OpenSSL SSL/TLS Man-In-The-Middle Injection Attack CVE-2014-0224

Can some help me to fix Open SSL Issue in Windows server 2008 R2 CVE-2014-0224 , Please advice

Hi,
From the description on Open SSL site, it is fixed in newer versions so could you update to the new version?
https://www.openssl.org/news/vulnerabilities.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
CVE-2014-0224: 5th June 2014
An attacker can force the use of weak keying material in OpenSSL SSL/TLS clients and servers. This can be exploited by a Man-in-the-middle (MITM) attack where the attacker can decrypt and modify traffic from the attacked client and server. (original advisory).
Reported by KIKUCHI Masashi (Lepidum Co. Ltd.).
Fixed in OpenSSL 1.0.1h (Affected 1.0.1g, 1.0.1f, 1.0.1e, 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1)
Fixed in OpenSSL 1.0.0m (Affected 1.0.0l, 1.0.0k, 1.0.0j, 1.0.0i, 1.0.0g, 1.0.0f, 1.0.0e, 1.0.0d, 1.0.0c, 1.0.0b, 1.0.0a, 1.0.0)
Fixed in OpenSSL 0.9.8za (Affected 0.9.8y, 0.9.8x, 0.9.8w, 0.9.8v, 0.9.8u, 0.9.8t, 0.9.8s, 0.9.8r, 0.9.8q, 0.9.8p, 0.9.8o, 0.9.8n, 0.9.8m, 0.9.8l, 0.9.8k, 0.9.8j, 0.9.8i, 0.9.8h, 0.9.8g, 0.9.8f, 0.9.8e, 0.9.8d, 0.9.8c, 0.9.8b, 0.9.8a, 0.9.8)
If you have any feedback on our support, please send to [email protected]

Similar Messages

  • SSL and Man-in-the-Middle

    Ok guys,
    First, I'm not up on security issues. I had a security expert look over
    weblogic and SSL. He said that SSL was NOT a good protocol. It is what we
    are stuck with. He demonstrated in a matter of about 30 minutes a technique
    he called Man-In-The-Middle attack and was intercepting SSL traffic between
    the outside world and Weblogic SSL.
    Now the question. Is there any way to detect this or stop it from happening?
    Welogic never detected a security breach. I saw this demonstrated and know
    it can be done. How do you prevent this? Should there be a way for Weblogic
    SSL to detect if somone is doing this?
    Thanks,
    Mica Cooper

    An SSL man in the middle attack is possible if:
    1) The attacker manages to obtain your private key. Good server security
    should minimize the chances of this happening.
    2) The attacker can insert their own CA certificate into the browser and use
    this certificate to sign their own server certificate. This is tricky and
    can only be done if the attacker has some sort access to the machine(s) on
    which the client browsers run.
    3) The attacker manages to get a certificate from a CA your browser trusts
    and that certificate contains the common name of your server. This one
    basically requires the CAs misuse their keys. Hopefully this doesn't happen.
    4) The attacker uses their own server certificate and the user blindly
    clicks through the warnings the browser provides. There is nothing really
    that can be done to stop this one. If the user wants to ignore the warnings
    their browser pops up then that's their problem. Of course there are
    browsers out their that won't display any warnings (I'd say people shouldn't
    be using such browsers but then the vast majority of internet users don't
    have the security education or experience to make decisions like that
    themselves).
    "Mica Cooper" <[email protected]> wrote in message
    news:[email protected]...
    Tolu,
    No he didn't break it. He acted as the middleman. The server thought hewas
    the client and the client thought he was the server. He just set in the
    middle and swapped all the keys, then collected all the data. He had apiece
    of software commonly available on the net for doing this.
    Mica Cooper
    "Tolu Agbeja" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    do you mean he was able to break the key exchange protocol?
    A ssl session involves a handshaking period during which, based on a keyexchange protocol a pair of assymetric keys are used to negotiate asymetric
    key that will be used to encrypt data exchanged within that particular
    session.
    This is an interesting issue and I think it will serve the community
    well
    if you asked your security expert to let us know what he/she actually did.
    "Mica Cooper" <[email protected]> wrote:
    Ok guys,
    First, I'm not up on security issues. I had a security expert look over
    weblogic and SSL. He said that SSL was NOT a good protocol. It is what
    we
    are stuck with. He demonstrated in a matter of about 30 minutes atechnique
    he called Man-In-The-Middle attack and was intercepting SSL trafficbetween
    the outside world and Weblogic SSL.
    Now the question. Is there any way to detect this or stop it fromhappening?
    Welogic never detected a security breach. I saw this demonstrated andknow
    it can be done. How do you prevent this? Should there be a way forWeblogic
    SSL to detect if somone is doing this?
    Thanks,
    Mica Cooper

