Opposite of getNumericValue

Im building a simple encryption program using unicode for a class and am using turning a character into unicode then using a specific pattern changing the unicode to then replace the old characters to new characters. i know how to convert characters to unicode
getNumericValue
but is the a statement to convert it back or do i have to do something more complicated?
Thanks,

If you are considering only the unicode values for 1 to 0xffff then
char x = some char
int unicodeValue = x & 0xffff;

Similar Messages

Insert /delete data from SAP Z table to Oracle table and opposite

Hi,
Can u help me write this FM from the SAP side?
So, I have two tables ZTABLE in SAP and Oracle table ORAC.
Let's put three columns in each of them, for example
TEL1
TEL2
ADRESS
NAME
where TEL field is primary from ZTABLE to ORAC...
(in FM there shoud be abap code for writing data in ZTABLE after we press some pushbutton made in sap screen painter..)
for example, when we write new record in ZTABLE
00
112233
Street 4
Name1
this data shoud be inserted in Oracle table ORAC.
when we write new record in Oracle table for example
01
445566
New Street
Name2
this data shoud be inserted in ZTABLE.
Field TEL1 can be only of two values 01 or 02, other combination is not valid...
I must have all data from Oracle table ORAC in ZTABLE and opposite.
It should be the same scenario for DELETE...
And this communication should be online between sap and table in oracle database...
Can u help me from sap side? and give idea how to configure on oracle side??
Thanks a lot,
Nihad

I dont know if we can directly connect to a oracle database ( wait for the answers from others on this )
but in XI we have the JDBC adaptor to insert and retrieve data.
so for the outbound from SAP the flow can be something like this (with XI in landscape):
1) You have a screen to maintain a new entry / delete an entry
2) On save , this record gets saved or deleted from the Ztable in SAP
3)) In the same screen you can call a proxy class-method (generated using SPROXY transaction ) to send the record to XI.
4) XI to format it and insert into the oracle table
Mathews

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

Why is "Photos" so awful? iPhoto was simple, intuitive, easy to organize and use. Photos is the opposite of that.

pjonesCET1 wrote:
You can't once installed you can't use iPhoto, anymore in fact I think it is physically removed when you install the 10.10.3 Update.
Incorrect. iPhotos is not removed at all. It can still be used as long as you have kept your Software up to date. Otherwise
Is Iphoto gone ? i want it back!
Pete

PSE 11 New layout - too far the opposite direction?

I have been a long time user of Photoshop Elements, I think since version 2 or 3. I went from 6 to 10 earlier this year and have been working with a Trail version of 11 for a few days now. Overall, I like it, but like so many companies do, when they address a major concern of a large group of customers, they go too far in the opposite direction.
Two major complaints about PSE up through 10 are that it is A) too dark and B) the control icons/text are too small and difficult to see. This is mostly a complaint of the visually impaired. (Which is an interesting side-discussion, given that photography is a visual art).
Although I liked the dark layout, I tended to agre with most users about the latter complaint. The icons and text were difficult to see even for people with good vision. With PSE 11, I see the exact opposite, the layout is too bright for my tastes. After all, the purpose of this software is to work with images. A dark layout lets me focus on the image itself, and not be distracted by the controls.
That much I can adapt to, but the bigger problem is the screen real estate taken up by the Tool Options. It's HUGE! Especially when working with images in a vertical format, which represent a significant percentage of my images. For example I love to play around with vertical panoramas, an often overlooked way to capture a scene such as tall trees, buildings, etc.
I am finding myself constatnly havign to toggle back and forth between the Tool Options bar, and even with the F4 keyboard shortcut, it's a pain in the butt.
So... my opinion is that Adobe fixed a couple big problems for a lot of users but went too far and created a different set of problems for many other users. Anyone have any thoughts on this?
What I'd like to see are some different solutions:
First of all, I'd like to see an option between dark and light layouts. Let users decide. Kinda like making the program skinnable, but not all that many options are needed.
Or... how about an auto-dimming feature? When the mouse is hovered over the image area, while working with the various tools, automatically dim the surrounding panels and menu bars. Then, when you move over the panels and menus, they would return to normal.
Second, find a better solution to the Tool Options bar. Either make it A) moveable, like the other panels, B) resizeable, or C) auto-hide it.
At this point, I've almost decided that the size of that Tool Options Bar is a deal breaker and I won't upgrade. Vertical real estate is hard enough to find on computer monitors and Adobe took up 25% of what little I had. I'll wait for a future version to see if they take it back the other way.

