ORA-01460 at REPLACE for strings longer than 4000 characters

the following code works fine for vVar_Value less than 4001 characters but raises an ORA-01460 for strings equal to or larger than 4001 characters in my environments.
declare
vVar_Value VARCHAR2(32000) := '';
begin
for i in 1..4000 loop
vVar_Value := vVar_Value||'X';
end loop;
dbms_output.Put_Line('length(vVar_Value): '||length(vVar_Value));
SELECT REPLACE( vVar_Value, 'NO_MIDDLE_NAME', '') INTO vVar_Value FROM DUAL;
exception
when others then
raise;
end;
any advice would be most apprectiated.
thanks in advance.

Why the heck are you using select from dual?
Just use vVar_Value := REPLACE( vVar_Value, 'NO_MIDDLE_NAME', ''); and everything will be OK
in SQL limit for varchar2 is 4K, only in PL/SQL you can use 32K
Gints Plivna
http://www.gplivna.eu

Similar Messages

Trying To Insert XML String Greater Than 4000 Characters in PHP Fails

Dear Sir,
Subject:-Trying To Insert XML String Greater Than 4000 Characters in PHP Fails ORA-01704.
In an attempt to design web app in PHP and inserting data into "CLOB" field of "articles" table associated with it, returning ORA-01704: string literal too long error.
Platform: OEL5
Database 11g(11.0.7.0)
php : 5.2
I refer to oracle document ID: [ID 336888.1] it is asking to contact support.
Please help us in this regards.
Many Thanks,
mkyazdani

Hi,
I appreciate you, yes it is similar i have referred that manual and also inform to our php developer about the changes we need to make in our php script.
Regards,
mkyazdani

Parameter longer than 4000 characters

The java layer calls a EXEC_DDL stored proc that does a EXECUTE IMMEDIATE on the VARCHAR2 parameter string passed in. SInce the java layer is passing more than 4000 characters DDL statement we get an error about cannot bind long ..... What datatype should I use as a parameter instead of VARCHAR2 inside the EXEC_DDL stored proc. Steven Feuerstein advises against using LONG in his PL/SQL book. All the LOB types are for objects either INSIDE or OUTSIDE of the database but I just want the java code to be able to pass a DDL string greater than 4000 chars. I want to use the simplest approach.
Thanks in anticipation

a SUBSTR or a DBMS_LOB.SUBSTR works. This is the final working version of the EXEC_DDL proc. We used the DBMS_LOB package in case we needed to overload with other types of LOB parameters.
procedure exec_ddl (
pi_ddl_string IN CLOB
,po_status OUT PLS_INTEGER
AS
PRAGMA AUTONOMOUS_TRANSACTION;
-- AUTHID CURRENT_USER will be added after exception handling is packaged
v_clob_buff VARCHAR2(500);
BEGIN -- outer block
EXECUTE IMMEDIATE pi_ddl_string;
po_status := PKG_SNAPIT.pk_success;
EXCEPTION
WHEN OTHERS THEN
v_clob_buff := DBMS_LOB.SUBSTR(pi_ddl_string,500,1);
insert into exception_log values(sysdate,'COMPILE ERROR IN : ' || v_clob_buff,'pkg_dynamic_sql'
,'exec_ddl');
COMMIT;
pkg_snapit.Log_Errors ( 'Error_Stack...' || Chr(10) || DBMS_UTILITY.FORMAT_ERROR_STACK() );
pkg_snapit.Log_Errors ( 'Error_Backtrace...' || Chr(10) || DBMS_UTILITY.FORMAT_ERROR_BACKTRACE() );
po_status := SQLCODE;
RAISE;
END exec_ddl;
Edited by: user4900730 on Mar 11, 2010 2:00 PM

Strings longer than 127 characters

Hello,
is it now possible to add a String from a POJO with more than 127 characters?
Thanks
Christian

