ORA-00998: must name this expression with a column alias

Dear all,
create table mebs_temp10 tablespace mebs_tempt nologging as SELECT TRUNC(meddate) as meddate, ctype , btext btext, COUNT (1), sum(duration/60), SUM (bamount) FROM mells.hcalls WHERE meddate >= '01-JAN-2009' and meddate < '01-MAY-2009' GROUP BY meddate, ctype, btext
ERROR at line 1:
ORA-00998: must name this expression with a column alias
I tried giving a alias for the columns ctype , btext .. but helpless. which column to be aliased ?
Kai

Try this...
create table
mebs_temp10 tablespace mebs_tempt nologging as
SELECT
TRUNC(meddate) as meddate,
ctype,
btext btext,
COUNT (1) count_field,
sum(duration/60) sum_duration,
SUM (bamount) sum_bamount
FROM mells.hcalls WHERE meddate >= '01-JAN-2009' and meddate < ' GROUP BY meddate, ctype, btext

Similar Messages

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

I HAVE A PREPAID PHONE. WHEN I TRAVEL TO MALAYSIA I MUST BRING THIS PHONE WITH ME. CAN I BUY SIMS CARD AND USE IT? I AM TOLD THAT I CAN DO SO.

I HAVE A PREPAID PHONE AS I GO. WHEN I TRAVEL TO MALAYSIA, I AM GOING TO BRING THIS PHONE WITH ME. CAN I BUY SIMS CARD OVER THERE AND ASK THE SELLER TO PUT IN MINUTES FOR ME? WHO CAN ANSWER THIS QUESTION?

That sounds like a great trip urgent! Ann154 asked a great question. Please share which prepaid device you have. 3G Prepaid Phone in a Box (PIB) is restricted for use with prepaid service for 6 consecutive months after activation, and is locked to the VZW network for 12 months after activation.
• After 6 consecutive months, the restriction to prepaid service is automatically removed.
• After 12 months, customers can dial *611 from their VZW prepaid phones or 888-294-6804, to receive the programming code to unlock their phones.
• Non-PIB prepaid devices are not locked, but may require a program code to use with another carrier - typically "000000" or "123456." Sim lock does not apply to any VZW 4G LTE device with global roaming capabilities. These devices are able to be used with a third party local sim card without any additional steps to unlock the device. Thank you.
TominqueBo_VZW
Follow us on Twitter @VZWSupport

ORA-00939 when creating XML table with Virtual Columns

Getting error on creating table with VIRTUAL COLUMNS:
Error at Command Line:4 Column:31
Error report:
SQL Error: ORA-00939: too many arguments for function
00939. 00000 - "too many arguments for function"
Without VIRTUAL COLUMNS works fine.
Where to start?
Is it possible to add Virtual Columns after a table is created?
CREATE TABLE TDS_XML OF XMLType
XMLSCHEMA "http://xmlns.abc.com/tds/TDSSchemaGen2.xsd"
ELEMENT "TDSTestData"
VIRTUAL COLUMNS
TESTID AS (
    XMLCast(
              XMLQuery('declare default element namespace "http://xmlns.abc.com/tds/TDSSchemaGen2.xsd"; /TDSTestData/TestID' PASSING OBJECT_VALUE RETURNING CONTENT) AS VARCHAR2(32)
   )SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 30 20:17:29 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for 64-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL>

victor_shostak wrote:
Figured, Virtual Columns work only for Binary XML.They are only supported, currently, for Binary XML.

Create materialized view get ora-00998 error cause by subquery

hi all,
my create statement as follow,
create materialized view MV_DM_DIM_DEALER01
Build deferred
Refresh complete
ON DEMAND
Enable query rewrite
as
select a.dealer_no,a.sk_period from DM_DIM_DEALER a
where A.SK_PERIOD=201210 and a.dealer_no in (select dealer_No from dm00_fav_dealer)
ORA-00998: must name this expression with a column alias
so what's the problem?
thx all

