Optional target message - no errors raised

HI all,
I have been trying to find some information on how to deal with optional target messages in a message mapping/interface mapping.
I have a situation where one file can potentially create between 0 to 4 files and I don't want errors in production when no output files are created.
I know that there were some blogs about this but I have been looking for hours and I can't find any.
If anyone could give me some advice or could point me to the right blogs or forum threads I would really appreciate.
The PI version I am working on is 7.0... so a it's bit old.
Thanks for your help,
Aldo

Hi all,
Thanks for your replies so far.
I think that what I need is something similar to what Chandra said. I will have a Message Mapping with a source message occurrence of 1 and a target message occurrence of 0 to 1.
And the Interface Mapping should be the same. The target message should have a 0 to 1 occurrence.
So depending of what the source file contains I will either create the output or not.
However, I am not too sure about the part in configuration. The condition in the interface determination is not an option as I have a condition that is far too complicated. And it's the same for the Receiver determination...
Will it cause an error at run-time if an interface mapping doesn't produce any output?
Thanks for any additional help you can provide.
Aldo

Similar Messages

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi

Hi,
I have joined newly to the team.
When I tried to open one message mapping it throwinf follwing error...
"Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465..
Check whether the software component version ID: 44423362454456485465 is in Enterprise Service Repository. Import this version if necessary"
Is there any impact because of which in the message flow?
In my case some of the messages are failing with mapping error "runtime exception occured during application mapping com/sap/xi/tf/_SUS2MMOrderResponse_; java.lang.NullPointerException: while trying to invoke the method java.util.Map.get(java.lang.Object) of an object loaded from field com.sap.aii.map`"
And some of the messages are processed sucessfully and they also using the same mapping program 'SUS2MMOrderResponse'.
Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
Regards
Baskaran K

Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE.

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanks

skim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

FRF-00025 Unable to call function. Error message: Syntax error in program

hi,
when we try to import the export file,we are getting the following error in the 24th phase
i.e., check DDIC Password.
The Error is
INFO       2007-10-29 15:53:20 [iaxxrfcimp.cpp:1017]
           CAbRfcImpl::callLibraryFunction
Generating interface for remote function.
TRACE      [iaxxrfcimp.cpp:1056]
           CAbRfcImpl::performFunctionCall
Calling function module: INST_RFC_GET_INTERFACE
WARNING[E] 2007-10-29 15:53:21 [iaxxrfcimp.cpp:1089]
           CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Syntax error in program SAPLSUNI                                . .
TRACE      [iaxxrfcimp.cpp:1090]
           CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE      [iaxxrfcimp.cpp:1091]
           CAbRfcImpl::performFunctionCall
Syntax error in program SAPLSUNI                                .
TRACE      [iaxxbjsmod.cpp:657]
           CJSlibModule::showOkCancelBox_impl()
<html>Test logon to SAP System I50 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
TRACE      [iaxxgenimp.cpp:1093]
           showDialog()
waiting for an answer from gui
What Could be the solution for this.
waiting for ur reply
SS