  • Microsoft Windows Remote Desktop Protocol Server Man in the Middle Weakness

    Dear All
    i got a report from security team that i have this weakness on several servers in my domain, what i have to do here?
    Thanks

    The short answer:
    Mutual Authentication
    Depending on your environment, there are going to be different paths in order to achieve this goal.
    If your running a Win 2003 domain, this should help:
    How to configure a Windows Server 2003 terminal server to use TLS for server authentication
    http://support.microsoft.com/kb/895433
    Or if your running a Win 2008 domain, this provides some good info:
    Configuring Terminal Servers for Server Authentication to Prevent “Man in the Middle” Attacks
    http://blogs.msdn.com/b/rds/archive/2008/07/21/configuring-terminal-servers-for-server-authentication-to-prevent-man-in-the-middle-attacks.aspx

  • SSH Man-in-the-middle Attack

    I currently am living abroad and use ssh to tunnel back home to a couple of different networks and servers. Recently my ISP wired my building for a new high-speed line, however I suspect a rogue tech has wired a man-in-the-middle machine between me and the internet. Am I crazy?
    Now when I try to connect to any of my back home networks, I get the warning "The server's host key does not match the one cached in the registry ... the new rsa2 fingerprint is: "xx:xx:xx:xx:yadayada".
    This same "new" rsa2 fingerprint pops up regardless of the network I try to connect to. This alone is suspicious, because each network should have a unique fingreprint. Regardless, I double checked and confirmed it is not one of my valid host keys.
    I can connect without this warning as long as I am not at my home network, and the cached host keys are still valid.
    I am left to believe that there is a device (with fingerprint xx:xx:xx:xx:yadayada) sitting between my router's WAN and the ISP's router's LAN.
    Is my ISP trying to steal my passwords? is there another logical explanation? If I do have a man-in-the-middle, how do I get him to go away? Can I bypass him?

