ORA-04030 error on backup

Hi all,
I´m using oracle 9.2.0.4 with Red Hat9 (memory: 2GB).
I´m trying to perform a backup by using RMAN, but now I get the error like this:
kgefec: fatal error 0
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03015: error occurred in stored script saturday_backup
RMAN-03009: failure of backup command on c1 channel at 12/09/2007 06:22:30
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 2: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 200 bytes (PL/SQL DIANA,LISIMA: Add cells)Somebody nows about this error?
It seems memory problem , but it began to occur a few days ago.
Thanks!!!!

There's a bug reported:
Bug 3174292 - Proxy backup generates huge PLSQL code with many datafiles
Doc ID: Note:3174292.8
Should be fixed in 9.2.0.6 .
Werner

Similar Messages

ORA-19870: error reading backup piece

Hi ,
The RMAN Image backup failes with the error
channel ORA_DISK_1: reading from backup piece /backups/RMAN/mkkl1143_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2009 16:33:53
ORA-19870: error reading backup piece /backups/RMAN/mjkl1143_1_1
ORA-19625: error identifying file /backups/RMAN/data_DR-PROD_I-987881832_TS-APPS_TS_TX_IDX_FNO-526_dgkhaqgn
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
I have catalog the backpeince and resync the database and triggered the backup again,but still the same issue
Can anyone throw some light
Regards,
Hussain

I believe that RMAN literally cannot either 1) find the file or 2) access the file due to permissions on the backup file piece or the RMAN directory above it.
Cheers!
Jay Caviness
http://www.grumpy-dba.com

RMAN ORA-19870: error reading backup piece 'location'

Hi All ,
I have run a restore from a RMAN backup and i got this error :
ORA-19870: error reading backup piece XX_df_23_11_2011_XXX_1_1.rman
ORA-19599: block number 616206 is corrupt in backup piece XX_df_23_11_2011_XXX_1_1.rmanThough the RMAN backup is still going on , it has not errored out, How can i find what all gets missing from the Source database , as in what all is present in the missing block ?
What is the use of MAXCORRUPT parameter ? can that be used here ? can this be prevented if i use maxcorrupt =1 and then run the restore ?
Also , Is there any way in which i can verify that all the backups are perfect before i drop my earlier database and run the restore. I think its the validate command but I am not sure, hence seek expert suggestion.
Please suggest
Thanks
Kk
Edited by: Kk on Dec 1, 2011 3:04 AM

RMAN backup Fails with ORA-19599,ORA-19600 and ORA-19601 [ID 779386.1]

Ora-19870 error reading backup piece during installation

Hi,
I am trying to install oracle10g database on windows.
i am installing database software and database together and i keep getting this error half way throu installation.
"ora-19870 error reading backup piece during installation"
how can i solve this.
Can someone help me please.
Thanks,
Philip.

Hi,
sorry man. i still have that problem.
i could not find any solutions so far.
if i find any i will let you know.
but for now i have decided to install in another PC.
Philip.

