ORA-00600 on update

Hi all,
I´m trying to do a update, but I got the error:
UPDATE tbl_trip SET code_vechicle = UPPER(code_vechicle);
UPDATE tbl_trip SET code_vechicle = UPPER(code_vechicle)
ERROR at line 1:
ORA-00600: internal error code, arguments: [4512], [], [], [], [], [], [], []I´m using the oracle with Linux red hat. Follows the version:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Linux: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - ProductionIs this a bug in this version?
How can I solve this?
thank you very much!!!!

Go here for the oracle 7445/600 troubleshooter and follow the instructions to fill in the blanks. If this does not help, open an iTAR.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12090908377143231594::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,153788.1,1,0,1,helvetica

Similar Messages

While updating a table i am getting ORA-00600 error.

Hi all,
While updating a table i am getting the following:
**SQL Error: ORA-00600: internal error code, arguments: [qkebCreateConstantOpn1], [], [], [], [], [], [], [], [], [], [], []**
**00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"**
I am not getting how to proceed on this. Please guide me.
Thanks,
Ritesh

While performing some unspecified action (no DML) on an unknown table (no DDL) in an unknown version and edition of the Oracle database you had an untrapped Oracle exceptions.
There are too many unknowns to help you beyond recommending you open an SR at MyOracleSupport.

ORA-00600: internal error code while using UpdateXML to update xml content

Hi,
I have been using the UpdateXML command to replace content of xml stored in XMLType. It was working absolutely fine.
Below is the query:
UPDATE temp d SET d.message_content = updateXML(d.message_content,'//*[.="Test" ]/text()','"Test123"') WHERE existsNode(d.message_content,'//*[.="Test"]')=1";
But now i'm getting an exception as follows:
ORA-00600: internal error code, arguments: [qmcxeUpdateXml:2.1], [], [], [], [], [], [], []
The table uses a Free Test Index.
I searched the forum and found from the given link https://forums.oracle.com/forums/thread.jspa?threadID=2352772 that corrupted Index may be the cause of this problem. I'm still clueless :(
Can someone help me?

Hi sprightee,
That thread you found seems to be a different problem (Ora-600 argument is different)
I think you have hit bug 6811908, at least if Odie is correct about your version.
Bug says No workaround - Fixed in 11.1.0.8
Regards
Peter

Problem in UPDATE with EXTRACTVALUE : ORA-00600

Hi all,
I have some trouble with this update query :
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Sender/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"'),
       ems_dn_dest = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Receiver/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"'),
       ems_reference_tech = EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/SenderReference', 'xmlns="urn:swift:saa:xsd:saa.2.0"')
WHERE ems_id = 1130;I get this error message :
ORA-00600: code d'erreur interne, arguments : [koklismem111: BFILE locator], [], [], [], [], [], [], [], [], [], [], []But if I do this :
SELECT EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Sender/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS a,
       EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/Receiver/DN', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS b,
       EXTRACTVALUE (ems_xml, '/DataPDU/Header/Message/SenderReference', 'xmlns="urn:swift:saa:xsd:saa.2.0"') AS c
FROM enveloppe_message
WHERE ems_id = 1130;It's ok and I get these datas :
a : ou=abc,ou=ghf,o=bvhdjdie,o=lkljg
b : ou=dfg,ou=fkd,o=nbjfkkdk,o=bnfjd
c : jkldfjsdlflsnvkllkfkfllcklqsjkckldand thus, this query become ok ????
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = 'ou=abc,ou=ghf,o=bvhdjdie,o=lkljg',
       ems_dn_dest = 'ou=dfg,ou=fkd,o=nbjfkkdk,o=bnfjd',
       ems_reference_tech = 'jkldfjsdlflsnvkllkfkfllcklqsjkckld'
WHERE ems_id = 1130;Does anyone have some idea ????
Thanks.

