ORA-02019: connection description for remote database not found
Hi all!
I've created Business Area (and EUL) through Oracle Warehouse Builder (looking at Oracle by Example tutorial Oracle By Example (OBE) - Oracle Warehouse Builder 10g Release 2 - Business Intelligence Modeling link: http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson7/bi-modeling.htm ). When using Oracle administration edition I can connect and open this business area. I can edit the dimensions and cubes folders in it.
Then I connect top Discoverer Plus with the same user and EUL. In creating new workbook wizard I can select all of my dimensions and measures, but when I click 'Finish' I get the above error. I looked at SQL and for every table in SQL a DB link to the same database where I work at is used. Can anyone tell me, why?
I have only one target module in OWB and that is the same database. Only source data comes from another databases and DB links must be used.
Maybe the DB links are not even the real problem and I did something else wrong. Any help would be appreciated.
Thanks,
BB.
If I paste the SQL into PL/SQL developer I get the same error, but when i remove DB links out of FROM section, the SELECT statement executes. I think (perhaps I'm completely wrong) the problem is that DB links are used even though this isn't the remote database, it is the database I'm working on.
FROM section looks like this:
FROM
OWNER.DIM_TABLE_1@"SERVICE_NAME_FROM_TNSNAMES@OWNER_LOCATION" o100025,
OWNER.DIM_TABLE_2@"SERVICE_NAME_FROM_TNSNAMES@OWNER_LOCATION" o100023...
If I try to make a DB link with such name, I get this error:
ORA-02082: a loopback database link must have a connection qualifier
Cause: attempt to create a database link with the same name as the current database.
Action: a loopback database link needs a trailing qualifier, e.g. MYDB.DEV.US.ORACLE.COM@INST1 - the '@INST1' is the qualifier
As I said, when I remove @"SERVICE_NAME_FROM_TNSNAMES@OWNER_LOCATION" parts from FROM section, SELECT executes without errors.
I hope I answered your question and you can give me some more instructions about this error.
Thank you for your replies,
bye!
Similar Messages
-
Datasource: ORA-02019: connection description for remote database not found
Hi,
I recently made the datasource to point to a new host, and using the EM console tested the connectivity to the datasource to be successful.
Java code that refers to the DS is also the same as before that was working as only the connection string has been changed, but now trying to access the web-application shows the following error in the logs:
==============
Exception::java.sql.SQLException: ORA-02019: connection description for remote database not found
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:431)
oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:463)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
oracle_jdbc_driver_T4CStatement_Proxy.executeQuery()=====================================
What could be the reason? Is there any other app server datasource related setting that needs to be done or is it some other issue - as I said 'testing the connection from EM console connects successfully'.
Thanks,
Rommel.The issue is resolved now.
One of the queries used a db link that was missing on the new database and therefore the error from the java code.
Since testing for connectivity using DS through EM console does not check for any db link (using the default query it executes) connectivity was successful.
Thank a lot,
Rommel. -
'Connection Description for Remote Database not found' Error
Hi All,
I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle.
I am getting an error when executing the interface which states 'Connection Description for Remote Database Not Found' at the 'Insert Flow into I$ table' step in the Operator logs.
The below is the content of the error:
2019 : 42000 : java.sql.SQLException: ORA-02019: connection description for remote database not found
java.sql.SQLException: ORA-02019: connection description for remote database not found
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.h.z(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Please advice me on the correction.
Many Thanks!Hi All,
I am seeing things are working fine, when I am using LKM SQL to Oracle in combination with IKM Oracle Incremental Update. It is only in the case of using LKM Oracle to Oracle(DBLINK) in combination with IKM Oracle Incremental Update, that the above mentioned error is thrown.
Please suggest on the resolution in using LKM Oracle to Oracle(DBLINK) with IKM Oracle Incremental Update...
Thanks! -
ORA-0209:Connection discription for remote database not found
Please help me with this oracle error.
I have create a DB link to connect to the Oracle database from a remote Oracle DB. I am able to query the select statement through DBLINK and i also created the Synonym for the same. But still iget the below error in the DB package when i am inserting one row into the same table for which i created a synonym with the DBLINK
ORA-0209:Connection discription for remote database not found
ORA-02063:preceding line from DBLINK
Please help me if anyone can give me a appropriate answer.
