ORA-022887 error during insert operation how to handle properly ...
Hello everyone I got an error during insert operation how to handle it properly ?
SQL statements given below.
INSERT INTO PERSONEL.TRANSLATIONS (TID,SCRIPT_NAME,TAG,TR,EN,LOCAL)
VALUES ((SELECT PERSONEL.SQX_TID.NEXTVAL AS TID FROM DUAL),'TEST_TEST','TEST','TR','EN','LOCAL');
thank you
I could not find an error like ORA-022887. What is the exact error you are getting? Do a cut and past of the error here.
Ok the proper error is ORA-02287: sequence number not allowed here
As already said just remove the select and use the sequence directly in the insert.
Edited by: Karthick_Arp on Sep 11, 2009 1:04 AM
Similar Messages
-
ORA-04088: error during execution of trigger
Error Description :
We have more than 100 of records in a csv file which we are processing through a script. At the first execution let
say it generates trigger exception for five records ... when I execute the script second time those five records
are not throwing any exception but may be some other records. But consecutive trigger exception is not happening for any record . If a particular record is throwing exception at first attempt then in the second attempts it's not throwing the trigger exception.
Input file
PROPRTY_ID,NAME,OLD STREET,CITY,STATE,ZIP,NEW STREET,NEW CITY,NEW STATE,NEW ZIP
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812
Error :
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812 - PROPERTY Update Error : ORA-00001: unique constraint (PROD.PK_AUDIT_LOG) violated
ORA-06512: at "PROD.PROPERTY_AUD", line 159
ORA-04088: error during execution of trigger 'PROD.PROPERTY_AUD'
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc property
Name Null? Type
PROPERTY_ID NOT NULL NUMBER(20)
TYPE_CODE VARCHAR2(10)
TYPE_PREFIX VARCHAR2(10)
DWELLING_TYPE_CODE NOT NULL VARCHAR2(10)
DWELLING_TYPE_PREFIX NOT NULL VARCHAR2(10)
STREET_NUMBER VARCHAR2(25)
STREET_DIRECTION CHAR(2)
STREET_NAME NOT NULL VARCHAR2(45)
UNIT_NUMBER VARCHAR2(15)
CITY_CODE VARCHAR2(10)
STATE NOT NULL CHAR(2)
ZIP_CODE VARCHAR2(10)
UNIT_TYPE VARCHAR2(10)
UNIT_PREFIX VARCHAR2(10)
COUNTY_CODE VARCHAR2(10)
COUNTRY_CODE NOT NULL VARCHAR2(10)
SQUARE_FEET NUMBER(6)
NUMBER_MOTHER_LAW_UNITS NUMBER(6)
YEAR_BUILT DATE
PROPERTY_VALUE NUMBER(12)
ZIP_PLUS_4 VARCHAR2(4)
SFI_REQ_FLAG CHAR(1)
LAST_MODIFIED NOT NULL DATE
LAST_MODIFIED_BY VARCHAR2(31)
STANDARDIZED_STATUS VARCHAR2(10)
STANDARDIZED_DESC VARCHAR2(200)
SQL> desc audit_log
Name Null? Type
SEQ_NO NOT NULL NUMBER(20)
TABLE_NAME VARCHAR2(31)
USER_STAMP VARCHAR2(31)
TIME_STAMP DATE
TRAN_CODE CHAR(2)
RECORD1 VARCHAR2(2000)
RECORD2 VARCHAR2(2000)
FLAG_FLD CHAR(1)
SFI_FLAG_FLD CHAR(1)
ERROR_NUMBER NUMBER
Update Query which is getting executed :
UPDATE PROPERTY
SET DWELLING_TYPE_CODE = 'SFR',
DWELLING_TYPE_PREFIX = 'DWELLING',
STREET_NUMBER = NULL,
STREET_DIRECTION = NULL,
STREET_NAME = ln_new_street_name, -- <From input file>
UNIT_NUMBER = NULL,
CITY_CODE = ln_city_code, -- <From other Table>
STATE = ln_new_state, -- <From input file>
ZIP_CODE = ln_new_zip_code,
UNIT_TYPE = NULL,
UNIT_PREFIX = NULL,
COUNTY_CODE = ln_county_code, -- <From Other table>
COUNTRY_CODE = 1,
ZIP_PLUS_4 = ln_zip_plus_4 -- <From Input file>
WHERE PROPERTY_ID = ln_property_id; -- <From Other table>
*NOTE :* Property.LAST_MODIFIED field is auto populate through other trigger. It does not causing any problem.
