Optical digital audio output for mac book?

Hello, I am wondering if MacBook pro Retina version has the Optical digital audio output or thunderbolt adapter? so i can use optical cable to do output for my music.

Hi alece,
Just to clarify something;
When using an optical cable there are several standards of audio that can pass through the cable:
S/PDIF - a stereo signal - http://en.wikipedia.org/wiki/Spdif
AC3 or Dolby Digital - up to 5.1 surround - http://en.wikipedia.org/wiki/Ac3
Dolby Digital Plus - up to 7.1 surround - http://en.wikipedia.org/wiki/DolbyDigitalPlus
ADAT Optical - up to 8 channels of audio - http://en.wikipedia.org/wiki/ADAT_Lightpipe
MADI - up to 64 channels of audio - http://en.wikipedia.org/wiki/MADI
I´m sure other people can add more to the list if they want to, my point is that these signals can pass through the exact same kind of optical cable.
The important bit to know is what does your equipment and software support... in theory your question is quite logical, a software can play 5.1 surround to a optical output like Apple DVD Player does with the built-in sound card of a modern mac. However, Logic does not support live encoding of AC3. That is why you have to output the surround mix in Logic to a sound card with at least 6 channels (5+1 as in 5.1) connected to your speaker system. Typically this would be 5 active studio monitors plus a sub. If you were thinking to use an existing stereo I would not recommend it since most consumer speakers have no limiters to protect them from damage (but may be possible depending on your amplifiers inputs)
I hope this answered your question
Cheers Espen
http://www.midiamore.com.au/

Similar Messages

  • Using built in optical digital audio output for 5.1

    So, lets say i want to mix something in 5.1 using logic or soundtrack pro, can i use the optical digital audio output of my macbook to send the signal to a home theather or something to mix it?, or i need a special hardware card for this?
    Thanks a lot!!

    Hi alece,
    Just to clarify something;
    When using an optical cable there are several standards of audio that can pass through the cable:
    S/PDIF - a stereo signal - http://en.wikipedia.org/wiki/Spdif
    AC3 or Dolby Digital - up to 5.1 surround - http://en.wikipedia.org/wiki/Ac3
    Dolby Digital Plus - up to 7.1 surround - http://en.wikipedia.org/wiki/DolbyDigitalPlus
    ADAT Optical - up to 8 channels of audio - http://en.wikipedia.org/wiki/ADAT_Lightpipe
    MADI - up to 64 channels of audio - http://en.wikipedia.org/wiki/MADI
    I´m sure other people can add more to the list if they want to, my point is that these signals can pass through the exact same kind of optical cable.
    The important bit to know is what does your equipment and software support... in theory your question is quite logical, a software can play 5.1 surround to a optical output like Apple DVD Player does with the built-in sound card of a modern mac. However, Logic does not support live encoding of AC3. That is why you have to output the surround mix in Logic to a sound card with at least 6 channels (5+1 as in 5.1) connected to your speaker system. Typically this would be 5 active studio monitors plus a sub. If you were thinking to use an existing stereo I would not recommend it since most consumer speakers have no limiters to protect them from damage (but may be possible depending on your amplifiers inputs)
    I hope this answered your question
    Cheers Espen
    http://www.midiamore.com.au/

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Combined optical digital audio output/headphone out

    What is the "combined optical digital audio output/headphone out"? This is what the output is called that has the earphone picture beside it on my MacBook. I thought this meant that it could take the mini jack out that splits into a/v - yellow, white, red, and plug it into any tv or monitor that has those inputs. I tried it just now, but a no go.
    If the only way to get video is through the mini DVI output what does the "Combined optical digital audio output/headphone out" mean? If I can get video out of it, how can I do it?
    Thanks!

    Hi Trevor Deck: As you have discovered this does not output as a video signal. That jack is strictly for audio. The "optical" portion of it is used to output using a "Toslink" cable to provide "optical audio" to an external amplifier. The DVI port needs to be used to get a video signal to your TV. But be warned if you use the red, white, & yellow method of hooking up the video signal you will probably be disappointed. If your TV has a HDMI or PC input it would be much better. You would then have to get the proper DVI to whatever type adapter.
    Good Luck
    Stedman
    MBP 1.83, 1.5gB RAM   Mac OS X (10.4.9)   Quiet, Cool, Re-furbished, iPod mini, iPod shuffle

