ORA-00205: error in identifying controlfile, check alert log for more info
Hello All,
I am performing my first Collab Suite install in quite some time and I have successfully installed Collaboration Suite on Linux Red Hat AS 4. I first performed an infrastructure installation for the Collab Suite database which completed with no errors, however, it appears that no control files were created in my $ORACLE_HOME/dbs directory during installation. I am also unable to specify their exact location in the initSID.ora file as I am unable to find them in any other directory on my server. The database starts despite the control file error, as you can see from the second SQL*Plus prompt. However, I am unsure how to create the control files or correct this error. Any assistance would be greatly appreciated!
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 09:51:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 100663296 bytes
Fixed Size 778024 bytes
Variable Size 99623128 bytes
Database Buffers 0 bytes
Redo Buffers 262144 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
======================================================================
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 11:18:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected.
SQL> startup nomount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
Control files are database-specific, since they contain information describing the database (location of data files, etc.) You can't copy them from one database to another.
Do you have a backup?
Similar Messages
-
ORA-00205: error in identifying control file, check alert log for more info
Hi
I'm creating a database manually,
I am hitting with the following error :
SQL> startup mount
ORACLE instance started.
Total System Global Area 150667264 bytes
Fixed Size 1335080 bytes
Variable Size 92274904 bytes
Database Buffers 50331648 bytes
Redo Buffers 6725632 bytes
ORA-00205: error in identifying control file, check alert log for more info
Following is the entry in init.ora
control_files='/u01/oracle/db/oradata/testdb/control01.ctl','/u01/oracle/db/oradata/testdb/control02.ctl'
and this the owner priviliges of /u01/oracle/db/oradata/testdb directory
drwxrwx--- 2 oracle dba 4096 Oct 10 12:16 testdbFound in $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace/alert/log.xml
ORA-00210: cannot open the specified control fileORA-00202: control file: '/u01/oracle/db/oradata/testdb/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/oracle/db/oradata/testdb/control01.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3 -
Error in identifying control file, check alert log for more info
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security? -
ORA-00205: error in identifying controlfile
Hi
When im starting the oracle sever , im getting following message.
ORA-00205: error in identifying controlfile, check alert log for more info
In the alert log file ,
ORA-00202: controlfile: '/database/oradata/PROD/CTL1_001_PROD_REF_00.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
How can i solve this , please help me .
Thank you
LukeHow can i solve this , please help me .Ensure the file exists with OK permissions or remove it from pfile list
-
ORA-00205: error in identifying control file, check alert log for more
I am trying to upgrade database software from 11.2.0.1 to 11.2.0.2 and followed the steps given in the Doc ID 1276368.1 in linux 86 OS environment . I am in step 9 where i need to start up the database in startup upgrade mode. I get the the following error. Please help. This out of box upgrade is quite tricky and my database is stigged version. Not able to trouble shoot further, Please help me to go forward.
sqlplus " / as sysdba "
SQL> spool /tmp/upgrade.log
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1607008256 bytes
Fixed Size 1344476 bytes
Variable Size 973081636 bytes
Database Buffers 620756992 bytes
Redo Buffers 11825152 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i shutdown and restart again? I need to run @catupgrd.sql; and other.sql to upgrade it and then apply CPU patch.
Please help...regardsFatal NI connect error 12637, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 21-NOV-2011 04:49:04
Tracing not turned on.