Thanks in advance for all those who try to help meSorry for the Typo mistake ..
The ORA error code is not ORA-0209 but it is ORA-02019 -
Who can help me to review the question? -"ORA-02019: connection description
Log error was found in Alert.log file in a DB in our production. It shows "ORA-02019: connection description for remote database not found". I check it and find the RECO process prompt this error message.
I did the following steps to check the issue:
1) connect system
2) SQL> select local_tran_id,global_tran_id,state,mixed,advice,retry_time,os_user,host,db_user from dba_2pc_pending;
LOCAL_TRAN_ID GLOBAL_TRAN_ID STATE MIX RETRY_TIM OS_USER HOST DB_USER
8.2.7545 ITOWN01M.US.ORACLE.COM.9ed5378 collecting no 27-SEP-04 oracle DB1 EPORT
a.8.2.7545
7.35.9404 ITOWN01M.US.ORACLE.COM.9ed5378 collecting no 27-SEP-04 administrator SZITOWN\SZITOWN-016 EPORT
a.7.35.9404
3.47.10637 ITOWN01M.US.ORACLE.COM.9ed5378 collecting no 27-SEP-04 administrator SZITOWN\SZITOWN-016 EPORT
a.3.47.10637
1.0.20850 ITOWN01M.US.ORACLE.COM.9ed5378 collecting no 27-SEP-04 administrator SZITOWN\SZITOWN-016 EPORT
a.1.0.20850
1.47.21806 ITOWN01M.US.ORACLE.COM.9ed5378 collecting no 27-SEP-04 Administrator WORKGROUP\SZITOWN-013 EPORT
a.1.47.21806
3) SQL> select local_tran_id,in_out,database,dbuser_owner,interface,dbid,sess#,branch from dba_2pc_neighbors;
LOCAL_TRAN_ID IN_ DATABASE DBUSER_OWN I DBID SESS# BRANCH
8.2.7545 in EPORT N 1 0000
7.35.9404 in EPORT N 1 0000
3.47.10637 in EPORT N 1 0000
1.0.20850 in EPORT N 1 0000
1.47.21806 in EPORT N 1 0000
8.2.7545 out CIQUSR_HG.US.ORACLE.COM EPORT N 234c63b2 1 4
7.35.9404 out CIQUSR_HG.US.ORACLE.COM EPORT N 234c63b2 1 4
3.47.10637 out CIQUSR_HG.US.ORACLE.COM EPORT N 234c63b2 1 4
1.0.20850 out CIQUSR_HG.US.ORACLE.COM EPORT N 234c63b2 1 4
1.47.21806 out CIQUSR_HG.US.ORACLE.COM EPORT N 234c63b2 1 4
4) I try to commit them by FORCE.
SQL> commit force '8.2.7545';
commit force '8.2.7545'
ERROR at line 1:
ORA-02058: no prepared transaction found with ID 8.2.7545
5) It seems no such entry, so I want to purge it.
SQL> exec dbms_transaction.purge_lost_db_entry('8.2.7545');
BEGIN dbms_transaction.purge_lost_db_entry('8.2.7545'); END;
ERROR at line 1:
ORA-30019: Illegal rollback Segment operation in Automatic Undo mode
ORA-06512: at "SYS.DBMS_TRANSACTION", line 65
ORA-06512: at "SYS.DBMS_TRANSACTION", line 85
ORA-06512: at line 1
What should I do at the point?? Although the issue do not get any bad effect to current Production, I really hope eveything would be OK.
Any help from you would be appreciated!!
RobinHello,
you have to fix the basic problem,ORA-02019 means your remote database cannot be reached because of an invalid connect string. So it's also impossible to do a COMMIT FORCE,same reason.