Need help to avoid ORA-04030 error

Oracle version : 11.1.0.6.0
OS - Solaris 64bit Sparc
Hi All,
Today we have recieved the below error messeges in the alert log.
ORA-04030: out of process memory when trying to allocate 56 bytes (callheap,kghscAllocDataElem:dataElem)
ORA-04030: out of process memory when trying to allocate 184 bytes (callheap,temporary memory)
ORA-04030: out of process memory when trying to allocate 56 bytes (callheap,temporary memory)
Trace dumping is performing id=[cdmp_20110222134605]
Tue Feb 22 13:46:52 2011
Sweep Incident[104533]: completed
Sweep Incident[104532]: completed
Sweep Incident[104531]: completed
Sweep Incident[104530]: completed
Sweep Incident[104528]: completed
Tue Feb 22 17:04:25 2011
SYS@MYDB>!oerr ora 4030
04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
//*Cause: Operating system process private memory was exhausted.
//*Action:I came to know that it was due to the operating system prvate memory exhausted. Database memory configuration is as below
SYS@MYDB>show parameter sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 2000M
sga_target                           big integer 0
SYS@MYDB>show parameter pga
NAME                                 TYPE        VALUE
pga_aggregate_target                 big integer 521658240
SYS@MYDB>OS Memory information
load averages: 1.58, 1.82, 2.13;                    up 196+10:43:15                                                         20:55:35
408 processes: 406 sleeping, 2 on cpu
CPU states: 80.0% idle, 15.6% user, 4.4% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 18G free mem, 43G total swap, 42G free swapThere are other 2 more databases are running on this server, one is 10g and another one is 9i and its memory configuration have given below respectivly
SQL>show parameter sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 4G
sga_target                           big integer 4G
RPT>show parameter pga
NAME                                 TYPE        VALUE
pga_aggregate_target                 big integer 4G
SQL> show parameter sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 1135171060
SQL> show parameter pga
NAME                                 TYPE        VALUE
pga_aggregate_target                 big integer 2147483648
SQL>Could you please suggest me how to avoid this error in future ? Looks like i need to fine tune the memory parameters, could you please suggest how can i do so ? I also noticed SGA Target is set to 0 (Automatic Memory managment is not enabled), If i set SGA target will resolve the issue ?
Kindly advise ..
Thanks in advance
Nishant

