Starting Oracle Reports 11g in Windows 7

Hi there,
Does anyone have any luck running Oracle Reports 11g in Windows 7?
I installed WLS server (10.3.2) successfully.
I installed OFM (11.1.1.2) successfully.
Started Oracle Forms 11g successfully. Able to connect to Oracle database and created a form.
Registry: /SOFTWARE/ORACLE/KEY_OH2004471243: ORACLE_HOME=C:\Oracle\OFM11g\as_1
System variables: PATH=C:\Oracle\OFM11g\as_1\jdk\bin;C:\Oracle\OFM11g\as_1\jdk\jre\bin;C:\Oracle\OFM11g\as_1\bin;%PATH%
tnsnames.ora is in C:\oracle\TNSAdmin\
Error starting Oracle Reports 11g
C:\oracle\OFM11g\asinst_1\config\reports\bin\rwbuilder.bat
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
rwbuilder.bat file:
@REM
@REM Copyright (c) 1999, 2008, Oracle and/or its affiliates.
@REM All rights reserved.
@REM
@echo off
@echo Starting Reports 11g Builder...
setlocal
call C:\oracle\OFM11g\asinst_1\config\reports\bin\reports.bat
@echo on
start C:\oracle\OFM11g\as_1\bin\rwbuilder.exe %*
@echo off
endlocal
@echo on

Problem fixed. It was a folder security with Windows 7. When setting folder security on the root folder, it did not cascade to all the subfolders, even checked off the "Replace all child object permissions with inheritable permissions from this object". After searching many folders, the "oracle_common" folder was access is denied. Granted permission to this folder, and able to start Oracle Reports with no errors (without to run as Admin).

Similar Messages

Oracle XE 11g on Windows 7 32bit GUI won't start

Hi there,
i have installed Oracle XE 11g on Windows 7 32bit - Services are running - entries in the start menu are present.
When i try to start the graphical user interface (Browsing: http://127.0.0.1:8080/apex/f?p=4950), it doesn't work. A hint was to install a Microsoft Loopback adapter in the network properties. I did - it didn't help.
Any suggestions how i might get this running?
Cheers
Jan

Have you change your PC name since the install ?
if you have the change the lsnr file in network, XE folder.
Make sure that service Oracle MTS Recovery is not running.
can you connect to Db in cmd dos window sqlplus?
also check your hosts file in windows 127.0.0.1 might be resolved somewhere else.

How to start Oracle Report Builder in Linux

Hi all
Can someone please help by telling how can i start Oracle Report Builder in Linux????
Thank you and best regards to all

Hello,
there should be a script rwbuilder.sh
in ORACLE_HOME/bin for 10.1.2.
in ORACLE_INSTANCE/config/reports/bin for 11g
Of course, you need to have a "X Display Server " up and running and the variable DISPLAY must be set to this "X Display Server "
Example :
export DISPLAY=123.456.789.12:0
$ORACLE_HOME/bin/rwbuilder.sh
Regards

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Chinese Character in PDF format for Oracle Reports 11g

Hello Everyone,
Currently we have a Report that need to be display chinese character in PDF format.
We followed the steps specified in the "Oralce Fusion Middleware Publishing Reports to the Web with Oracle Reports Services"
documentation but things doesn't work. We also installed Adobe Acrobat Reader 9 and Asian Font Pack 9 on the server side
and even on the client/user/development side and followed the steps in the documentation, but no effect at all. Or we even
tried "Arial Unicode MS", same thing no effect.
For sure, we may miss something during PDF aliasing or PDF subsetting setup.
Anyone out there who has the same experience and able to resolve the issue that currently using the Oralce Fusion Middleware Reports 11g?
Doesn't matter if it does not related to chinese character, as long as it relates to this issue like japanese or arabic characters in PDF.
If its ok, kindly provide the steps how you do it.
Your help is highly appreciated.
Regards and Thank you very much!

