Options to create an IWorklistContext

I am using the RemoteWorklistClient and I am trying to create a valid IWorklistContext and it appears that I have two options. First, I could supply a username/password combo and second, I can pass on an HttpRequest object. Neither of these seem to be able to handle my particular scenario.
My use case:
user logs on with a username/password
that username/password is authenticated via OID
User uses the site for some time
User wants to interact with the worklist app
At that point, I know the user's username. I just dont know their password anymore (that is a good thing, I assume). I also do not have access to an HttpRequest object (and even if I did, I assume it would only be useful if I were using Single signon, which we are not).
so, my question is: is there any other way to create the WorklistContext without having the user to provide the username/password again and without having to install and setup single signon?
thanks,
Greg

I think I came to my own conclusion.
At the time the user logins (and I have their username and password), I will also authenticate them and create an IWorklistContext. I will then keep their context id around as part of my application's session.

Similar Messages

Words like "tomorrow night" give the option to create event. Is this a new feature?

I send the message "tomorrow night" and these two words underlined and provide an option to create an event!
Is this a new feature or is me that just discover it?
Che

I know it was working with numbers like "15:30" but i never seen before to work with phrases? (a simple "tomorrow" won't work.)

Regarding RESETLOG and NORESETLOG option while creating a control file

Hi,
I dont understand the need for resetlogs option while creating a controlfile for a db in NOARCHIVELOGMODE. I assume that reset logs clears all the redo log contents.
While taking a cold backup what I did was:
1. Shutdown instance
2. Copy all the files
3. Startup
Now I tried recovering the same database on a new machine (with different path btw.) coz of which i had to create a new control file. My question is: while restoring the database, do I need to create the control file with NORESETLOG or RESETLOG option?
When I tried using the NORESETLOG (NOARCHIVELOG) option I was able to recover the instance without any hassles.
ie
1. STARTUP NOMOUNT
2. CREATE NEW CONTROL FILE USING NORESETLOG (NOARCHIVELOG)
3. RECOVER DATABASE
4. ALTER DATABASE OPEN;
While the same thing with NORESETLOG (NOARCHIVELOG) option:
1. STARTUP NOMOUNT
2. CREATE NEW CONTROL FILE USING RESETLOG (NOARCHIVELOG)
3. RECOVER DATABASE USING BACKUP CONTROLFILE
This step asked me for some archivelogs which were not generated since the db is in NOARCHIVELOG mode.
I wonder why we require the RESETLOG OPTION SINCE A NORMAL SHUTDOWN PERFORMED BEFORE COLD BACKUP would have ensured that there is no redo information left in the redo logs.
Please let me know if I am thinking the incorrect way.
Regards and Thanx in Advance,
Raj

If you had a db running in noarchivelog mode and had to clone the db and rename it, the create controlfile stmt:
create controlfile reuse <db_name> needs to be changed to: create controlfile SET <db_name>, in which case the db can only be opened with resetlogs. Hope this answers your question

How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

I have an intel based mac with 10.6.8 mac os x. How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these computers:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
If you don't have any of these Macs, you can't install Windows through a USB drive. Instead, buy Windows on a DVD. Follow Apple's steps > http://support.apple.com/MANUALS/1000/MA1519/en_US/Boot_Camp_Install-Setup_10.6. pdf

Options to create IDOC in IDOC Flatfile

Hi,
we have requirement to process a fixed length file and map that structure to a standard IDOC and that IDOC has to be written out as IDOC flat file.I just want to get different opinions to see whether there are any other options other than using ABAP mapping like mentioned in that standard How to Guide IDOC XML to IDOC Flatfile.
My scenario is Fixed length file ->XI->IDOC Flatfile-->SAP(through File port with RSEINB00 Report)
I know there is module available in PI7.1,but we are still in PI7.0 with SP18 and no plans to up grage yet.
In the file I get single header,multiple details and single trailer records and I have to create multiple IDOCs(that many number of Detail Records) from a single file.So,I think I need to use BPM first to convert multiple IDOC to single IDOC and then use the ABAP mapping to convert IDOC XML to IDOC Flatfile.like two steps.
so I am thinking to avoid BPM,ABAP mapping and to see different options to create an IDOC flat file and the receiving SAP system can read the IDOC flatfile using standard File port.Receiving SAP is is very low version(I think 3.0) which is not supporting IDOC adapter communication from XI.
please suggest different options to get IDOC Flatfile or even directly sending IDOC (with ALE connection) that has been created after the mapping from ffixed length flatfile to standard IDOC.
Thank you in adavance.
Babu

