Ora-03113 and ORA-00474 - database does not startup . Help !

- Its a Oracle 10.2.0.1.0 standard edition database.
- we get the ora-03113 end of file communication error during startup.
- when we followed step by step it happens between MOUNT => OPEN stage.
- database does mount but gives ora-03113 end of file communication error during OPEN.
- when I checked the alert log file and it has the following errors.
ORA-00447: fatal error in background process
ORA-00474: SMON process terminated with error
- i did run "recover database" command it says media recovery complete, but when I try to open it fails with ora-03113 error. Even a reset logs did not help
Question:
1) I wanted to somehow open the database even if there is a data loss ? how can I do that ?
2) Can I create a new instance and attach these datafiles/controlfiles/redo logs and be able to start the database ?
3) We have only 6 months old backup , so wanted to know if somehow we can open this database.
Thanks in advance

johnpau2013 wrote:
- Its a Oracle 10.2.0.1.0 standard edition database.
- we get the ora-03113 end of file communication error during startup.
- when we followed step by step it happens between MOUNT => OPEN stage.
- database does mount but gives ora-03113 end of file communication error during OPEN.
- when I checked the alert log file and it has the following errors.
ORA-00447: fatal error in background process
ORA-00474: SMON process terminated with error
- i did run "recover database" command it says media recovery complete, but when I try to open it fails with ora-03113 error. Even a reset logs did not help
Question:
1) I wanted to somehow open the database even if there is a data loss ? how can I do that ?
2) Can I create a new instance and attach these datafiles/controlfiles/redo logs and be able to start the database ?
3) We have only 6 months old backup , so wanted to know if somehow we can open this database.
Thanks in advancewhat clues exist within alert_SID.log file?
When was last time it started without error?
What exactly transpired since then?
what OS name & version?
Edited by: sb92075 on Mar 24, 2012 4:23 PM

Similar Messages

Youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.

youtube not opening in Safari browser. However it works with google browser. There is a red arrow coming, with https in you tube, and the page just does not open. help required.
It seems I have done some mistake when you tube was open, and i stopped one site to delete!
From then on it is not working.
Any solutions?
GV Joshi

Hi gajanan vasant!
I have a couple of articles for you that should help you troubleshoot your issue with Safari. First, you may want to try a reset on Safari by following the procedure listed in this article:
Safari 5.1 (OS X Lion): Reset Safari
http://support.apple.com/kb/PH5043
If you are still having issues after resetting Safari, you may want to check out this article about third-party add-ons in Safari:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/TS3230
Thanks for using the Apple Support Communities!
Regards,
Braden

ORA-03113 and ORA-03114 problems

Hi,
I'm experimenting Oracle8i. I'm installing 8.1.7 to RedHat Linux 7.0 out of box without recompiling the kernel. I set the SHMMAX to 0.5*258MB memory on the machine by echoing the number to /proc/sys/kernel/shmmax.
I checked that the system meets the requirements of Oracle's Installation Guide except SEMOPM. The RedHat Linux 7.0 sets it to 32, but Oracle requires 100.
I chose Oracle8i EE Typical Installation. The installation was ok to the point of running root.sh. Several syntax errors occur from root.sh. But they are minor syntax errors. I checked the code, regardless of errors, the scripts accomplished what it intends to do. The installation continued. I choose automatic configure Net8 when it ran Net8 Configuration Assistant and the Net8 Configuration was completed successful.
When it started Oracle Database Configuration Assistant, it created a database. But when it initialized the database, error messages ORA-03114 and ORA-03113 appeared many times. Each time, I chose to ignore. The final message was "Database creation completed with warnings."
After installation, I ran svrmgrl
$svrmgrl
SVRMGR> connect INTERNAL
Connected.
SVRMGR> startup
ORA-03113 end-of-file on communication channel
Checking the meaning of error messages, it says that if ORA-03113 occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server.
During installation, I chose Local naming method. There are following files in $ORACLE_HOME/network/admin/
listener.ora
sqlnet.ora
tnsnames.ora
shrept.lst
To my layman's eye, they looked ok. I can even telnet to the linux machine with database name, although I don't know how the machine has acquired the alias without any changes to /etc/named.conf nor any changes to any files in /var/named directory.
Please tell me what is correctly installed Net8? or what went wrong and how I should fix the problem.
Thanks,
Wayne
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