This might be helpful :
SQL> select OWNER, CONSTRAINT_NAME, TABLE_NAME,COLUMN_NAME from dba_cons_columns where CONSTRAINT_NAME='PK_AUDIT_LOG';
OWNER CONSTRAINT_NAME TABLE_NAME COLUMN_NAME
PROD PK_AUDIT_LOG AUDIT_LOG SEQ_NO
PROD_ARCH PK_AUDIT_LOG AUDIT_LOG SEQ_NO
SQL> select SEQ_NO, trim(RECORD1), trim(RECORD2),TIME_STAMP
from audit_log where RECORD1 like '%BUTTE%' order by TIME_STAMP;
SEQ_NO
1675677212
TRIM(RECORD1)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TRIM(RECORD2)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TIME_STAMP
22-sep-2010
Trigger Body which is fired and throwing the exception :
create or replace trigger PROPERTY_AUD
before insert or update on PROPERTY
for each row
declare
rec1 varchar2(2000);
rec2 varchar2(2000);
tcode char(1);
ln_seq_id NUMBER:=Null;
ls_sql VARCHAR2(2000):=Null;
begin
select temp_audit_seq.nextval into ln_seq_id from dual;
rec1 := null;
rec2 := null;
if user = 'NONREP_USER' then
return;
end if;
if (dbms_reputil.from_remote = FALSE) then
:NEW.last_modified := sysdate;
if (user = 'SALESFORCE_SYNC') then
:new.last_modified_by := NVL(:new.last_modified_by,USER);
else
:new.last_modified_by := user;
end if;
end if;
if inserting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'I';
elsif deleting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'D';
else
rec1 :=
LPAD(:old.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:old.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:old.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:old.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:old.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:old.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.STATE, 2, ' ' ) || '.' ||
RPAD(:old.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:old.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:old.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:old.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:old.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:old.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:old.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_DESC, 200, ' ' );
rec2 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'U';
end if;
ls_sql :='
INSERT INTO AUDIT_LOG
( seq_no,
table_name,
user_stamp,
time_stamp,
tran_code,
record1,
record2)
VALUES
( :id,
:s_table_name,
:s_user_name,
:d_sysdate,
:s_tcode,
:s_rec1,
:s_rec2
EXECUTE IMMEDIATE ls_sql
USING ln_seq_id,
'PROPERTY',
user,
sysdate,
tcode,
rec1,
rec2;
end;
Your suggestion is highly appreciated ..
Edited by: Bipul on Sep 23, 2010 12:40 AMTEMP_AUDIT_SEQ generates number with the increment of +1
Although there seems other sequence populating the AUDIT_LOG table through a different sequence with the increment of +10. So till now there are already 1179 different numbers residing in audit_log.seq_no and yet to be generated by the TEMP_AUDIT_SEQ sequence. I will look into more details.
SQL> select max(seq_no) from audit_log;
MAX(SEQ_NO)
1675689121
SQL> select TEMP_AUDIT_SEQ.nextval from dual;
NEXTVAL
1675677285
SQL> select count(*) From audit_log where seq_no>1675677285;
COUNT(*)
1179
SQL> select count(*) from audit_log where seq_no>1675677283 and mod(seq_no,2)=1;
COUNT(*)
1179
SQL> select seq_no from audit_log where seq_no>1675677283 and mod(seq_no,2)=1 and rownum<12;
SEQ_NO
1675677291
1675677301
1675677311
1675677321
1675677331
1675677341
1675677351
1675677361
1675677371
1675677381
1675677391
11 rows selected.