When you design a Crystal Reports report in Crystal Reports for Eclipse, where you drop in a POJO class for a datasource, you'll see that all String columns are given the default length of 127.
When you inject a Collection of POJO class instances into the report using the setDataSource(java.util.Collection, ...), you'll see that any String with length greater than 127 is truncated.
How do you avoid this?
In the JRC for XI R2 - you could re-compile the pojoSample.jar file after modifying the default value, or you could specify a longer length using the POJOResultSetFactory.setMemberColumnDisplaySize(...) method.
The POJOResultSetFactory method for Crystal Report for Eclipse has been renamed and incorporated into rasapp.jar. The source code for the POJO factory classes are no longer provided - thus, the XI Release 2 solutions do not work.
So what you will need to do for CR for Eclipse, is you must manually create the ResultSet by invoking the com.crystaldecisions.sdk.occa.report.application.internal.POJOResultSetHelper class directly - POJOResultSetHelper is for CR4E what POJOResultSetFactory was for XI Release 2.
Here's a code snippet:
    // SimplePojo.class is my POJO class, getName is a String property for the class,
    // and arrayList is the Collection of POJO class instances.
    POJOResultSetHelper pojoHelper = new POJOResultSetHelper(SimplePojo.class);
    pojoHelper.setMemberColumnDisplaySize("getName", 256);
    java.sql.ResultSet rs = pojoHelper.createResultSet(arrayList);
    reportClientDocument.getDatabaseController().setDataSource(rs, "SimplePojo", "SimplePojo");
a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite

File seek in wlst fails for lines longer than 8091 characters

For a CSV file generated in WLST i want to update the header, the first line of the output file, when new metrics have been detected. This works fine by using seek to go to the first line and overwriting the line. But it fails when the number of characters of the first line exceeds 8091 characters.
I made simplified script which does reproduce the issue i am facing here.
    #!/usr/bin/python
    import sys
    global maxheaderlength
    global initheader
    maxheaderlength=8092
    logFilename = "test.csv"
    # Create (overwrite existing) file
    logfileAppender = open(logFilename,"w",0)
    logfileAppender.write("." * maxheaderlength)
    logfileAppender.write("\n")
    logfileAppender.close()
    # Append some lines
    logfileAppender = open(logFilename,"a",0)
    logfileAppender.write("2nd line\n")
    logfileAppender.write("3rd line\n")
    logfileAppender.write("4th line\n")
    logfileAppender.write("5th line\n")
    logfileAppender.close()
    # Seek back to beginning of file and add data
    logfileAppender = open(logFilename,"r+",0)
    logfileAppender.seek(0) ;
    header = "New Header Line" + "." * maxheaderlength
    header = header[:maxheaderlength]
    logfileAppender.write(header)
    logfileAppender.close()
When maxheaderlength is 8091 or lower i do get the results as expected. The file test.csv starts with “New Header Line" followed by 8076 dots and followed by the lines 2nd line 3rd line 4th line 5th line
When maxheaderlength is 8092> the test.csv results as a file starting with 8092 dots followed by "New Header Line" and then followed by 8077 dots. The 2nd ... 5th line are now show, probably overwritten by the dots.
Any idea how to work around or fix this ?

For the benefit of others, i got a workaround from Jeremy Gosling on a crosspost on stackoverflow.
I too was able to reproduce this extremely odd behaviour and indeed it works correctly in Jython 2.5.3 so I think we can safely say this is a bug in 2.2.1 (which unfortunately you're stuck with for WLST).
My usual recourse in these circumstances is to fall back to using native Java methods. Changing the last block of code as follows seems to work as expected :-
# Seek back to beginning of file and add data
from java.io import RandomAccessFile
logfileAppender = RandomAccessFile(logFilename, "rw")
logfileAppender.seek(0) ;
header = "New Header Line" + "." * maxheaderlength
header = header[:maxheaderlength]
logfileAppender.writeBytes(header)
logfileAppender.close()

How to Handle the Strings more than 4000 characters in OBIEE 11g

Hi Folks,
I have a derived column in RPD where there are like bunch of case statements which involve the columns from 2 or more dimensions. Now I am getting an error ORA-01489: result of string concatenation is too long at OCI call OCIStmtFetch.
How can we handle this in OBIEE? I have tried the below option that is provided in the below link but I think this work only if it is a single column but in my case it is derived column.
Please suggest.
Thanks,
Bharath

Bharath,
Can you try using CLOB function.Check the below URL.Not sure if it helps you.
sql - LISTAGG function: &quot;result of string concatenation is too long&quot; - Stack Overflow
Thanks,
Sasi Nagireddy.