Database does not startup automatically

Oracle8i/Windows 2000 server
we have three database ,all are 9am to 6pm database
running on ARCHIVELOGMODE.
Few days back due to disk crash,
we have recovered our database using coldback up.
since we did not copy archive logs to different disk,
we lost some data.
disk was under warranty ,it was replaced.
then the database did not startup automatically.
okay the problem was,during booting(since 9am to 6pm database), we were daily logging in svrmgrl and startup the database manually.
now we have automated the above(startup) script in
windows scheduled task.
what to do to solve this problem.

Hi
c:\document and settings\admin>ORADIM -EDIT -SID <SID> -startmode auto -pfile D:\oradata\SID\initsid.ora
This will add few entries to the regedit
Go to regedit
HKEY_LOCALMACHINE\software\oracle
ORA_SID_PFILE=D:\oradata\SID\initsid.ora
ORA_SID_AUTOSTART=TRUE
check these values

ORA-03113 and ORA-07445 ACCESS_VIOLATION (again)

On:
10g
Windows 2003 server
IIS 6
ASP.NET 2.0
Oracle client 10.2.0.1.0
ODAC 10.2.0.2.21
odp.net 2.102.2.20
Validate Connection=true;Min Pool Size=0 in connection string
All odp.net connection, command and parameter objects are closed/disposed after use.
The issue:
ORA-03113 is returned to asp.net.
ORA-07445 ACCESS_VIOLATION is logged on database side. (see below)
It is ALWAYS the same select query (in stored procedure).
This is NOT a heavy query. Whole table is only 20K rows. (see below)
The rest of web application is UNAFFECTED. oracle connection and queries working normally.
Memory and threads used w3wp.exe are normal
Our only solution is for DBA to re-allocate table on db server.
I have read all related posts on this Forum but please any advice is welcome!
Thanks,
Adam
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [evaopn2+2896] [PC:0x15F3876] [ADDR:0x0] [UNABLE_TO_READ] []
Edited by: user10422769 on Sep 1, 2010 12:35 AM

according to this article:
<span> [Oracle ORA-07445 exception tips|<a class="smarterwiki-linkify" href="http://www.dba-oracle.com/t_ora_07445_exception_encountered.htm]">http://www.dba-oracle.com/t_ora_07445_exception_encountered.htm]</a>
</span>
ther is a lot of reasons for this issue I suggest that you try to do some action to try to understand where is the problem:
1. Change the connection string to contain only the schema parameter (no pooling parameters).
2. Change the select to return only 1:
_SELECT 1 as val_
FROM IIL_RUN_SETS ILRS
INNER JOIN IIL_RN_SET_STA_VALS ISSV
ON ILRS.ILRS_ID = ISSV.ILRS_ID
AND CURRENT_TIMESTAMP BETWEEN ISSV.TRANS_FROM AND ISSV.TRANS_TO
INNER JOIN IIL_RN_SET_STATUSES ISST
ON ISSV.ISST_ID = ISST.ISST_ID
INNER JOIN IIL_RUNS ILRN
ON ILRS.ILRS_ID = ILRN.ILRS_ID
LEFT OUTER JOIN IIL_RUN_LABELS IRLB
ON ILRN.IRLB_ID = IRLB.IRLB_ID
INNER JOIN IIL_RUN_STA_VALS IRSV
ON ILRN.ILRN_ID = IRSV.ILRN_ID
AND CURRENT_TIMESTAMP BETWEEN IRSV.TRANS_FROM AND IRSV.TRANS_TO
INNER JOIN IIL_RUN_STATUSES IRST
ON IRSV.IRST_ID = IRST.IRST_ID
INNER JOIN IIL_RUN_TYPES IRTY
ON ILRN.IRTY_ID = IRTY.IRTY_ID
INNER JOIN PRODUCTS PDCT
ON ILRN.PDCT_ID = PDCT.PDCT_ID
INNER JOIN USERS UPDATE_USER
ON ILRN.UPDATE_USER_ID = UPDATE_USER.USER_ID
WHERE ILRS.ILRS_ID ; = :B1
_AND rownum=1_
ORDER BY ILRN.ILRN_ID
if this result will not return the value that means that the problem is in the SQL/Procedure
3. Try to run on diffrent client - it maybe related to some ODP problem one one client.