Tns error struct:
ns main err code: 12637
TNS-12637: Packet receive failed
ns secondary err code: 12532
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (3912) as a result of ORA-609
Mon Nov 21 04:59:02 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 04:59:04 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 26
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 04:59:09 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 04:59:09 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 04:59:09 2011
ARCH shutting down
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC3: Archival stopped
ARC1: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 1458
Successful close of redo thread 1
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
MMON started with pid=15, OS id=4342
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon C:\Users\MVEMURI 07:48:48 2011
MMNL started with pid=16, OS id=4347
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 07:48:49 2011
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 2616737889
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Mon Nov 21 07:48:54 2011
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Mon Nov 21 07:48:54 2011
ARC0 started with pid=20, OS id=4398
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Mon Nov 21 07:48:55 2011
ARC1 started with pid=21, OS id=4403
Mon Nov 21 07:48:55 2011
ARC2 started with pid=22, OS id=4408
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
Mon Nov 21 07:48:55 2011
ARC3 started with pid=23, OS id=4413
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1458
Current log# 3 seq# 1458 mem# 0: /u01/app/oracle/oradata/rtborcl/redo03.log
Current log# 3 seq# 1458 mem# 1: /u02/app/oracle/oradata/redo03b.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:977954 end:979234 diff:1280
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Mon Nov 21 07:48:58 2011
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Nov 21 07:49:03 2011
QMNC started with pid=24, OS id=4418
Mon Nov 21 07:49:10 2011
db_recovery_file_dest_size of 4977 MB is 13.68% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Nov 21 07:49:12 2011
Completed: ALTER DATABASE OPEN
Mon Nov 21 07:49:12 2011
Starting background process CJQ0
Mon Nov 21 07:49:12 2011
CJQ0 started with pid=25, OS id=4470
Mon Nov 21 07:54:05 2011
Starting background process SMCO
Mon Nov 21 07:54:05 2011
SMCO started with pid=26, OS id=4515
Mon Nov 21 10:08:01 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:08:01 2011
Thread 1 advanced to log sequence 1459 (LGWR switch)
Current log# 1 seq# 1459 mem# 0: /u01/app/oracle/oradata/rtborcl/redo01.log
Current log# 1 seq# 1459 mem# 1: /u02/app/oracle/oradata/redo01b.log
Mon Nov 21 10:08:04 2011
Archived Log entry 1421 added for thread 1 sequence 1458 ID 0x990b1f4c dest 1:
Mon Nov 21 10:12:53 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:12:53 2011
Thread 1 advanced to log sequence 1460 (LGWR switch)
Current log# 2 seq# 1460 mem# 0: /u01/app/oracle/oradata/rtborcl/redo02.log
Current log# 2 seq# 1460 mem# 1: /u02/app/oracle/oradata/redo02b.log
Mon Nov 21 10:12:53 2011
Archived Log entry 1422 added for thread 1 sequence 1459 ID 0x990b1f4c dest 1:
Mon Nov 21 10:14:44 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 10:14:45 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 4
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 10:14:49 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 10:14:54 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC3: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC2: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC1: Archival stopped
Thread 1 closed at log sequence 1460
Successful close of redo thread 1
Mon Nov 21 10:15:01 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 10:15:02 2011
Stopping background process VKTM:
Mon Nov 21 10:15:08 2011
Instance shutdown complete
Mon Nov 21 11:52:11 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/db_2/dbs/initrtborcl.ora
System parameters with non-default values:
processes = 150
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Create Relation DFW_CONFIG_CAPTURE
Create Relation DFW_CONFIG_ITEM
Mon Nov 21 11:52:17 2011
PMON started with pid=2, OS id=7339
Mon Nov 21 11:52:17 2011
PSP0 started with pid=3, OS id=7344
Mon Nov 21 11:52:18 2011
VKTM started with pid=4, OS id=7349
VKTM running at (100ms) precision
Mon Nov 21 11:52:18 2011
GEN0 started with pid=5, OS id=7356
Mon Nov 21 11:52:19 2011
DIAG started with pid=6, OS id=7361
Mon Nov 21 11:52:19 2011
DBRM started with pid=7, OS id=7366
Mon Nov 21 11:52:19 2011
DIA0 started with pid=8, OS id=7371
Mon Nov 21 11:52:19 2011
MMAN started with pid=9, OS id=7376
Mon Nov 21 11:52:19 2011
DBW0 started with pid=10, OS id=7381
Mon Nov 21 11:52:19 2011
LGWR started with pid=11, OS id=7386
Mon Nov 21 11:52:19 2011
CKPT started with pid=12, OS id=7391
Mon Nov 21 11:52:19 2011
SMON started with pid=13, OS id=7396
Mon Nov 21 11:52:19 2011
RECO started with pid=14, OS id=7401
Mon Nov 21 11:52:19 2011
MMON started with pid=15, OS id=7406
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Nov 21 11:52:19 2011
MMNL started with pid=16, OS id=7411
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 11:52:20 2011
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Nov 21 11:52:21 2011
Checker run found 1 new persistent data failures -
ORA-00205: error in identifying control file, check alert log for more inf
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.user11191992 wrote:
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.Please post the message in the alert-file as stated.
It can e.g. be that while copying the file permissions have been changed, making the files not readable for the oracle user
HTH
FJFranken -
ORA-00205: error in identifying control file while startup database
Dear Experts,
we are using Oracle 10g on RHEL5.4 64Bit ecc 6.0 with eph 4 i have moved all my sap data files along with Temp file.
when i startup my database getting error.