Owa_text.vc_arr: can't handle the string with more than 4000 characters?

In the Oracel Web Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer.
I amusing PL_SQL with Oracle8i and OWA4.0 web server.I want to
use owa_text.vc_arr to pass the multple line texts in my form.
If the text length is less than 4000 characters, everything works
fine.However when the texts are longer than 4000 characters but
less than the max length 32767 characters, I got this error
message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define
datatype.
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

Helena, I think you might get a better response either from the SQL-PL/SQL forum, or perhaps the Portal Applications forum - both of these tend to have folks very familiar with PL/SQL and the OWA packages.
This forum is on Web services based on SOAP, WSDL and UDDI. These can be PL/SQL based but typically don't use the mod_psql or OWA web solution.
As a pointer, I suspect you may already be familiar with, but just in case, you can always take a look at chapter 3 of the OAS documentation, "Developer's Guide: PL/SQL and ODBC Applications" where they go through a number of examples using parameters. See:
http://technet.oracle.com/doc/appsrvr4082/guides/plsql.pdf
Hope this or folks from the other list can help.
Mike.

Why can't owa_text.vc_arr handle the string with more than 4000 characters?

I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way)

Insert more than 4000 characters using sql plus

I have a SQL script that creates a database. The problem is that some of the fields are longer than 4000 characters in the INSERT statement and Oracle doesn't seem to like it.
The field is a clob and works fine in the application (i.e. I can insert more than 4000 characters using the app) - how do I achieve this in a SQL script?
Any help is much appreciated.
Cheers,
Steve

Hi,
This pl/sql block works absolutely fine in SQL*Plus inserting > 4000 characters into clob column:
declare
l_str varchar2(8000);
l_str1 varchar2(2400) := 'first part of the verly long string...';
l_str2 varchar2(2400) := 'second part of the verly long string...';
begin
l_str := l_str1 || l_str2;
insert into tmpl values (l_str);
end;
So, you'll have to replace inserts with pl/sql blocks in your script.
Tested in Oracle 8.1.7.0.0
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com

How to pass a string longer than 30 to an Export Parameter in a PI sheet ?

Hi All,
I'm trying to set up a process instruction in a PI sheet that calls a URL web page.
I found the function module CALL_BROWSER and tested it in SE37 and it works fine.
I created a process instruction to call this function module and pass parameters to it.
Everything works if the URL is short. For example:
0010   PPPI_BUTTON_TEXT          Show URL
0020   PPPI_FUNCTION_NAME          CALL_BROWSER
0030   PPPI_FUNCTION_DURING_DISPLAY     allowed
0040   PPPI_EXPORT_PARAMETER          URL
0075   PPPI_STRING_CONSTANT          http://www.google.com
This is where I ran into a roadblock.
The characteristic PPPI_STRING_CONSTANT is only 30 characters long.
I can't figure out how to pass an export parameter longer than 30 characters.
I have also tried loading up multiple PPPI_VARIABLE(s) with the idea of some how combining them into a single long string that I can pass, but no luck figuring out how.
Any help would be greatly appreciated
Kind Regards
Michael

Thanks Dario, this is good information, but it does not directly solve my problem.
I think I have figured out an approach, but was hopeing someone else had a standard solution.
If I don't here something soon, I will try the following:
Create a new function moduel as a shell or wrapper that calls the standard FM RUN_Browser.
My shell will have 5 input parameters URLP1 thru URLP5.
I can then pass a long URL to my shell in 5 parts.
Inside my shell, the 5 parts will be joined up into 1 long string and passed on to the URL parameter in RUN_Browser.
If anyone has a better idea, please let me know.
Kind Regards
Mike Rupp

ORA-13223: duplicate entry for string in SDO_GEOM_METADATA table and

I got the above error while trying to insert a record into the table SDO_GEOM_METADATA. However, when querying this table I did find any duplicate table_name, column_name pair that match with the error.
Here are the steps that I worked on:
1. Add a geometry column into an existing table.
ALTER TABLE GEO_MAP ADD (ORG_GEOM mdsys.sdo_geometry);
2. Register the new column into mdsys
insert into USER_SDO_GEOM_METADATA
values ('GEO_MAP','ORG_GEOM',
mdsys.sdo_dim_array(
mdsys.sdo_dim_element('LONG',-180,180,0.00005),
mdsys.sdo_dim_element('LAT',-90,90,0.00005)
8307)
I got the error ORA-13223: duplicate entry for string in SDO_GEOM_METADATA table even there was no such record in there.
3. I inserted values in the column ORG_GEOM fine.
4. However, when I tried to create the index for this column I got the error:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA view
ORA-13203: failed to read
Please help.
Thanks.