ORA-03113 and ORA-01041 errors

One of our customer is getting intermittent errors in the XA log.
ORACLE XA: Version 8.0.5.0.0. RM name = 'Oracle_XA'.
095809.6179..0:
ORA-03113: end-of-file on communication channel
095820.6179..0:
ORA-01041: internal error. hostdef extension doesn't exist
What could possible be wrong ?
null

Rajesh Mahajan (guest) wrote:
: One of our customer is getting intermittent errors in the XA
log.
: ORACLE XA: Version 8.0.5.0.0. RM name = 'Oracle_XA'.
: 095809.6179..0:
: ORA-03113: end-of-file on communication channel
: 095820.6179..0:
: ORA-01041: internal error. hostdef extension doesn't exist
: What could possible be wrong ?
Hi Rajesh , in my opinion you lost the communication with your
server . The server could be shutdown an restart again while
your aplication is running or waiting for any execution. With
Oracle Forms this happen an the forms loose the conection with
the server , but seems that this aplication was already running.
You only get close the forms , in NT , with the Task Manager
and End the Task . In the Sql Plus ocuurs the same but you can
close the section or make another conection with your database.
I hope help you ,
Regards
Lourival
null

Ora-03113 and ora-01041 in Oracle 8i.

Hi,
When i run this script in SQL*plus, i los the comunication.
The script is the next.
create type prueba_t
create or replace type prueba_t
as object
(cod_prueba varchar2(8),
padre ref prueba_t)
create table prueba of prueba_t
cod_prueba not null
alter table prueba add
(scope for (padre) is prueba)
In the last sentence Oracle send me the next message.
ORA-03113: end-of-file on comunication channel.
If you know this problem help me Please.

rothen_s wrote:
I've read the document 17613.1 in metalink. I did what is written in section C, i.e. I identified the part of the SQL statement that causes the error. Could someone of Oracle please answer to this?
Well, if you have metalink access, you should raise this as an issue. That's the best way to talk to Oracle about it. The forum may have a few Oracle people hanging around occasionally, but in general we're just volunteers with our own jobs around the world. ;)

Export failed, ORA-03113 and ORA-01041

Hello,
I'm trying to do a full export of my DB,I have installed Oracle 9i dataserver(configured in shared mode) on Windows 2k, and the following error appears me:
. exportando acciones y objetos de procedimiento pre-esquema
EXP-00008: se ha encontrado un error 3113 de ORACLE
ORA-03113: fin de archivo en el canal de comunicación
EXP-00008: se ha encontrado un error 1041 de ORACLE
ORA-01041: error interno. No existe la extensión hostdef
EXP-00000: La exportación no ha terminado correctamente
I don't understand it, because I have 2 other DB instances created in the same data server and their exportation have finished correctly.
Any idea?¿
Thanks a lot,
Mabel

Hi,
Here is the error description for error 1041:01041, 00000, "internal error. hostdef extension doesn't exist"
// *Cause: Pointer to hstdef extension in hstdef is null.
// *Action: Report as a bugAction is to report as a bug. you should open an iTar on Metalink.
Regards,
Yoann.