I just took the plan by setting set autotrace traceonly explain. Please check this will help, I will check and update you the table's statistics soon.
Execution Plan
Plan hash value: 1841079096
| Id | Operation                               | Name               | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                        |                    |   210M|    96G|       |    29M (1)| 99:12:47 |
|   1 | SORT ORDER BY                          |                    |   210M|    96G|       |    29M (1)| 99:12:47 |
|   2 |   HASH UNIQUE                           |                    |   210M|    96G| 1000K| 41115   (2)| 00:08:14 |
|   3 |    CONCATENATION                        |                    |       |       |       |            |          |
|   4 |     NESTED LOOPS                        |                    |       |       |       |            |          |
|   5 |      NESTED LOOPS                       |                    |   980 |   470K|       | 34365   (2)| 00:06:53 |
|   6 |       NESTED LOOPS                      |                    |   980 |   455K|       | 33384   (2)| 00:06:41 |
|   7 |        NESTED LOOPS                     |                    |   980 |   445K|       | 32893   (2)| 00:06:35 |
|* 8 |         HASH JOIN                       |                    |   980 |   434K| 7968K| 31912   (2)| 00:06:23 |
|   9 |          NESTED LOOPS                   |                    | 19606 | 7735K|       | 28804   (2)| 00:05:46 |
|* 10 |           HASH JOIN                     |                    |     1 |   306 |    11M| 27300   (2)| 00:05:28 |
| 11 |            TABLE ACCESS FULL            | VERSION_FILE_MAP   |   517K| 6064K|       | 2275   (3)| 00:00:28 |
|* 12 |            HASH JOIN                    |                    |   296K|    83M|    11M| 20121   (2)| 00:04:02 |
|* 13 |             HASH JOIN                   |                    |   296K| 8401K| 7168K| 4103   (4)| 00:00:50 |
| 14 |              INDEX FAST FULL SCAN       | ATTACHMENT_PK      |   407K| 2389K|       |   280   (3)| 00:00:04 |
|* 15 |              HASH JOIN                  |                    |   296K| 6663K| 8408K| 2966   (4)| 00:00:36 |
| 16 |               TABLE ACCESS FULL         | ATTACHMENT_MAP     |   296K| 4925K|       | 1810   (5)| 00:00:22 |
| 17 |               INDEX FAST FULL SCAN      | VERSION_PK         |   482K| 2829K|       |   317   (3)| 00:00:04 |
| 18 |             TABLE ACCESS FULL           | FILES              |   509K|   128M|       | 8744   (1)| 00:01:45 |
|* 19 |           TABLE ACCESS FULL             | ATTACHMENT         | 31967 | 3059K|       | 1504   (2)| 00:00:19 |
| 20 |          TABLE ACCESS FULL              | VERSION            |   482K|    23M|       | 1290   (2)| 00:00:16 |
|* 21 |         TABLE ACCESS BY INDEX ROWID     | VERSION            |     1 |    12 |       |     1   (0)| 00:00:01 |
|* 22 |          INDEX UNIQUE SCAN              | VERSION_PK         |     1 |       |       |     1   (0)| 00:00:01 |
|* 23 |        INDEX UNIQUE SCAN                | PAGE_THREE_PK      |     1 |    10 |       |     1   (0)| 00:00:01 |
|* 24 |       INDEX UNIQUE SCAN                 | PAGE_TWO_PK        |     1 |       |       |     1   (0)| 00:00:01 |
| 25 |      TABLE ACCESS BY INDEX ROWID        | PAGE_TWO           |     1 |    16 |       |     1   (0)| 00:00:01 |
| 26 |     NESTED LOOPS                        |                    |       |       |       |            |          |
| 27 |      NESTED LOOPS                       |                    |     1 |   492 |       | 6644   (2)| 00:01:20 |
| 28 |       NESTED LOOPS                      |                    |     1 |   227 |       | 6643   (2)| 00:01:20 |
| 29 |        NESTED LOOPS                     |                    |     1 |   215 |       | 6641   (2)| 00:01:20 |
| 30 |         NESTED LOOPS                    |                    |     1 |   209 |       | 6640   (2)| 00:01:20 |
| 31 |          MERGE JOIN CARTESIAN           |                    |     1 |   192 |       | 6639   (2)| 00:01:20 |