Thank you Lee and Herald ten Dam ... -
MS05 transaction throws "SQL error: error during INSERT (table: &)"
Hi Team,
I am a BASIS engineer on MM system. we have a strange problem from customers we see an error on the MS05 screen with "SQL error: error during INSERT (table: &)" and when the support team runs MS01 transaciton this error gets resolved.
What I would like to know is what could be the likely cause of this error and how we can prevent it.
When I check the SM21 logs i noticed one log with "Transaction cancellation 61 204 ( PLAF )"
and under additional document section is the log I see the below information
Usually, the reason for this error is that an entry already exists
with the same key.
This problem can occur if the client was copied with the movement data
without adjusting the number range intervals.
Please check if the number ranges for this table have been set
correctly and, if necessary, correct the number range interval.
I am from BASIS and I have no clue in how the MM transactions are linked can any MM gurus help in identifying the root cause for this problem.
any help on this is highly appreciated
thanks
VijayHi
Are MS05 & MS01 you're referring is a T-code?. if so, then they are associated with planning and a PP consultant can give a more clear picture on it. Try posting this to a PP forum.
Based on the error log, i guess this may arise because of the number range problem, when the document is getting saved and record is being tried to inserted into a table.
Thanks
E.Avudaiappan -
Oracle Java proc ORA-04045: errors during recompilation/revalidation
hi,
I have Oracle Java stored proc called MERGE_ENTITY_AND_EVENT invoked by a trigger. It was working fine for a couple of weeks. Today it throws this generic exception. I'm not sure what changed.
Caused by: java.sql.SQLSyntaxErrorException: ORA-04045: errors during recompilation/revalidation of TLMDEV./3ba8073b_Log4JLogger
ORA-06512: at "MERGE_ENTITY_AND_EVENT", line 1
ORA-06512: at "QUOTE_TRIGGER", line 49
1. What is the root cause of this exception ?
2. Whats the solution ?
If you dont know 1 or 2, how would you go about debugging this problem ?
Thanks in advance.The most likely cause is that something has caused the class TLMDEV./3ba8073b_Log4JLogger to become invalid and implicit invalidation does not succeed in making it valid. In general a class must be valid in order to be run and an attempt to run an invalid class (such as because your trigger calls it) will cause an attempt to validate it and if that attempt fails an ORA-04045 can be the result. Validation of a class amounts to iterating over the set of names referenced by the class and looking for a valid class by that name, perhaps recursively attempting to validate if an invalid class by that name is found. So validation of a class may amount to an attempt to validate several classes at once. If any of them fail to be validatable, which occurs if there is no class for a given referenced name then most if not all of the classes in the set being validated and certainly the top level one will fail to validate. So if things are working correctly, the ultimate reason for the ORA-04045 will prove to be that some name referenced by TLMDEV./3ba8073b_Log4JLogger or recursived by something it references will be a name for which there is no class in the database (or more precisely in the search path used which is typically the current schema followed by PUBLIC, but could be different if some of the classes involved have had explicit resolver specifications given for them). The thing to do to try to start determining what class is missing is to do the query
select owner||'.'||name||' : '||text from all_errors where type like 'JAVA%';
The first thing to look at are lines for TLMDEV./3ba8073b_Log4JLogger. These will probably show text which contains either ORA-29534 identifying a referenced class that exists but could not be recursively valid, or ORA-29521 identifying names for which there is no class. The latter are the ultimately interesting ones since the former will end up being recursively caused by them. So look at the ORA-29521s and then try to determine either why the class is missing and how to restore it or which it is now referenced when it wasn't before (which would happen if some class was changed to reference it or something that references it, recursively). -
Reference document 83246316 000020 (Error during Insert)
I am abap developer and my func person told me that he is trying to create the Billing document 83246316 in VF01 and we are getting the following error (Reference document 83246316 000020 (Error during Insert)). Can anyone lemme know how to solve this issue.