Thanks a lot Marco for the link on the FAQ.
But I don't understand how to use a non default namespace... sorry!
Finally, this query is okay :
SELECT xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Sender/DN' passing ems_xml as "p" returning content) as varchar2(4000)) AS a,
       xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Receiver/DN' passing ems_xml as "p" returning content) as varchar2(4000)) AS b,
       xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/SenderReference' passing ems_xml as "p" returning content) as varchar2(4000)) AS c
FROM enveloppe_message
WHERE ems_id = 1130;But this one, not !
UPDATE enveloppe_message
   SET ems_date_modification = SYSDATE,
       ems_login_modification = 'pipo',
       ems_dn_emet = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Sender/DN' passing ems_xml as "p" returning content) as varchar2(4000)),
       ems_dn_dest = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/Receiver/DN' passing ems_xml as "p" returning content) as varchar2(4000)),
       ems_reference_tech = xmlcast(xmlquery('declare default element namespace "urn:swift:saa:xsd:saa.2.0"; $p/DataPDU/Header/Message/SenderReference' passing ems_xml as "p" returning content) as varchar2(4000))
WHERE ems_id = 1130;I get the same error :
ORA-00600: code d'erreur interne, arguments : [koklismem2: insufficient locator len], [0], [86], [], [], [], [], [], [], [], [], []Maybe these optimizations don't solve my initial problem !?

ORA-00600: xspggepGenPSErase03 during AW UPDATE

Hello,
While refreshing a cube we got this ora - 600 error.
ORA-37162: OLAP error
XOQ-00703: error executing OLAP DML command "(UPDATE GLOBALDWOLAP.GLOBALHEALTHDWD : ORA-37605: error during OLAP AW UPDATE
ORA-00600: internal error code, arguments: [xspggepGenPSErase03], [], [], [], [], [], [], [], [], [], [], []
We know this is an AW corruption and we tried to recreate the AW through export and import as explained in document 742375.1 in Oracle Support. However, when trying to delete cubes or dimensions from the Analytic Workspace Manager or using pl/sql code (dbms_cube.import_xml) in order to delete the workspace itself we get the same error!
Our db version is 11.2.0.2 and we are using AWM 11.2.0.2.0B standalone.
Is there any way to delete the Analytic Workspace apart from dropping the OLAP user?
We 've already posted an SR for this, but a workaround would be appreciated as this corruption occured in our production environment,
Thank you,
Vicky

Vicky,
Check Metalink Note 1078454.1.

ORA-00600: internal error code after Linux update

Hi,
I just updated openSuSE from version 10.2 to 11.0 using the online repositoties. It seemed to keep all of my Oracle 10.2 directories and files intact. The Listener starts just fine, but the DB starts and then disconnects...
SQL*Plus: Release 10.2.0.1.0 - Production on Mi Sep 17 16:41:12 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> ORA-00600: internal error code, arguments: keltnfy-ldmInit, 46, 1], [, ], [, ], [
SQL> Disconnected
I've checked /etc/hosts. It contains the exact same info as my archived copy (that I saved before updating Linux). My /etc/profile.local file is also exactly the same; all pertinent variables are exported. So can someone please give me some other reasons for why the DB would disconnect?
Thanks for your replies!

You can verify if your system can lookup its hostname using ping:
[root@cfengine ~]# hostname
cfengine
[root@cfengine ~]# ping -c 1 cfengine
PING cfengine (10.0.0.1) 56(84) bytes of data.
64 bytes from cfengine (10.0.0.1): icmp_seq=1 ttl=64 time=0.026 ms
--- cfengine ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms
Above example shows a hostname (cfengine) which could be resolved; a hostname is used and the ping utility was able to resolve the ip address (10.0.0.1). Please mind that the actual function of the ping utility is to test host connectivity using the ICMP protocol, but because ping needs to resolve the ip address of a hostname to do so, it can be used to see if a hostname exists. There are much other methods to do so.
[root@cfengine ~]# ping -c 1 nonexistent
ping: unkown host nonexistent
Above example shows a hostname (nonexistent) which could not be resolved.
If a hostname can not be resolved, the hostname should be made resolvable. The most easy way to do so is by adding the ip address and hostname to /etc/hosts:
[root@cfengine ~]# ifconfig | grep inet
inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe08::a00:27ff:fe40:ec86/64 Scope:Link
inet addr:127.0.0.1 Mast:255.0.0.0
inet6 addr: ::1/128 Scope:Host
The ip address, 10.0.0.1 in my case. Next, put this ip address and the hostname in /etc/hosts:
[root@cfengine ~] echo "10.0.0.1 cfengine" >> /etc/hosts
Try ping again to see if the hostname can be resolved:
[root@cfengine ~]# ping -c 1 cfengine
PING cfengine (10.0.0.1) 56(84) bytes of data.
64 bytes from cfengine (10.0.0.1): icmp_seq=1 ttl=64 time=0.026 ms
--- cfengine ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.026/0.026/0.026/0.000 ms