True, and I have that option enabled. Given that I need to use the Tool options, primarily Crop, with different settings on each individual image, I am finding myself opening and closing the options bar constantly. I have two options: have it pop up when I don't want it to, or I have to open it when I want it, then close it afterward. Either way, the resulting workflow is tiresome at best.

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

¿CÓMO CONFIGURO PAGES 5 PARA QUE IMPRIMA EN MARGENES OPUESTOS A AMBOS LADOS DE LA HOJA? // HOW TO CONFIGURE 5 PAGES PRINT MARGINS IN OPPOSITE ON BOTH SIDES OF THE BLADE?

Hola, de preferencia la respuesta en español. Actualicé mi pages '09 a pages 5 recientemente. Por temas de mi trabajo necesito imprimir con márgenes opuestos, pero no logro configurar al pages para que haga eso. Por favor ayuda.
Hello, preferably the answer in Spanish. I upgraded my '09 to pages 5 pages recently. In my work I need to print with opposite margins, but I can not configure the pages to do that. Please help.
Mauricio López Ochoa

Apple eliminado esta característica en Pages 5. Así como más de 100 otros.
Pages '09 deben estar en la carpeta Aplicaciones / iWork.
Utilice eso.
Peter

Peripheral A/B switch indicates opposite of the Active Side

How to fix the problem where the peripheral equpment A/B switches indicate the opposite of the Active Side on the VCO.

If a problem is encountered, particularly after replacing an Alarm Arbiter Card (AAC), where the peripheral equipment A/B selector switch(es) indicate
a selection opposite of which side of the VCO is Active (i.e., VCO A side Active - peripheral A/B switch shows B side selected), it may indicate that Jumper J4 on the AAC is installed incorrectly.
To correct the problem, remove the AAC (this requires turning off the VCO power) and locate Jumper J4 as shown in the figure. Ensure the jumper is positioned near Resistor R31 as shown. When the jumper is in the correct position, reinstall the AAC and apply power to the VCO. The peripheral A/B selector switches should now indicate the same side active as the VCO.

How to get the opposite(not true) of a pattern using Regexp_replace

Hi,
In the following simple sql query....all occurences of 'a' are replaced by the next character...
SQL> select regexp_replace('Palaio Faliro','[a]{1}') from dual;
REGEXP_REPLACE('PALAIOFALIRO',
Plio FliroIs it possible to get the opposite of this pattern... namely except for the 'a' character , all others to be replaced by their next character in the above string....
So , to get....aaa(i think... as only the 'a' character is not going to be replaced...)
Thanks...
Sim

scott> select regexp_replace('Palaio Faliro','[^a]{1}') from dual;
REG
aaa

How to transfer files like music from mac to ipad? tried it using mac but what happen was opposite!

how to transfer files like music from mac to ipad? tried it few times but what happen was the opposite.

If you want to sync your iTunes library on your Mac to your iPad ....
Connect your iPad to the Mac and launch iTunes. Click on your iPad's name on the left side under the devices heading. Then click on the Music tab - and select the music that you want to transfer. Does your iTunes window look like this - with Sync Music checked and the playlists or albums checked as well like in the photo below?
When you click on the apps tab do you have Sync Apps checked and all of the apps in the window below checked to sync as well?
If you select all of the items under the different tabs in iTunes - music, apps, photos. etc. - when you sync - all of the selected content should sync over to the iPad.

I have a problem in iphone4,i am from india and bought a new unlocked iphone4 from USA last month.the problem is when i call someone their is disturbance in the voice and i cant hear the opposite person voice.please inform me how should i overcome this?

I have a problem in iphone4,i am from india and bought a new unlocked iphone4 from USA last month.the problem is when i call someone their is disturbance in the voice and i cant hear the opposite person voice.please inform me how should i overcome this?

There may be a defect in the phone. As you bought it in the US the only place you can get it looked at is in the US.
When you say you bought it new, unlocked did you buy it directly from an Apple store? If you did not it was hacked to unlock it, which could also be your problem. Apple stores are the only place in the US that sells legitimately unlocked iPhones.

HT201394 I have an iPhone 5, updated to iOS 8 and all was great. Updated to iOS 8.0.2 and I lost my cellular connection! Did the complete opposite of what it was supposed to do! HELP!!!