Do you think this would be the issue
XVBRP_KEY = XVBRP.
READ TABLE XVBRP WITH KEY XVBRP_KEY BINARY SEARCH.
CASE SY-SUBRC.
WHEN 4.
INSERT XVBRP INDEX SY-TABIX.
WHEN 8.
APPEND XVBRP.
WHEN OTHERS.
MESSAGE A004 WITH VBAP-VBELN VBAP-POSNR. <<<<<
ENDCASE.
The error occurs due an incorrect SY-SUBRC after reading table XVBRP
(SY-SUBRC not equal to 4 or 8). This means that the content of work area
XVBRP is inconsistent.
The problem is caused by a wrong source code in user exits or custom
copy routine. Please check in programs RV60AFZZ, RV60AFZA, RV60AFZB,
RV60AFZC, and RV60AFZD if you change the content of work area XVBRP.
Please make the same check also in the eventual customized routines
set in copy control. -
Cisco SG300 HOSTP_flash_operation: fatal error during read operation!
I have 2 Cisco SG300-52P switches. Earlier this week, one of them started dropping connections and POE was not working on a couple of devices... I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.
I have been waiting for some down time to do a firmware update, so I thought this might straighten things out. I Downloaded the updated bootloader and firmware from Cisco's site. Updating the (non-problem) SG300 went exactly as it should. Upgrading the the bootloader on the problem SG300 went exactly as it should. Started the firmware update on the problem switch ....... and it didn't come back online. The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it. There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input. I power cycled the SG300 and watched the messages go by ... It looked like everything was working. I even got a message that the "Initialization task was completed"..
Then this message "HOSTP_flash_operation: fatal error during read operation!"
We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that.
any suggestions?
putty output file attachedI am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash. It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
HTH -
Oracle Collaborate Suite ORA-6502 error during loging or form submitting
Hi!
I had Oracle Collaborate Suite ORA-6502 error during loging or form submitting:
Internal error (WWC-00006)
An unexpected error has occurred (WWS-32100)
ORA-6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWC-36000)
Unexpected error encountered in wwsec_api.person_info (ORA-06502: PL/SQL: numeric or value error: character string buffer too small) (WWC-41417)
Error (WWS-20000)
An unexpected error has occurred (WWS-32100)
ORA-6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWC-36000)
Unexpected error encountered in wwsec_api.person_info (ORA-06502: PL/SQL: numeric or value error: character string buffer too small) (WWC-41417).
This happened when:
I was using Russian letters in OCS HTML forms (for example - in Administration provision console or in my own HTML forms)
and only I work in Linux (with UTF-8 encoding) (in Windows with win1251 encoding all is OK).
My Database NLS not-null Parameters are:
NLS_LANGUAGE - AMERICAN
NLS_LENGTH_SEMANTICS - BYTE
NLS_TERRITORY - AMERICA
NLS_CHARACTERSET - AL32UTF8
NLS_NCHAR_CHARACTERSET - AL16UTF16
WHAT MUST I DO TO AVOID THIS SITUATION?
Thank
ValeryAll,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard -
ME-807 System error: error during insert in table EKKO in SM13
Hello Experts,
I have been searching a lot in SDN and in google about the ERROR ME-807 System error: error during insert in table EKKO but still i have not got any satisfactory answer.
In ME31K when I create the contract and put some validation check on target value filed in BADI Implementation ME_PURCHDOC_POSTED while saving it .
Now after rectfying the valdiation checks and saving the contract again i get this ERROR in SM13 and i can not even see the contract in ME33K. It says that doument does not exist.
Please let me know what could be the possible reason for this.
Thanks,
NaveenHi Jan,
This ERROR is coming from a function module ME_CREATE_DOCUMENT .
The code snippet from where this error s comin is as below:-
DATA: LS_EKUB_NEW TYPE EKUB.