> In the file I get single header,multiple details and single trailer records and I have to create multiple IDOCs(that many number of Detail Records) from a single file.So,I think I need to use BPM first to convert multiple IDOC to single IDOC
Hi Babu,
When PI reads the file from source system, it will read all the data into Single XML file and in message mapping just do 1:N mapping to create multiple IDOCs from single XML. You dont have to use BPM for this requirement.
You wait for better solution from other for 2nd part of your requirement i.e IDOC-XML to IDOC Flat file conversion.
Have a great day.
Cheers,
Jag

Yoga 13 doesn't have an option to create recovery media in onekey recovery

Hi All,
I am prepping a new Lenovo Yoga 13 for a user. I want to create recovery DVD(s) for the new system with the OneKey Recovery software. When I open the application there is no option to create media. There are only a backup option and a restore option. I called tech support and they advised if I attach a DVD drive the option to create media will appear. I did this but no luck..... I am attaching first a picture of what I see when I open One Key Recovery
And secondly to show that I do have a usb DVD connected here is a picture of the DVD attached with a blank DVD inside it.
I have downloaded the lastest update to the One Key Utility and am running version: 8.0.0.1519. Can anyone give any insight as to why the create recovery media isn't there for me?.....
Solved!
Go to Solution.

I found the answer to my own question. Essentially in version 8 there is no way to create recovery media with this utility. I came across the following link which I am going to try:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

Why am I only given the option to create a pdf when I want to convert from pdf to word document? My plan is the PDF pack.

Why am I only given the option to create a pdf when I want to convert from pdf to word document? My plan is the PDF pack it should do it ¡

Hi,
I checked your account,you have an active PDF pack.
You need to click on Export PDF to convert from PDF to word document.
Regards,
Florence

Why am I only given the option to create a pdf when I want to convert from pdf to word document?

Why am I only given the option to create a pdf when I want to convert from pdf to word document?

Hi,
If you have PDF pack subscription you can avail all of the services like export PDF,create PDF & etc.
Otherwise you have to purchase every service individually.
Regards,
Florence

In MAX, I don't have the option to create a DAQmx Simluated Device. Why not?

I'm new to LABView. I installed the software, including the Measurement & Automation Explorer (MAX). Within MAX, I am trying to create a DAQmx Simulated Device, as suggested in a training guide (which I quote below). I don't have the option to create such a thing upon right-clicking on "Devices and Interfaces". I am given the option to create a new GPIB-VXI Interface, a Port, VISA TCP/IP Resource, and GPIB-ENET/100. I'd appreciate if someone can help me to create a simulated device according to the following steps, given that I currently lack the option "NIDAQmx Simulated Device":
3. Create a simulated DAQ device for use later in this course. Simulated devices are a powerful tool for development without having hardware physically installed in your
computer. Right-click Devices and Interfaces and select Create New…»NIDAQmx Simulated Device. Click “Finish”.
4. Expand the M Series DAQ section. Select PCI-6220 or any other PCI device of your choice. Click “OK”.
Thanks.

It sounds like you didn't install DAQmx. Open MAX and get a list of the software present. If you don't see DAQmx listed, install it from the CD/DVD or download the latest version.

The best option to create a shared storage for Oracle 11gR2 RAC in OEL 5?

Hello,
Could you please tell me the best option to create a shared storage for Oracle 11gR2 RAC in Oracel Enterprise Linux 5? in production environment? And could you help to create shared storage? Because there is no additional step in Oracle installation guide. There are steps for only asm disk creation.
Thank you.