ORA-03113 and ORA-03114

Hi..
When I access our Oracle database with SQL*Plus, from a client machine, after 10 or 15 minutes without requests to the server database, I get these error messages. But when I am running the proccesses from the machine server, it's not happens.
Could anyboby help me?
Thanks in advance.
Rafael.
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

Questions regardin "Oracle Database does not support Hyper-V and "

Platform 287 Microsoft Windows Server 2008 (64-bit Itanium)
1 - Can you give me some details about what is not supported of the Hyper-V environment?
2 - There are know issue running Oracle in a Hyper-V child partition/virtualized partition ?
2 - There are know issue about curruption of datafile using snapshoting,
Thanks in advance.

Hello.
Can anybody explain, how should I understand this "Certification Information" from Oracle metalink?
==Quote ==
"Oracle Database is certified with the following Windows Server 2008 editions:
* Windows Server 2008 Standard (x86 and x64)
Oracle Database does not support Hyper-V and Server Core in Windows Server 2008.
==/Quote==
Does it mean that this OS is supported, but only if it does not run in Hyper-v configuration?
Thanks for your advice.
Jakub

ORA-02070 database does not support semi join in this context

The following merge sql on Oracle 11g throws "ORA-02070 database does not support semi join in this context".
MERGE INTO ORDERS tgt
USING
SELECT C.short_name, C.customer_id
FROM customers C
WHERE customer_id IN ( SELECT distinct customer id FROM orders O WHERE O.order_date > SYSDATE - 3 )
)src
ON ( tgt.customer_id=src.customer_id )
WHEN MATCHED THEN
UPDATE SET tgt.short_name=src.short_name;
Any ideas? This piece of code was working on an earlier version of Oracle 11g.
Thanks,
Anu

Hi, Anu,
You can try this:
MERGE INTO ORDERS     tgt
USING
        SELECT C.short_name, C.customer_id
     FROM      customers C
)                src
ON (     tgt.customer_id = src.customer_id
   AND     tgt.order_date     > SYSDATE - 3
WHEN MATCHED THEN
     UPDATE SET     tgt.short_name = src.short_name; It's surprising that the error message mentioned a semi-join, because you weren't doing a semi-join. An example of a semi-join is:
MERGE INTO ORDERS     tgt
USING
        SELECT DISTINCT
               C.short_name, C.customer_id
     FROM        customers C
     JOIN       orders    o     ON c.customer_id = o.customer_id
     WHERE       o.order_date     > SYSDATE - 3
)                src
ON (tgt.customer_id = src.customer_id)
WHEN MATCHED THEN
     UPDATE SET     tgt.short_name = src.short_name; but perhaps the optimizer re-wrote your IN sub-query as a semi-join.
An EXISTS sub-query is another way to get the results you want, unless it causes ORA-02070, also. Natrually, I can't test anythihng, since you didn't post any sample data.
Edited by: Frank Kulash on Apr 5, 2011 11:34 AM

Error: ORA-16532: Data Guard broker configuration does not exist

Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.

Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

ERROR: ORA-01041: internal error. hostdef extension does not exist

Hi, I got the following error message when I tried to insert a row in table TBL_ORDER.
ERROR:
ORA-01041: internal error. hostdef extension does not exist
INSERT into TBL_ORDER
ERROR at line 1:
ORA-03113: end-of-file on communication channel
We have Oracle version 8.1.5.o.2 and Linux version 6.1.
Following are the tables, triggers, loadjava definition and source programs:
TBL_ORDER
1 ORDER_MEMBER_FIRM_ID VARCHAR2(4)
2 ORDER_CLIENT_ID VARCHAR2(4)
3 ORDER_BRANCH VARCHAR2(3)
4 ORDER_SEQUENCE VARCHAR2(4)
5 ORDER_EXCHANGE_ID VARCHAR2(3)
6 ORDER_EXCHANGE_SEQUENCE VARCHAR2(7)
7 ORDER_CREATE_DATE DATE
8 ORDER_TYPE VARCHAR2(2)
9 ORDER_STATUS VARCHAR2(1)
10 ORDER_SYMBOL VARCHAR2(5)
11 ORDER_SUFFIX VARCHAR2(14)
12 ORDER_SIDE VARCHAR2(5)
13 ORDER_PRICE VARCHAR2(20)
14 ORDER_STOP_PRICE VARCHAR2(20)
15 ORDER_PRICE_QUAL VARCHAR2(10)
16 ORDER_QUANTITY VARCHAR2(6)
17 ORDER_TIF VARCHAR2(4)
18 ORDER_AON VARCHAR2(4)
19 ORDER_DNR VARCHAR2(4)
20 ORDER_CASH_NEXT_DAY VARCHAR2(4)
21 ORDER_SELLER VARCHAR2(4)
22 ORDER_ACCOUNT_TYPE VARCHAR2(4)
23 ORDER_OS_TS VARCHAR2(4)
24 ORDER_BOOTH_ID VARCHAR2(4)
TBL_CMSOUT
1 CMSOUT_MEMBER_FIRM_ID VARCHAR2(4)
2 CMSOUT_CLIENT_ID VARCHAR2(4)
3 CMSOUT_DATA VARCHAR2(120)
trg_order.sql
create or replace procedure OrderToCmsoutProc(cms_member_firm_id VARCHAR2,
cms_client_id VARCHAR2,
cms_branch VARCHAR2,
cms_sequence VARCHAR2,
cms_side VARCHAR2,
cms_quantity VARCHAR2,
cms_symbol VARCHAR2,
cms_price VARCHAR2,
cms_tif VARCHAR2,
cms_type VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'OrderToCmsout.test(java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_order
after insert on TBL_ORDER
for each row
CALL OrderToCmsoutProc (:new.order_member_firm_id,
:new.order_client_id,
:new.order_branch,
:new.order_sequence,
:new.order_side,
:new.order_quantity,
:new.order_symbol,
:new.order_price,
:new.order_tif,
:new.order_type)
commit;
show errors;
exit;
trg_cmsout.sql
create or replace procedure PackCmsoutSidProc(pck_member_firm_id VARCHAR2,
pck_client_id VARCHAR2,
pck_data VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'PackCmsoutSid.test(java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_cmsout
after insert on TBL_CMSOUT
for each row
CALL PackCmsoutSidProc (:new.cmsout_member_firm_id,
:new.cmsout_client_id,
:new.cmsout_data)
commit;
show errors;
exit;
loadORDERjava
loadjava -r -f -o -user userid/pswd OrderToCmsout.java
loadCMSOUTjava
loadjava -r -f -o -user userid/pswd PackCmsoutSid.java
OrderToCmsout.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class OrderToCmsout {
public static void main(String args[]) {
try {
test (args[0],args[1],args[2],args[3],args[4],
args[5],args[6],args[7],args[8],args[9]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test ( String parm_member_firm_id,
String parm_client_id,
String parm_branch,
String parm_sequence,
String parm_side,
String parm_quantity,
String parm_symbol,
String parm_price,
String parm_tif,
String parm_type)
throws SQLException
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt2;
try {
stmt2= conn.prepareStatement
("INSERT INTO TBL_CMSOUT VALUES (?, ?, ?)");
String datastring = parm_member_firm_id + "\\~" +
parm_branch + " " +
parm_sequence + "\\~" + "\\~" +
parm_side + "\\~" +
parm_quantity + " " +
parm_symbol + " " +
parm_price + "\\~" +
parm_tif + " " +
parm_type + "\\~";
stmt2.setString(1, parm_member_firm_id);
stmt2.setString(2, parm_client_id);
stmt2.setString(3, datastring);
stmt2.executeUpdate();
stmt2.close();
return;
} //try
catch (Exception e) {
System.err.println(e);
} //catch
PackCmsoutSid.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class PackCmsoutSid {
public static void main(String args[]) {
try { test(args[0],args[1],args[2]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test( String parm_member_firm_id,
String parm_client_id,
String parm_data)
throws SQLException
try {
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt1 = conn.prepareStatement
("SELECT sid_session_id " +
"FROM tbl_sid " +
"WHERE sid_member_firm_id = ? and " +
"sid_client_id = ?");
stmt1.setString(1, parm_member_firm_id);
stmt1.setString(2, parm_client_id);
ResultSet rs1 = stmt1.executeQuery();
while (rs1.next ()) {
String session_id_found = rs1.getString
("sid_session_id");
CallableStatement pack_pipe = conn.prepareCall
("{call DBMS_PIPE.PACK_MESSAGE(?)}");
pack_pipe.setString(1, parm_data);
pack_pipe.execute();
CallableStatement send_pipe = conn.prepareCall
("{? = call DBMS_PIPE.SEND_MESSAGE(?)}");
send_pipe.registerOutParameter
(1, java.sql.Types.INTEGER);
send_pipe.setString (2, session_id_found);
send_pipe.execute();
} //while
stmt1.close();
conn.close();
} //try
catch (Exception e) {
System.err.println(e);
} //catch
} //test
} //PackCmsoutSid
Thanks in advance for your help
Vinicio