>
my create statement as follow,
create materialized view MV_DM_DIM_DEALER01
Build deferred
Refresh complete
ON DEMAND
Enable query rewrite
as
select a.dealer_no,a.sk_period from DM_DIM_DEALER a
where A.SK_PERIOD=201210 and a.dealer_no in (select dealer_No from dm00_fav_dealer)
ORA-00998: must name this expression with a column alias
so what's the problem?
>
Well since the error is 'ORA-00998: must name this expression with a column alias' you might try naming your expressions with aliases
select a.dealer_no dealer_no,a.sk_period sk_period from DM_DIM_DEALER a

Selecting from a SQL Server 2005 with long column names ( 30 chars)

Hi,
I was able to set up a db link from Oracle 11.2.0.1 to SQL Server 2005 using DG4ODBC.
My problem is that some column names in the Sql Server are longer than 30 chars and trying to select them gives me the ORA-00972: identifier is too long error.
If I omit these columns the select succeeds.
I know I can create a view in the sql server and query it instead of the original table, but I was wondering if there's a way to overcome it with sql.
My select looks like this:
select "good_column_name" from sometable@sqlserver_dblink -- this works
select "good_column_name","very_long_column_name>30 chars" from sometable@sqlserver_dblink -- ORA-00972Thanks

I tried creating a view with shorter column names but selecting from the view still returns an error.
create view v_Boards as (select [9650_BoardId] as BoardId, [9651_BoardType] as BoardType, [9652_HardwareVendor] as
HardwareVendor, [9653_BoardVersion] as BoardVersion, [9654_BoardName] as BoardName, [9655_BoardDescription] as BoardDescription,
[9656_SlotNumber] as SlotNumber, [9670_SegmentId] as SegmentId, [MasterID] as MasterID, [9657_BoardHostName] as BoardHostName,
[9658_BoardManagementUsername] as BoardManagementUsername, [9659_BoardManagementPassword] as BoardManagementPassword,
[9660_BoardManagementVirtualAddress] as BoardManagementVirtualAddress, [9661_BoardManagementTelnetLoginPrompt] as
MANAGEMENTTELNETLOGINPROMPT, [9662_BoardManagementTelnetPasswordPrompt] as MANAGEMENTTELNETPASSPROMPT,
[9663_BoardManagementTelnetCommandPrompt] as MANAGEMENTTELNETCOMMANDPROMPT FROM Boards)performing a select * from this view in sqlserver works and show the short column names
this is the error i'm getting for performing a select * from v_boards@sqlserver_dblink
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][SQL Native Client][SQL Server]Invalid column name 'BoardManagementTelnetLoginProm'. {42S22,NativeErr = 207}[Microsoft]
[SQL Native Client][SQL Server]Invalid column name 'BoardManagementTelnetPasswordP'. {42S22,NativeErr = 207}[Microsoft][SQL Native
Client][SQL Server]Invalid column name 'BoardManagementTelnetCommandPr'. {42S22,NativeErr = 207}[Microsoft][SQL Native Client][SQL
Server]Statement(s) could not be prepared. {42000,NativeErr = 8180}
ORA-02063: preceding 2 lines from sqlserver_dblinkI also tried replacing the * with specific column names but it fails on the columns that have a long name (it doesn't recognize the short names from the view)
what am I doing wrong?
Edited by: Pyrocks on Dec 22, 2010 3:58 PM

How can i load data from access database to datagridview with custom columns all days of a month ?

Hi guys
I am newbie in vb net and I want your help to solve a problem.
I have this datagridview with two columns and all days of a month in custom columns.
[IMG]http://i59.tinypic.com/2qwpj15.png[/IMG]
I also have one combobox to change Year and a combobox to change Month.
Here is the code to load data
Private Sub fill_plan()
dgMonth.Rows.Clear()
Try
Dim i As Integer = 0
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
myDR = cmd.ExecuteReader
If myDR.HasRows Then
While myDR.Read
dgMonth.Rows.Add()
dgMonth.Rows(i).Cells(0).Value = myDR.GetInt32(myDR.GetOrdinal("MonID"))
dgMonth.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Unitname"))
dgMonth.Rows(i).Cells(2).Value = myDR.GetInt32(myDR.GetOrdinal("Personel"))
i = i + 1
End While
End If
myDR.Close() : con.Close()
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
With
this code the
personel column
loads the first
day of the month.
I want to load
the column the date that is
in the database.