SQL> startup mount
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 306185108 bytes
Database Buffers 222298112 bytes
Redo Buffers 5844992 bytes
ORA-00205: error in identifying control file, check alert log for more info
when i checked initSID.ora then found old location of control file.
1)/oracle/SID/sapdata1/cntrl
2)/oracle/SID/origlogA/cntrl
3)/oracle/SID/origlogB/cntrl
i have manually changed location of control file.
1)/oracle/SID/sapdata10/cntrl
2)/oracle/SID/origlogA/cntrl
3)/oracle/SID/origlogB/cntrl
SQL> Create Pfile from Spfile;
File Created.
i would like to mount my database from Pfile plese help me i execute scripts below.
SQL> STARTUP MOUNT=/oracle/SID/ORACLE_HOME/dbs/initSID.ora
invalid startup option.
or suggest me some other way so that i can startup my Database.
with RegardsThanks,LOG of alert_SID.log control_files = /oracle/PRD/origlogA/cntrl/cntrlPRD.dbf, /oracle/PRD/origlogB/cntrl/cntrlPRD.dbf, /oracle/PRD/sapdata1/cntrl/cntrlPRD.dbf, control_file_record_keep_time= 30, Mon Nov 14 08:24:52 2011
CREATE DATABASE PRD CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/PRD/sapdata1/temp_1/temp.data1' SIZE 570M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/PRD/origlogA/log_g11m1.dbf',
'/oracle/PRD/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,GROUP 2 ('/oracle/PRD/origlogB/log_g12m1.dbf',
'/oracle/PRD/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,GROUP 3 ('/oracle/PRD/origlogA/log_g13m1.dbf',
'/oracle/PRD/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,GROUP 4 ('/oracle/PRD/origlogB/log_g14m1.dbf',
'/oracle/PRD/mirrlogB/log_g14m2.dbf') SIZE 50M REUSEMon Nov 14 08:24:53 2011Database mounted in Exclusive Mode
Mon Nov 14 08:25:06 2011Successful mount of redo thread 1, with mount id 1830841300
Assigning activation ID 1830841300 (0x6d206bd4) Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /oracle/PRD/origlogA/log_g11m1.dbf
Current log# 1 seq# 1 mem# 1: /oracle/PRD/mirrlogA/log_g11m2.dbf,m Successful open of redo thread 1
Mon Nov 14 08:25:06 2011 MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Nov 14 08:25:06 2011 SMON: enabling cache recovery
Mon Nov 14 08:25:06 2011
create tablespace SYSTEM datafile '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Mon Nov 14 08:25:09 2011
Incremental checkpoint up to RBA [0x1.3.0], current log tail at RBA [0x1.3.0]
Mon Nov 14 08:25:15 2011
Completed: create tablespace SYSTEM datafile '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Mon Nov 14 08:25:15 2011
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Nov 14 08:25:19 2011
CREATE UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Mon Nov 14 08:25:36 2011
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/PRD/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Mon Nov 14 08:25:36 2011
create tablespace SYSAUX datafile '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile '/oracle/PRD/sapdata1/sysaux_1/sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online -
ORA-00205: error in identifying control file,-Startup ASM db in PFA mode
Is there any oracle restriction for ASM database in PFA mode?
*[oracle@aveo:~]>cd $ORACLE_HOME/dbs*
*[oracle@aveo:~]>orapwd file=orapwQ102ASMA password=sys entries=10 force=y*
oracle@aveo:~]>sq
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 3 12:49:15 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select file_name from dba_data_files;
FILE_NAME
+OBTDG1/q102asma/datafile/system01.dbf
7 rows selected.
SQL> show parameter pass
NAME_COL_PLUS_SHOW_PARAM
TYPE
VALUE_COL_PLUS_SHOW_PARAM
remote_login_passwordfile
string
EXCLUSIVE
SQL> select from v$pwfile_users;*
USERNAME SYSDB SYSOP
SYS TRUE TRUE
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Now made changes in sqlnet.ora file.
oracle@aveo:admin]>pwd
/oracle/10.2.0/product/network/admin
*[oracle@aveo:admin]>cat sqlnet.ora*
sqlnet.authentication_services=(none)
*=oracle@aveo:admin]>sqlplus sys/sys as sysdba*
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 3 13:28:29 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 272629760 bytes
Fixed Size 2005736 bytes
Variable Size 184550680 bytes
Database Buffers 83886080 bytes
Redo Buffers 2187264 bytes
ORA-00205: error in identifying control file, check alert log for more info
It thows ORA-00205: error in identifying control file,
Edited by: user2015671 on 3 Sep, 2010 8:09 AMIn alert log it show below error message.