    Below are (4) connections with *ssh -v -v -v*:
    The first two are connections to two remote hosts on a safe connection
    The last two are connections to the same two on the connection in question
    Not the last two give the man-in-the-middle warning, and share the SAME 'new' rsa fingerprint, I dont know why these would be the same unless there is a man in the middle.
    \\KNOWN SAFE CONNECTION - CONNECT TO REMOTE HOST #1
    My-Computer:root# ssh -p 1234 -c aes256-cbc -v -v -v [email protected]
    OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
    debug1: Reading configuration data /etc/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to XX.XX.XX.XX [XX.XX.XX.XX] port 1234.
    debug1: Connection established.
    debug1: permanentlysetuid: 0/0
    debug1: identity file /var/root/.ssh/identity type -1
    debug1: identity file /var/root/.ssh/id_rsa type -1
    debug1: identity file /var/root/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1
    debug1: match: OpenSSH_5.1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.5
    debug2: fd 4 setting O_NONBLOCK
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: SSH2MSGKEXINIT sent
    debug1: SSH2MSGKEXINIT received
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: mac_init: found hmac-md5
    debug1: kex: server->client aes256-cbc hmac-md5 none
    debug2: mac_init: found hmac-md5
    debug1: kex: client->server aes256-cbc hmac-md5 none
    debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<4096<8192) sent
    debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
    debug2: dhgenkey: priv key bits set: 252/512
    debug2: bits set: 2066/4096
    debug1: SSH2MSG_KEX_DH_GEXINIT sent
    debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
    debug3: puthostport: [XX.XX.XX.XX]:1234
    debug3: puthostport: [XX.XX.XX.XX]:1234
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: match line 4
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: match line 4
    debug1: Host '[XX.XX.XX.XX]:1234' is known and matches the RSA host key.
    debug1: Found key in /var/root/.ssh/known_hosts:4
    debug2: bits set: 2051/4096
    debug1: sshrsaverify: signature correct
    debug2: kexderivekeys
    debug2: set_newkeys: mode 1
    debug1: SSH2MSGNEWKEYS sent
    debug1: expecting SSH2MSGNEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2MSGNEWKEYS received
    debug1: SSH2MSG_SERVICEREQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2MSG_SERVICEACCEPT received
    debug2: key: /var/root/.ssh/identity (0x0)
    debug2: key: /var/root/.ssh/id_rsa (0x0)
    debug2: key: /var/root/.ssh/id_dsa (0x0)
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
    debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive
    debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
    debug3: authmethod_lookup gssapi-keyex
    debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
    debug3: authmethodisenabled gssapi-keyex
    debug1: Next authentication method: gssapi-keyex
    debug1: No valid Key exchange context
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup gssapi-with-mic
    debug3: remaining preferred: publickey,keyboard-interactive,password
    debug3: authmethodisenabled gssapi-with-mic
    debug1: Next authentication method: gssapi-with-mic
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: Miscellaneous failure
    No credentials cache found
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup publickey
    debug3: remaining preferred: keyboard-interactive,password
    debug3: authmethodisenabled publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /var/root/.ssh/identity
    debug3: no such identity: /var/root/.ssh/identity
    debug1: Trying private key: /var/root/.ssh/id_rsa
    debug3: no such identity: /var/root/.ssh/id_rsa
    debug1: Trying private key: /var/root/.ssh/id_dsa
    debug3: no such identity: /var/root/.ssh/id_dsa
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup keyboard-interactive
    debug3: remaining preferred: password
    debug3: authmethodisenabled keyboard-interactive
    debug1: Next authentication method: keyboard-interactive
    debug2: userauth_kbdint
    debug2: we sent a keyboard-interactive packet, wait for reply
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 1
    Password:
    debug3: packet_send2: adding 16 (len 37 padlen 11 extra_pad 64)
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 0
    debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64)
    debug1: Authentication succeeded (keyboard-interactive).
    debug1: channel 0: new [client-session]
    debug3: sshsession2open: channel_new: 0
    debug2: channel 0: send open
    debug1: Entering interactive session.
    debug2: callback start
    debug2: clientsession2setup: id 0
    debug2: channel 0: request pty-req confirm 0
    debug3: ttymakemodes: ospeed 9600
    debug3: ttymakemodes: ispeed 9600
    debug3: ttymakemodes: 1 3
    debug3: ttymakemodes: 2 28
    debug3: ttymakemodes: 3 127
    debug3: ttymakemodes: 4 21
    debug3: ttymakemodes: 5 4
    debug3: ttymakemodes: 6 255
    debug3: ttymakemodes: 7 255
    debug3: ttymakemodes: 8 17
    debug3: ttymakemodes: 9 19
    debug3: ttymakemodes: 10 26
    debug3: ttymakemodes: 11 25
    debug3: ttymakemodes: 12 18
    debug3: ttymakemodes: 13 23
    debug3: ttymakemodes: 14 22
    debug3: ttymakemodes: 17 20
    debug3: ttymakemodes: 18 15
    debug3: ttymakemodes: 30 0
    debug3: ttymakemodes: 31 0
    debug3: ttymakemodes: 32 0
    debug3: ttymakemodes: 33 0
    debug3: ttymakemodes: 34 0
    debug3: ttymakemodes: 35 0
    debug3: ttymakemodes: 36 1
    debug3: ttymakemodes: 38 1
    debug3: ttymakemodes: 39 1
    debug3: ttymakemodes: 40 0
    debug3: ttymakemodes: 41 1
    debug3: ttymakemodes: 50 1
    debug3: ttymakemodes: 51 1
