Javadoc for a type parameter

Is it possible to specify the documentation for a type parameter? I vaguely remember someone saying this would be the case and the evaluation for Bug 4421066 indicates that it has at least been considered.
* @param T  blah blah blah
class Wrapper<T> {
}

Clearly not awake yet...
@param <T> blah blah...works fine. Excellent.
Mark

Similar Messages

  • Optional Prompt for Date type parameter in Crystal Report.

    Hi Every One,
    I have a date type parameter in crystal report.When I am convert it to optional prompt it is showing following message.
    But the Type field is gray out when I was selecting list of values Dynamic.
    Please suggest.
    Thanks and Regards
    DEV

    Hi,
    Please check SAP note:
    1710595 - CR_Defining "Optional Prompt" as True for SAP Crystal
    Reports Does Not Work
    Thanks & Regards,
    Nagarajan

  • Maintain archiving parameter(s) for output type RD00(appl.V3)

    Hi Guys,
                 While trying to get the output for billing documents I'm facing a error : Maintain archiving parameter(s) for output type RD00 (appl.V3)
    Diagnosis
    At the time of output determination,the archiving parameters for output type RD00(application V3) were incorrectly maintained in customizing.
    Additional information:
    SAP object:
    Archiving object:
    Procedure
    Maintain the archiving parameters and repeat output determination for the required document.
    Expecting the solution.
    Regards
    Raj.

    Can you check what you have in the Storage System Tab in the fields Storage Mode and Document Type.
    It should be Print Only and SDOINVOICE respectively.
    Thanks

  • [svn:fx-trunk] 15779: * Package and class level javadoc for the flex2. compiler.mxml package

    Revision: 15779
    Revision: 15779
    Author:   [email protected]
    Date:     2010-04-27 20:19:48 -0700 (Tue, 27 Apr 2010)
    Log Message:
    Package and class level javadoc for the flex2.compiler.mxml package
      and subpackages.
    QE notes:
    Doc notes:
    Bugs:
    Reviewer: Corey (post commit)
    Tests run: checkintests
    Is noteworthy for integration: NO
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/AbstractGenerator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationGenerator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceGenerator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InvalidStateAttributeUsage.j ava
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InvalidStateSpecificValue.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/MXMLNamespaces.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/MxmlCompiler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/HTTPServiceAnalyzer .java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/RemoteObjectAnalyze r.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/SyntaxAnalyzer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/WebServiceAnalyzer. java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AnonymousObjectGraph Builder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ArrayBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/HTTPServiceBuilder.j ava
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/InlineComponentBuild er.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ModelBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/PrimitiveBuilder.jav a
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/RemoteObjectBuilder. java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ServiceRequestBuilde r.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/VectorBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/WebServiceBuilder.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/XMLListBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/Analyzer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/AnalyzerAdapter.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ArgumentsNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ArrayNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/BindingNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/BooleanNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/CDATANode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ClassNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/DeclarationsNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/DefinitionNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/DesignLayerNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/DocumentNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/FunctionNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/HTTPServiceNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/InlineComponentNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/IntNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/LayeredNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/LibraryNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/MetaDataNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/MethodNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ModelNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/Node.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/NumberNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/OperationNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/PrimitiveNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/PrivateNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/RemoteObjectNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ReparentNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/RequestNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/ScriptNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/StateNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/StringNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/StyleNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/SyntaxTreeBuilder.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/UIntNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/VectorNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/WebServiceNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/XMLListNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/XMLNode.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/XercesClassLoader.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/CodeFragmentList.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/DescriptorGenerator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/StatesGenerator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/TextGen.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/VelocityUtil.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/AttributeHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/BindingHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/ChildNodeHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/DeclarationHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/FrameworkDefs.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/NodeTypeResolver.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/TextParser.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/TypeCompatibility.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/ValueNodeHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Assignable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Deprecated.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/DynamicProperty.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Effect.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/ElementTypeNotFound. java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Event.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Inspectable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Property.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Style.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Type.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Array.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/BindingExpression.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/DocumentInfo.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/EventHandler.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/LineNumberMapped.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Method.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Model.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MovieClip.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Operation.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/StatesModel.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/VariableDeclaration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Vector.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/InitializedProperty Declaration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/PropertyDeclaration .java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/UninitializedProper tyDeclaration.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/ArrayElementInitial izer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/DynamicPropertyInit ializer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/EffectInitializer.j ava
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/EventInitializer.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/Initializer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/NamedInitializer.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/StaticPropertyIniti alizer.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/StyleInitializer.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/ValueInitializer.ja va
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/VisualChildInitiali zer.java
    Added Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/analyzer/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/gen/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/decl/package.html
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/init/package.html
    Removed Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/Parameter.java