ORA-00600 in AQ background job

Hi all,
I am getting an ORA-00600 in AQ background job responsible for dequeuing messages.
The trace output is as follows:
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kwqidjqp0], [], [], [], [], [], [], []
Current SQL statement for this session:
DECLARE job BINARY_INTEGER := :job; next_date DATE := :mydate; broken BOOLEAN := FALSE; BEGIN sys.dbms_aqadm_sys.register_driver(); :mydate := next_date; IF broken THEN :b := 1; ELSE :b := 0; END IF; END;
----- PL/SQL Call Stack -----
object line object
handle number name
6713D69C 7249 package body SYS.DBMS_AQADM_SYS
6713D69C 7280 package body SYS.DBMS_AQADM_SYS
66EB50B4 1 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
I have job_queue_processes set to 4 and aq_tm_processes set to 2.
Has anyone seen this? Please help.
Thanks,
Atul

May be a bit late to help the original posters, but just for reference, this looks very similar to the following described in Metalink:
Bug 3033868 OERI[kwqidjqp0] from DBMS_AQADM_SYS.REGISTER_DRIVER
This note gives a brief overview of bug 3033868.
The content was last updated on: 20-JAN-2004
Affects:
Range of versions believed to be affected     Versions < 10.1.0.2
Versions confirmed as being affected
* 9.0.1.4
* 9.2.0.4
Platforms affected     Generic (all / most platforms affected)
Fixed:
This issue is fixed in
* 9.2.0.5 (Server Patch Set)
* 10.1.0.2 (Base Release)
Edited by: Anthony Maslowski on Feb 5, 2010 1:26 PM

ORA-00600: internal error code, arguments: [25012], [5], [524]

Hello,
We are getting ORA-00600: internal error code, arguments: [25012], [5], [524], [], [], [], [], [] in alertsid.log file.
Content of /oracle/PRD/saptrace/usertrace/ora_1220283.trc
=======================================================
SESSION ID:(19.3) 2008-06-26 10:18:59.083
2008-06-26 10:18:59.083
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [25012], [5], [524], [], [], [], [], []
Current SQL statement for this session:
UPDATE "JEST" SET "INACT" = :A0 , "CHGNR" = :A1 WHERE "MANDT" = :A2 AND "OBJNR" = :A3 AND "STAT" = :A4
=======================================================
Please suggest what can be cause and solution of this problem.
- Nirav
Edited by: Nirav Shah on Jul 18, 2008 12:59 PM

Hello Nirav,
which oracle version are you using?
Metalinknote #429471.1 describes different cases.
Regards
Stefan

ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [

Hi All,
I Got ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [], [], [], [], [], []
today i check for Oracle knowledge but i can see only until 9i version.
I am pasting my OS AND database version below
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I didn't find any knowledge for my database base version please any one help me on this
Thanks in Advance
Kind Regards
Venkat