    debug3: ttymakemodes: 53 1
    debug3: ttymakemodes: 54 1
    debug3: ttymakemodes: 55 0
    debug3: ttymakemodes: 56 0
    debug3: ttymakemodes: 57 0
    debug3: ttymakemodes: 58 0
    debug3: ttymakemodes: 59 1
    debug3: ttymakemodes: 60 1
    debug3: ttymakemodes: 61 1
    debug3: ttymakemodes: 62 1
    debug3: ttymakemodes: 70 1
    debug3: ttymakemodes: 72 1
    debug3: ttymakemodes: 73 0
    debug3: ttymakemodes: 74 0
    debug3: ttymakemodes: 75 0
    debug3: ttymakemodes: 90 1
    debug3: ttymakemodes: 91 1
    debug3: ttymakemodes: 92 0
    debug3: ttymakemodes: 93 0
    debug2: channel 0: request shell confirm 0
    debug2: fd 4 setting TCP_NODELAY
    debug2: callback done
    debug2: channel 0: open confirm rwindow 0 rmax 32768
    debug2: channel 0: rcvd adjust 2097152
    Last login: Fri Nov 28 07:35:53 2008 from AA.AA.AA.AA.
    \\KNOWN SAFE CONNECTION - CONNECT TO REMOTE HOST #2
    My-Computer:root# ssh -p 1234 -c aes256-cbc -v -v -v [email protected]
    OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
    debug1: Reading configuration data /etc/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to YY.YY.YY.YY [YY.YY.YY.YY] port 1234.
    debug1: Connection established.
    debug1: permanentlysetuid: 0/0
    debug1: identity file /var/root/.ssh/identity type -1
    debug1: identity file /var/root/.ssh/id_rsa type -1
    debug1: identity file /var/root/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.7
    debug1: match: OpenSSH_4.7 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.5
    debug2: fd 4 setting O_NONBLOCK
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: SSH2MSGKEXINIT sent
    debug1: SSH2MSGKEXINIT received
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: mac_init: found hmac-md5
    debug1: kex: server->client aes256-cbc hmac-md5 none
    debug2: mac_init: found hmac-md5
    debug1: kex: client->server aes256-cbc hmac-md5 none
    debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<4096<8192) sent
    debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
    debug2: dhgenkey: priv key bits set: 267/512
    debug2: bits set: 2065/4096
    debug1: SSH2MSG_KEX_DH_GEXINIT sent
    debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
    debug3: puthostport: [YY.YY.YY.YY]:1234
    debug3: puthostport: [YY.YY.YY.YY]:1234
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: match line 5
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: match line 5
    debug1: Host '[YY.YY.YY.YY]:1234' is known and matches the RSA host key.
    debug1: Found key in /var/root/.ssh/known_hosts:5
    debug2: bits set: 2052/4096
    debug1: sshrsaverify: signature correct
    debug2: kexderivekeys
    debug2: set_newkeys: mode 1
    debug1: SSH2MSGNEWKEYS sent
    debug1: expecting SSH2MSGNEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2MSGNEWKEYS received
    debug1: SSH2MSG_SERVICEREQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2MSG_SERVICEACCEPT received
    debug2: key: /var/root/.ssh/identity (0x0)
    debug2: key: /var/root/.ssh/id_rsa (0x0)
    debug2: key: /var/root/.ssh/id_dsa (0x0)
    debug1: Authentications that can continue: publickey,password,keyboard-interactive
    debug3: start over, passed a different list publickey,password,keyboard-interactive
    debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
    debug3: authmethod_lookup publickey
    debug3: remaining preferred: keyboard-interactive,password
    debug3: authmethodisenabled publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /var/root/.ssh/identity
    debug3: no such identity: /var/root/.ssh/identity
    debug1: Trying private key: /var/root/.ssh/id_rsa
    debug3: no such identity: /var/root/.ssh/id_rsa
    debug1: Trying private key: /var/root/.ssh/id_dsa
    debug3: no such identity: /var/root/.ssh/id_dsa
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup keyboard-interactive
    debug3: remaining preferred: password
    debug3: authmethodisenabled keyboard-interactive
    debug1: Next authentication method: keyboard-interactive
    debug2: userauth_kbdint
    debug2: we sent a keyboard-interactive packet, wait for reply
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 1
    Password:
    debug3: packet_send2: adding 32 (len 23 padlen 9 extra_pad 64)
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 0
    debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64)
    debug1: Authentication succeeded (keyboard-interactive).
    debug1: channel 0: new [client-session]
    debug3: sshsession2open: channel_new: 0
    debug2: channel 0: send open
    debug1: Entering interactive session.
    debug2: callback start
    debug2: clientsession2setup: id 0
    debug2: channel 0: request pty-req confirm 0
    debug3: ttymakemodes: ospeed 9600
    debug3: ttymakemodes: ispeed 9600
    debug3: ttymakemodes: 1 3
    debug3: ttymakemodes: 2 28
    debug3: ttymakemodes: 3 127
    debug3: ttymakemodes: 4 21
    debug3: ttymakemodes: 5 4
    debug3: ttymakemodes: 6 255
    debug3: ttymakemodes: 7 255
    debug3: ttymakemodes: 8 17
    debug3: ttymakemodes: 9 19
    debug3: ttymakemodes: 10 26
    debug3: ttymakemodes: 11 25
    debug3: ttymakemodes: 12 18
    debug3: ttymakemodes: 13 23
    debug3: ttymakemodes: 14 22
    debug3: ttymakemodes: 17 20
    debug3: ttymakemodes: 18 15
    debug3: ttymakemodes: 30 0
    debug3: ttymakemodes: 31 0
    debug3: ttymakemodes: 32 0
    debug3: ttymakemodes: 33 0
    debug3: ttymakemodes: 34 0
    debug3: ttymakemodes: 35 0
    debug3: ttymakemodes: 36 1
    debug3: ttymakemodes: 38 1
    debug3: ttymakemodes: 39 1
    debug3: ttymakemodes: 40 0
    debug3: ttymakemodes: 41 1
    debug3: ttymakemodes: 50 1
    debug3: ttymakemodes: 51 1
    debug3: ttymakemodes: 53 1
    debug3: ttymakemodes: 54 1