Hello,
This can be done with less code
Private Sub fill_plan()
dgMonth.DataSource = Nothing
Dim dt As New DataTable
Try
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
dt.Load(cmd.ExecuteReader)
dgMonth.DataSource = dt
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
The above loads all rows, if you want to limit the rows placed in the DataGridView this is best done in the SQL via WHERE conditions and/or with SELECT TOP x.
Formatting of the data is best done via the property window for the DataGridView on whatever column you want too. Using the above you now need to set the data property for each column and set dgMonth.AutoGenerateColumns = False, in the end we end up with
less code
edit is there a reason for returning the primary key? If so then using my method we can hide that field but I see no reason for having it in this case
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Please help!!! This expression must have a constant value

I try to work with cfc and cfinvoke and not sure why I got this error. Searched
in google for answer but still don't get any. Can anyone help please...not sure where
I had it wrong...I thought my codes should work (?)
When a form is submitted I have this codes in formaction.cfm, I captured all the form fields in a structure:
<CFSET st_Registration = {Salutation="#Trim(Form.Salutation)#", FName = "#Trim(Form.FName)#", MName = "#Trim(Form.Mname)#",LName = "#Trim(Form.LName)#" .......etc }/>
Then I set all the required fields:
<CFSET ReqFields ="Salutation,FName,LName,Addr1,City,State,Zip,Country,Phone,Email,username,password">
<cfset CreateUserInfo = createObject("component", "airbucks.cfcomp.VerifyInput").init()>
<CFINVOKE component="#CreateUserInfo#" method="Verify_ReqFields" st_Registration = "#st_Registration#" RequiredFields ="#ReqFields#" returnvariable="VerifyResult">
<CFIF #VerifyResult# IS "">
<cfdump var="#st_Registration#">
<CFELSE>
<CFIF #st_Registration["Country"]# IS "USA">
<CFINCLUDE template="registration_ret.cfm">
<CFELSE>
<CFINCLUDE template="registration_other_ret.cfm">
</CFIF>
</CFIF>

<cfcomponent displayname="VerifyInputData" output="false"> <CFFUNCTION name="Init" access="public" returntype="any" output="false" hint="Returns an initialized component instance.">

<cfreturn THIS />
</CFFUNCTION>

<CFFUNCTION name="Verify_ReqFields">
<cfargument name="st_Registration" type="struct" required="true">
<cfargument name="RequiredFields" type="string" required="true">

<CFSET ErrorList = "">
<cfloop collection="#arguments.st_Registration#" item="KEY">
<CFIF #Trim(st_Registration[KEY])# IS "">
<CFSWITCH expression="#Trim(KEY)#">
<CFCASE value="#arguments.RequiredFields#">
<CFSET ErrorList = ListAppend(ErrorList, "#KEY#")>
</CFCASE>
</CFSWITCH>
</CFIF>
</cfloop>
<CFRETURN ErrorList >
</CFFUNCTION>
　 </cfcomponent>
    Here is the error:
The following information is meant for the website developer for debugging purposes.
Error Occurred While Processing Request
This expression must have a constant value.
The error occurred in C:\Inetpub\wwwroot\AirBucks\registrationaction.cfm: line 55
53 :
54 : 
55 : <cfset CreateUserInfo = createObject("component", "airbucks.cfcomp.VerifyInput").init()>
56 : <CFINVOKE component="#CreateUserInfo#" method="Verify_ReqFields" st_Registration = "#st_Registration#" RequiredFields ="#ReqFields#" returnvariable="VerifyResult">
57 :