Here are names of partitions and permissions. Partitions which have 146 GB, 438 GB, 438 GB of capacity are my storage. Two of three disks which are 438 GB were configured as RAID 5 and remaining disk was configured as RAID 0. My storage is Dell MD 3000i and connected to nodes through ethernet.
Node 1
[root@rac1 home]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:39 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:40 /dev/sda1
brw-r----- 1 root disk 8, 16 Aug 8 17:39 /dev/sdb
brw-r----- 1 root disk 8, 17 Aug 8 17:39 /dev/sdb1
brw-r----- 1 root disk 8, 32 Aug 8 17:40 /dev/sdc
brw-r----- 1 root disk 8, 48 Aug 8 17:41 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 18:26 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:43 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 18:34 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:43 /dev/sdf1
brw-r----- 1 root disk 8, 96 Aug 8 18:34 /dev/sdg
brw-r----- 1 root disk 8, 97 Aug 8 18:43 /dev/sdg1
[root@rac1 home]# fdisk -l
Disk /dev/sda: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8844 71039398+ 83 Linux
Disk /dev/sdb: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4079 32764536 82 Linux swap / Solaris
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 17784 142849948+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
Disk /dev/sdg: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 53352 428549908+ 83 Linux
Node 2
[root@rac2 ~]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:50 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:51 /dev/sda1
brw-r----- 1 root disk 8, 2 Aug 8 17:50 /dev/sda2
brw-r----- 1 root disk 8, 16 Aug 8 17:51 /dev/sdb
brw-r----- 1 root disk 8, 32 Aug 8 17:52 /dev/sdc
brw-r----- 1 root disk 8, 33 Aug 8 18:54 /dev/sdc1
brw-r----- 1 root disk 8, 48 Aug 8 17:52 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 17:52 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:54 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 17:52 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:54 /dev/sdf1
[root@rac2 ~]# fdisk -l
Disk /dev/sda: 145.4 GB, 145492017152 bytes
255 heads, 63 sectors/track, 17688 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8796 70653838+ 83 Linux
/dev/sda2 8797 12875 32764567+ 82 Linux swap / Solaris
Disk /dev/sdc: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 17784 142849948+ 83 Linux
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 53352 428549908+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
[root@rac2 ~]#
Thank you.
Edited by: user12144220 on Aug 10, 2011 1:10 AM
Edited by: user12144220 on Aug 10, 2011 1:11 AM
Edited by: user12144220 on Aug 10, 2011 1:13 AM

Options to create Accounts on PCUI

- Hi All,
    Need some help on CRM functionality at the SAP Portal.
    Under 'Accounts', as I press the Create button, a screen pops-up with three options to create: person, organization or group.
    In our scenario, we just want to create business partner as 'person' (contact person) so I want to make the other 02 options not available when creating new Accounts. What do I have to do to make it happen?
     Thanks in advance for any help.
     Take care,
Daniel Albuquerque
Procwork CRM
[email protected]

Hi Daniel,
I think the Topic PCUI: Only allow orgainsations as partner type in accounts application can be of value for you.
Regards
Gregor

Options to create BIAR file in Business objects 4.1

What are the options to create .biar file in 4.1. Business objects used to have Import Wizard in 3.1, now its being eliminated. Any alternatives now?

Hi,
You can create a .BIAR file on BI 4.1, i do it all the time, using .bat and .properties files.
.bat file :
%DRIVELETTER%
cd "%BOPATH%\win32_x86\jre\bin"
java -jar "%BOPATH%\java\lib\biarengine.jar" "%BACKUPPATH%\Sauvegardes.properties"
.properties file for juste save public file and dependencies (for exemple) :
exportBiarLocation=%BACKUPPATH%/Sauvegardes.biar
action=exportXML
userName=Administrator
password=XXXXXXXXXXXX
CMS=localhost:6400
authentication=secEnterprise
exportDependencies=true
exportQuery=select * from ci_infoobjects where SI_ancestor = 23
exportQueriesTotal=1
But you can used other query, and more than 1.
Hope it help you.
regards
Mickaël

HT2534 it does not give me the "none" option to create a free account

I dont get the 'none' option to create a free account..please help

Did you follow the instructions on that page exactly when creating the account (the instructions won't work with existing accounts) ?
e.g. if doing it on your computer's iTunes and yo are currently logged into an account then log out of it. Then find a free app app in the store and click on its free 'price' :
And on the popup that you get click on 'create Apple id' :
A few days ago I tried that process in response to another thread and I got the 'none' option on the payment details screen.

No option to create a .Mac account type

I've noticed that I no longer have the option available to create a .Mac account type. Only IMAP, POP and Exchange are available. This used to work ok, but since I had some mail problems a while ago and I was deleting the plist files, etc, and re-installed mail, this option has now disappeared.
I have again deleted the mail plist preferences file, but the option to create a .Mac account is unavailable.
I do have access to my .Mac mail by setting it up as an IMAP account, but I miss out on .Mac specific features, such as being able to select my alias addresses to send from.
Does anyone have an idea on how to restore the .Mac account type option?

Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong with the data stored within your home folder, for example, and may even introduce new issues if not done properly.
In particular, system updates often include updates for applications that are part of Mac OS X, such as Mail. As a result of having reinstalled Mail, you may now have a version of that application older than what corresponds to the version of Mac OS X you’re running. Or it could be that you’ve removed the AccountTypes folder from /Library/Mail/ (not to be confused with ~/Library/Mail/).
Since you did this because of some other (unspecified) problems, verify/repair the startup disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Automate Menu is not showing the option to create droplet in Photoshop cs3 windows 7

Automate Menu is not showing the option to create droplet in Photoshop cs3 windows 7. Any thoughts why?

Have you reset the workspace to Default?
Window>Workspace>Default Workspace

Options to create an IWorklistContext

Similar Messages

Maybe you are looking for