===================================================================
Sat Sep 4 13:06:38 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 1
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 155189248
large_pool_size = 4194304
java_pool_size = 25165824
resource_manager_plan = SYSTEM_PLAN
control_files = OBTDG1/q102asma/controlfile/control01.ctl, OBTDG1/q102asma/controlfile/control02.ctl, +OBTDG1/q102asma/controlfile/control03.ctl
db_block_size = 8192
db_cache_size = 67108864
db_2k_cache_size = 8388608
db_4k_cache_size = 8388608
compatible = 10.0.0.0.0
log_archive_dest = +OBTDG1
log_archive_format = %t_%s_%r.log
log_buffer = 2152448
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = rbs
remote_login_passwordfile= EXCLUSIVE
instance_name = Q102ASMA
background_dump_dest = /qa/data/obt/Q102ASMA/admin/bdump
user_dump_dest = /qa/data/obt/Q102ASMA/admin/udump
core_dump_dest = /qa/data/obt/Q102ASMA/admin/cdump
sort_area_size = 524288
db_name = Q102ASMA
open_cursors = 300
ifile = /qa/data/obt/Q102ASMA/admin/pfile/configQ102ASMA.ora
PMON started with pid=2, OS id=29642
PSP0 started with pid=3, OS id=29644
MMAN started with pid=4, OS id=29646
DBW0 started with pid=5, OS id=29648
LGWR started with pid=6, OS id=29650
CKPT started with pid=7, OS id=29652
SMON started with pid=8, OS id=29654
RECO started with pid=9, OS id=29656
MMON started with pid=10, OS id=29658
MMNL started with pid=11, OS id=29660
Sat Sep 4 13:06:40 2010
ALTER DATABASE MOUNT
Sat Sep 4 13:06:40 2010
Starting background process ASMB
ASMB started with pid=13, OS id=29663
Sat Sep 4 13:06:40 2010
ORA-00202: control file: '+OBTDG1/q102asma/controlfile/control01.ctl'
ORA-17503: ksfdopn:2 Failed to open file +OBTDG1/q102asma/controlfile/control01.ctl
ORA-15001: diskgroup "OBTDG1" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
Sat Sep 4 13:06:40 2010
ORA-205 signalled during: ALTER DATABASE MOUNT...
===================================================================
ASMCMD> pwd
+OBTDG1/Q102ASMA/controlfile
ASMCMD>
ASMCMD> ls -ltr
Type Redund Striped Time Sys Name
N control01.ctl => +OBTDG1/Q102ASMA/CONTROLFILE/Current.283.728141849
N control02.ctl => +OBTDG1/Q102ASMA/CONTROLFILE/current.292.728141859
N control03.ctl => +OBTDG1/Q102ASMA/CONTROLFILE/current.299.728141861
CONTROLFILE UNPROT FINE SEP 04 13:00:00 Y Current.283.728141849
CONTROLFILE UNPROT FINE SEP 04 13:00:00 Y current.292.728141859
CONTROLFILE UNPROT FINE SEP 04 13:00:00 Y current.299.728141861
===================================================================
I tried without Password file authentication then i am not getting error during database startup.
Why it is giving error for Password file authentication?
Thanks, -
Startup upgrade ORA-00205: error in identifying control file
Hi,
I am doing a manual upgrade from 10.2.04 to 11.2.03.
I have installed 11.2.0.3.
Ran utlu112i.sql
Copied TNSNAMES and LISTENER.ora,init.ora from 10g home to 11g home respective directories.
Commented all dump_dest paramteres in 11g init.ora and added diagnostic_dest parameter
exported all the varaiables as follows.
export ORACLE_HOME=/oracle/ora11203
export PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_SID=OMIGTEST
export TNS_ADMIN=$ORACLE_HOME/network/admin
export ORACLE_BASE=/oracle/ora11203/app/ora11203
Now when i try to start DB from the unix session where all of above variables are set,i am getting following issue.
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1636892672 bytes
Fixed Size 2183056 bytes
Variable Size 1090519152 bytes
Database Buffers 536870912 bytes
Redo Buffers 7319552 bytes
ORA-00205: error in identifying control file, check alert log for more info
Alert log says as below.
