialogfrom which the user selects this application and is opened. Now I have small icon for this FileDialog on the desktop when opened gives the interface to select the files to be opened. My FileDialog just looks like the FileDialog but some more functionality and more components like JComboBox, Jlist, JtextField, JButtons etc. in it and have removed some of them. I am extending JDialog. But now my probelm is when you select a file and click open, it should open the selected file. How can I achive this functionality in my custom FileDialog as I am not extending FileDialog and as it is built in the FileDialog. How can I open the files with any extension in it's related application e.g .doc files to be opened in MicrosoftWord, .txt to be opened in notepad, .c or .cpp in Visual Studio C++ etc.
How can I put this kind of functionality in my custom FileDialog. It's really important for me please any comments will help me alot. Thanks for the help

Hello,
I think you can write :
Runtime.getRuntime().exec("start.exe " + MyFileDialog.getDirectory() + MyFileDialog.getFile());
So, "start.exe" choose the application (not valid for NT machine), ".getDirectory()" return the PATH and ".getFile()" return the NAME.
Best regards from France
Thierry

To retreive the data based on input in a variable in web interface.

Hello all,
I am working on BW-BPS.
I have a web interface which has many variables.One of them is Version.
I fill in the values in the variables(including the version) and save the data.
This saves the plan data in the Infocube.
Now next time the user opens the web interface.when he enters the version which is existing in the cube,then
all the variables should get filled in with the values in the cube for that particular version.
how do i achieve this??I mean how do i code this in the BSP page of my web interface.
I have read about methods for redefinition in the class CL_UPWB_BSP_APPL.but do not know much about this.
Regards,
Dhanya.

hi,
you have to create a sub class of CL_UPWB_BSP_APPL i.e(create a class whose super class is CL_UPWB_BSP_APPL).
since the BSP Event Handlers are implemented in it
you can change accordingly.
check this for enhancement for web interface:
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/e5a562753511d5b3d70050dadfb23f/frameset.htm
regards,

Opening a XMI Interface...

Similar Messages

Maybe you are looking for