    debug3: ttymakemodes: 55 0
    debug3: ttymakemodes: 56 0
    debug3: ttymakemodes: 57 0
    debug3: ttymakemodes: 58 0
    debug3: ttymakemodes: 59 1
    debug3: ttymakemodes: 60 1
    debug3: ttymakemodes: 61 1
    debug3: ttymakemodes: 62 1
    debug3: ttymakemodes: 70 1
    debug3: ttymakemodes: 72 1
    debug3: ttymakemodes: 73 0
    debug3: ttymakemodes: 74 0
    debug3: ttymakemodes: 75 0
    debug3: ttymakemodes: 90 1
    debug3: ttymakemodes: 91 1
    debug3: ttymakemodes: 92 0
    debug3: ttymakemodes: 93 0
    debug2: channel 0: request shell confirm 0
    debug2: fd 4 setting TCP_NODELAY
    debug2: callback done
    debug2: channel 0: open confirm rwindow 0 rmax 32768
    debug2: channel 0: rcvd adjust 2097152
    Last login: Fri Nov 28 07:42:20 2008 from AA.AA.AA.AA
    \\ MAN-IN-THE-MIDDLE - CONNECT TO REMOTE HOST #1
    My-Computer:root# ssh -p 1234 -c aes256-cbc -v -v -v [email protected]
    OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
    debug1: Reading configuration data /etc/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to XX.XX.XX.XX [XX.XX.XX.XX] port 1234.
    debug1: Connection established.
    debug1: permanentlysetuid: 0/0
    debug1: identity file /var/root/.ssh/identity type -1
    debug1: identity file /var/root/.ssh/id_rsa type -1
    debug1: identity file /var/root/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.7
    debug1: match: OpenSSH_4.7 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.5
    debug2: fd 4 setting O_NONBLOCK
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: SSH2MSGKEXINIT sent
    debug1: SSH2MSGKEXINIT received
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: mac_init: found hmac-md5
    debug1: kex: server->client aes256-cbc hmac-md5 none
    debug2: mac_init: found hmac-md5
    debug1: kex: client->server aes256-cbc hmac-md5 none
    debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<4096<8192) sent
    debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
    debug2: dhgenkey: priv key bits set: 258/512
    debug2: bits set: 2023/4096
    debug1: SSH2MSG_KEX_DH_GEXINIT sent
    debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
    debug3: puthostport: [XX.XX.XX.XX]:1234
    debug3: puthostport: [XX.XX.XX.XX]:1234
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
    IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
    Someone could be eavesdropping on you right now (man-in-the-middle attack)!
    It is also possible that the RSA host key has just been changed.
    The fingerprint for the RSA key sent by the remote host is
    60:c2:3a:(edited):94:8b:d7.
    Please contact your system administrator.
    Add correct host key in /var/root/.ssh/known_hosts to get rid of this message.
    Offending key in /var/root/.ssh/known_hosts:4
    RSA host key for [XX.XX.XX.XX]:1234 has changed and you have requested strict checking.
    Host key verification failed.
    \\ MAN-IN-THE-MIDDLE - CONNECT TO REMOTE HOST #2
    My-Computer:root# ssh -p 1234 -c aes256-cbc -v -v -v [email protected]
    OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
    debug1: Reading configuration data /etc/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to YY.YY.YY.YY [YY.YY.YY.YY] port 1234.
    debug1: Connection established.
    debug1: permanentlysetuid: 0/0
    debug1: identity file /var/root/.ssh/identity type -1
    debug1: identity file /var/root/.ssh/id_rsa type -1
    debug1: identity file /var/root/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.7
    debug1: match: OpenSSH_4.7 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.5
    debug2: fd 4 setting O_NONBLOCK
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: Miscellaneous failure
    No credentials cache found
    debug1: SSH2MSGKEXINIT sent
    debug1: SSH2MSGKEXINIT received
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: aes256-cbc
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit: none,[email protected],zlib
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: kexparsekexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kexparsekexinit: ssh-rsa,ssh-dss
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected] m,hmac-sha1-96,hmac-md5-96
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit: none,[email protected]
    debug2: kexparsekexinit:
    debug2: kexparsekexinit:
    debug2: kexparsekexinit: firstkexfollows 0
    debug2: kexparsekexinit: reserved 0
    debug2: mac_init: found hmac-md5
    debug1: kex: server->client aes256-cbc hmac-md5 none
    debug2: mac_init: found hmac-md5
    debug1: kex: client->server aes256-cbc hmac-md5 none
    debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<4096<8192) sent
    debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
    debug2: dhgenkey: priv key bits set: 276/512
    debug2: bits set: 1982/4096
    debug1: SSH2MSG_KEX_DH_GEXINIT sent
    debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
    debug3: puthostport: [YY.YY.YY.YY]:1234
    debug3: puthostport: [YY.YY.YY.YY]:1234
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    debug3: checkhost_inhostfile: filename /var/root/.ssh/known_hosts
    @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
    IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
    Someone could be eavesdropping on you right now (man-in-the-middle attack)!
    It is also possible that the RSA host key has just been changed.
    The fingerprint for the RSA key sent by the remote host is
    60:c2:3a:(edited):94:8b:d7.
    Please contact your system administrator.
    Add correct host key in /var/root/.ssh/known_hosts to get rid of this message.
    Offending key in /var/root/.ssh/known_hosts:5
    RSA host key for [YY.YY.YY.YY]:1234 has changed and you have requested strict checking.
    Host key verification failed.