SQL> select * from mdsys.sdo_geom_metadata_table;
SDO_OWNER SDO_TABLE_NAME
SDO_COLUMN_NAME
SDO_DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SDO_SRID
QW_USER1 GEO_REF
LOC_GEOM
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('LONG', -180, 180, .00005), SDO_DIM_ELEMENT('LAT',
-90, 90, .00005))
SDO_OWNER SDO_TABLE_NAME
SDO_COLUMN_NAME
SDO_DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SDO_SRID
8307
MDSYS SDO_CMT_CBK_RTREE_TAB
GEOM
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180, .000000005), SDO_DIM_ELEMENT('Y',
SDO_OWNER SDO_TABLE_NAME
SDO_COLUMN_NAME
SDO_DIMINFO(SDO_DIMNAME, SDO_LB, SDO_UB, SDO_TOLERANCE)
SDO_SRID
-90, 90, .000000005))
The situation is we have 2 tables (GEO_MAP, and GEO_REF) that have spatial columns. Everything worked fine until when one of the queries that searched through the table GEO_MAP ran so slow, we decided to rebuild the related spatial index by dropping and recreating it. However, after I dropped it I could not recreated. Keep getting the error:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA view
ORA-13203: failed to read
Any help is very much appreciated.

YOUTUBE says my account IS ABSOLUTELY eligible for uploads longer than 15 minutes but FCPX says i am NOT eligible...

HELP! YOUTUBE says my account is eligible for uploads longer than 15 minutes, however, I am trying to upload a file from Final Cut Pro X using the SHARE BUTTON and FCPX says my account is NOT ELIGIBLE for vides over 15 minutes. How can I make sure that Final Cut is updated with this proper info from youtube? PLEASE HELP!!! I HAVE TO GET A VIDEO UP ASAP!

David and Keith have got this right. Don't depend on FCP to do the account verification and upload. Export your movie and use Compressor, or MPEG STreamclip, or QT Pro to spit out an h.264. Manually upload. Be generous in setting video quality. YT, Vimeo et al will recompress and the more information your file contains (within reason) the better. Just make sure any interlaced material is de-interlaced (a vote for Compressor) and the process will be smoother if you give them 29.97 frame rates,
Russ