  • Optical digital audio output/headphone out

    Does anyone know if there is a way to connect stereo speakers directly (not through a receiver/amp)to the Optical digital audio output/headphone out on a imac? The new 20 inch imacs have a 24watt internal amp which would be plenty for the speakers that I want it to drive. Thanks

    is there an attachment that i have to buy? do i just rip the tip of the cord off?
    Yep, there are two "standard" optical-digital-audio connectors -- the original "square" one is still used in most larger audio/video components. The newer/smaller one, used mainly in portable gear, is exactly the same size as a mini headphone plug. Radio Shack carries adapters/converters and cables of both types (usually at outrageously high prices). For online vendors, try:
    http://monoprice.com (search for "TOSLINK")
    Great prices and a good rep for quality/service among to the HDTV-fanatics on avsforum.com.
    Looby

  • Combined optical digital audio output/analog line out

    Combined optical digital audio output/analog line out minijack on the new Mac Pro support 5.1?

    Are you asking if it has that?
    http://www.apple.com/mac-pro/specs/
    says:
    Combined optical digital audio output/analog line out minijack
    Which means it does.
    On all but the earlier Mac Pro models, this has been standard since the iMac G5.
    Mac Pros earlier used SPDIF.
    These are now mini-Toslink.

  • Optical digital audio output (minijack)?

    I am confused on the whole optical digital output thing since it is sharing the same port with analog. Can someone point me to some good digital speakers with the whole optical digital audio output (minijack)thing

    See this user tip:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=2458613

  • Optical/Digital Audio Output from MacBook

    So I am interested in hooking up my MacBook to my HDTV so I can watch movies with it. I know for video I need to get a mini-DV to HDMI cable. That's easy. But what about audio? I would ideally like to have playback in surround sound. I have read that the headphone audio output also doubles as an optical output. Is this true? If so what cable can I buy and will it output surround sound from a DVD movie?

    Yes, the audio port doubles as an optical in and output. You will need a optical cable from your macbook to your sound system to have surround sound/dolby digital, and when you play the dvd it should automatically convert the output to a digital signal. I have this setup on my iMac and Macbook. I have the logitech Z680 (now Z-5500), and when I play a DVD, the screen on the controller says 'digital'.
    The cable you'll need is a optical audio cable 3.5mm (for the macbook) to a toslink (square shaped with two corners tapered). You can buy cables which are toslink to toslink that come with adaptors for 3.5mm jacks.
    Message was edited by: Josh118

  • Digital Audio output for W series - Alternatives

    There's a thread talking about the displayport does not have audio-output.  Its true and some people get victimized by ill-trained sales people who think their displayport is standard.  There's no literature on Lenovo website warning users about the audio issue either - such thread is closed with the fact that (some) other manufacturers in the same period does have have audio either and Lenovo think they should be in the same boat.
    Let's not go into the blamish again, but discuss what we can do with existing options with alternative digital audio out and line-in that the W series really really missed.
    We have (1) mini-dock and (2) USB soundcard listed as options
    I currently use a USB DAC (digital to analog) system and it do really good in terms of stereo music enjoyment.  However my particular system does not have digital manupilated sound like 3-D surround or multi-channel output and not suprisely, laptop USB generally produce greater latency than desktop USB ports.
    Besides USB, we have 1394 and express card 34 as expansion options.
    What's your setup for digital audio out?  Anyone know any internal soundcard that fits the slots of Wireless USB/Turbo memory PCI ports that all W-series have?

    Other alternatives include
    I know on mackbooks I've seen firewire used as an input for a Weiss Dac if you're into two channel audio.  Do any reiceivers take firewire as an input for hometheater?  Has anyone tested Firewire outputs on their W series?  I'm told that firewire is sometimes preferable to USB, I'm not sure why this would be, can USB support passthrough of DTS encoded signals?
    In the case that firewire works and you Do not have a firewire source, maybe something like this would be of value  It converts firewire to digital coaxial s/pdif and allows passthrough of DTS and AC3.
    http://www.m-audio.com/images/global/manuals/FireWire-Audiophile_Manual.pdf
    As I'm into audio the critical thing here (and what you're paying for when you purchase blue-ray, is maintaining the digital information from the disk in an unconverted form.  You want a direct bit pass through, and you want as little jitter introduced to the signal as possible.  You most certainly don't want the sound card getting in the way, Digtital to Analog converting and then reverse packaging it up and putting it out over the soundcard digital out.  My problem is I'm not familiar enough with computer audio to know how exactly the sounds is transmitted from your blue ray drive to the digital interface you've chosen.
    Anyone know why USB digital out would not be a prefered method?
    Moderator note; comment removed which contravened forum rules

  • How to turn on/off S/PDIF Optical Digital Audio Output manually?