ORA-30019 is due to a bug, document 274321.1 in metalink describes what to do. Here's an extract:
If you get the following errors while purging transactions using "dbms_transaction.purge_lost_db_entry"
SQL> EXECUTE DBMS_TRANSACTION.PURGE_LOST_DB_ENTRY('5.23.2386');
BEGIN DBMS_TRANSACTION.PURGE_LOST_DB_ENTRY('5.23.2386'); END;
ERROR at line 1:
ORA-30019: Illegal rollback Segment operation in Automatic Undo mode
ORA-06512: at "SYS.DBMS_TRANSACTION", line 65
ORA-06512: at "SYS.DBMS_TRANSACTION", line 85
ORA-06512: at line 1
Fix:
===
This problem is logged as
Bug.2191458 (unpublished) UNABLE TO EXEC DBMS_TRANSACTION.PURGE_LOST_DB_ENTRY WITH AUTO UNDO MANAGEMENT and is worked by development.
Use the following workaround:
You have to use local_tran_id.....
Issue commit before alter system set "_smu_debug_mode" = 4;
Follow the steps,
SQL>commit;
SQL> alter session set "_smu_debug_mode" = 4;
SQL>execute DBMS_TRANSACTION.PURGE_LOST_DB_ENTRY('local_tran_id'); -
[FMWGEN][DB2 JDBC Driver]Remote Database Not Found:
while connecting to DB 2 i am getting this error can any help me what to do resolve this. thanks
If working with Database adapter then refer section "Deployment with Third Party Databases" and "JDBC Driver and Database Connection Configuration" at-
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#BGBBHJGC
Regards,
Anuj -
Mapping: ORA-04052 Remote Object not found
Hi,
I created a source module with a table reading from an external Oracle database. I can see data so the connection seems to work.
In the target module a mapping trying to read from this table can´t be deployed with this errors message:
- ora-06550: package body, line 0, column 0: ORA 04052: Error while trying to find the remote object: <name of the object> ....... ora-02019: connection description for remote-database not found.
An equal internal mapping, not adressing an external database, works find.
Any idea?
Thanks so much.
Georgoh, of course.
I could not find dblink, saw some source information. What section/s is /are to be checked?
I find code like
SELECT
/*+ NO_MERGE */
/* OBJSTAMM.INOUTGRP1 */
"OBJSTAMM"."OBJEKTNUMMER" "OBJEKTNUMMER"
FROM
"VMAN30M"."OBJSTAMM"@"PDORA06@QUELLE_VISMAN_LOCATION" "OBJSTAMM"
Is there a way to find out the correct "from" path?
Thanks Georg
Edited by: georgo on 02.05.2011 16:34 -
DUPLICATE DB : ORA-17629: Cannot connect to the remote database server
[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverWelcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112 -
Dw cs5 with existing wordpress site hosted on yahoo need help connecting to existing remote database
I am having trouble establishing a database connection. I can connect with test databases but am having trouble using dreamweaver wtih my existing wordpress website. Am I able to use dreamweaver to edit and live view my changes before uploading the changed files to my live site? Am I able to access my existing wordpress database with dreaweaver? I have imported it to my testing server/database but still seem to be having trouble establishing a connection with it (think maybe my folder hierarchy might be off).
macintosh HD/Applications/MAMP/htdocs/nwm/wp/index.php
"nwm" is the name of the folder that I have copied all of my site files to and the folder I have dreamweaver pointing to. "wp" is what I have all of the wordpress files in (the ones I copied from my yahoo server - including all my current theme files etc.)
I am trying to put the info into the mysql connection dialog box:
Connection Name: Testing (i am assuming this name is for my benefit only and doesn't actually matter)
MySQL Server: mysql
User Name: *****
Password: *****
Database: wp
and am getting this message
MySQL Error#: 2013
Lost connection to MySQL server at 'reading initial communication packet', system error 61
did some google seaches of the error. Tried turning off the firewall, and the advance tab allow mysql incoming (there were 2 one was allow one was not allow. I changed both to allow)
Cant really find anything on yahoo to help me out. Looked in phpmyadmin database named wp: wp_users to get the username and password (which due to previous look for help - I think the password was encrypted cuz it looked like a bunch of mumbo jumbo and am fairly certain I know the correct password).