I am now facing exactly the same problem as user449955 (Eric's). Dear Eric, how about your situation? If you have resolved this problem, may I ask for your solution?
In my case, using either font aliasing or font subsetting doesn't work at all (displaying "garbage" characters instead of Chinese characters). The setting in my uifont.ali is as follows:
If using font aliasing:
[PDF]
.....ZHT16HKSCS = "MSungStd-Light-Acro"
If using font subsetting (the REPORTS_PATH already includes "C:\Windows\Fonts"):
[PDF:Subset]
"Courier New" = "mingliu.ttc,2"
For both cases, the report server's NLS_LANG already set to "TRADITIONAL CHINESE_HONG KONG.ZHT16HKSCS" (I am in fact located at Hong Kong). For font aliasing, the client side already has Asian Adobe Reader with Asian font pack installed.
By the way, I noticed that the WebLogic EM is configuring/updating the uifont.ali file at "<instance home>\config\FRComponent\frcommon\tools\common" directory, but the Oracle Reports 11g's documentation sometimes advise to refer to another uifont.ali file located at "<instance home>\config\FRComponent\frcommon\guicommon\tk\admin" directory. Which one of the uifont.ali files is the one used by the Oracle Reporting Service?
My report server's platform is Windows 7 Enterprise (64-bit) and the Reports version is 11.1.1.3.
Anyone can help to advise?
Thank you very much.
Regards

Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

Hi All;
can install & configure forms & reports 11g on windows xp sp2 (32-bit)
regards

Yes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

Hi,
I have installed oracle forms and reports 11gR2 on Windows 7 Professional 64bit (and configured in development mode), the forms are working fine but when i run a report i get this message
REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0

I was trying to add a new destination:
<destination class="oracle.reports.server.DesMail" destype="mail"/>
I couldn't make it work , so I commented my changes.
In fact, I should have gone back to a backup file , as weblogic seemed to have changed the file itself!! (attributes of the xml tags were in different order, and more things ...) but just undoing what I have done did the trick.
This file seems to be quite picky, I left this tag uncommented
</pluginParam>
and the same REP-5226 error happened.

How to install oracle report builder in windows 7

Hi Team,
Could you guide me to install oracle report 11g in my PC . Previously i was using 10g .
OS : win 7
DATABASE : 11g

Follow How to install forms builder? | Oracle Community
Hope read all and give a try.
Hamid

How to Start Oracle Report in Unix?

hi
Does anyone know how to start oracle report in unix? I was
told to try this (r60desm) but that did not work. We are on 11i
and 6i. Please help
alpha

I don't have Forms/Reports 6i for UNIX. Have you tried typing "r60" and typing tab twice?

Getting Error While Displaying web page in Oracle Report 11g

Hi,
I am new to Oracle reports 11g. I have stuck into an error. While I'm trying to display the web page it says "No such Web command ()".
I am using following URL to call the report.
http://hostname:port/reports/rwservlet/?server=repserver&report=a.jsp&destype=cache&desformat=htmlcss&userid=scott/tiger@db
Please help me out from this.

Hi Rupesh,
Thanks a lot removing web solved my problem.
My second problem is
1) SAP xMII >Navigation services>Navigation do following
a) From the account name pull down menu select everyone
b)In the navigation tree tab page,choose Navigation Item >Add>Child
c)In the loading content dialog box,enter a name , for example,"Test"
d)choose."..."
e)In the File Browse dialog box,open the CM folder and navigate to teh QM folder
Select ZPPWeb.htm and choose Ok
After this I get error message as
"Can't move focus to the control because it is invisible , not enabled or of a type that does not accept the focus".
It does not add my htm file to the navigation link
Thanks in advance
Regards Namita

Oracle RAC 11g On Window Server 2003 Installation Step by Step

Hi all
I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003
I have tow nodes
EMC storage
Any body can help please ...
Thanks in Advance.
Edited by: MHAIDAR on Jun 15, 2011 1:19 AM

I tired searching onlie to get steps of installationg Oracle RAC 11g On Window Server 2003check this
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnWindows2003UsingVMware.php

