Opening an Oracle report in another window

I am calling Oracle Reports from HTMLDB, the report is called from a button press with a branch to a URL, a substitution string has been set up and single sign on is being used.
The url is:
&REPORTS_URL.module=&P2_REPORT_ID..rdf&ssoconn=devpmdb&destype=cache&P2_PARAMETER_LIST.&p_where=&P2_WHERE_CLAUSE.
My question is how can I open this in another window?

Thanks,
I have tried this by incorporating the javascript into the branch URL target:
javascript:popupURL(&REPORTS_URL.module=&P2_REPORT_ID..rdf&ssoconn=devpmdb&destype=cache&P2_PARAMETER_LIST.&p_where=&P2_WHERE_CLAUSE.)
The url does not work at all and redirects to the following page with an error indicating that no branch was found.
http://ukwar2dev4:7778/pls/htmldb/wwv_flow.accept
Can I actually supply this as a URL for a branch targer? And am I using the correct syntax? The url works fine without the popupURL call.

Similar Messages

  • Oracle Report in New window with submit

    Hello, I'm in urgent need of an example on how submit a page and open a Oracle Report in a new window. I've searched the forum and found similiar threads, but not exactly what I need. Basically, I have an html page with cascading LOVs in which the user can cascade down until they get to the report (oracle report) they will like to generate. I'm using Patrick's ApexLib for my cascading LOVs. The user can also pick a date range via a Date Picker. I need the page to submit so that paramters from the LOVs and Date Picker can be passed to the Oracle Report. The Oracle Report needs to open in a new window. Currently I'm using a button item using a branch which runs the report fine, but it comes up in the same page. Can someone point me in the right direction as to how to accomplish this? Thanks in advance for your help!
    Lou

    Hi Lou,
    you don't have to submit the page. If you have all the values on your page in HTML input fields you are fine. You would only submit it if you want to do some additional processing on the server to calculate values, ...
    So just create a button with "Redirect URL without submitting page",
    set "Target is a" to "URL" and use the following code in the "URL Target" property.
    javascript:popupURL('http://your_oracle_report_url/regionid='+$x('P4_REGION_ID').value+'city='+$x('P4_CITY').value);The $x('some_page_item').value is used in JavaScript to reference the current value of an HTML field. Use the same identifier as you have used for your item in APEX.
    Hope that helps
    Patrick
    My APEX Blog: http://inside-apex.blogspot.com
    The ApexLib Framework: http://apexlib.sourceforge.net
    The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

  • Open "Navigate" enabled report in new window - OBI10g.

    Hello Experts,
    May be its novice user question, i have 2 reports, source and target reports. Both reports are connected using "Navigate" functionality.
    Issue is, i wan to open the target report in new window? is that possible?
    using GO URL: we have an option like target='_blank'. but in navigate.. what is the option?
    Thanks in advance....
    Regards,
    Kiran

    The Navigate feature can be modified to open targets in a new window by following the below steps:
    - Edit OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\b_mozilla\viewhelper.js
    - Search for function NavigateInfo()
    - Find the line with code this.sWindowTarget = "_self";
    - Replace the line as this.sWindowTarget = "_blank";
    - Clear the browser cache and reload the page.
    The navigation targets will now open in a new window.

  • How to Open an Oracle Report From a JSF Page

    Hi there,
    I would be really grateful if anyone would find me a solution to the following scenario:
    In my company, we have a project where we have to convert Oracle Forms and Reports to Java Web Application. The conversion of forms is being done thourgh JSF/ADF technology but how can i open an Oracle Report from a JSF page after supplying it with parameters ? Or i have to do some type of conversion before ?
    Once again i would be thankfull for your replies.

    Tapash,
    Thanks for reponding.
    Here is the URL I am currently using :
    https://gccss.glendale.edu:8001/dev60cgi/rwcgi60?server=rep60_crp3+userid=apps/pswd@crp3+report=/u07/oracle/crp3appl/gcccus/11.5.0/reports/US/GCC_ACCRUAL_BAL_0505.rdf+desformat=html+paramform=yes+destype=cache+p_accesscode=""
    The p_accesscode is the parameter I need to pass to the Oracle report.
    Currently, when I click the button, it invokes the above URL and takes me to the parameter form of the Oracle report and when I enter the Username, it runs the report and displays the desired output. But, what I need to achieve is, to pass the current user who has logged in behind the scene and to get rid of the parameter screen totally. Is this doable ? If yes, please help me !!!
    Thanks
    Hilal