Thank you and I'll change my codes.
When I did the following, I still get the same error.
Isn't it CreateUserInfo is the object?
<cfset CreateUserInfo = createObject("component", "airbucks.cfcomp.VerifyInput").init()>
<CFSET VerifyResult = CreateUserInfo.Verify_ReqFields(st_Registration, ReqFields)>
Using cfinvoke used to work.
The following information is meant for the website developer for debugging purposes.
Error Occurred While Processing Request
This expression must have a constant value.
The error occurred in C:\Inetpub\wwwroot\AirBucks\registrationaction.cfm: line 54
52 : 
53 :
54 : <cfset CreateUserInfo = createObject("component", "airbucks.cfcomp.VerifyInput").init()>
55 : <!---
56 : <CFINVOKE component="#CreateUserInfo#" method="Verify_ReqFields" st_Registration

Database not found/Error: ORA-16621: database name for ADD DATABASE must be

I am new to Data Guard and am trying to set up Data Guard Broker. I had created a configuration file with both my primary and standby databases and at one time I could show both databases. But now I can no longer show the standby database nor can I enable, disable or reinstate it. Here is what I have:
Primary Database: orcl10g
Standby Database: 10gSB
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose orcl10g
Database
Name: orcl10g
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
orcl10g
Properties:
InitialConnectIdentifier = 'orcl10g'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '10gSB, orcl10g'
LogFileNameConvert = '/oracle/oracle/product/10.2.0/oradata/orcl10g/redo01.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo01.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo02.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo02.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo03.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo03.log'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'remarkable.mammothnetworks.com'
SidName = 'orcl10g'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521))'
StandbyArchiveLocation = '/oracle/flash_recovery_area/orcl10g/archivelog'
AlternateLocation = ''
LogArchiveTrace = '1024'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> remove database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> reinstate database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> enable database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> add database '10gSB' as
connect identifier is 10gSB
maintained as physical;Error: ORA-16621: database name for ADD DATABASE must be unique
Failed.
How can I get Data Guard to see the standby database correctly again?

Thank you for the constructive feedback. I have been able to make progress on this issue.
I did check the Data Guard Log files as you suggested. I did not find anything when I checked them before but this time I found the following:
DG 2011-06-16-17:23:18 0 2 0 RSM detected log transport problem: log transport for database '10gSB' has the following error.
DG 2011-06-16-17:23:18 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "10gSB" has an error
DG 2011-06-16-17:23:18 0 2 0 NSV1: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 0 RSM0: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
I verified that I am able to connect to both the primary and standby databases via external connections:
-bash-3.2$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 17-JUN-2011 12:41:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 17-JUN-2011 01:40:30
Uptime 0 days 11 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521)))
Services Summary...
Service "10gSB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_DGB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_XPT" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl10g" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10gXDB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_DGB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_XPT" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
The command completed successfully
-bash-3.2$
-bash-3.2$
-bash-3.2$ sqlplus system/dbas4ever@orcl10g
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ sqlplus system/dbas4ver@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress <== I think this is normal since the database is in mount mode
Enter user-name:
I also checked the listener log file and did see and error associated with a known bug:
WARNING: Subscription for node down event still pending
So I added the following to the listener.ora file and bounced the listener:
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
That seems to have taken care of the error.
The following is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC = ( GLOBAL_DBNAME = 10gsb_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = 10gsb.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
I again tried connecting externally to the standby database:
-bash-3.2$ sqlplus system/dbas4ever@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 13:09:00 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
and see this in the listener.log file:
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11357)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11358)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:24 * service_update * 10gSB * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25119)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25120)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=emagent)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25121)) * establish * orcl10g * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11420)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11422)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:24 * service_update * 10gSB * 0
I tried again to see the database in Data Guard Broker:
DGMGRL> show database 10gSB
Object "10gsb" was not found
however, I then was able to add the database in Data Guard Broker:
DGMGRL> add database 10gSB
as connect identifier is 10gSB
maintained as physical;Database "10gsb" added <== this is progress!!!
However the configuration shows the following:
DGMGRL> show database 10gSB
Database
Name: 10gsb
Role: PHYSICAL STANDBY
Enabled: NO
Intended State: OFFLINE
Instance(s):
10gSB
Current status for "10gsb":
DISABLED <=====
So I tried to enable the database:
DGMGRL> enable database 10gSB
Error: ORA-16626: failed to enable specified object
Failed.
and I tried to reinstate the database:
DGMGRL> reinstate database 10gSB
Reinstating database "10gsb", please wait...
Error: ORA-16653: failed to reinstate database
Failed.
Reinstatement of database "10gsb" failed
So I checked the configuration and now see two entries for the standby database but with case differences:
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
10gsb - Physical standby database (disabled)
Current status for "orcl10g":
SUCCESS
Question: How do I get rid of 10gSB and enable 10gsb?