Hi Friend,
Please check whether or not there is view missing error recorded in dev_w0 trace file.
if there is , you can try to follow this procedure in order to manually
import the missing view definitions.
All steps must be carried out with the <sid>adm user of the target
system and from the install-directory:
1. In the install-directory
<sapinst_instdir>\...COPY\IMPORTT\SYSTEM\ABAP\ORA\UC\DB
create a file SAPVIEW.cmd with the following content:
tsk: "<sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\SAPVIEW.TSK"
icf: "
<YOUR_EXPORT_DIRECTORY>\export\DATA\SAPVIEW.STR"
dcf: "<sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\DDLORA.TPL"
dat: null
dir: null
ext: null
Please make sure that all paths are written correctly (in one line) and
the refered files are existant and readable. One exception:
The SAPVIEW.TSK file is created with step 2.:
2. Run from the command-line:
R3load -ctf I
<YOUR_EXPORT_DIRECTORY>\export\DATA\SAPVIEW.STR <sapinst_instdir>\...\COPY\IMPORT\SYSTEM\ABAP\ORA\UC\DB\DDLORA.TPL SAPVIEW.TSK ORA -l SAPVIEW.log
If there's a problem reading the 'SAPVIEW.STR' file, copy the
file to the install directory and adapt the path accordingly.
3. Run the view import by:
R3load.exe -i SAPVIEW.cmd -dbcodepage <YOUR_CODE_PAGE> -l SAPVIEW.log
-stop_on_error
4. Check both the SAPVIEW.log and the SAPVIEW.TSK file whether all views
have been created successfully.
If 4. is okay, restart the central instance and check whether you are
able to log on now. If yes, continue 'sapinst' by the option 'retry' or
'continue old installation'.
I Hope It can be helpful.
With Best Regards
Julia

Problem in creation of target with the generated target message

Hi,
Im doing File-to-File content conversion scenario.
Im able to see successful message in SXMB_MONI. Target message also created (Request Message Mapping) according the requirement.
Im using lastfieldOptional option in source content conversion.
Adapters are running fine without content conversion failure..
But the target file is not created.
Could you pls anyone gives the reason or suggest any other things I need to verify.
Thanks,
Venu.

Hi,
do you see any errors in adapter <b>message</b> monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
michal

Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide

I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules". I uninstalled, emptied trash and re-installed but I continue to get the same message.

I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?

A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020

Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks,
Nando

I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks,
Nando

FDM data target system load error

Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SV

One of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1

Getting the Source File name Info into Target Message

Hi all,
I want to get the Source file name Info into Target message of one of the fields.
i followed Michal BLOG /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Requirement :
1) I am able to get the Target file name as same as the source file name when i check the ASMA in Sender & Receiver Adapter , with out any UDF...............this thing is OK
2) I took One field extra in the target structure Like "FileName" & I mapped it Like
Constant(" " )--UDF-----FileName
I Checked the Option ASMA in Both Sender & Receiver Adapters
Here iam getting the Target File name as same as Source file name + Source File name Info in the Target Field " FileName".
I Dont want to get the Target File name as same as Source file name. I want like Out.xml as Target file name.
If i de-select the Option ASMA in Adapters means it is showing " null" value in the target field "FileName".
Please Provide the Solution for this
Regards
Bopanna

Hi All,
Iam able to do this by checking the Option ASMA in only sender adapter itself
Regards
Bopanna

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error

B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
        at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
        at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
        at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
        at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
        at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
Ken

Ken,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work.

Searching a Field In Source or Target Message in Message Mapping

Hey Guys,
I came accross this peculiar behaviour and it keeps bugging me , I could search any field in source or target message in message mapping in PI 7.0 by copying the path( /ns1:MaestroAcreedores/Acreedores/ClaveDeGrupo or any idoc field /FIDCCP02/IDOC/E1FIKPF/BUDAT ) but in PI 7.1 i cant , its giving me an error String /ns1:MaestroAcreedores/Acreedores/ClaveDeGrupo not found , i can only search the field independently.Can anyone please help me out in this.

Hi
I am not sure whether it worked in 7.0 or not, but having checked myself i can confirm that it is not working in 7.1 in my system also.
For alternative, you can check by changing into source text view where it will display as xml. Here when you search the keyword, it would display you the hierarchy better than normal view.
I dont think there is any other alternative. although I would say in the worst case scenario you would not have more than 10-15 occurrences of same element in an idoc.
Regards
Krish