  • Trusted Man-in-the-Middle

    Hi,
    I'm trying to build a trusted man-in-the-middle with JSSE and HttpClient .
    My main objective is to implement a proxy in order to control flow over my server.
    Can anyone help me with references, examples, or any other thing?
    I'm new to both technologies, so any help is appreciated!
    Thanks in advance!
    Regards,
    Pedro Lemos

    chiralsoftware.net wrote:
    That one is pretty easy. Make an ordinary SSL connection to the proxy. This connection will be made by the browser itself.
    chiralsoftware.net wrote:
    Then have the proxy make an ordinary SSL connection on to the server.This one I need to do. I understand that.
    chiralsoftware.net wrote:
    Change the DNS records to treat the proxy as the server.When using JSSE, i need to change DNS?
    I'm new to JSSE, but haven't seen any mention to DNS changes...
    chiralsoftware.net wrote:
    Does that make sense? Is that the usage you're looking for?It does makes sense, but not with JSSE usage, I think... correct me if I'm wrong.
    What I'm looking for is an implementation to do it within JSSE framework.

  • Detect attack man in the middle with IDS/IPS

    Hi,
    I have aip-ssm 20, IPS Version 7.0(6)E4
    The ID  signature 7101, 7102, 7104 and 7105 is used for detecting attack arp poison.
    The sensor works as IDS in promiscuous mode. All traffic is fordwared to sensor.
    I have made attack man in the middle with cain & abel but sensor doesn't send alarm. I attach image with signatures.
    Why don't sensor detect attack? The network is in zone inside.
    Can anybody help me, please?