TS3354 "To play this movie in HD, you must have a PC with a built-in display or have it connected to a display that supports HDCP."

I recently reinstalled restored my Toshiba laptop with Windows 8 to factory condition. I reinstalled iTunes, and now when I try to play a movie, I get this error message: "To play (name of movie) you must have a PC with built-in display or have it connected to a display that has built in HDCP." This happens with both my downloaded movies and my iCloud movies. It never did this before. Any suggestions?

I have the exact same problem. I watched both AnchorMan 2 and The Hobbit Desolation of Smaug a week ago on my set up. BenQ monitor ATI Radeon HD 5700 Series Video card. No issues. Then I reformat and all of a sudden my purchased movies give me that error. It's so frustrating.
The odd part is for the Hobbit the itunes extras will start just like before, however I can't select a scene.
How is there no response to this? Are we missing something obivous? A default setting? Driver?
Help please!

SQL Server 2008 R2 Express with SP2: 'SQLEXPRESS'-instance installation fails while any other instance name installation succeeds.

We supply our software package that also includes the unattended installation (with /QS and so on) of SQL Server R2 Express (with SP2).
The setup works good in about 99.9% cases, but one customer complained that after the "successful SQL Sever installation (at least, it looked so!) he could not open the supplied database getting some strange error messages...
After some months of trial-n-error attempts we are now able to reproduce the problems this custumer had. But we cannot find the reason of the problem.
So the test computer is a virtual machine with Windows 7 + sp1 32-bit.
Among the programs/tools installed on this machine there were (in the following order):
SQL Server 2008 Express - the default SQLEXPRESS instance
SSMS
VS 2010 Pro (German)
SQL Server 2008 Express R2 (with SP 1 or SP2 - ?) - the default SQLEXPRESS instance
Then some of them were uninstalled in the following order:
SQL Server 2008 Express
SSMS
SQL Server 2008 Express R2
Now we tried to install (in normal mode with UI) the SQL Server 2008 Express R2 with SP2.
When we chose the default SQLEXPRESS instance - it failed with the following info:
Configuration status: Failed: see details below
Configuration error code: 0x7FCCE689
Configuration error description: External component has thrown an exception.
and the Detail.txt file contained the following:
2015-01-20 10:44:09 Slp: External component has thrown an exception.
2015-01-20 10:44:09 Slp: The configuration failure category of current exception is ConfigurationValidationFailure
2015-01-20 10:44:09 Slp: Configuration action failed for feature SQL_Engine_Core_Inst during timing Validation and scenario Validation.
2015-01-20 10:44:09 Slp: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
2015-01-20 10:44:09 Slp: at SSisDefaultInstance(UInt16* , Int32* )
2015-01-20 10:44:09 Slp: at Microsoft.SqlServer.Configuration.SniServer.NLRegSWrapper.NLregSNativeMethod Wrapper.SSIsDefaultInstanceName(String sInstanceName, Boolean& pfIsDefaultInstance)
2015-01-20 10:44:09 Slp: Exception: System.Runtime.InteropServices.SEHException.
2015-01-20 10:44:09 Slp: Source: Microsoft.SqlServer.Configuration.SniServerConfigExt.
2015-01-20 10:44:09 Slp: Message: External component has thrown an exception..
2015-01-20 10:44:09 Slp: Watson Bucket 1 Original Parameter Values
2015-01-20 10:44:09 Slp: Parameter 0 : SQL Server 2008 R2@RTM@
2015-01-20 10:44:09 Slp: Parameter 1 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 2 : SSisDefaultInstance
2015-01-20 10:44:09 Slp: Parameter 3 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 4 : System.Runtime.InteropServices.SEHException@-2147467259
2015-01-20 10:44:09 Slp: Parameter 5 : SniServerConfigAction_Install_atValidation
2015-01-20 10:44:09 Slp: Parameter 6 : INSTALL@VALIDATION@SQL_ENGINE_CORE_INST
When we chose some other instance name then the installation has completed successfully.
So the questions are:
What could be the reason of the problem (and only for SQLEXPRESS instance that was earlier installed and then uninstalled)? I will provide the complete Detail.txt file if needed.
How could we check (if we could) the conditions so some name would be allowed as an instance name for SQL Server installer to success?
With the best regards,
Victor
Victor Nijegorodov