ORACLE_BASE from environment = /oracle/ora11203/app/ora11203
Thu Aug 23 15:03:36 2012
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/oracle/ora11203/dbs/cntrlOMIGTEST.dbf'
ORA-27037: unable to obtain file status
HPUX-ia64 Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...In init.ora of 11g (which is copied from 10g) ,i have commented our control file path entry.
Kindly assist me as i am doing upgrade for the first time.
Thanks
Edited by: user10698496 on Aug 24, 2012 2:47 AMHi,
Issue of sqlplus is solved after setting proper LD_LIBRARY_PATH.
But eve after that startup upgrade showing same error.
sqlplus '/as sysdba'
SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 23 16:22:16 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsSQL> startup upgrade
ORACLE instance started.
Total System Global Area 1636892672 bytes
Fixed Size 2183056 bytes
Variable Size 1090519152 bytes
Database Buffers 536870912 bytes
Redo Buffers 7319552 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i copy control file from 10g home and place in in 11g path and mention it in init.ora before upgrade?
Thanks -
ORA-00205: error in identifying control file..after installing ASM
Hi
I haveoracle database 10g running on a redhat4 mechine.
i have installed ASM and migrate my database to ASM.
I haven't any problem and everything was fine till i reboot the mechine for the first time after
installing ASM.
I got the ORA-00205: error in identifying control file, check alert log for more info
error when database was restarting
any one can help me out of this problem
many many thanks in advanceeventually I figured out what the problem is.
The problem is about my dbora file used to start my database.
this is the whole story!!!
I have a oracle 10gR2 installed on Redhat linux AS 4.
I have configured my database to work on ASM.All the configuration have set properly
and every thing is fine except the Automatic starting the database in time
the mechine is restarted.
when i restart the mechine with nothing in dbora(used to automatically start the database)
and start everything after logging into oracle user(listener ,database,Enterprise manager)
no problem(i can see my ASM instance database instance throught Enterprise managaer).
but when i use dbora to do that i get this error appear in enterprise manager
ORA-12528: TNS:listener: all appropriate instances are blocking new connections (DBD ERROR: OCIServerAttach)
this is the content of dbora:
s script is intended to allow the automated
# startup and shutdown of an oracle database server.
# Author: Sean O'Donnell <[email protected]>
# the user that oracle runs as (default: oracle)
ORACLE=oracle
# database instance id
ORACLE_SID=orcl
# ORACLE_HOME (file system) path
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
PATH=${PATH}:$ORACLE_HOME/bin
export ORACLE_SID ORACLE_HOME PATH
case $1 in
'start')
su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl start"
su - $ORACLE -c "$ORACLE_HOME/bin/dbstart"
su - $ORACLE -c "$ORACLE_HOME/bin/emctl start dbconsole"
'stop')
su - $ORACLE -c "$ORACLE_HOME/bin/emctl stop dbconsole"
su - $ORACLE -c "$ORACLE_HOME/bin/dbshut"
su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl stop"
echo "usage: $0 {start|stop}"
esac
exit
What do u think could be the reason?!!!!
thank you in advance -
Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
DivyaHi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
ORA-00205: error in identifying control file
Hi DBAs,
I am using Oracle 11g R2, My db is up and running, I thought to Multiplexing the controlfile in another location. My DB is up with help of sp file.
While it was up, I have given a comment like this, without specifying the filename.ctl , I wrongly mentioned the Path alone, now it has been updated in spfile.
SQL> alter system set control_files='E:\APP\ADMINISTRATOR\ORADATA\BASKAR\CONTROLFILE\' scope=spfile;
System altered.
Then, When i was restarting my db its throwing an error, control file is missing.
Then I thought to run my db with pfile, then i tried to chang the controlfile parameter in SPFILE, it showing as like below one,
SQL> alter system set control_files='E:\app\Administrator\oradata\BASKAR\O2_MF_7CSK1379_.CTL' scope=spfile;
alter system set control_files='E:\app\Administrator\oradata\BASKAR\O2_MF_7CSK1379_.CTL' scope=spfile
ERROR at line 1:
ORA-32001: write to SPFILE requested but no SPFILE specified at startup
Any one can let me know? how do i change my controlfile parameter in spfile.