DATA: L_EBELP LIKE IND_EKKI-EBELP,
L_TABIX LIKE SY-TABIX,
L_TABIX_1 LIKE SY-TABIX,
L_EHP4_P2PSE_ACTIVE TYPE XFELD.
------- Bestellkopf hinzufuegen -
MOVE NEKKO TO EKKO.
INSERT EKKO.
IF SY-SUBRC NE 0.
MESSAGE A807 WITH 'EKKO'.
ENDIF.
Thanks,
Naveen -
ORA-04045: errors during recompilation/revalidation
I was applying catlog.sql and catproc.sql, but has some problem during it, and now, when I try to access a database in the sqlplus appear follow errors:
ERROR:
ORA-04045: errors during recompilation/revalidation of
SYS.DBMS_APPLICATION_INFO
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 2
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 2
Error accessing package DBMS_APPLICATION_INFO
Someone know about it ??
ThanksWhat went wrong during catalog and catproc ?
Did you run out of space ? In that case just enable autoextension on the system tablespace datafile[s] and re-run catalog & catproc. Check the logfiles.
regards,
Ronald.
http://ronr.nl/unix-dba -
ME11 update error : Error during insert EINE with key
HI All,
I am facing the below problem..For one particular user update request is failing in ME11 transaction.Error was found in function module name ME_UPDATE_INFORECORD.I also check if it is number range problem but it is not the case..
Please help me out..
Thanks in advacne.Hi,
The problem is that only one user is getting sporadic failed update messages (since last 3-4 days) when using transaction ME11. The error as recorded in SM13 is "Error during insert EINE with key <Inforecord #> <Pur Org>".
I checked the table EINE for the key mentioned in the above message and found that there is a 2 years old record with the same key. Now, what I do not understand is that while creating a new Inforecord, why does SAP comes up with an old number instead of generating a new one from the number range object. I tried to search on SDN as well as OSS Notes, but could not find any mention to this problem.
And yes, it is an abend message with no short dump...
Thanks,
Gaurav
Edited by: Gaurav Malhotra on Feb 24, 2012 3:08 PM -
ME 807: System error: error during insert in table KONV
Hi,
I got the below error when creating PO using ME21N, what should I do?
ME 807: System error: error during insert in table KONV
Thanks.During the creation of Purchasing Orders the system displays the message "Error during insert in table KONV". The problem is solved and I would like to share the steps we use to solve the problem.
You can get details of the error in the Business Workplace (T-Code SBWP) or through the transaction SM13. The details of the error are:
Function Module
ME_CREATE_DOCUMENT
Status
Update was terminated
Report
LEINUU03
Row
167
Message
ME807 System error: error during insert in table KONV
I applied the SAP Note 1610553 - BAPI_PO_CHANGE: Header conditions are not transferred which describes exactly the problem but it was not solved.
The solution was creating a new Purchasing Record and, before saving, remove all the conditions in Header level and save the document. After that, it's possible to create documents without problem. -
ORA-04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
Hi,
i am on 11.5.10.2 RHEL 4.0
i tried running catalog.log on DB Tier as sys, but was not successful.
later sqlplus apps/apps would start giving
ORA-00604 : error occured at recursive SQL level 1
ORA-04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
$sqlplus /nolog works fine... BUT
$sqlplus conn /as sysdba HANGS!!!!
Also logging via URL > after clicking on E-Business Home Page gives
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, changeOnOHSInstall and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
could anybody suggest on this error?