980323 wrote:
Hi Vishal,
No not yet i will paste my trace file please can you have a look on it
Dump continued from file: /oracle/admin/diag/rdbms/ewahed13/EWAHED13/trace/EWAHED13_ora_14503.trc
ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [], [], [], [], [], []
========= Dump for incident 22995 (ORA 600 [6122]) ========
*** 2013-05-16 12:36:32.933
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=6zcs0sc3nhj85) -----
UPDATE "CS_ACTUALS"."APPLICATIONSTATE" SET "DEFINITION"=:1,"DEFINITIONDT"=:2 WHERE "DEFINITIONDT"=:3 AND "ROWID"=:4 RETURNING ROWID into :5Depending upon the platform version see bugs:
Bug 12926930
Bug 15907953
Bug 16374276
I thinks its the Index block corrupt - So you have following options
1) Apply the patch - which is possible by seeing the exact bud
2) Try to recover the block
3) Try to drop and recreate the index - If its a non sys object.
You need to check and populate V$DATABASE_BLOCK_CORRUPTION for blocks which are marked corrupt.
Use dbv,rman validate commands to populate V$DATABASE_BLOCK_CORRUPTION view
Use - Identify the corruption extension using RMAN/DBV/ANALYZE etc [ID 836658.1] note for identifying the blocks that are corrupt.

ORA-00600: internal error code, arguments: [upsRowVec4] in oracle 11g R2

Hi
Getting ORA-00600: internal error code, arguments: [upsRowVec4] error while executing merge statement in oracle 11gR2
MERGE INTO app_mast_out OUT USING
(SELECT
/*+index(ip75) index(out1)*/
DISTINCT ip75.cab_type,
out1.rowid rw
FROM app_mast_ip0075t1 ip75,
app_mast_out out1
WHERE OUT1.de026 = SUBSTR (ip75.mcc, 2, 4)
AND deleted ='N'
AND OUT1.PROCESS_ID ='B14.280410.0367'
) cab ON(OUT.PROCESS_ID='B14.280410.0367' AND out.rowid=cab.rw)
WHEN MATCHED THEN
UPDATE SET out.CAB_TYPE=cab.cab_type
trace file output
Incident 8907 created, dump file: /u01/app/oracle/diag/rdbms/geni11g/geni11g/incident/incdir_8907/geni11g_ora_19900_i8907.trc
ORA-00600: internal error code, arguments: [upsRowVec4], [], [], [], [], [], [], [], [], [], [], []
incident trace file output
Dump continued from file: /u01/app/oracle/diag/rdbms/geni11g/geni11g/trace/geni11g_ora_19900.trc
ORA-00600: internal error code, arguments: [upsRowVec4], [], [], [], [], [], [], [], [], [], [], []
========= Dump for incident 8907 (ORA 600 [upsRowVec4]) ========
*** 2010-04-28 13:22:56.245
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=8ccz9u3h32tq7) -----
MERGE INTO APP_MAST_OUT OUT USING (SELECT /*+index(ip75) index(out1)*/ DISTINCT IP75.CAB_TYPE,OUT1.ROWID RW FROM APP_MAST_IP0075T1 IP75,APP_MAST_OUT OUT1 WHERE OUT1.DE026 = SUBSTR (IP75.MCC, 2, 4) AND DELETED='N' AND OUT1.PROCESS_ID=:B1 ) CAB ON(OUT.PROCESS_ID=:B1 AND OUT.ROWID=CAB.RW) WHEN MATCHED THEN UPDATE SET OUT.CAB_TYPE=CAB.CAB_TYPE
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a38469d8 86 procedure FINTECH.SPR_MAST_OUTFEE_DATA
0x1a4ac12b0 388 procedure FINTECH.SPR_MAST_OUTLEGACYCATEGORIZE
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
skdstdst()+36 call kgdsdst() 000000000 ? 000000000 ?
7FBFFE41B8 ? 000000001 ?
7FBFFE86B8 ? 000000000 ?
ksedst1()+98 call skdstdst() 000000000 ? 000000000 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksedst()+34 call ksedst1() 000000000 ? 000000001 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
dbkedDefDump()+2736 call ksedst() 000000000 ? 000000001 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksedmp()+36 call dbkedDefDump() 000000003 ? 000000002 ?
7FBFFE41B8 ? 000000001 ?
000000000 ? 000000000 ?
ksfdmp()+64 call ksedmp() 000000003 ? 000000002 ?
7FBFFE41B8
please give the solution as it is live environment

Hi,
how does a update work? I see now a merge with only an update, so you can rewrite it to an update statement. And you don't need the distinct, rowid makes it already unique.
Herald ten Dam
htendam.wordpress.com