| 32 |           NESTED LOOPS                  |                    |       |       |       |            |          |
| 33 |            NESTED LOOPS                 |                    |     1 |   186 |       | 6359   (2)| 00:01:17 |
| 34 |             NESTED LOOPS                |                    |     1 |   170 |       | 6358   (2)| 00:01:17 |
| 35 |              NESTED LOOPS               |                    |     1 |   158 |       | 6357   (2)| 00:01:17 |
|* 36 |               HASH JOIN                 |                    |     1 |   148 |    28M| 6356   (2)| 00:01:17 |
| 37 |                TABLE ACCESS FULL        | VERSION            |   482K|    23M|       | 1290   (2)| 00:00:16 |
|* 38 |                TABLE ACCESS FULL        | ATTACHMENT         |   407K|    38M|       | 1504   (2)| 00:00:19 |
|* 39 |               INDEX UNIQUE SCAN         | PAGE_THREE_PK      |     1 |    10 |       |     1   (0)| 00:00:01 |
|* 40 |              TABLE ACCESS BY INDEX ROWID| VERSION            |     1 |    12 |       |     1   (0)| 00:00:01 |
|* 41 |               INDEX UNIQUE SCAN         | VERSION_PK         |     1 |       |       |     1   (0)| 00:00:01 |
|* 42 |             INDEX UNIQUE SCAN           | PAGE_TWO_PK        |     1 |       |       |     1   (0)| 00:00:01 |
| 43 |            TABLE ACCESS BY INDEX ROWID | PAGE_TWO           |     1 |    16 |       |     1   (0)| 00:00:01 |
| 44 |           BUFFER SORT                   |                    |   407K| 2389K|       | 6638   (2)| 00:01:20 |
| 45 |            INDEX FAST FULL SCAN         | ATTACHMENT_PK      |   407K| 2389K|       |   280   (3)| 00:00:04 |
|* 46 |          TABLE ACCESS BY INDEX ROWID    | ATTACHMENT_MAP     |     1 |    17 |       |     2   (0)| 00:00:01 |
|* 47 |           INDEX RANGE SCAN              | ATTACHMENTMAP_IDX3 |     1 |       |       |     1   (0)| 00:00:01 |
|* 48 |         INDEX UNIQUE SCAN               | VERSION_PK         |     1 |     6 |       |     1   (0)| 00:00:01 |
| 49 |        TABLE ACCESS BY INDEX ROWID      | VERSION_FILE_MAP   |     1 |    12 |       |     2   (0)| 00:00:01 |
|* 50 |         INDEX RANGE SCAN                | VERSION_FMAP_IDX2 |     1 |       |       |     1   (0)| 00:00:01 |
|* 51 |       INDEX UNIQUE SCAN                 | FILES_PK           |     1 |       |       |     1   (0)| 00:00:01 |
|* 52 |      TABLE ACCESS BY INDEX ROWID        | FILES              |     1 |   265 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   8 - access("A"."ID"="VERSION"."ATTACH_ID" AND "A"."LATEST_VSN"="VERSION"."ID")
       filter("A"."LATEST_VSN">="VERSION"."ID")
10 - access("C"."ID"="D"."VERSION_ID" AND "D"."FILE_ID"="E"."ID")
12 - access("E"."ID"="A"."FILE_ID")
13 - access("A"."ATTACH_ID"="B"."ID")
15 - access("A"."LATEST_VSN"="C"."ID")
19 - filter(NVL("A"."DELETE_FLAG",0)=0 AND ("CTXSYS"."CONTAINS"("A"."DESCRIPTION",'EHS%')>0 OR
              "CTXSYS"."CONTAINS"("E"."CONTENT_URL",'EHS%')>0 AND "E"."CONTENT_URL" IS NOT NULL))
21 - filter("A"."ID"="D"."ATTACH_ID")
22 - access("A"."LATEST_VSN"="D"."ID")
23 - access("A"."ID"="C"."ID" AND "A"."CLASS"="C"."CLASS")
24 - access("A"."ID"="B"."ID" AND "A"."CLASS"="B"."CLASS")
36 - access("A"."ID"="VERSION"."ATTACH_ID" AND "A"."LATEST_VSN"="VERSION"."ID")
       filter("A"."LATEST_VSN">="VERSION"."ID")
38 - filter(NVL("A"."DELETE_FLAG",0)=0)
39 - access("A"."ID"="C"."ID" AND "A"."CLASS"="C"."CLASS")
40 - filter("A"."ID"="D"."ATTACH_ID")
41 - access("A"."LATEST_VSN"="D"."ID")
42 - access("A"."ID"="B"."ID" AND "A"."CLASS"="B"."CLASS")
46 - filter("A"."FILE_ID"=0)
47 - access("A"."ATTACH_ID"="B"."ID")
48 - access("A"."LATEST_VSN"="C"."ID")
50 - access("C"."ID"="D"."VERSION_ID")
51 - access("D"."FILE_ID"="E"."ID")
       filter(LNNVL("E"."ID"="A"."FILE_ID"))
52 - filter("CTXSYS"."CONTAINS"("A"."DESCRIPTION",'EHS%')>0 OR
              "CTXSYS"."CONTAINS"("E"."CONTENT_URL",'EHS%')>0 AND "E"."CONTENT_URL" IS NOT NULL)