  • A question about a method with generic bounded type parameter

    Hello everybody,
    Sorry, if I ask a question which seems basic, but
    I'm new to generic types. My problem is about a method
    with a bounded type parameter. Consider the following
    situation:
    abstract class A{     }
    class B extends A{     }
    abstract class C
         public abstract <T extends A>  T  someMethod();
    public class Test extends C
         public <T extends A>  T  someMethod()
              return new B();
    }What I want to do inside the method someMethod in the class Test, is to
    return an instance of the class B.
    Normally, I'm supposed to be able to do that, because an instance of
    B is also an instance of A (because B extends A).
    However I cannot compile this program, and here is the error message:
    Test.java:16: incompatible types
    found   : B
    required: T
                    return new B();
                           ^
    1 errorany idea?
    many thanks,

    Hello again,
    First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
    and I understood that in fact, as spoon_ says the only returned value can be null.
    I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
    I have been working with cryptography API Core in Java. I understood that there are classes and
    interfaces for defining keys and key factories specification, such as KeySpec (interface) and
    KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
    understand them better. So I created a class implementing the interface KeySpec, following by a
    corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
    compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
    for my classes, I saw for the first time this strange method header:
    protected abstract <T extends KeySpec> T engineGetKeySpec
    (Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
    in order to not to open a complicated security discussion but just to explain the ambiguous
    part for me, that is, the use of T generic parameter.
    The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
    providers, the possibility to implement cryptography services and algorithms according to a given
    RFC (or whatever technical document). The methods in this class are invoked inside the
    KeyFactory class (If you have installed the JDK sources provided by Sun, You can
    verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
    key specification, that is, a class that implements the interface KeySpec and this class is often
    defined by the provider and not Sun.
    stefan.schulz wrote:
    >
    If you define the method to return some bound T that extends A, you cannot
    return a B, because T would be declared externally at invocation time.
    The definition of T as is does not make sense at all.>
    He is absolutely right about that, but the problem is, as I said, here we are
    talking about the implementation and not the invocation. The implementation is done
    by the provider whereas the invocation is done by Sun in the class KeyFactory.
    So there are completely separated.
    Therefore I wonder, how a provider can finally impelment this method??
    Besides, dannyyates wrote
    >
    Find whoever wrote the signature and shoot them. Then rewrite their code.
    Actually, before you shoot them, ask them what they were trying to achieve that
    is different from my first suggestion!
    >
    As I said, I didn't choose this method header and I'm completely agree
    with your suggestion, the following method header will do the job very well
    protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
    throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
    in this method header definition.
    Once agin, thanks a lot for the answers.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to pass multiple MDX values for a single parameter into a drill-through report?

    I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so!  I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD.  Depending on which link the
    user selects, the report simply calls itself and needs to pass in the parameter value for Active week.  If it's active week, the parameter value will simply be "true".  If it's YTD, the parameter value needs to be both "True" and "False" so the current
    week's data is accounted for as well.  I've set everything up except for the final step, and I have no idea what to type into the Value field below.  I've tried different things: false, as you see below (it errors saying I'm missing the parameter
    value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value).  Nothing is working.
    So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

    I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
    To answer your initial questions, you are correct with both your assumptions:
    1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
    2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
    So in following your instructions, well that's the problem I'm not quite following :)
    1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden?  If so, I've done this.
    2) I'm not quite sure where to use the statement you provided me.  You said to put it in the dataset, but I don't know which dataset.  I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
    as a parameter).  If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties.  I tried this, and it did not generate any errors, but it also kept my report groups from displaying
    -- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
    I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there.  When I did this and ran the report, I would get the following error:
    The 'SchoolDaysActiveWeek' parameter is missing a value
    So what am I missing!? 
    Also, thanks for taking the time to respond!!

  • SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

    Hi,
    I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
    PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
    "processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
    report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
    Default' to data type int."
    My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
    Troubleshooting performed:
    1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
    reporting started throwing errors again.
    2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
    3. re-registered the SQL management Provider WMI class.
    mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

    Hi All,
    Finally found exact solution to the reporting error.
    Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
    It may already have been terminated. (rsRuntimeErrorInExpression)"
    Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
    primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
    Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
    Reporting Services Point in SCCM Primary Site, and then click apply.
    Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

  • Value has to be entered for an optional parameter for WS

    Hi,
    I have created a webservice from a PL/SQL package using the below tutorial.
    http://st-curriculum.oracle.com/obe/jdev/obe1013jdev/10131/wsfromplsqlpackage/devwsfrom%20plsql.htm
    I wrote my package to get the user status from fnd_user table. The package/procedure cannot get simpler than this. There are 2 input parameters (optional) and 1 output parameter. I am able to call this pkg-proc from SQL Plus and everything works fine. I can pass either of the 2 input parameters and the procedure returns the correct information depending upon what is passed. However when I exposed this as a web service, and if I do not pass the user id parameter, I get "Caught exception while handling request: deserialization error: java.lang.NumberFormatException: For input string: """ error. I tried nillable="true" and minOccurs="0" for user id but still it seems the web service is forcing me to enter the value for user id parameter. The other way works i.e. if user name is left blank.
    If I change the data type for the 1st parameter (p_user_id) to varchar2, then the WS returns proper info. Seems like nillable="true" works for string (varchar2) datatype but not for integer or number.
    Any help will be truly appreciated. Thanks.
    CREATE OR REPLACE package xxcc_ws is
      procedure Get_User_Status (
         p_user_id                      IN  INTEGER  DEFAULT 0
        ,p_user_name                    IN  VARCHAR2 DEFAULT NULL
        ,p_ret_msg                      OUT VARCHAR2
    END xxcc_ws;
    CREATE OR REPLACE package body xxcc_ws is
      procedure Get_User_Status (
         p_user_id                      IN  INTEGER  DEFAULT 0
        ,p_user_name                    IN  VARCHAR2 DEFAULT NULL
        ,p_ret_msg                      OUT VARCHAR2
      ) is
        lr_fu_rec       apps.fnd_user%ROWTYPE;
      begin
        select *
        into   lr_fu_rec
        from   apps.fnd_user
        where  user_id = nvl(p_user_id, user_id)
        and    user_name = nvl(p_user_name, user_name);
        -- warn if the person is end dated
        if lr_fu_rec.end_date is not null then
          p_ret_msg       := 'WARNING:Person is end dated as of '||to_char(lr_fu_rec.end_date,'mm/dd/yyyy');
        else
          p_ret_msg       := 'SUCCESS:'||lr_fu_rec.employee_id||':'||lr_fu_rec.email_address;
        end if;
        return;
      exception
        when others then
          p_ret_msg      := 'ERROR:'||sqlerrm;
          return;
      end Get_User_Status;
    END xxcc_ws;
    /Edited by: user13163442 on Nov 8, 2010 8:29 AM

    Hi
    I have tried pl/sql package via SOA gateway and it worked.

  • Error in Transfer posting for movement type 303

    Hi Sir,
    I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
    Error in Function:
    Order    not found or not permitted for Goods Movement.
    I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
    Transfer posting
    Transfer posting without reference to a reservation
    The following fields must be populated:
    Material number
    Plant
    Storage location
    Movement type
    Movement indicator
    Quantity in unit of entry
    ISO code unit of measurement for unit of entry
    If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
    Please help me .........
    Regards,
    Krishan

    I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
    With that said our system does require posting date, and batch.  You might check that.   Also check that you've included all the required information in the header.
    Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

  • The system could not create any outputs for mv type 561

    Hi,
    I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
    Chk your setting as below to get GR print out.
    . Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
    2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
    5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

    issue is resolved

  • MD01 for MRP type VB

    Deal All,
    I want to run MRP for VB type materials. we have used user exit. but when I am in the Transaction code MD01, the fields User exit key and User exit parameter are unchangeable, i.e. I can't do any changes to them. could someone tell me how to do this?
    I am having 8 plants and having different MRP Controllers. we use the same user exit for all the plants.
    Regards,
    Ram

    Hi Ram,
    As per the previous conversation I have noticed that you have some issues to call your user exit in MD01 transaction.
    There would be some technical faults exist while enhancing your user exit M61X0001 ; this exit you can use for limiting the Planning run for the particular MRP Controller.
    Now coming to your specific questions:
    - The MRP Type VB make it's entry in Planning File when the shortage of stock below it's reorder point maintained in the Material Master.
    - You can maintain the Planning File by using MD20 for a material or for whole Plant you can setup a job in MDAB transaction.
    - As you have mentioned that you need to run MRP for seven plants so you have to use Scope of Planning to run MRP for all the Plants at a single transaction. You have to define a Scope of Planning in customization of MRP (OM0E) with maintaining all the plants in a sequence. Also you have to select the option Parallel Processing in MD01 transaction to run MRP for all the Plants in the Scope of Planning.
    Please let me know if you have any questions.
    Regards,
    Nabin Patro

  • Deserializer not found for array Type...

