Opening balance and closing balances for discounts?

Hi all,
I have a typical sceanario where in
opening balance for discounts 10,000 (balance of last month)
actual discounts from the sales order 5,000
manual upload is from flat file 2,000
closing balance is 7,000 (which is opening balance + manual upload - actual discounts)
opening and closing balance needs to be calculated, how to calculate nor handle this on every month?
level of granularity of the data is
sku, month, rebate category and rebate amount?
Thanks

Hi Pooja,
can you please let us know few things about your report requirements
What is the extractor you are using?
What are the KFs ?
what are the selection parameters that you want to enter at the reporting level?
is it the report related to FI AR. do you want to display the values based on the customer -->profitcenter?
Bcoz we had a same requirement where our requirement was global recievables aging report in which the report need to display opening bal, sales,adjustment,colelction and closing balance and the aging values.
here what we did is changed the modeling of the DSO and infocube.
we had used non-cumulative KF in order to calculate closing balance and from that derived opening balance and again create a new formula to get the closing balance.
if you can be specific with your requirement hope can help you with your report.

Similar Messages

Opening Balances and Closing Balance of customer

Hi,
Does SAP provide any standard customer account statement for Opening Balances and Closing Balance for specific date range have given in selection screen?
The statement also contains reference number, order, and Delivery number.
Note: FBL5N Transaction code will not sufficient for the requirement, so looking for any other transaction code / report provided by SAP already for it.
Thanks in advance,
Shwetha

Hi,
There are several standard reports which could be easily accessed through the menu (Accounts Receivable - Information systems). If none of these reports does not suit your requirement, you have to develop your own.
Regards,
Eli

Opening Balance and closing balance

Dear All,
Can i create a calculated field for ledger opening balance and closing balance. we are using epicor. I dont know the exact table which captures opening balance and closing balance, where as i got credit balances and debit balances for the segments, i could not find opening and closing balances in this table. table name is GLjrntdtl . Any ideas on this subject please.
Thanks & Regards,
Akram

hi Akram,
this is a question that you may wish to ask at the epicor forums
-jamie

RG1 register opening balance and closing balance updation

Hi All,
We are using the RG1 register recently i.e. after the Functional Upgrade (ECC 6.0). While executing J2I6 RG1 Excel report, opening balance and closing balance is not appearing in the report even though we have done the J1I5 extraction.
Is it mandatory to update the J_2IRG1BAL table with zero stock as and when the new material codes are created.
Regards,
Praveen

HI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth

REGARDING OPENING BALANCE AND CLOSING BALANCE

Hi, All
After executing the TCode - FBL3N, we get the details list. There we also need to display the OPENING BALANCE AND CLOSING BALANCE according to G/L Account and Company Code.

Hi
For opening balance, please use transaction F.01.
Then go to special evaluations and choose balance sheet type 4 (opening balance)
Kind regards
JeVe

Opening balance and closing balance on Receivables Customer Statement repor

I need an opening balance and closing balance of the customer statement in one report. Currently I developed a custom Customer statement report in report builder 6i. I developed a custom procedure to retrieve the previous statement balance. I’m able to successfully retrieve ending balance statement with sysdate but if I go back to previous date or previous statement date then I’m not getting the right ending balance of the report.
Even the seeded api arp_customer_aging provides the ending balance for sysdate but not for previous dates because this api always looks back to amount due remaining column(ar_payment_schedules_all).
Did any one ever develop a custom logic to get previous balance and ending balance on one single customer statement?

Hi,
I am working on the same logic. My program loads opening and closing balance and a list of items everyday. The GL_balances table gives you current balance but if you want the previous balance, you have to use : "gl_daily_balances" table and provide accounting_date for which you want the balance.
Hope this Helps!
Yogini

How is carry forward balance and closing balance stored in BW

Hello all,
I am working with the new G/L cube...and as per one of the reporting needs I need to display the carry forward balance and closing amount balance that comes from R/3.
Can someone tell me how can this be achieved in BW.
Thanks,

if you are in 2006 ...execute the report for 2005...and at the end of the year whatever amount shows up in your cumulative balance key figure, is the balance that has been carried forward into 2006...
assign points if it helps...
P.S: Check if tcode fs10n helps in R/3

Mismatching between opening balance and closing balance in F.08

Dear Experts,
i have one issue regardig the dismatching between the closing balance of 2010 and the opening balances of 2011.
Actually we have the retention account for customer which showing a correct figure in 2010 but unfortnatly it showing another figure in the opening of 2011.
Note: i have done the carryforward succefully but i am getting the same result as well.
please would you advice me ?
Regards,
Bilal

Hi,
Run report RFINDEX_NACC (in SE38, older versions of SAP have RFINDEX as the program) for the GL account. Please read the documentation of the program; as the program is resource intensive; limit your selection to this specific account. Select the "more detailed" radio button. should help you identify the reason.
Also do check that the 2010 period is not open and being posted into.
Cheers..
Edited by: Neeraj Kukreti on Jul 6, 2011 2:29 PM