  • Starting Oracle Reports 11g in Windows 7

    Hi there,
    Does anyone have any luck running Oracle Reports 11g in Windows 7?
    I installed WLS server (10.3.2) successfully.
    I installed OFM (11.1.1.2) successfully.
    Started Oracle Forms 11g successfully. Able to connect to Oracle database and created a form.
    Registry: /SOFTWARE/ORACLE/KEY_OH2004471243: ORACLE_HOME=C:\Oracle\OFM11g\as_1
    System variables: PATH=C:\Oracle\OFM11g\as_1\jdk\bin;C:\Oracle\OFM11g\as_1\jdk\jre\bin;C:\Oracle\OFM11g\as_1\bin;%PATH%
    tnsnames.ora is in C:\oracle\TNSAdmin\
    Error starting Oracle Reports 11g
    C:\oracle\OFM11g\asinst_1\config\reports\bin\rwbuilder.bat
    java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
    rwbuilder.bat file:
    @REM
    @REM Copyright (c) 1999, 2008, Oracle and/or its affiliates.
    @REM All rights reserved.
    @REM
    @echo off
    @echo Starting Reports 11g Builder...
    setlocal
    call C:\oracle\OFM11g\asinst_1\config\reports\bin\reports.bat
    @echo on
    start C:\oracle\OFM11g\as_1\bin\rwbuilder.exe %*
    @echo off
    endlocal
    @echo on

    Problem fixed. It was a folder security with Windows 7. When setting folder security on the root folder, it did not cascade to all the subfolders, even checked off the "Replace all child object permissions with inheritable permissions from this object". After searching many folders, the "oracle_common" folder was access is denied. Granted permission to this folder, and able to start Oracle Reports with no errors (without to run as Admin).

  • Open oracle report in new window from method

    Hi,
    I have a requirement to do some stuff in the view object, save changes, launch an oracle report 10g in a new window, and then navigate to a new page on a SINGLE button press.
    I can get all this done using a command button to call may backing bean and a goButton to launch my report, but need to combine these into a single button.
    My question is, is there any way to launch my new window and report from the backing bean?
    Or is there some other way to accomplish these requirements?
    this is a JSF/BC app, jdev 10.1.3.3
    Thanks,
    Jim

    What if I have to do validation against the inputs that are used to dynamically generate the report url in the backing bean when clicking the "Button". I couldn't see there is a way for <af:goButton> to implement that. I think there should be some kind of action or listener in the backing where I can do the validation before I decide to open the new window for report.
    I searched the forum and there is a post that will use a form to open the report window using target="_blank" in the form's attribute, but that works only if we don't have to validate the inputs.
    I also tried to find a solution that will open a new windows in the backing bean by invoking a javascript, that javascript function will have the report url generated in the backing bean as the parameter. But so far, I couldn't find one with my ADF version 10.1.3.2.0. It looks like that in ADF 11, this approach might be feasible.
    Any idea, hints?

  • Error when open Oracle Report Builder 10g (Windows 7 Ultimate 32-bit)

    Hi all,
    I installed Oracle Developer 10g on windows 7 ultimate 32bit.
    Form builder running well, but the report got problem when i opened.
    This is the error message:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: rwbuilder.exe
    Application Version: 10.1.2.0
    Application Timestamp: 42ea43b7
    Fault Module Name: ROS.dll
    Fault Module Version: 10.1.2.0
    Fault Module Timestamp: 42c3b2b7
    Exception Code: c0000005
    Exception Offset: 0000afaa
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Can anyone help?
    Regards,
    eRie

    Hello,
    For installing Developer suite 10gR2 on windows 7 there are some special installation steps.
    Please make sure that i hava followed them as described in the metalink note:
    Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) (Doc ID 1292919.1)
    Also be aware of the following issue:
    Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 (Doc ID 1306651.1)
    Regards,
    Alex

  • Oracle reports 10 in windows 7 will not open.

    I just installed Oracle reports 10 on a windows 7 pc. It open once. I updated my tnsnames with the
    following
    # tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 300031815DT.HOSTED.LAC.COM)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = PLSExtProc)
    # I added the following1
    MYSTUFF=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=TEST.CA.US)
    (PORT=1521)
    (CONNECT_DATA=
    (SID=MID)
    Is there anything I should look at.
    Howard

    I reinstalled it. It works. I am able to open it but then the same problem happens again. Does any one know they appropriate way to install oracle developer suite 10g on windows7.
    To install it I did the following
    Install Oracle Developer Suite 10g on Windows 7 (64bit)
    Recently, I got a task to install Oracle Developer Suite on Windows 7(64bit), but there seems lots of hassles to achieve this goal. There is a thread on Oracle forum on that topic. Here I log what I did to get it installed on my Windows 7(64bit) with 8G RAM.
    extract the setup files (version 101202) downloaded from otn.
    right click the install\setup.exe property, set compatibility to Windows XP SP2
    edit the virtual memory size to custom size from 1024m to 8000m, restart it
    run the install\setup.exe
    Hope this helps.
    link http://anythingsimple.blogspot.com/2011/01/install-oracle-developer-suite-10g-on.html
    Howard

  • How to run Oracle Report in new window

    Hi,
    There appear to be many threads regarding this issue, but so far I've been unable to piece together a solution to my problem.
    My requirements are quite simple really.
    - Invoke an Oracle Report from an HTMLDB page
    - Pass parameters form the page to the report URL
    - Run the report in a new window
    I have created a simple example at:
    http://htmldb.oracle.com/pls/otn/f?p=36506:1
    Page 1 contains the following HTML Header attribute
    <script language="JavaScript" type="text/javascript">
    function callMyPopup (url){
    w = open(url,"winLov","");
    if (w.opener == null)
    w.opener = self;
    w.focus();
    </script>
    The URL i wish to invoke is
    http://myappserver/reports/rwservlet?test/test@test+report=test.rdf+&P1_PARAMETER.
    My question is, where would I put the code to invoke the URL? I'm trying to use the following code
    javascript:callMyPopup('http://myappserver/reports/rwservlet?test/test@test+report=test.rdf+&P1_PARAMETER.');
    I've tried putting this in a branch but I get a 'Page can not be displayed' error.
    Any help would be appreciated.
    Thanks
    Andrew