    I hava a web-Servicd deployed in AXIS - is Takes an array of a complex type and returns one.
    Everytime i run the service the service properly does the processing and returns the correct Object.
    When the client receives the REsponse i get the following exception
    - Exception:
    org.xml.sax.SAXException: No deserializer defined for array type {urn:SchufaService}Response
         at org.apache.axis.encoding.ser.ArrayDeserializer.onStartElement(ArrayDeserializer.java:304)
         at org.apache.axis.encoding.DeserializerImpl.startElement(DeserializerImpl.java:428)
         at org.apache.axis.encoding.DeserializationContextImpl.startElement(DeserializationContextImpl.java:976)
         at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:198)
         at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:722)
         at org.apache.axis.message.RPCElement.deserialize(RPCElement.java:233)
         at org.apache.axis.message.RPCElement.getParams(RPCElement.java:347)
         at org.apache.axis.client.Call.invoke(Call.java:2272)
         at org.apache.axis.client.Call.invoke(Call.java:2171)
         at org.apache.axis.client.Call.invoke(Call.java:1691)
         at de.awe.client.SchufaServiceSoapBindingStub.getInformation(SchufaServiceSoapBindingStub.java:329)
         at de.awe.client.SessionClient.main(SessionClient.java:45)here is my .wsdd file - i think i did the correct bean and type mappings:
    <deployment xmlns="http://xml.apache.org/axis/wsdd/"
                xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
    <handler name="session" type="java:org.apache.axis.handlers.SimpleSessionHandler">
    </handler>
    <service name="SchufaService" provider="java:RPC">
      <requestFlow>
           <handler type="soapmonitor"/>
        <handler type="session"/>
      </requestFlow>
      <responseFlow>
           <handler type="session"/>
        <handler type="soapmonitor"/>
      </responseFlow>
      <parameter name="scope" value="session"/>
      <parameter name="className" value="de.awe.webservice.SchufaService"/>
      <parameter name="allowedMethods" value="*"/>
      <beanMapping qname="SchufaService:Person" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Person"/>
      <beanMapping qname="SchufaService:Address" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Address"/>
      <beanMapping qname="SchufaService:Request" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Request"/>
      <beanMapping qname="SchufaService:Response" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.Response"/>
      <beanMapping qname="SchufaService:ResponseAuskunft" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseAuskunft"/>
      <beanMapping qname="SchufaService:ResponseFehlerbehandlung" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseFehlerbehandlung"/>
      <beanMapping qname="SchufaService:ResponseNachbehandlung" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseNachbehandlung"/>
      <beanMapping qname="SchufaService:Textdaten" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Textdaten"/>
      <beanMapping qname="SchufaService:Merkmal" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Merkmal"/>
      <typeMapping
            xmlns:ns="http://localhost:8080/axis/services/SchufaService"
            qname="ns:ArrayOf_tns1_Request"
            type="java:de.awe.client.Request[]"
            serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
            deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
            encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
          />
      <typeMapping
            xmlns:ns="http://localhost:8080/axis/services/SchufaService"
            qname="ns:ArrayOf_tns1_Response"
            type="java:de.awe.client.Response[]"
            serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
            deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
            encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
          />
    </service>
    </deployment>Please tell me where to find the error...
    Thanks a lot

    Hi,
    Can you paste the client's code in here? this error is usually on the client side where in the array type was not mapped properly.
    thanks,
    leighsy
    I hava a web-Servicd deployed in AXIS - is Takes an
    array of a complex type and returns one.
    Everytime i run the service the service properly does
    the processing and returns the correct Object.
    When the client receives the REsponse i get the
    following exception

  • Java call stored procedure with nested table type parameter?