    Did you check if SSM is getting those packets by running "packet display .." command on the sensing interface. In SSM the ARP packets would not be forwarded by ASA to the SSM.
    thx
    Madhu

  • 12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

    Hi guys,
    I have root CA and intermediate CA in ISE local certificate store trusted for client authentication.
    I have imported both root ca and client certificate in the device I want to authenticate, but ISE keeps spitting out this error :
    12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate

    Refer the link for troubleshooting in page no 22 the issue is mentioned, check it: http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_81_troubleshooting_failed_authc.pdf

  • Is FEP 2010 capable of securing computer against the man-in-the-middle attack?

    Hello
    Just would like to know if FEP 2010 is capable of preventing man-in-the-middle attack on computers with it installed?
    Thanks

    It is not the job of FEP or other Anti-Malware product to protect you against man-in-middle attacks, as it is not purpose of design of Anti-Malware. However, some of Man-in-Middle attacks are being blocked by Network Inspection System (NIS), which means
    if FEP detects any malicious package on a network which match signature of NIS , it will block it.
    Browser plays a very important role in blocking Man-in-Middle attack, for example if you use Internet Explorer, you have a better protection against this type of attack, take a look at:
    http://ie.microsoft.com/testdrive/Browser/MixedContent/Default.html

  • Diffie-Hellman Algorithm and Man-in-the-middle attack

    From the RSA Security site, it says that Diffie-Hellman Algorithm
    is susceptable to the Man-in-the-middle attack, because there
    is not mechanism to prove the authenticity of the public keys
    being exchanged.
    Is it true then, the only way to protect against this,
    is the use of a signed certificate?

    or rather, the only way to protect against
    the attack is to authenticate before generating the
    DH secret key.
    signed certificates are one way of authenticating,
    userid/password, hardware token, biometrics are others.
    i guess you could use any of these after looking at
    trade-offs between security/useability.

  • Man in the middle attack!@#$%^&*(?)

    this popped up when i tried to ssh my imac from my macbook pro through our home network:
    @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
    IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
    Someone could be eavesdropping on you right now (man-in-the-middle attack)!
    It is also possible that the RSA host key has just been changed.
    The fingerprint for the RSA key sent by the remote host is
    aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa.
    Please contact your system administrator.
    Add correct host key in /Users/Xelapond/.ssh/known_hosts to get rid of this message.
    Offending key in /Users/Xelapond/.ssh/known_hosts:1
    RSA host key for aaa.aaa.a.a has changed and you have requested strict checking.
    Host key verification failed.
    What do i do?
    Xelapond

    tele_player,
    A lot of ISPs do so in order to create a revenue stream for fixed IP addresses. They rotate addresses so subscribers won't run Web, mail, ftp, etc. servers without paying for the bandwidth use.
    -Wayne

  • Man in the middle

    Guys whats the best defense against Man in the middle attacks???
    for Client Server apps

    What normally prevents a man-in-the-middle attack is a certificate authority such as Verisign. Verisign acts as the trusted third party in an exchange. They certify that the public key you receive was transmitted by the proper sender.
    As an aside, you also have to worry about replay attacks. These can easily be stopped by embedding a timestamp in the encrypted message payload.
    - Saish

  • OpenSSL vulnerability CVE-2014-0224

    My customer want to know whether ASE is affected by the following OpenSSL vulnerability in http://www.openssl.org/news/secadv_20140605.txt
          SSL/TLS MITM vulnerability (CVE-2014-0224),
          DTLS recursion flaw (CVE-2014-0221)
          DTLS invalid fragment vulnerability (CVE-2014-0195)
          SSL_MODE_RELEASE_BUFFERS NULL pointer dereference (CVE-2014-0198)
          SSL_MODE_RELEASE_BUFFERS session injection or denial of service (CVE-2010-5298)
          Anonymous ECDH denial of service (CVE-2014-3470)
    Can you help me to confirm the above question?

    You have clearly double posted this question in two groups.
    So the first question goes back to you.
    Are you Running SAP Applications on ASE, if so this is not the proper group?