ORA-04030 error

Database 8i
OS wndows 2000 server
RAM 1.5 GB
SGA 1136617500 bytes
getting error ORA-04030: Out of process memory when running dbms_stats.gather_schema_stats procedure.
after reducing e size of sort_area_size from 40 M to 10 M above procedure has been successfully completed but problem is this sort_area_size is not suitable
for my normal batch processing How to decide about optimum sort_area_size?
.

In the init.ora
PARALLEL_MAX_SERVERS specifies the maximum number of parallel execution processes and parallel recovery processes for an instance. As demand increases, Oracle increases the number of processes from the number created at instance startup up to this value.
If you set this parameter too low, some queries may not have a parallel execution process available to them during query processing. If you set it too high, memory resource shortages may occur during peak periods, which can degrade performance.

Workaround for ORA-04030 error

hi,
we've encountered the following error:
ORA-04030: out of process memory when trying to allocate 296 bytes (callheap, koposal dvoid)
all of the research i've done points to setting up the database with a Very Large Memory configuration, which will be carried out at a later date as we're still in the development stage.
is there a possible workaround for this error?
thanks
santosh sewlal

hi,
we're inserting into tables - spatial data and images, from a C#.net application that sends data to the db in a BLOB

Nested tables and memory usage (ORA-04030 error)

Dear All,
I have table with approximately 5,000,000 records
and try to Bulk Collect part of it into nested table in PL/SQL, the code is bellow
Declare
     Type TcardRec Is Record(
          serno Pls_Integer,
          numberx Char(16),
          caccserno Pls_Integer
     Type TcardList Is Table Of TcardRec;
     fcardInfo TcardList;
Begin
Select c.serno, substr(c.numberx,1,16), c.caccserno
Bulk Collect Into fcardinfo
From cardx c;
End;
After reading approx. 80% it fails with error
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu call ,pmucalm coll)
I 2G memory, is it realy no enough?
How can I tune memory usage for collection?
How can I estimate the maximum size of the collection the will fit into memory?
Thank you in advance for any help
Artem

Declare it as a cursor.
Open the cursor.
Use fetch bulk collect with the limit option in the loop.
In your case, you could do like:
Declare
Cursor c1 is
Select c.serno, substr(c.numberx,1,16), c.caccserno
From cardx c;
TcardList Is Table Of c1%rowtype;
fcardInfo TcardList;
Begin
Open c1;
Loop
Fetch c1 Bulk Collect Into fcardInfo Limit 10000;
Exit when c1%notfound;
-- Do some processing here.
End Loop;
Close c1;
End;
I hope this helps.

ORA-04030 error on Oracle 10g R2 and Windows Server 2003

We are getting this messege atleast once a day, using Oracle database 10g R2 with Oracle Developer 6i forms, we have to restart the service and then it works fine.... DB Server has 4GB RAM
SGA 1.6 GB
PGA 800 M

Hi
It is due to lack of memory or due to more put more work on server processes so try to increase memory or decrease the number of users
Shafiulla

ORA-04030 On ORACLE 10g RAC database with two nodes as active

OS-HP-AIX 5L(5.3)----IBM
DATABASE-10.2.0.2(10G)
I am getting error "ORA-04030" while executing a query
I have already set the ulimits for oracle account to UNLIMITED
1)STACK----UNLIMITED(BOTH SOFT/HARD LIMITs)
2)DATA----UNLIMITED(BOTH SOFT/HARD LIMITs)
3)MEMORY----UNLIMITED(BOTH SOFT/HARD LIMITs)
4)TIME----UNLIMITED(BOTH SOFT/HARD LIMITs)
step 1:-When I skip the listener then query executes very fine.But when
i go through the listener the "ORA-04030" errors come.
step 2:-Then when i stop and start listener on both the nodes the all
the query works fine.
This thing happens every time the system reboots
Can anyone tell me the solution for this
and why this thing happens