Error : ORA-00600 while executin query in WLS 6.1

Hi,
This is in regard to a error coming at the time of execution of a query, thru the application installed on Web Logic Server 6.1
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
The same application configured on Web Logic server 8.1, is running perfectly.
Please suggest a resolution to this problem
Regards
Atul Verma

The SQL statement generated by TopLink is as follows -
UPDATE PR_SUPP SET CNTC_PRSN_NAME = ''
, REMK = 'Remark 123 !', LAST_CHNG_DTTM = {ts '2002-11-29 10:59:56.0'} WHERE ((S
UPP_CODE = 'A0001') AND (LAST_CHNG_DTTM = {ts '2002-11-29 10:46:01.0'}))
The coloumn name in the generated statement conform to the coloumn names in the table. The exception is being thrown for all 'update' queries for all objects in the application.

ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [

Hi
I was trying to delete a row in one of the tables in the database and i got the following error:
ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [], []Also i got a message in OEM as follows:
ORA-error stack (00600[25027]) logged in /var/oracle/Storage1/mydb/logs/bdump/alert_snos.logand when i looked at this log file:
Thu Jun 11 22:19:40 2009
Errors in file /var/oracle/Storage1/mydb/logs/udump/snos_ora_23891.trc:
ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [], []
Thu Jun 11 22:20:09 2009
Errors in file /var/oracle/Storage1/mydb/logs/udump/snos_ora_23855.trc:
ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [], []
Thu Jun 11 22:20:48 2009
Errors in file /var/oracle/Storage1/mydb/logs/udump/snos_ora_23855.trc:
ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [], []
Thu Jun 11 22:48:38 2009 and when i opened the trc files i couldn't figure out whats going on!
The delete statment was so simple:
delete from SFLSRCSYSTEMS
where id = 1I still want to delete that row and don't know what to do.. Please help
Swaid

Subject:      ORA-600 [25027]
     Doc ID:      284433.1      Type:      REFERENCE
     Modified Date :      30-APR-2009      Status:      PUBLISHED
Note: For additional ORA-600 related information please read Note 146580.1
PURPOSE:
This article represents a partially published OERI note.
It has been published because the ORA-600 error has been
reported in at least one confirmed bug.
Therefore, the SUGGESTIONS section of this article may help
in terms of identifying the cause of the error.
This specific ORA-600 error may be considered for full publication
at a later date. If/when fully published, additional information
will be available here on the nature of this error.
SUGGESTIONS:
If the Known Issues section below does not help in terms of identifying
a solution, please submit the trace files and alert.log to Oracle
Support Services for further analysis.
Known Issues:
Bug# 7263842 * See Note 7263842.8
* This bug is alerted in Note 784633.1
ORA-955 during CTAS / OERI [ktsircinfo_num1] / dictionary inconsistency for PARTITIONED Tables
Fixed: 10.2.0.5, 11.2, 10.2.0.4.P19
Bug# 7190270 * See Note 7190270.8
* This bug is alerted in Note 784633.1
Various ORA-600 errors / dictionary inconsistency from CTAS / DROP
Fixed: 10.2.0.5, 10.2.0.4.P09
Bug# 6666915 See Note 6666915.8
OERI[25027] / dictionary corruption from concurrent partition DDL
Fixed: 10.2.0.5, 11.1.0.7, 11.2
Bug# 4925342 See Note 4925342.8
OERI [25027] / OERI [25012] on IOT analyze estimate statistics
Fixed: 9.2.0.8, 10.2.0.3, 11.1.0.6
Bug# 4310371 See Note 4310371.8
OERI [25027] from concurrent startup / shutdown in RAC
Fixed: 9.2.0.8
Bug# 4177651 See Note 4177651.8
Row migration within a MERGE may OERI[25027]
Fixed: 10.2.0.1
Bug# 4020195 See Note 4020195.8
OERI 25027 can occur in RAC accessing transported tablespace
Fixed: 10.1.0.5, 10.2.0.1
Bug# 3963135 See Note 3963135.8
OERI[kcbgcur_3] / OERI:25027 during bitmap index updates
Fixed: 10.1.0.5, 10.2.0.1
Bug# 3829900 See Note 3829900.8
OERI[25027] possible accessing index in 10g
Fixed: 10.1.0.4, 10.2.0.1
Bug# 2942185 See Note 2942185.8
Corruption occurs on direct path load into IOT with ADDED columns
Fixed: 9.2.0.6, 10.1.0.4, 10.2.0.1
Bug# 2926182 See Note 2926182.8
OERI[25027] / ORA-22922 accessing LOB columns in IOT in AFTER UPDATE trigger
Fixed: 9.2.0.5, 10.1.0.2

