Optional Prompt for Date type parameter in Crystal Report.

Hi Every One,
I have a date type parameter in crystal report.When I am convert it to optional prompt it is showing following message.
But the Type field is gray out when I was selecting list of values Dynamic.
Please suggest.
Thanks and Regards
DEV

Hi,
Please check SAP note:
1710595 - CR_Defining "Optional Prompt" as True for SAP Crystal
Reports Does Not Work
Thanks & Regards,
Nagarajan

Similar Messages

Calendar prompt for Date variable from bex

Hi All,
I have a Bex query where I have a variable on 0CALDAY
- Customer exit (i_step = 1 to populate with current date)
- Single value
- Mandatory
I created universe on this query and in webI selection screen i do see the variable prompt.
I am not able to see the current date populated automatically since exit values are not populated to WebI at runtime.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly.
I am currently on BO XI 3.1 SP3.
Is there any specific setting in Universe or bex query which is required to get this Calendar prompt instead of list of values for dates?
Note: When we were on SP1 the universe created then had same variable from bex and it still shows us Calendar prompt but ever since we upgraded to SP3 for the query splitter functionality we not able to get the calendar prompt for date variable in new universe we create
Thanks
Ritesh

Yep.
Now tell me how you want to show that Prompt @ WebI report level.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly. Exactly, i didn't get this??
@Prompt:
You have flexibility to show options like:
Mono/Multi: User can select Single value or Multiple.
BW Variable: Same we have (Single/Multiple)
Free/Constrained: User can Enter his/her value directly or No change option.
BW Variable: By defalut you will get this, once you made it to Optional input.
Persistent/Not_Persistent: Refreshed report has to show last selected value means use Persistent otherwise Not_P.
By seeing the Prompt syntax , I can say your Variable is after Customer Exit, Correct??
Workaround for your Problem is:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A','Date\LovDate (Previous Day)Base',mono,primary_key)"/></CONDITION></FILTER>
You have to remove that Date class and objects from prompt syntax. Because of that it showing up LOV's not calendar.
Like:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A',',mono,primary_key)"/></CONDITION></FILTER>
Why, It should be blank??
Because Date needs no class\object to show up, by default you will get Calendar on the fly.
Hope you got my point.
Thank You!!

Clues about query's - Search for date type at INBOX

Hello Everyone,
At IC Webclient, does anyone experiment to add a new search date type at INBOX, at "search for date" search parameter?
I added a new date type at Date Management, ZDATA_PR.
When I try to assemble the query parts, I use something like this:
CL CL_CRM_QUERYAUI_RUN_BTIL
METH READ_BUSINESS_TRANSACTIONS
CALL METHOD cl_crm_report_qupart=>get_qupart_by_token
    EXPORTING
      iv_token     = 'DAT'
      iv_date_type = 'ZDATA_PAR'
      iv_from      = ls_query_aui-from
      iv_to        = ls_query_aui-to
    IMPORTING
      ev_qupart    = ls_qupart_range-querypart.
APPEND ls_qupart_and   TO lt_query.
APPEND ls_qupart_range TO lt_query.
However, I'm rewarded with an error message telling me that I have problems with the query.
Does anyone can give me clues how to perform this action? I'm clueless and there's not almost no information about this...
Thanks and Kind Regards
Bruno Garcia

Just to solve a mistake at example code:
CALL METHOD cl_crm_report_qupart=>get_qupart_by_token
EXPORTING
iv_token = 'DAT'
iv_date_type = 'ZDATA_PR'
iv_from = ls_query_aui-from
iv_to = ls_query_aui-to
IMPORTING
ev_qupart = ls_qupart_range-querypart.
APPEND ls_qupart_and TO lt_query.
APPEND ls_qupart_range TO lt_query.
does anyone has a suggestion or a clue to give?
Thanks
Bruno

Domain for data type in Oracle 8i database

Hi Sir,
Does Oracle database supports domain creation for data type.
for example, can I create a domain called shorttext which is VARCHAR2(50). Then when I specify a data type for a column in table, then I just declare the column as domain.
eg. address SHORTTEXT;
--where SHORTTEXT is a domain.
How is this implemented in Oracle database and supported by front end tools like Oracle Developer 6.0.
Hope someone can provide some clear explanation on this.
Thanks.