you should post this question on the Application Server forum.
--Olaf

ORA-04043: object SYS.DELTA$SESSION does not exist

Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil Alshaibani

SQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM

ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist

Hi,
We are experiencing the following error when trying to retrieve data from the OLAP layer in our front-end:
ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
to be more specific, the following happens:
We are using the Oracle OLAP Java api's to query the analytical workspace. We create a Source object that contains the joins we want. This source is prepared and committed via the TransactionProvider class. Via the DataProvider we then create an SQLCursorManager and generate the SQL and execute it via JDBC.
We were able to execute it without problems on an XP development platform. When switching to another platform that we use, it gives the following error messages:
(platform with the error is Linux x86-64; more version info further down)
Caused by: java.sql.SQLException: ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
ORA-06512: at "SYS.OLAPIMPL_T", line 23
ORA-06512: at "SYS.OLAPIMPL_T", line 17
ORA-06512: at line 4
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:352)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:894)
at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:384)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:984)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
Platform/version info that produces the error:
Linux x86-64
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
OLAP A patch for 10.2.0.3 is applied.
Platform where this works without problems:
Windows XP
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Any info on resolving this issue is greatly appreciated!
Thanks,
Ed

Hi Keith,
Yesterday I actually fully rebuilt/redeployed the AW. (I only patched our 10.2.0.3 installation with the OLAP A patch very recently.) Even the AW's tablespace was recreated, just to make sure everything was gone. Redeployment of the OLAP objects from OWB control center went without any problems.
Let me answer your questions one by one below.
1) How did you build the AW?
We use OWB. The only thing I used AWM for is to actually create the AW. Once created, I use OWB to design and deploy. The front-end developers use AWM sometimes for viewing data in the OLAP objects. (I use OWB or AWM for that.)
2) Can you connect to the AW via AWM, if so can you use the Data Viewer option to view:
a) each dimension and check you can drill up and down.
b) each cube
I have been playing around a bit with the dim's and cubes in the AWM by right-clicking and selecting view data ... (that's the data viewer option?) and encountered no problems.
3) You are using the OLAP API directly, what sort of application are you building - Java Client, JSP, Applet and are you using BI Beans?
We are building a JSP type application, but so far only servlet code is being executed as the failure occurs on issuing the query. We are not using BI BEans.
Thanks for your feedback!
grts,
Ed

Ora-03113 and ORA-00474 - database does not startup . Help !

Similar Messages

Maybe you are looking for