Thanks for ur immediate response
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
ORA-04030: out of process memory when trying to allocate 66184 bytes (pga
heap,kco buffer)
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
sql qurry
SELECT
WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, SOC_CDE2 SOC_CDE,
DECODE(SOC_CDE2,'10','Y',NULL,'N',
NVL(( SELECT NVL(AFL_IND, 'N') FROM pty y WHERE y. IPI_BAS_NR = SOC_CDE2 AND NVL(DEL_FL,'N') = 'N'
AND ROWNUM < 2 ),'N')) AFL_IND,
pDate,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY DIRIND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR,
FNC_PTY_RESIGNED_ON_DIS_DT ( PTY_ID,
TO_DATE( DECODE(PTY_TYP_CDE,'WRTMB',
'2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'),'YYYY-MM-DD')) TF
FROM
SELECT WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, NVL(SOC_CDE2,'0') SOC_CDE2,
DECODE(PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10') pDATE,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND,
SUM(NVL(ACTV_OWN_SHR,0)) ACTV_OWN_SHR,
SUM(NVL(ACTV_COPY_SHR,0)) ACTV_COPY_SHR,
NVL( SUM(NVL(CLM_OWN_SHR,0)),0) CLM_OWN_SHR,
NVL(SUM(NVL(CLM_COPY_SHR,0)),0) CLM_COPY_SHR
FROM
SELECT B.WRK_PERF_ID, B.WRK_ID, B.PTY_NA_ID,
D.PTY_ID , D.PTY_TYP_CDE, D.PTY_ROL_TYP_CDE,
CASE
WHEN D.PTY_ROL_TYP_CDE ='W' OR D.PTY_ROL_TYP_CDE ='P'
THEN
SELECT MIN(soc_cde)
FROM MBRSH_AGR_TER A
WHERE A.pty_id = D.PTY_ID
AND A.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-
05-10' , '2004-03-10' ),'YYYY-MM-DD')
AND ( A.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-1
0' ),'YYYY-MM-DD') OR A.END_DT IS NULL)
AND A.INCL_EXCL_IND = 'I'
AND ( A.TIS_CDE = 840 OR
EXISTS (
SELECT 1
FROM CPST_TERR C
WHERE C.CHILD_TIS_CDE = 840
AND C.PARENT_TIS_CDE = A.TIS_CDE
AND NVL(C.DEL_FL, 'N') = 'N'
AND NVL(A.DEL_FL,'N') = 'N'
AND soc_cde NOT IN
SELECT soc_cde
FROM MBRSH_AGR_TER B
WHERE B.pty_id = D.PTY_ID
-- b.soc_cde = a.soc_cde
AND B.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-0
5-10' , '2004-03-10' ),'YYYY-MM-DD')
AND (B.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'
),'YYYY-MM-DD') OR B.END_DT IS NULL)
AND B.INCL_EXCL_IND = 'E'
AND NVL(B.DEL_FL,'N') = 'N'
AND ( B.TIS_CDE = 840 OR
EXISTS ( SELECT 1
FROM CPST_TERR D2
WHERE D2.CHILD_TIS_CDE = 840
AND D2.PARENT_TIS_CDE = B.TIS_CDE
AND NVL(D2.DEL_FL, 'N') = 'N'
)-- NOT IN
) --w,p end
WHEN D.PTY_TYP_CDE='SOC' THEN D.IPI_BAS_NR
END
) SOC_CDE2,
B.ENTMT_ID, B.ROL_TYP_CDE,
B.IP_STA_IND_CDE, B.UNID_ID_FST_NA, B.UNID_IP_NA, B.IP_PAY_STA, B.REASON, B.SHR_OWN_PTY_NA_ID,
A.PGM_STT_DT, D.PAY_DIR_IND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR
FROM STG_ACIP_DIST_MODE1 B, STAGING_USAGE_SELECTION_MODE1 A, PTY_NA C, PTY D
WHERE B.WRK_PERF_ID = A.WRK_PERF_ID
AND B.PTY_NA_ID = C.PTY_NA_ID
AND C.PTY_ID = D.PTY_ID
AND A.CALC_RUN_CTL_ID = 279
AND A.DIS_ID = 241
GROUP BY WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID, PTY_TYP_CDE, PTY_ROL_TYP_CDE,
SOC_CDE2, ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND
order by WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID
It is just a simple query with group by which i ran by sqlplus but it is geting more then million records.

Getting ora-04030 out of process memory using utl_http package

Hi,
Using oracle db v9 on aix. I run an extract (pl/sql package) which processes about 50,000 records. When processing gets to about record 45,500 ora 04030 error is reported when calling utl_http.get response or utl_http.read_text. Only have this problem after about 45500 records prcoessed.
Can anybody help?

donl wrote:
Hi,
Using oracle db v9 on aix. I run an extract (pl/sql package) which processes about 50,000 records. When processing gets to about record 45,500 ora 04030 error is reported when calling utl_http.get response or utl_http.read_text. Only have this problem after about 45500 records prcoessed.
Can anybody help?04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
// *Cause: Operating system process private memory was exhausted.
// *Action:
[oracle@localhost ~]$

ORA-04030: out of process memory when trying ....