    My sound card seems to be meesing up. It switches back an forth from "Internal Speakers" or "Headpohones" to "Digital Output". For some reason the optical source keeps getting flipped on and is really annoying. I tried blowing out dust to see if that was causeing the comptuer's confusion, but that didn't work. Until I can make time to go to the apple store, is there anyway for me to turn off that certain connection through terminal commands or something?
    Thanks

    I have the same problem also on 10.6.8 on a macbook pro (circa 2010).  You will find an earlier thread on this issue (but frustratingly few answers for me at least) here: https://discussions.apple.com/thread/2762646?start=15&tstart=0

  • Optical digital audio output

    What is this. I was expecting a fiber optic audio out/in. So when I got my iMac c2d I was confused.

    Hi!
    I'm using a Sony MD (minidisc) recorder (not a mobile device) which offers optical cable output. My plan was to record this signal using Garage Band. Well, I can't hear anything (although using a optical fiber cable connected to the 24''-iMac via TOS-Link adapter) - you can imagine the recording results...
    Any solution found so far?
    Sebastian
    iMac 24, 2GB Ram, 500 GB HDD, 2,16 GHz   Mac OS X (10.4.8)  

  • Combined optical digital audio port

    Combined optical digital audio input/audio line in (minijack)
    Combined optical digital audio output/headphone out (minijack)
    Dumb Question but what exactly does this mean, what types of connections does this port take? only headphone jack?

    It is a jack that does both standard analog, and optical digital, on the one connection.
    You can plug in a standard mini-headphone (1/8") like most iPod/music devices use, including 1/8" to two cable Y adapters for plugging into stereos, etc.
    You can also buy a funky adapter that looks like a standard mini-headphone adapter, but it is plastic and has an optical jack on the back where the cable would usually be. This allows you to connect the MB digitally to any equipment (like a home stereo receiver) that accepts optical input, or plug things like CD players, DVD players, etc. into the MB's input. If you check out the online Apple Store, they sell a Belkin kit that has the adapter with a short optical cable and they have a picture so you can see an example.

  • How to get the Mac Mini Digital Audio output at 192kHz?

    I have a mid 2011 Mac Mini (and love it). According to http://support.apple.com/kb/HT4806, "The headphone / line output port accommodates digital optical audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate and supporting encoded digital audio output (AC3 and DTS)."
    So there is digital audio output to 192 kHz but how do you configure it to work? Using the Audio Midi Setup Utility, I can set the sample rate to 96000 Hz -- but it won't go higher to 192kHz. Anyone know how to do this?

    That is in some ways confusing.  For the analog output, the
    internal DAC can support 24 bit/192Khz audio data.  It does
    require an application that has the capability of playing back
    such material.
    The TOSLINK optical standard does not support this data rate.
    It has nothing to do with the Mini, it is the standard itself.  The
    TOSLINK optical spec is 96 kHz, 24 bit stereo (uncompressed).
    The mini will however support multichannel, 24 bit, 192 kHz
    (uncompressed) via the HDMI interface.  Also, again,
    the playback software needs to support it.
    Just as a final note, unless the source material has the
    higher sample rate format, there is no benifit to outputing
    at the higher sample rate, especially if the source some
    lossy comporessed format (mp3, aac, Dollby and DTS
    non-HD formats).

  • Optical Digital audio - No output control

    I'm trying to use the optical audio output on my late 2006 Mac Pro 1,1 (A1186), but no audio signal is received by my Sony audio amplifier even though the "Optical digital audio out" port and my TOSLINK cable show a red glow,
    System Preferences says: "The selected device has no output controls." That same message has been displayed for Sound > Digital Out ever since my Mac was new, but this is the first time I've wanted to use that sound output.
    Did my Mac Pro come with the needed controls? If "yes," how do I activate them? If "no," where can I obtain them?
    Thanks for any help or suggestions!
    Don

    yep-try looking under system preferences-->sound--or fire up Audio Midi Setup and see if you can get it switched over that way.  Dunno about your reciever. You may have to switch it over to digital on that input. I'll turn it over to someone more capable than me at the moment. Gotta go
    John B

  • How do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    how do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
    ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. 

Maybe you are looking for