1: N multi mapping -----Message Mapping Error

Hi,
I am doing this scenario
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
In the design part of the mapping.
How can I perform the message mapping
Step 1. We are controlling occurrence of Output Piyush_msg_out_3 by mapping it with element2 with message context.
Step 2.
We are using u201CUseOneAsManyu201D under category node functions (SP14). It has three inputs ;
   1. Element which is going to be used for multiple times. In our case it is Element1 with message context.
   2. The element which is going to define how many times it will be replicated. Important thing, context should be same.
   3. Same as second input but with its own context in our case it is Element2.
For Step 1,
I have mapped piyush_msg_out_3 with Element2 (context is root)
For Step 2,
I have mapped
Element1(context root)----
|
Element2(context root)----
|   useOneAsMany -
>Element1
Element2(context root)----
|
subelement------> subelement
I did not do root mapping.
when do the test I am getting the following error
Start of test
Compilation of MM_multimappingandoptimizing successful Cannot produce target element
/ns0:Messages/ns0:Message1/ns1:piyush_msg_out_3[2]/root/Element1. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element
/ns0:Messages/ns0:Message1/ns1:piyush_msg_out_3[2]/root/Element1. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
End of test
I thought error generated due to Parent Node condition fails, How do I map the Top node,
even though I mapped root------->root, I am getting the same error in the instance test
Please give me some suggestions
my message mapping is correct or do I need to change the context of the node or what should I have to do ?
thanks
manian

Hi Praveen,
I have checked the XSD tab of Source and Target message types. I can see the complete XSD.
Source Message Type XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:mlr:multimappingandoptimizing" targetNamespace="urn:mlr:multimappingandoptimizing">
     <xsd:element name="piyush_msg_in_1" type="piyush_msg_in_1" />
     <xsd:complexType name="piyush_msg_in_1">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               f1fd03a0cddd11ddc1c4001cc01cef0d
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="root">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         99ffb9e0cd1a11ddc6b0001cc01cef0d
                         </xsd:appinfo>
                    </xsd:annotation>
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="Element1" type="xsd:string">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        99ffb9e1cd1a11dd8843001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="Element2" maxOccurs="unbounded">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        99ffb9e2cd1a11dd8f7a001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="subelement" type="xsd:string">
                                                  <xsd:annotation>
                                                       <xsd:appinfo source="http://sap.com/xi/TextID">
                                                       99ffb9e3cd1a11dd8ff2001cc01cef0d
                                                       </xsd:appinfo>
                                                  </xsd:annotation>
                                             </xsd:element>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
Target Message Type XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:mlr:multimappingandoptimizing" targetNamespace="urn:mlr:multimappingandoptimizing">
     <xsd:element name="piyush_msg_out_3" type="piyush_msg_out_3" />
     <xsd:complexType name="piyush_msg_out_3">
          <xsd:annotation>
               <xsd:appinfo source="http://sap.com/xi/TextID">
               058e2b60cdde11ddaffd001cc01cef0d
               </xsd:appinfo>
          </xsd:annotation>
          <xsd:sequence>
               <xsd:element name="root">
                    <xsd:annotation>
                         <xsd:appinfo source="http://sap.com/xi/TextID">
                         7fb0d7d0cd1b11dd99ae001cc01cef0d
                         </xsd:appinfo>
                    </xsd:annotation>
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="Element1" type="xsd:string">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        7fb0d7d1cd1b11ddc07e001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="Element2">
                                   <xsd:annotation>
                                        <xsd:appinfo source="http://sap.com/xi/TextID">
                                        7fb0d7d2cd1b11dd9385001cc01cef0d
                                        </xsd:appinfo>
                                   </xsd:annotation>
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element name="subelement" type="xsd:string">
                                                  <xsd:annotation>
                                                       <xsd:appinfo source="http://sap.com/xi/TextID">
                                                       7fb0d7d3cd1b11dda9d7001cc01cef0d
                                                       </xsd:appinfo>
                                                  </xsd:annotation>
                                             </xsd:element>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:sequence>
     </xsd:complexType>
</xsd:schema>
thanks
manian

Optional target message - no errors raised

Similar Messages

Maybe you are looking for