Any help would be greatly appreciated!! I spent $50 on live chat last night trying to resolve the issue only to find out at the end that the guy really didn't understand my problem and doesn't have dreamweaver. I have also watched countless videos on Lynda.com and have been thru forum after forum. While this problem is only a couple weeks old since I just got CS5. I have been having trouble making any headway learning php since I cant seem to make it past the set up parts. I have done the php / mysql essential training on lynda.com with relative success except that I really dont want to work with any more exercise files so I didn't go on to the beyond the basics. I recently went thru most of the Dreamweaver CS5 and Wordpress 3. Also did the first 4 chapters of Dreamweaver CS5 with PHP and MySQL. I need to start integrating things into my live sites. I am also trying to work my way thru the learning php, mysql, javascript book by o'reily media by robin nixon (as fun as reading a math text book) can't get thru it since I can't relate any of it to my current sites/needs
I am on MacBookPro OSX 10.6.6
Installed MAMP to specification on all 20 tutorials I have tried including lynda.com
Tested the testing server and is working
Just installed dreamweaver cs5
have been using wordpress online to create and edit posts (recently upgraded to 3.? whatever the latest update was online which I believe update the files on my yahoo server?)
Have also installed wordpress on my computer (several times thru each tutorial trying to get this right.)
Am I expecting the impossible?If wordpress controls it's own connection why am I unable to use the live view. I have synced the remote site to my local computer so all the files should be just as they are online with the exception of the DB which contains most of the content.
I have done all of those steps. I have even exported the database from inside internet phpmyadmin and imported into computer phpmyadmin. When I hit live view I get one of couple of errors.
1. "One is that the dynamic related files could not be displayed due to an internal server error"
At some point I was able to view some sample files inside dreamweaver. But I would like to be able to view my real site files. I was able to "connect" to the local databases (not the copy of my real one - I think that maybe that was because it is somehow nested inside another db an am going try to reimport to new location). And then I changed the host/username/password trying to deal with the internal server error. Now instead I get the cannot connect to the database Error 2016 or whatever from the origianl post. Also, I am using yahoo if that matters and all I can find about what their server name is: mysql - is that correct?
I have been thru this so many times with so many different tutorials I am losing track of what is what.
2. Can I access my remote database within dreamweaver? I do not want to create dummy files (seems to be a waste of time). And while if it had worked exporting/importing a duplicate on to my computer would have satisfied me for a little while it also seems some what counter productive. Since every post and page is different if I were doing a daily updates etc how would I be able to change the formating or design of them if I can't access the remote files. Would I re- import everytime I want to work on it to get current database?
I am trying to be clear. I listed all the specs I could think as listed in your "how to get help fast post" (yes I read that at least twice too) of all of the steps and possible reasons for my problems. I also thought that the forum was on a seperate site so I didn't think it would count as a duplicate. I am frustrated to tears and am feeling incredibly stupid that after all this time and all these tutorials yes you are right I obviously am not understanding what is going on which is why I am on this forum. -
How to connect to a remote database in a lan??
Hey guys......! I need to connect to a remote msaccess database in a lan and import its data into my mysql database.I know how to connect to a msaccess database using ODBC.But I don't know how to connect to a remote database without creating dsn in the machine where database is.One thing more...I want to know, how can I import data into my mysql database?? Is there any query for that or simply I have to select data from msaccess database and insert into tables of my database??Please, send me the source code in the forum itself and explain also.This is the last feature of my project.So I need to do it as soon as possible.
If the mdb file in LAN, Just map the network drive.[Windows Explorer/Tools/Map Network Drive] in your system from which we need to access the remote mdb. Then go to ODBC Data Source Admin.. and create a new data source[Microsoft Access Driver] . After clicking the Select button, you will find a Network Drive will be visible on your Drives drop down. Select the map Drive, If not visible then just click the Network button there and map the network path where the mdb files reside. And use the JdbdOdbcDriver class to connect from java.