  • High Risk on DMP 4400 and 4310 "OpenSSL MITM CVE-2014-0224"

    I cannot find a patch to fix the problem - is there a fix or should I create a TAC case?
    DMM version - 5.3.0
    4310 and 4400 - version 5.4.1

    Here is what I received for the Dell Response to Openssl vulnerability. 
    After a couple of calls to technical support here is what I'm getting for my iDRAC7 getting flagged by Foundstone security scans for the vulnerability CVE-2014-0224:
    " The OPEN SSL package used here contains multiple components, the component that is impacted and vulnerable is not being used, other components in this package are being used but aren't vulnerable".
    "Dell has determined that the products listed in the attached document are not affected by the vulnerabilities.  Some products have leveraged an older (but not vulnerable) OpenSSL module.  These could be flagged by a scanner.  Dell is currently working on updating the modules to a version that will not be flagged for these issues".
    I've also attempted to upload the document, hopefully it can be viewed or downloaded.
    If this post has helped you please rate it. 
    Thanks
    2376.Dell-ResponseOpenSSLSecurityAdvisory_05_June_2014_final.pdf

  • Does the SSL cert vulnerability affect the original iphone? CVE-2011-0228

    The software update for iOS 4.3.5 claims that a patched vulnerability doesn't affect the original iPhone
    Products Affected: iPad, iPod touch (3rd generation), iPhone 4, iPod touch (4th generation), iPhone 3GS, Product Security
    Available for: iOS 3.0 through 4.3.4 for iPhone 3GS and iPhone 4 (GSM), iOS 3.1 through 4.3.4 for iPod touch (3rd generation) and later, iOS 3.2 through 4.3.4 for iPad
    However, the original security advisory which prompted this security update implies that it is affected:
    Version affected:  Versions Prior to 5.0b4, 4.3.5, and 4.2.10
    Can anyone clarify if the original iPhone is affected?

    Hi Ramkumar,
    The report is complaining that the Certificate Authority who signed the ID certificate presented by the ASA used a weak hashing algorithm. First, you need to determine who signed the certificate.
    If the certificate is self-signed by the ASA, you can generate a new certificate and use SHA1 as the hashing algorithm. To do this, the ASA needs to be running a software version that is at least 8.2(4) (8.3 and 8.4 software also support SHA1).
    If the certificate is signed by an external CA, you need to contact them and ask them to sign a new certificate for you using SHA instead of MD5.
    The links you posted have more information on this as well. Hope that helps.
    -Mike

  • How do I reconnect using SSL/TLS security in Dreamweaver using Windows 7?

    I am using an old version of Dreamweaver on Windows 7.  When I try to upload a file, I get a message saying that I need to reconnect using SSL/TLS security mechanisms.  Is this a setting in Dreamweaver or Windows 7?  Thanks for any help or suggestions.

    It sounds like it is a requirement of the server, not Dreamweaver or Windows7
    Dreamweaver, even older versions, can connect using both FTP and SFTP. But SSL/TLS are on the HTTP protocol, not FTP, so I don't understand why you would get such an error using DW file upload.

Maybe you are looking for

  • Facing error while configuring CTS+ in EP 7.3 and Solution Manager 7.1

    Hi All, I have done all configurations settings for CTS+ in Solman( JAVA+ABAP) and SAP EP for non abap transports from EP Dev to EP QA. The Solman version is 7.1 and EP Version is 7.31 . While exporting the transport package from EP Dev system it thr

  • Com.sapportals.portal.prt.service.license.ILicenseService jar

    Hi, Where is the com.sapportals.portal.prt.service.license.ILicenseService jar loacted? Many thanks, Dharmi

  • SQL Developer 4.0 EA2 -- Cannot use OpenLDAP with LDAP connect option

    Hi, I've got OpenLDAP setup to work with my Oracle clients, to serve up TNS connect strings, in lieu of having tnsnames.ora files scattered about hundreds of servers. This is working fine with 10g/11g, both full and instant clients, no problem. Now,

  • Import dialog won't open

    I just upgraded to Lightroom 5 from Lightroom 3, and the import dialog won't open. I can select File -> Import Photos and Video..., and the menu option blinks like it was selected, but nothing else happens. Any ideas? I'm on OS X Mavericks.

  • This is probably old but...

    Alright so i've gotten a new white macbook (MA700) and I am now experiencing the 'whine' that so many people have complained about. This is my 3rd macbook i've tried (the 1st was coming apart and the 2nd one the fan sounded like it was rattling apart