The ordimagesignature is not something you can see or hear. It is strictly binary metadata about the image, used only to compare images to each other.
What are you trying to do?
Larry

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

[Q] Using viewCriteria for Date type

To Query data, I used ViewCriteria.
But it works well for Varchar2, Number type.
But it does not work for Date type.
for example
If I set variables like the below, it works,
attrName = "OrdName";
attrValue = "Nick";
But, If I set variables like the below, it does not work
attrName = "AppDate";
attrValue = "04.5.12";
ViewCriteria vc = order.createViewCriteria();
ViewCriteriaRow vcr = vc.createViewCriteriaRow();
vcr.setAttribute(attrName, attrValue);
vc.addElement(vcr);
order.applyViewCriteria(vc);
order.executeQuery();
Can I solve this problem ?

using a custom expression in the view criteria, ex.
vcr.setAttribute("DateField", "LIKE TO_DATE('" + dateField.toString() + "', 'yyyy-mm-dd')");
similarly, you can use other expressions to remove the default BC4J problems w/ dates (>, <, between) - At least I know you can't use = to get it to work right.
The default handling of BC4J is to say = TO_DATE(whatever you put in the value portion) where it needs to be LIKE to work properly - for some reason - probably a patch is available for it.

Conversion Exit for data type FLTP

Can someone suggest me a conversion Exit for data type FLTP?

Hi,
CHAR_FLTP_CONVERSION
FLTP_CHAR_CONVERSION
Have a look at the function module documentation.
Regards,
Reema.
PS. pl. award points to useful answers.

[Access 2010] Change default formats for data types

Whenever I import data, the default format for Boolean data types is "-1,0." I know how to subsequently change this format to "Yes/No," but I'd like to change the default
setting to "Yes/No." Is this possible?
Thanks in advance.

Hi,
I found you post the same question in other place and got the advice. I agree with Mr. Kees suggestion. The data type is a build-in default setting with Access, we can't change it. We may try the workaround via VBA to test.
http://forums.cnet.com/7723-6129_102-627633/access-2010-change-default-formats-for-data-types/#message5617496
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Have a good time.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Javadoc for a type parameter

Is it possible to specify the documentation for a type parameter? I vaguely remember someone saying this would be the case and the evaluation for Bug 4421066 indicates that it has at least been considered.
* @param T blah blah blah
class Wrapper<T> {
}

Clearly not awake yet...
@param <T> blah blah...works fine. Excellent.
Mark

DateTime Parameter in Crystal Report

hi,
in one of my crystal reports i'm invoking a procedure which has begin date and end date as parameters.when trying to run the report it's prompting for both date and time. my requirement is just to prompt for date and time is not required. the option of editing the parameter at the report level has been disabled since the parameters dierctly get invoked form procedure , in which i've declared the datatype as
samp_proc(p_begin_date date,p_end_date date,p_ref_cursor in out).
can someone help me on this.
Thanks,
Sailaja.k

Hi Sailaja,
I'm not sure if this is a known issue or if this a bug, but there are workarounds.
Create a blank report and Insert the original report as a Subreport. Now in the Main report, create a Sttaic parameter of 'Date' type. Create a new Formula called 'Date_conv' and type this:
Datetime({?Date_parameter})
Place this formula on the Report Header and place the subreport on the Report Header too.
Right-click the subreport and select Change Subrpeort Links. Select the formula and move it to the Links to area. Next, from the drop-down on the bottom left select the datetime parameter of the subreport.
You may suppress all the other sections of the main report. The Report should now prompt for a 'Date' instead of the Date time.
Another workaround is by creating a registry key called useDateInsteadOfDateTime. Browse to HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions and create a string value called useDateInsteadOfDateTime. Set its value as the Database Server Name or the ODBC DSN name.
I would still recommend using the 1st workaround.
Hope this helps!
-Abhilash

How to use Dynamic cascading parameter in crystal Report XI ?