Cannot insert more than 4000 characters using PL/SQL SP to LONG columns

I have created a stored procedure which will insert more than 4000 characters in a table having long column.
The stored procedure body is as follows :
CREATE OR REPLACE PROCEDURE INSERTTOTEST(P_ZUNIQUEID IN VARCHAR2,P_LONGVAL IN LONG)
AS
BEGIN
insert into CLOBVALUESHOW(zuniqueid, longval) VALUES (p_zuniqueid, p_longval) ;
COMMIT;
END INSERTTOTEST;
When I use the RPAD function as below, it executes without any error :
EXEC INSERTTOTEST('ABCD123',rpad('',32000,'*'))*
But when I run with real-time values like the following string value :
'[ERROR] [JTA_Command_Insert_tCatalog]Error invoking Transaction Command action: JTATransactionCommand - A SQL Command Exception occured against JNJ_MDD_OCD_CPL_DS with the following command BEGIN INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1988211','09','ALB','33','NA','0','','','','ALB','8','522','305','710','50','17','208','165','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1988211','09','ALB','33','NA','0','','','','ALB','8','522','305','710','50','17','208','165','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('8257289','67','GGT','15','NA','0','','','','GGT','8','543','305','710','50','21','323','250','','','SP','1','0','','0','0','0','0','0','2','0','0','0','2','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1513209','12','PHOS','33','11','12','','','','PHOS','8','507','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1513209','12','PHOS','33','11','12','','','','PHOS','8','507','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1513209','12','PHOS','33','11','12','','','','PHOS','8','507','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1450261','03','CA','33','NA','0','','','','Ca','8','506','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1450261','03','CA','33','NA','0','','','','Ca','8','506','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1450261','03','CA','33','NA','0','','','','Ca','8','506','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1513209','12','PHOS','33','11','12','','','','PHOS','8','507','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0'); INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, tCatalog_SAPImport.StoreTemp, tCatalog_SAPImport.CartonCode, tCatalog_SAPImport.GrossLeakLimit, tCatalog_SAPImport.LeakLimit, tCatalog_SAPImport.CompValue, tCatalog_SAPImport.ProductType,tCatalog_SAPImport.CheckWeighHi, tCatalog_SAPImport.CheckWeighLo, tCatalog_SAPImport.SO_MASK, tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1450261','03','CA','33','NA','0','','','','Ca','8','506','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0');'*
I get the error -
Error starting at line 1 in command:
exec P_TESTCLOB(6, '[ERROR] [JTA_Command_Insert_tCatalog]Error invoking Transaction Command action: JTATransactionCommand - A SQL Command Exception occured against JNJ_MDD_OCD_CPL_DS with the following command BEGIN INSERT INTO tCatalog_SAPImport( tCatalog_SAPImport.CatalogNo, tCatalog_SAPImport.SONumber, tCatalog_SAPImport.ChemName, tCatalog_SAPImport.RH, tCatalog_SAPImport.ExpireMonth, tCatalog_SAPImport.SlidesPerCart, tCatalog_SAPImport.IDEXX_PART_NBR, tCatalog_SAPImport.TOP_FOIL_MATL_NBR, tCatalog_SAPImport.BTM_FOIL_MATL_NBR, tCatalog_SAPImport.AltChemName, ………..tCatalog_SAPImport.CAL_CURVE_PFX, tCatalog_SAPImport.PROD_INP_TYP, tCatalog_SAPImport.CTN_TUBE, tCatalog_SAPImport.SLIDE_STYLE, tCatalog_SAPImport.PROD_DESIG, tCatalog_SAPImport.SFM_AUD_RT, tCatalog_SAPImport.SPL_RT, tCatalog_SAPImport.FIRST_SLIDES_REM, tCatalog_SAPImport.SPL_FRONT, tCatalog_SAPImport.SPL_REAR, tCatalog_SAPImport.BARCODE_TYP, tCatalog_SAPImport.CHK_WEIGH_AIM, tCatalog_SAPImport.FOIL_TYP, tCatalog_SAPImport.CART_CLIP_PRES, tCatalog_SAPImport.TOP_LBL_TYP, tCatalog_SAPImport.FREEZER_MTH, tCatalog_SAPImport.OVERAGE_MTH) VALUES('1450261','03','CA','33','NA','0','','','','Ca','8','506','305','710','50','11','323','262','','','SP','1','0','','0','0','0','0','0','2','0','0','0','1','0','0');' *(the statement continues, I have trimmed it as it is not possible that amount of length in the forum. )*
Error report:
ORA-06550: line 1, column 1398:
PLS-00103: Encountered the symbol "1988211" when expecting one of the following:
) , * & = - + < / > at in is mod remainder not rem =>
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
Can anyone tell me why I am getting this error executing the same STORED PROCEDURE while inserting into the LONG column but when using RPAD functions for executing the same STORED PROCEDURE its not happening ?

>
But then why will the problem happen with this long string ?
>
You don't have a 'long string'. You have a lot of single-quoted strings combined with some unquoted strings.
There are embedded singel quotes in what you call 'this long string'.
Try using a different string delimiter so that the quotes do not cause a problem.
You can use an exclamation point ('!') since there is none in the text you provided.
Here is an example of what will not work because there is one embedded single quote
'name LIKE '%DBMS_%%'This is the same value using exclamation as the delimiter - this works because there is no exclamation in the string
q'!name LIKE '%DBMS_%%'!'1. q must be the first character
2. ' (single quote) must be the next character
3. ! (or any delimiter you choose) is the next character
4. abcdefg. . . -- this is your string that can include single quotes but not an exclamation point
5. ! is the next to last character - must be the same delimiter used as the third character
6. ' (single quote) is the last character
See the 'Text Literals' section of the SQL Reference for more examples
http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements003.htm
Note that this one will not work because the string includes the percent
This is the same value using exclamation as the delimiter - this works because there is no exclamation in the string
q'%name LIKE '%DBMS_%%'%'

How can I to send an email with a longer than 50 characters subject?