I have the original iPhone 5 (the one released before 5C & 5S) and when I updated to iOS 8 everything was working well and it was great! Last night I updated to iOS 8.0.2 and it does the complete opposite of what it was supposed to do! I lost my cellular connection! It keeps saying "Searching..." in the top left hand corner of my phone where my cellular network is supposed to be. What's going on Apple? Why did I lose my cellular connection when the update was supposed to "fix" lost cellular connections for the iPhone 6. If the update was supposed to fix a higher leveled phone then why was my lower leveled phone affected??? I need answers and I need proper help to deal with this ordeal.

I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
All I get on the signal meter is Verizon 1x. Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So I can't send texts or make phone calls.
This phone worked immediately before the update and stopped working immediately after the update.
My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
Called verizon - was told there were no service outages and then I got transferred to tech team.
Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
Thanks Apple!

My number does not appear on the opposite side.

Hello,
I bought a skype number today. But, my number does not appear on the opposite side. Why is this happening? How do I cancel.
Kind Regards.

i've had my number for some time and ever since this new update, my number is not displayed on the other end or it comes up as 661 or 611 somwething like that. also, people cannot call me on that number for some reason. an answer to this would be nice

Can a batch file be written to check status of Wifi adapter? Then as outcome change it to the opposite current setting?

Hi all,
Is it possible to have a batch file check the status (Enabled/Disabled) of a wireless adapter and as an outcome have it change the adapters setting to the opposite of it's current setting?
i.e. If set as ENABLED, it will disable it as an outcome.
If set as DISABLED, it will enable it as an outcome.
Thanks as this would be extremely useful to overcome a recent problem with Windows 7 not recognising my dads laptop FN key (aeroplane mode).

Hi all,
I've managed to program 2 batch files (one enables and the other disables):
ENABLE WIFI =
@echo off
echo Please wait ... enabling wireless adapter ...
netsh interface set interface "Wireless Network Connection" ENABLE
echo Your wireless network adapter should now be enabled.
timeout/t 10
DISABLE WIFI =
@echo off
echo Please wait ... disabling wireless adapter ...
netsh interface set interface "Wireless Network Connection" DISABLE
echo Your wireless network adapter should now be disabled.
timeout/t 10
These both work perfectly on my Windows 7 laptop. 8)
HOWEVER ... I'd like to code a single batch file which first checks the connect status of the wireless adapter and then through a IF statement sets the opposite outcome to the current status.
I'm not entirely sure how to code this though. :oops:
I know ... netsh interface show interface name="Wireless Network Connection" ... provides the connection status with "Connect State".
What is the syntax I should use to lookup this connect state value?

When I print a document with Arabic script in In Design the characters appear in an inverted form, in the opposite direction, while the printer doesn't do this with other software such as Word

When I print a document with Arabic script in In Design the characters appear in an inverted form, in the opposite direction, while the printer doesn't do this with other software such as Word

(The small field at the top of questions is to type just a title; the large field is to type your full question in, along with anything else that may help us help you.)
When you say "print", do you mean the text is correct in your InDesign file? If you export the document to a PDF, is it still correct? Final test: if you print the PDF to your printer (making sure you use the same driver and setting), is it wrong? Then it's your printer driver, trying to be smart when it should not. Locate a Settings dialog where you can switch off options such as this one. Were I a betting person, I'd tell you to look for something called "Auto-correct mirrored documents".

Calendar sync problem - opposite of everyone else!!!

Hello everyone.
I have recently upgraded my device and my DM. I know have a problem that seems to be the exact opposite of the one everyone has...!
Since upgrading my DM to 6.1.0.36, when I sync with Outlook it transfers to Outlook all the appointments I have in the mobile associated with my personal account (btw: small office, only BIS). As on the device I have two emails (work and personal), I was more than happy to keep my personal calendar items out of the exchange calendar...! Now they all go in with the work items and they aren't even marked with a different colour! Obiously I checked the CICAL settings, and the main account is the work email, as it always was.
Since the first 8110, through the 8300, 9800, and now the 9900, it has always been like I described, and now something has changed...!!!
Can someone help me please???
Thank you all very much!
L

I have the same issue. The e-mail address selected for CICAL or, for that matter, Contact List (SYNC) which are the "alternate" calendars, are seemingly ignored during the sync and, sync the "standard" calendar. Even when I designate a secondary folder on the OUTLOOK side to match up to the alternate calendar, the sync wants to take the "standard" calendar from OUTLOOK.
TORCH 9850 on VZWs most current software release, OUTLOOK 2003, all updates applied, and the Desktop Manager noted above. btw, My "alternate" e-mail & contact book are gmail's.
I look forward to a solution.

Opposite of getNumericValue

Similar Messages

Maybe you are looking for