Hi,
I want to use Dynamic cascading parameter in crystal Report XI which is to be viewed through the infoview without using the Business View.Is it possible?
I could implemented Dynamic cascading parameter using the CR XI developer without using Business View, but cannot view the report when uploaded it to BOXI, through infoview.
Please suggest..
Thanks in advance..
Rajneesh

In the crystal reports field explorer>right click on parameter field>create new-->name the parameter field and select the type as dynamic. Now in the value field click the row and add the database field also add another field below that by clicking on the next row so..on. The order should be like this parent field first and then child field next...... Also click on the last column to add parmater for each level.
Regards,
Raghavendra

Passing single/multiple values to stored proc parameter from crystal report

I tried below solution posted on this forum to pass either a single value or multi-value to a sql server stored procedure parameter (varchar datatype) from crystal report XI R2.
In my crystal report , I am displaying all the available parameter values to the user and the user will select either a single value or multi value.
This worked when I select single value and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1')}
But this did not worked when I selected multiple values and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1,Product 2')}
I think it might work if it is as below:*
For multiple values:
{CALL "xyz"."dbo"."storedprocedurename";1('Product 1', 'Product 2')}
Please advise.
Solution Posted on this forum is as follows:
Hi,
As you must be aware of that a crystal report created of a stored procedure will allow only a single value for inserting a multiple value as a parameter in your report and pass those values to your stored procedure please follow the below work around which will be helpful for you.
Symptom
In Crystal Reports, you want to pass a multi-value parameter to a stored procedure. The problem with doing so is that Crystal Reports considers the multi-value parameter to be an array.
How can you pass a multi-value parameter to a stored procedure?
Resolution
Here are the steps to pass a multi-value parameter to a stored procedure:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Regards,
Vinay

Hi Vinay,
First you need to make sure the stored procedure accepts multiple values in the fashion 'a','b','c'.
Then, create this formula in the Main Report:
numbervar i;
stringvar s;
for i:= 1 to ubound({?Parameter}) do
s := s + "'" + {?Parameter}<i> + "'" + ",";
left(s,len(s)-1);
Link this formula to the sub-report's parameter.
Hope this helps!
-Abhilash

How to make Start Date as optional parameter in Crystal reports 2011

Hi All,
I have existing Start Date and End Date parameter how to make them as optional parameters.
Thanks for your help in advance!!.

Hi Mnnica,
There is an option 'Optional Prompt' under value options, make that as true. Do the same for both startdate and enddate then go in Record Selection Formula and write below formula :
If Not (hasvalue({?Startdate}) then True else {?Startdate} >= {databasedatefield}
and
If Not (hasvalue({?Enddate}) then True else {?Enddate} <= {databasedatefield}
Check below screen capture for Optional Prompt options :
-Sastry

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Date / Date Time" type parameters in crystal reports 2008

i am using parameters in crystal report to select records. one of the parameters is "From Date" of type Date Time.
i mapped this parameter to a field "DateIn" of type smalldatetime in my sql table.
Now, when i open the report it asks for "From Date" but b y default it sets the time to current time so i have to change it to 00:00:00 manually. i want it to show 00:00:00 by default. which means i don't want time here.
For this if i select the datatype of parameter "From Date" as Date only then i am not able to map it to the "DateIn" field of the sql table.
Please help me out of this.
Edited by: rohit0825 on Jun 2, 2010 2:25 PM

>
Deepravs wrote:
> Hi Rohit,
>
> Change the Parameter to Date Datatype and use this formula in the "Record Selection Formula " (Report Tab -> Selection Formulas -> Record)
>
> = CDateTime ({?From Date})
>
> Though the parameter is date datatype it converts to datetime datatype amd maps to the desired column.
>
>
> Thanks,
Great !!!
this is working.
i found another way, i changed the datatype of parameter to Date and click ok and everything was good, it doesn't require any conversion to date time.
Thank You so much. All Points You.
Edited by: rohit0825 on Jun 3, 2010 10:47 AM

Optional Prompt for Date type parameter in Crystal Report.

Similar Messages

Maybe you are looking for