How do i start my db with SPFILE.Then I thought to run my db with pfile, then i tried to chang the controlfile parameter in SPFILE, it showing as like below one,
SQL> alter system set control_files='E:\app\Administrator\oradata\BASKAR\O2_MF_7CSK1379_.CTL' scope=spfile;
alter system set control_files='E:\app\Administrator\oradata\BASKAR\O2_MF_7CSK1379_.CTL' scope=spfile
ERROR at line 1:
ORA-32001: write to SPFILE requested but no SPFILE specified at startupYour database is currently running with the pfile. Check the value of control_files now
show parameter control_files
Make necessary changes in you pfile, create an spfile from your pfile and later start the database with the newly created spfile -
ORA-00205 error leading to ORA-00470 LGWR process terminated with error.
Hello Gurus,
One of our database had gone down, I tried to bring it up. When tried to do so it gave follwoing errot ORA-00205 error in identifying control file, check alert log ..... When I checked alter log entried I found a new error ORA-00470 LGWR process terminated with eror.
All my control files are intact where supposed to be, so are all redo log files. Please could any would help parity at my end.
In need for restoring my database at the earliest.
Regards
ShivaCould you please post the full alert.log contents when the database starts up ?
Are you really sure that all your control files are OK ?
ORA-00205 error in identifying controlfile, check alert log for more info
Cause: The system could not find a control file of the specified name and size.
Action: One of the following:
Check that the proper control file name is referenced in the CONTROL_FILES initialization parameter in the initialization parameter file and try again.
When using mirrored control files, that is, more than one control file is referenced in the initialization parameter file, remove the control file name listed in the message from the initialization parameter file and restart the instance. If the message does not recur, remove the problem control file from the initialization parameter file and create another copy of the control file with a new file name in the initialization parameter file. -
Experts, I created repository first with the name of rep_bkd_dev (Unicode),Then my lead told that we need to create RS with MS Latin,So am trying to creating a new repository with the name of dev_repository and it is showing the below error.Can some one help me out here. Regards,
hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file
-
I am having trouble with License Server / Daemon Manager when running LMS 3.1..
I have looked through this forum and checked that the following services are set correctly to Manual
CiscoWorks ANI database engine
CiscoWorks RME NG database engine
CiscoWorks Tomcat Servlet engine
CiscoWorks Web Server
CWAWFEngine database engine
CWCS Cmf database engine
DFM dfmEpm database engine
DFM dfmInv database engine
DFM dfmFh database engine
OpxXMLRuntime
I have triedshutting down the Daemon Manager and forcing the databases to close down (hoping that the transaction log might be the problem but so far no joy.. Was running okay for some months on Windows 2003 as a VM.
Packages installed are as follows...
Just about to give up and do a fresh install....any assistance would be appreciated.
Many thanks, Peter.
Name
Version
License Status
Size
CiscoWorks Common Services
3.2.0
Licensed
Not applicable
Campus Manager
5.1.0
Purchased
100
CiscoView
6.1.8
Licensed
Not applicable
CiscoWorks Assistant
1.1.0
Licensed
Not applicable
Device Fault Manager
3.1.0
Purchased
100
Internetwork Performance Monitor
4.1.0
Purchased
100
Integration Utility
1.8.0
Licensed
Not applicable
LMS Portal
1.1.0
Licensed
Not applicable
Resource Manager Essentials
4.2.0
Purchased
100It looks like you're seeing CSCte49301. Follow the release note steps to solve this:
Symptom:
The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command). Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
Conditions:
This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager.
Workaround:
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.
Maybe you are looking for
-
I have tried everything and I still cannot get Itunes to download onto my computer. When I try to uninstall it I get the error message of The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter
-
Table Import Data - "Insert script" - National characters
Hi all, it looks like that there is a problem with support of national characters in imported data file when method "Insert script" is chosen. Table -> Import Data -> Open datafile "csv". As far as in the preview window I'm seeing properly displayed
-
Hi Experts, I have a requirment that before closing a project in system means before changing the status of a project from REL to TECO or CLSD , all user defined fields should get populated with default values. Please let me know how to achieve this
-
I have a page http://ebogott.com/index08more.php that is the prototype new home page for my site. The "last updated..." line appers to the right of the XML table ONLY in OPERA. Everywhere else, it aligns correctly. I can find no code problems. The
-
Installing Oracle Data Integratior Planning Adapter Assistance
Does any know how to install the Planning Adapter for ODI? I cannot find any documentation that actually explains how to do the install. The only documentation I can find on the Hyperion site is a README file. The ODI installation and user guide do n