Opening Balance and closing Balance - Crystal Report

Hi,
We have a report with account number, date , opening balance , closing balance and transaction amount. we had grouped the report by account. User will run the report with set of date range and we need to find the minimum date to find the opening balance and maximum date to find the closing balance and display them in the account group header for each account.
WhilePrintingRecords;
NumberVar CBal;
If {Command.VALUEDATE}= Maximum({Command.VALUEDATE}) then
CBal= {Command.CLOSINGBALANCE};
+CBal;
It is showing the closing balance and opening balance in the account group footer. but we could not able to show in the account group header.
Regards,
Sreeni

The easiest way to do this is NOT use variables.
Sort the data in date order ascending.
Then simple place the date field in Group header, details and footer.
Header will now show first date and Footer last date.
Ian

Opening balance and closing balance of BANK accounts

I would like to see the replica of Pass book (bank statement ie opening balance
+/- tranactions during the month then closing balance.
I would like to execute and get these Bank Journals at any point of time for any period/year.
Is this possible in SAP?
Thanks a lot for helping on this
Sridevi

Hi
I heard that its not possible even with Z report. is that so? Or do you think its possible with Z report or report painter. Could you tell me the reasons for this?
Thanks
Sridevi

Gl opening balance and closing balance not maching

Dear all,
am looking at IT12 balance, and the issue is that the GL 495000 into the TB is 8,670.68 While if I browse in Fagll03 the balance is 7,307.88
Can you please clarify with figure is wrong !!!!!! And why they do not match !!!!!!!!
IT12 is the COM. CODE
TB means trail balance acct
Fagllo3 is the T.code in 6.0 to view acct balances (behalf of FS10N)
This is my clint issue.can any body tell me procedure to solve
Thanks in advance
srinivas

Dear friends,
Thanks for your quick reply,
I have carryforworded gl balance again. still it showing worng balances only. Should i check anything other than f.16.
plz help me
Regards
srinivas

Opening and Closing balance in FBL3N?

Hi All,
In other ERP systems, if you browse GL Account, i.e. FBL3N in SAP, you get the list of documents within specified period but in other systems you also get the OPENING balance as well as CLOSING balance and the current postings are in between them. Is there any standard report or report painter is to be used for such requirement.
Balances can be checked through FS10N and S_ALR_87012301 etc. but requirement is to get the list of documents with opening and closing balance in beginning and end of the report. The best example is of Cash Journal (Txn FBCJ)
Thanks

Thank you Will,
Yes, actually if other system provide such functionality then SAP should be providing that. I searched within table TSTC for such transaction but unable to get. Accountants requirement is when they execute FBL3N within specified period, the cummulative opening balance and closing balance should be provided with report.
Thanks for your answer!
Regards,
Nayab

How to check RG1 Opening and Closing balance

Dear All,
Kindly let me know how to check the opening balance and closing balance in RG1 register.
Regards,
Mullairaja

Dear J Prakash,
Do we need to check the balance based on Excise Transaction Type?
I assumed that, we need to check as per the Registers.
Similary, please clarify another doubt also.
On what basis we need to check Excise balances?
1. Based on Excise Registers
2. Based on Excise Transaction Types
3. Based on G/L accounts.
Regards,
Mullairaja

Reg:Opening and Closing Stock For Plant

Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AM

Hi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat.

Letter of Credit for imports, openning amendment and closing process

Hi All,
Can any body explain the process for the letter of credit opening amendment and closing process for imports.
ur earliest response would be highly appreciated.
Thanks & Regards,
Althaf.

Hi Phani
Thank for your help
Please tell me step by step from creating a letter of credit to paying
I have a business below:
1. The Clearing agent ask for amount, the person who receive the product will give Letter of Authority to Clearing Agent. The clearing agent move to bank and take check.
For this purpose, we just issue LA.
2. Prepare Purchase for the Vendor from whom we are going to receive the product. There may be 2 or more Vendors.
1. Product cost to be transferred to Vendor A
2. Freight or Other Charges to Vendor B
3. Customs Duty and Others to Vendor C
3. First We have to pay Customs Duty to Commissioner of Customs after LA issued.
Entry : Customs Clearing a/c   Dr
           Cess on Custom a/c    Dr
           CVD Clearing a/c       Dr
           Cess on CVD a/c       Dr
           Special CVD a/c        Dr
           Vendor C a/c             Cr.
4. Cenvat credit for the product will be taken by person who handling Excise in that company
Entry : Cenvat Clearing a/c Cr.
            RG23A Part II   a/c Dr.
5. Clearing of Cenvat Credit
Entry : Cenvat Clearing a/c Dr.
            CVD clearing a/c    Cr.
            Cess on CVD a/c     Cr.
            Special CVD a/c     Cr.
6. After Bank payment they will transfter to us
Entry : Vendor a/c - Dr.
           Bank   a/c - Cr.
Please tell me how to configure and post accounting entries
Step by step
Thank you very much
Minh

Opening balance and closing balances for discounts?

Similar Messages

Maybe you are looking for