Thank you Lydia!
Unfortunately the simple check the registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL does /did not work in our case since there is no any instance
name there,
However there seem to be some "rudiments" under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and/or HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
So I will now try to check the subkeys of these two keys as it was mentioned by Xiao-Min Tan.
Best regards,
Victor Nijegorodov
Victor Nijegorodov

My iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.

my iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.
What's the answer?
Thanks

Many thanks to responded to my question and sorry not to get back sooner.
Yes, I discovered by this unfortunate experience that the names of photos are a serious issue if the site is to ever go to an FTP server. Apple should discuss this carefully in their "manual".
One more question: I uploaded the website to a folder on my desktop. When I open it, unlike the photos in iWeb, there are folders for each page which have all the photos in them. I went through each folder and changed the names to be FTP compatible. I'm using iWeb SEO Tool which allows one to upload from this local folder to an FTP server but having trouble.
Is this because there is an imbedment in iWeb that uses the old photo names to link to the actual photos and it can't find them because of the name changes?
Thanks again for your help ...
Phil McP

Message: To play this movie in HD, you must have a computer with a built-in display ...

I rarely use iTunes, prefer, for obvious reasons to own physical media (which is prompting this question). But I do have an iPad 4 so I have to use it.
I bought a movie on iTunes and have downloaded it to a new brand new Windows 8 laptop. I am getting a message "To play this movie in HD, you must have a computer with a built-in display or have it connected to a display that supports HDCP."
My laptop is running a display at 1366 x 768 resolution and it is hooked up to a separate monitor using the HDMI out to the DVI input. Why am I getting this message and what is the workaround? I don't think that it's right that I have to re-buy the movie in standard definition to to watch it.
Also, as I have a 16 GB iPad, I typically don't have space available to store a 4GB movie but if I download the movie to my laptop and connect my iPad to my laptop, if I free up space will I be able to watch the movie on my iPad 4?
You can probably tell I'm not a fan of iTunes. Why does Apple insist on making everything so difficult? The iPad 4 with Retnia Display is the only Apple product I own and previously I have played this movie on my iPad.

I rarely use iTunes, prefer, for obvious reasons to own physical media (which is prompting this question). But I do have an iPad 4 so I have to use it.
I bought a movie on iTunes and have downloaded it to a new brand new Windows 8 laptop. I am getting a message "To play this movie in HD, you must have a computer with a built-in display or have it connected to a display that supports HDCP."
My laptop is running a display at 1366 x 768 resolution and it is hooked up to a separate monitor using the HDMI out to the DVI input. Why am I getting this message and what is the workaround? I don't think that it's right that I have to re-buy the movie in standard definition to to watch it.
Also, as I have a 16 GB iPad, I typically don't have space available to store a 4GB movie but if I download the movie to my laptop and connect my iPad to my laptop, if I free up space will I be able to watch the movie on my iPad 4?
You can probably tell I'm not a fan of iTunes. Why does Apple insist on making everything so difficult? The iPad 4 with Retnia Display is the only Apple product I own and previously I have played this movie on my iPad.

I have a 2nd generation Ipod. I have it connected to my computer and see (my name) ipod on my screen. Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do: The Ipod, (my name) is synced with another ITunes li

I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.

If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY!

What does this message mean? "ITunes has fetected an iPad in recovery mode. You must restore this iPad before it can be used with ITunes".

What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?

Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards.

ORA-00998: must name this expression with a column alias

Similar Messages

Maybe you are looking for