Strange errors ORA-02068 ORA-00600

Hi,
I have a strange error in my mapping, that I have never heard before.
In the source schema, I have a table that I check, that gives me a list of PK in order to know which lines I have to take in the other table of the schema.
At the end of the mapping, I have to UPDATE the table in order not to take the lines when the mapping is executed the next day : there is a field which is a flag that I have to update from 0 to 1.
But the mapping never manage to UPDATE all the table, it gives me these errors :
ORA-00600 : internal error code, arguments : : [kdoorp-1], [15], [0], [], [], [], [], []
ORA-02068 : following severe error from [DB_LINK_NAME]
I made a mapping which only update the table and it doesn't work anymore. What is strange is that it stops the first time after 1003 rows updated, the second time 2007, the third 4014, etc... ? I don't understand ???!!
Can someone help me ?
Thanks,
Nico

There are some bugs reported against Oracle 9.2.0.8 with similar error:
bug 5703193 and 6020413 which is unpublished.
I can not recommend other than contacting support.
Regards,
Robert

ORA-00600: internal error code, arguments: [kghGetHpSz1], [0x4B0FE54], [],

Dear All,
Our's is
Windows 2000 Server,Oracle 9.2.0.4 version,1.5 GB RAM.
(two instances are running , devlopment DB)
One day , suddenly i am facing this error.
ORA-00600: internal error code, arguments: [kghGetHpSz1], [0x4B0FE54], [], [], [], [], [], []
After this i restarted the Db ,again it starts working normally.
After that ,Till now i didnt faced any problem.
I want to know what is the cause and permanent solution to rectify this......
Please suggest solution.
Regards
Dhamodharan.L

Hi,
Kindly upload the alert file and trace files relevant to this to oracle.. for faster solutions (and update your cell number )
Thanks
--Raman

ORA-00600: kglgtbo1 and kcfrbd_3

Hello,
I am running into two different ORA-00600 errors performing the same basic Insert statement. The insert is happening through our Java application. The process copies data from one database to another. There are clob values involved. We are using prepared statements for the insert. Both servers are running on Windows.
On my development machine I get:
ORA-00600: internal error code, arguments: [kglgtbo1], [0xB1FB30B0], [], [], [], [], [], [], [], [], [], []
On the production server I get:
ORA-00600: internal error code, arguments: [kcfrbd_3], [5], [158755], [1], [7680], [7680], [], [], [], [], [], []
I have Googled a bunch and been through Oracle support to try to find a resolution. In support I found information but the patches are for the standard Oracle Database and not XE. From what I read I think it may be related to the space allocated for the db. Here is part of the create script we use where we create the tablespace and user:
-- Create Tablespace
CREATE TABLESPACE &database_tablespace
DATAFILE '&database_datafile_path' size 60M
AUTOEXTEND ON
EXTENT MANAGEMENT LOCAL AUTOALLOCATE;
-- Create User
CREATE USER &database_user IDENTIFIED BY &database_password
DEFAULT TABLESPACE &database_tablespace TEMPORARY TABLESPACE &temporary_tablespace;
GRANT RESOURCE, CONNECT, CREATE VIEW TO &database_user;
-- connect as user
connect &database_user/&database_password@&database_alias
-- Create Objects
Do you see anything wrong with the above script?
Thank you in advance for any help.
Rudy

Update:
I updated the Java code to not include any column of type CLOB in the insert or update statements and the application works as expected. Based on this I expect the above errors to be related to the CLOB data types.
I hope this provides more insight.
Thank you
Rudy

ORA-00600 on update

Similar Messages

Maybe you are looking for