I'm trying to send an email through an abap program ( report ), but when the email arrives to the SOST transaction the subject is cut to 50 characters. How can I send an email with a longer than 50 characters subject?

check this below code and do changes in ur report
FORM SEND_MAIL_SUPPORT TABLES   P_EM_BODY
                        USING    P_TITLE.
*_ Start of the code to send an email notification
DATA : ATTACH_REC TYPE I.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
        OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE,
        OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
        OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
        DOC_CHNG LIKE SODOCCHGI1,
        TAB_LINES LIKE SY-TABIX.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'Mat Attach'(010).
DOC_CHNG-OBJ_DESCR = P_TITLE.
APPEND LINES OF P_EM_BODY TO OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
*Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE IT_ERROR LINES ATTACH_REC.
IF ATTACH_REC GE '1'.
*Start of email attachement of internal table conversition
   APPEND LINES OF IT_ERROR TO OBJBIN.
WRITE: '----
' TO OBJBIN.
APPEND OBJBIN.
CLEAR OBJBIN.
CONCATENATE 'CCode.' 'A/CDocNum.' ' FYear.' 'DType.' 'PDate.' ' RefField.' INTO
             V_TEXT SEPARATED BY ' '.
APPEND V_TEXT TO OBJBIN.
CLEAR V_TEXT.
WRITE: '----
' TO OBJBIN.
APPEND OBJBIN.
CLEAR OBJBIN.
LOOP AT IT_ERROR.
CONCATENATE IT_ERROR-BUKRS IT_ERROR-BELNR IT_ERROR-GJAHR IT_ERROR-BLART
             IT_ERROR-BUDAT IT_ERROR-STATUS INTO V_TEXT SEPARATED BY '   '.
APPEND V_TEXT TO OBJBIN.
CLEAR V_TEXT.
ENDLOOP.
WRITE: '----
' TO OBJBIN.
APPEND OBJBIN.
CLEAR OBJBIN.
    DESCRIBE TABLE OBJBIN LINES OBJPACK-BODY_NUM.
    OBJPACK-TRANSF_BIN = 'X'.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 1.
    OBJPACK-BODY_START = 1.
    OBJPACK-DOC_SIZE = OBJPACK-BODY_NUM * 255.
    OBJPACK-DOC_TYPE = 'RAW'.
    OBJPACK-OBJ_DESCR = 'List of Error Documents'(012). " Description
    APPEND OBJPACK. CLEAR OBJPACK.
ENDIF.
RECLIST-RECEIVER = S_EMAIL-LOW.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOC_CHNG
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = OBJPACK
      OBJECT_HEADER              = OBJHEAD
      CONTENTS_BIN               = OBJBIN
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      OPERATION_NO_AUTHORIZATION = 4
      OTHERS                     = 99.
*CHECK SY-SUBRC = 0.
ENDFORM.                    " SEND_MAIL_SUPPORT

"entry in field bank account number is longer than 10 characters"

Hello Sap Experts,
The user is getting an error on saving the bank infotype. (0009). The user is trying to create a IT0009 for an international assignee.The error is "entry in field bank account number is longer than 10 characters.
The default characters allowed maximum specified in the technical field is 18 characters. The abaper also checked and confirmed that it is specified as 18 characters.
This is only for a single employee.
Please provide your suggestions.
Thanks
Jyothsna

Jyothsna,
You need to extend Bank Account number length....even though 18 will be the max length..by default assignment of length will be different from country to country. So you need to extend the length of Bank a/c number in trasaction OY17.....select the country and change the bank a/c number length to 18 and Checking rule to 5 max value length.
Mohan

ORA-01460 at REPLACE for strings longer than 4000 characters

Similar Messages

Maybe you are looking for