Oracle Reports 11g: Configuration done through EM Console lost on restart

I am looking for some help in understanding how the configuration files are synched up with Managed Server domain in Oracle Reports 11g.
I have an HA environment that contains two managed servers on two nodes with admin server shared between the two nodes via NAS.
I am observing that configuration changes done to in-process reports server configuration using EM console (e.g. max Connections or shared job repositor etc) do not persist a server restart.
I have observed that the changes made by EM update the configuration files (rwserver.conf and rwservlet.properties files) under managed server domain directory.
But when the managed server is restarted, these files are overwritten by some other copy of the same file.
I am not able to zero down on the location of this master copy.
Any help in identifying that configuration and resolving this issue will be great!
I can provide more information if required.
Thanks!
Vikran

Thanks, The problem seem to persist in the opmn.log.
The logs say that there is a problem with the Connection. Particularly
01/21/03 07:27:09 Connection 1,206.101.32.36,6201
connect (errno=111)
Another error we are seeing is 6201
There is something about the DISPLAY variable being set in the configuration files. We made sure it was set according to the document note you have mentioned. After testing, the problem seem to persit.
02/10/01 07:27:09 Connection 1,206.101.32.36,6201 connect (errno=146). Document ID 283586.995 on Metalink mention some thing similar.
Thanks

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Oracle Reports 11g output in pdf issue

We are upgrading Oracle Forms and Reports from 10g to 11g R2. After moving the reports to 11g, the report layout is completely garbled/broken when it is shown as PDF (opened with adobe reader XI and older versions).
desformat=pdf
destype=cache
Output in HTML format is showing correctly.
desformat=html shows up ok.
Server: AIX 6.1
Weblogic 10.3.6
Java SDK : 1.6
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 – Production
Any help is greatly appreciated.
Thank you.

Are you using Oracle Forms and Reports 11.1.2.1.0 (the latest version of Forms/Reports 11gR2)? If yes, there is a known bug in all platforms except Linux where there are PDF viewing issues with the reports. According to My Oracle Support (MOS) note 1522543.1, this note goes into greater detail about the bug. It mentions to download Patch 16046595 from MOS. Apply this patch to your WebLogic domain, and it should fix the problem. When downloading the patch, make sure you are downloading the one for AIX as there are specific versions of the patch just for Solaris and Windows.
Before installing this patch (or installing any Oracle patch), I would do the following:
1. Review the README file which is included in the patch download.
2. Make a backup of your Middleware home.
To install the patch:
1. Download and unzip the patch into the filesystem. Let the extracted patch location be called PATCH_TOP.
2. Shutdown all WebLogic servers and instances (OPMN).
3. Set the ORACLE_HOME variable to be the location where your Oracle home is for Forms and Reports.
4. Append the PATH variable to include $MW_HOME/oracle_common/OPatch
5. Go to $PATCH_TOP/16046595
6. Run: opatch apply (if that does not work, try ./opatch apply)
7. Type in 'y' when it asks you if the system is ready for patching.
8. When the patch is successfully installed, start up OPMN and your WebLogic servers.
9. Test the issue to see if the PDF report comes out like it should.
Thanks,
Scott (PITSS)

Starting oracle weblogic server as windows Service

hi dear friends,
i am working with oracle Weblogic server 10.3 and oracle Jdeveloper 11g
i have an Ear file and deployed it on weblogic server and that work truly
now,i want to start my server with windows Services
for this goal i read some of the documents and created a windows service for my server
when i started windows Service of the server just console of weblogic is start
when i used debug mode for checking errors
i saw bottom errors:
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 26, 2009 9:09:34 AM IRDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'requestEar' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
how do solve their?

hi
i used your recommendation and set %WL_HOME%\common\bin\*commEnv.cmd to my path
in this case when i am starting service of my server from windows Service console
and then checked Deployment Files on my server
i saw my EAR File could not start and it state was failed
when i started from weblogic console
it had error deploying time
that error was :
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was: Locale not recognized
how do i solve it
regards
aghaluie

Starting Oracle Reports 11g in Windows 7

Similar Messages

Maybe you are looking for