    Hi experts!
    I need to call stored procedure that contains nested table type parameter, but I don't know how to handle it.
    The following is my pl/sql code:
    create or replace package test_package as
    type row_abc is record(
    col1 varchar2(16),
    col2 varchar2(16),
    col3 varchar2(16 )
    type matrix_abc is table of row_abc index by binary_integer;
    PROCEDURE test_matrix(p_arg1 IN VARCHAR2,
    p_arg2 IN VARCHAR2,
    p_arg3 IN VARCHAR2,
    p_out OUT matrix_abc
    END test_package;
    create or replace package body test_package as
    PROCEDURE test_matrix(p_arg1 IN VARCHAR2,
    p_arg2 IN VARCHAR2,
    p_arg3 IN VARCHAR2,
    p_out OUT matrix_abc
    IS
    v_sn NUMBER(8):=0 ;
    BEGIN
    LOOP
    EXIT WHEN v_sn>5 ;
    v_sn := v_sn + 1;
    p_out(v_sn).col1 := 'col1_'||to_char(v_sn)|| p_arg1 ;
    p_out(v_sn).col2 := 'col2_'||to_char(v_sn)||p_arg2 ;
    p_out(v_sn).col3 := 'col3_'||to_char(v_sn)||p_arg3 ;
    END LOOP ;
    END ;
    END test_package ;
    My java code is following, it doesn't work:
    Class.forName ("oracle.jdbc.driver.OracleDriver");
    Connection con = DriverManager.getConnection
    ("jdbc:oracle:thin:@10.16.102.176:1540:dev", "scott", "tiger");
    con.setAutoCommit(false);
    CallableStatement ps = null;
    String sql = " begin test_package.test_matrix( ?, ? , ? , ? ); end ; ";
    ps = con.prepareCall(sql);
    ps.setString(1,"p1");
    ps.setString(2,"p2");
    ps.setString(3,"p3");
    ps.registerOutParameter(4,OracleTypes.CURSOR);
    ps.execute();
    ResultSet rset = (ResultSet) ps.getObject(1);
    error message :
    PLS-00306: wrong number or types of arguments in call to 'TEST_MATRIX'
    ORA-06550: line 1, column 8:
    PL/SQL: Statement ignored
    Regards
    Louis

    Louis,
    If I'm not mistaken, record types are not allowed. However, you can use object types instead. However, they must be database types. In other words, something like:
    create or replace type ROW_ABC as object (
    col1 varchar2(16),
    col2 varchar2(16),
    col3 varchar2(16 )
    create or replace type MATRIX_ABC as table of ROW_ABC
    /Then you can use the "ARRAY" and "STRUCT" (SQL) types in your java code. If I remember correctly, I recently answered a similar question either in this forum, or at JavaRanch -- but I'm too lazy to look for it now. Do a search for the terms "ARRAY" and "STRUCT".
    For your information, there are also code samples of how to do this on the OTN Web site.
    Good Luck,
    Avi.

  • Archiving of ERS messages: maintain archiving parameters for message type

    Dear experts,
    I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
    NACE: application "MR", output type "ERS"
    details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
    processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
    A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
    OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
    OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
    The archive "K1" is existing and working for other documents, but not for ERS.
    Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
    Regards, Karsten

    Dear experts,
    I have problems creating archive messages for ERS messages in ECC 6.0. I always get message "Maintain archiving parameter(s) for output type ERS (appl. MR)" even if I have done all steps as described in SAP note 391822:
    NACE: application "MR", output type "ERS"
    details: storage mode "2 Archive only", document type "ZUNSGUTHCD"
    processing routine: medium "1 print", program "RM08NAST", form routine "ENTRY_ERS", form "MR_PRINT".
    A condition record for message type ERS is existing with function "VN" and medium "1" and date/time "4".
    OAC2: document type "ZUNSGUTHCD", document class "PDF", status "x".
    OAC3: object type "BUS2081", Doc.type "ZUNSGUTHCD", L "x", Content rep. ID "K1", link "TOA01", retention period "0".
    The archive "K1" is existing and working for other documents, but not for ERS.
    Something is missing, but I don't find out what. Any help is greatly appreciated, point are given!
    Regards, Karsten

Maybe you are looking for

  • Reinstall or update mail.app with 10.6.8

    mail.app says  incompatible with present OS  10.6.8 and will not update?

  • Looking for a free or low cost EJB server

    I'm looking to start my own web app to help teach myself EJB and am looking for a free or low-cost ejb app server that I can work on. I realize I get what I pay for so performace isn't an issue. Anyone have suggestions?

  • HT5622 itunes stopped working

    I can no longer open itunes. It says to re-install itunes but it wont let me do that either! what can I do

  • Info Steward - BI Lineage - how is the lineage link calculated?

    I have extracted metadata into Information Steward from WEBI reports and their universes as well as from the Oracle database on which the universes are built on. However, when I try to see the lineage for the WEBI report, the lineage diagram indicate

  • Interactive Report with Select List LOV's

    Hi All - I need to develop an Interactive Report which displays reports based on values selected from a select list (LOV's) on this IR report. Following is what I am working on. This page has 2 select lists with the corresponding LOV values: Date Fro