    Hi,
    I'm trying to invoke an oracle report through a button in apex2.2. Please let me know how to display the report in a new window.
    I have put the URL as of now in the branch of the button, and the report is getting displayed in the same window.
    I've read some of the posts and put the URL as the target of the button instead of a branch and also used the javascript:popupURL(), but it still doesnt work for me. The URL works fine without the javascript.
    I have put the URL as of now in the branch of the button, and the report is getting displayed in the same window.
    Thanks in advance,
    Priyanka

  • Error while calling oracle reports from another report

    Hello everyone,
    I have a problem running oracle reports. In one report I have a button
    that calls another report. There is a button for each row of the result
    in the first report , and i have used Srw.run_report to call the second
    report.
    My problem is, when I run the report, at the first time i can push the
    button and the second report opens and works correctly. But if i close
    the second report and come back to the first one, when i push the
    button for a different row ,the second report starts to run but then I
    get some oracle errors like table does not exist or... while the first
    time the report worked correctly.
    It seems that when i close the second report and go back to the first
    one, sth happens that changes my session or connection. I don't know
    what can be the problem.
    By the way, when I log in with the user that owns the tables and has
    all the privileges, I don't get this problem. It only occurs when I
    use other users ( which have all privileges on all of the tables
    needed in the report )
    I am using Report Builder 6.0.5 and the DB is Oracle Database 10g.
    Can anyone please help me with this problem?
    Thanx in Advance.
    Maryam.

    6.0.5 is not certified against 10g database, so I suggest to upgrade to 6.0.8.26 (6i patch 17) first to see if the problem is gone.

  • Display Oracle Report on new window

    Hi,
    How can I display Oracle report from HTML DB on a new browser window? I have branch to this report. Thanks much for your help.
    Lakshmi

    Search this forum for "new window". You should find it. Try:
    checkbox and report page in new window

  • How to install oracle report builder in windows 7

    Hi Team,
    Could you guide me to install oracle report 11g in my PC . Previously i was using 10g .
    OS : win 7
    DATABASE : 11g

    Follow How to install forms builder? | Oracle Community
    Hope read all and give a try.
    Hamid

  • DB2 OS400 Connection with Oracle Reports 9i with Windows XP

    Dear Friends
    I have a valid ODBC connection of DB2 OS400 and i am using the same with Crystal Report i want to use the same connection with oracle Reports 9i & Forms 9i.
    The response will be highly appriciated.
    Rgds
    Muhammad Tahir Khan

    duplicate post.
    DB2 OS400 Connection with Oracle Reports

  • How to select the Printer in Oracle Reports 6i R2 (Windows 7)

    Hi,
    In a client site they have more than one printer suppose one is dot matrix and other one is laser printer or some other brands.
    They take printouts in both. Recently I installed Oracle Forms & Reports 6i R2 Runtimes in some Windows 7 32 bit PCs. In those PCs, its not allow to choose the printer, it print with windows default printer.
    So Is there any way to give an option to select the printer...??
    Thank You.

    Client/Server version:
    - D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
    http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
    I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

  • How to open Jasper report in New window (new Browser,new Tab)

    Hi,
    I'm Using oracle jdeveloper 11.1.1.4.0 fusion middleware for Jasper report. i want to open the Jasper report in new window
    In Application On click of CommandMenuItem(ExportToHTML)it opens the New Window,.While opnening this window i want to call a method (This method opens the jasper report in current browser)
    I Tried the afterPhase and beforePhase for this but doesnt work for me.while executing this using beforePhase I'm getting following Exception :
    Pls Help on this.Thanks in Advance......!!
    Java.lang.IllegalStateException: strict servlet API: cannot call getOutputStream() after getWriter()
    at weblogic.servlet.internal.ServletResponseImpl.getOutputStream(ServletResponseImpl.java:280)
    at javax.servlet.ServletResponseWrapper.getOutputStream(ServletResponseWrapper.java:112)
    at ReportsDisplayBean.exportHtmlReport(ReportsDisplayBean.java:272)Is any other way to do this ? :(
    Thanks.

    Hi,
    The view itself is a Web Part called an XSLT List View Web Part (XLV for short). This Web Part is stored on an ASPX page that is by default associated with a list or library on your site.
    I suggest you can check if the view page is valid, also, you can try to create another view, then redirect to the view page to see if there is xslt in the page.
    Here are some detailed articels for your reference:
    Create a custom list view using SharePoint Designer
    Using SharePoint Designer 2010 to Work with Web Parts
    How to: Customize the Rendering of a Field on a List View
    Best Regards
    Zhengyu Guo
    TechNet Community Support

Maybe you are looking for