Thanking You
Regards,
SKThanks for your quick reply
status of the object: INVALID
PLSQL_V2_COMPATIBLITY is set to FALSE
Run utlrp.sql to compile all invalid objects in the database
it gave me error as follows:
SQL> @utlrp.sql
declare
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
CREATE TABLE utl_recomp_invalid (obj# number)
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
CREATE TABLE utl_recomp_sorted (obj# number, depth number)
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
CREATE TABLE utl_recomp_compiled(obj# number)
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
CREATE INDEX utl_recomp_comp_idx1 ON utl_recomp_compiled(obj#)
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
CREATE TABLE utl_recomp_backup_jobs (command varchar2(100), status varchar2(1000))
ERROR at line 1
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
SELECT o.obj#, o.type#, o. owner# FROM obj# o
ERROR at line 2
ORA -00604 : error occured at recursive SQL level 1
ORA - 04045 : errors during recompilation/revalidation of SYS.DBMS_STANDARD
Edited by: mirage on Dec 4, 2008 6:45 PM -
System Error During Insert (Table KNMT SUBRC 4)
Hi All,
I am getting a peculiar error when i try to update KNMT table using the FM RV_CUSTOMER_MATERIAL_UPDATE.
When i run it directly in debug mode, entries are getting created perfectly.
But when i run it through RFC, before the FM is executed itself, during validation, i am getting an error in the message queue stating "System Error During Insert (Table KNMT SUBRC 4).
I cheked that KNMT table is empty. Also i had deleted all entries using the standard transaction VD52.
I found that there is a certain FM RV_CUSTOMER_MATERIAL_UPDATE_C which is described as Posting program for customer-material info (CALL mode).
But i am not sure what this does. I cannot view the documentation in my system and also this FM does not have any parameters.
Kindly let me know if anyone has encountered an error like this... Please let me know of any suggestions for resolution.
Thanks & Regards,
Mz
P.S : The Functionality seems to work intermittently... though not when i want it.
Edited by: Mazin Mahmood on Dec 8, 2011 9:09 AMHi,
The issue was that i was calling the function module RV_CUSTOMER_MATERIAL_UPDATE using an RFC.(ABAP Proxy) For some reason, while using an RFC, there is some issue with this function module and the database commit .
I had to recode using BDC (for transaction vd51) approach for creating a record in KNMT.
Thanks All,
Cheers,
Mz -
1 duplicate key error during insert into table
Dear Guru's
While upgrading the SAP_HR patch, I am facing this issue
Current level is SAPKE60455
Trying to apply patch - SAPKE60456
This is seen in the import log
Start import R3TRVDATV_512W_O ...
client 000: 1
client 001: 1
client 070: 1
client 080: 1
client 100: 1
client 320: 1
1 duplicate key error during insert into table T512T occured
End import R3TRVDATV_512W_O (with warnings)
Please help, thank in advance
R3trans is at version 6.19
Regards,
OmkarHello,
Issue was resolved after upgrading the R3trans
Regards,
Omkar -
G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation
0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site. The installation failed in the SAFE_OS phase with an error during BOOT operation. I see w10 bios updates for other models. Has anyone been successful in upgrading to W10 from W8?
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
Maybe you are looking for
-
//// Page jumps within InDesign Books ////
Howdy - I recently learned about the magic of Books in InDesign. I've got about 25 different files into a book and I want to reference an item that is in a different file by saying "please see section BLAH page BLAH" Easy to do within the same doc, b
-
I am thinking of upgrading my original iPhone to the latest 3gs version. Apple and ATT want $199 for the 16GB version. I want to give my original iPhone to my daughter to use as an iPod. Do I have to pay the $18 upgrade fee charged by ATT or can I ju
-
Hi i have procedure with in that i am calling a function .Will this be a single transaction or 2 transaction in oracle ? thanks Alish
-
Smart Folder Bug: Iphoto fails to match using 'filename' filter
Hi, this issue has popped up here: http://discussions.apple.com/message.jspa?messageID=6008267 and here: http://www.mac-forums.com/forums/showthread.php?t=22401 though I've yet to find an answer. Briefly, the problem: When using a smart album with a
-
2 Fairly Simple Things!! Help, Pictures & CD
Ok I have quite a bit of music on my Ipod from Cd's. The next Cd I want to add is Madonna "Immaculate Conception" (Greatest Hits) When I put that in, it goes up ut instead of song titles this one only says or reads like this in ITunes: Track 1 Track