-
TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 10.4.3.1 YES NVRAM down down
GigabitEthernet0/1 10.12.10.26 YES NVRAM up up
Serial0/2/0 unassigned YES NVRAM down down
Serial0/2/0.602 10.12.15.10 YES NVRAM down down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS? -
Hi Gurus,
I am trying to mask the secured column from the table for one specified user, Here is the detail of DB and code which I am using to apply the security:
DB Version: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
Security Function:
create or replace function kr_sec_function_papf(p_object_schema IN VARCHAR2,
p_object_name VARCHAR2)
return varchar2
as
p_nid varchar2(200);
whoami varchar2(100);
begin
if SYS_CONTEXT('USERENV', 'SESSION_USER') = 'VPDTEST'
then
p_nid := 'national_identifier = national_identifier';
return (p_nid);
else
p_nid := '1=2';
return (p_nid);
end if;
end kr_sec_function_papf;
Code to Add Policy:
BEGIN
DBMS_RLS.ADD_POLICY(
object_schema => 'APPS',
object_name => 'PER_ALL_PEOPLE_F',
policy_name => 'secure_emp',
policy_function => 'kr_sec_function_papf',
statement_types => 'SELECT',
sec_relevant_cols=>'NATIONAL_IDENTIFIER',
sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
END;
I am getting error while executing the above plsql block, Error is:
ORA-28104: input value for sec_relevant_cols is not valid
ORA-06512: at "SYS.DBMS_RLS", line 20
ORA-06512: at line 2
Any one please help me to resolve the issue.
Thanks in Advance.
~Krishna Nand SinghHi Every one,
I got this issue resolved.
The issue is with parameter object_schema => 'APPS' , the object schema name is 'HR' and APPS has synonym with the same name.
The Correct code should be:
BEGIN
DBMS_RLS.ADD_POLICY(
object_schema => 'HR',
object_name => 'PER_ALL_PEOPLE_F',
policy_name => 'secure_emp',
policy_function => 'kr_sec_function_papf',
statement_types => 'SELECT',
sec_relevant_cols=>'NATIONAL_IDENTIFIER',
sec_relevant_cols_opt=>DBMS_RLS.ALL_ROWS);
END;
Thanks,
Krishna Nand Singh -
Error in Database Studio: Connect to user management database not possible
Hello,
Everytime I start the Database Studio 7.9 (the latest version 7.9.08.18) it show me the following error:
Could not access to user management
See Window -> Show View -> Event Log Viewer for more details
In Event Log Viewer I see the following information/errors/warnings:
Connect to user management database not possible. Try to use/create local default user management
Undefined result row
This error always appears in anything I do in the Database Studio application!
How can I correct this error? Can you help me please?
Any tips?
Kind regards,
samid raifHi Samid,
Delete the folder document & settings -> all users -> sdb
Post this check the results.
Regards,
Deepak Kori -
How do we connect to a remote database from a Java Stored Procedure?
We have a situation where we are not able to use a PSP (PL/SQL server page) to update a remote database using database link in an Oracle8i database. This is a known bug on 8i and is fixed in 9i. Can this be done using PSP calling a Java stored procedure, which in turn connects to the remote database and performs the update. If so, how we do remote connectivity to another database from the current java stored procedure.
We have a situation where we are not able to use a PSP (PL/SQL server page) to update a remote database using database link in an Oracle8i database. This is a known bug on 8i and is fixed in 9i. Can this be done using PSP calling a Java stored procedure, which in turn connects to the remote database and performs the update. If so, how we do remote connectivity to another database from the current java stored procedure.
-
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Maybe you are looking for
-
what can i do about this
-
Opening local .html files on iPad
I have created a personal homepage that I have loaded on my Macs at home. Any way I can use this file on my iPad 3?
-
EP 6.0 and ABAP UME Issue
Discovered a strange occurance when using EP6.0 SP19 with ABAP based UME. If you change the user details (email address for example) in SU01 - it is not reflected in the portal UME details BUT a change of the same users details in the portal UME is i
-
Send a table with a function.
Hi all!! I want to send a table with a function, but I don't know how to do it. in my code I have this. FUNCTION ZBORRAR. ""Interfase local *" TABLES TABLES: T751F. *" VARIABLES DATA: BEGIN OF S_CLA_MED_CAND. DATA: MASSN LIKE T751F-M
-
OWB 9.0.4 and OLAP
Hi, I have questions regarding the OWB 9.0.4 and his OLAP features. I tried to set up an Analytical Workspace and OLAP objects (dimensions and a cube) as it was written in the OWB904UsersGuide. Therefore I created an PL/SQL script with the OWB Export