Hi!
Environment: Oracle Database 10.2.0.5.0 on Windows Server 2003 SP1. Memory: 4GB Ram. /3GB and PAE not set in boot.ini
There is a job that runs at night that triggered this message. We assume that not enough OS memory was free for this
process? Any recommendations greatly appreciated. Thanks!
SGA
Total System Global Area 734003200 bytes
Fixed Size                  1305424 bytes
Variable Size             213910704 bytes
Database Buffers          511705088 bytes
Redo Buffers                7081984 bytesExcerpt of alert log:
Wed Oct 19 01:00:51 W. Europe Daylight Time 2011
Process startup failed, error stack:
Wed Oct 19 01:00:51 W. Europe Daylight Time 2011
Errors in file h:\oracle\admin\trwprod\bdump\trwprod_psp0_3392.trc:
ORA-27300: OS system dependent operation:CreateThread failed with status: 8
ORA-27301: OS failure message: Not enough storage is available to process this command.
ORA-27302: failure occurred at: ssthrddcr
Wed Oct 19 01:00:52 W. Europe Daylight Time 2011
Process m001 died, see its trace file
Wed Oct 19 01:00:52 W. Europe Daylight Time 2011
ksvcreate: Process(m001) creation failed
Wed Oct 19 02:00:07 W. Europe Daylight Time 2011
Errors in file h:\oracle\admin\trwprod\bdump\trwprod_j007_1320.trc:
ORA-12012: Fehler beim autom AusfÃ¼hren von Job 21
ORA-04030: Zu wenig Prozessspeicher fÃ¼r Versuch 123404 Bytes zuzuweisen (QERHJ hash-joi,kllcqas:kllsltba)
ORA-06512: in "WKSYS.WK_JOB", Zeile 443
ORA-04030: Zu wenig Prozessspeicher fÃ¼r Versuch 123404 Bytes zuzuweisen (QERHJ hash-joi,kllcqas:kllsltba)
ORA-06510: PL/SQL: Unbehandelte benutzerdefinierte Exception
ORA-06512: in "WKSYS.WK_JOB", Zeile 766
ORA-04030: Zu wenig Prozessspeicher fÃ¼r Versuch 123404 Bytes zuzuweisen (QERHJ hash-joi,kllcqas:kllsltba)
ORA-06512: in Zeile 1Excerpt of trace log
Wed Oct 19 02:37:09 W. Europe Daylight Time 2011
Process m000 died, see its trace file
Wed Oct 19 02:37:09 W. Europe Daylight Time 2011
ksvcreate: Process(m000) creation failed
Wed Oct 19 02:51:03 W. Europe Daylight Time 2011
Thread 1 advanced to log sequence 3210 (LGWR switch)
Current log# 3 seq# 3210 mem# 0: K:\ORACLE\ORADATA\TRWPROD\REDO03A.LOG
Current log# 3 seq# 3210 mem# 1: L:\ORACLE\ORADATA\TRWPROD\REDO03B.LOG
Wed Oct 19 07:37:00 W. Europe Daylight Time 2011
Thread 1 advanced to log sequence 3211 (LGWR switch)
Current log# 1 seq# 3211 mem# 0: K:\ORACLE\ORADATA\TRWPROD\REDO01A.LOG
Current log# 1 seq# 3211 mem# 1: L:\ORACLE\ORADATA\TRWPROD\REDO01B.LOG
======================================================
PRIVATE MEMORY USAGE FOR LARGEST PROCESS
Begin memory detail for largest PGA user, pid 37
============================
Begin PGA memory detail dump
============================
Dumping only 0 of 1 process heap scans requested
============================
End PGA memory detail dump
============================
End of memory detail for pid 37
(if there was no memory detail for pid 37, it probably timed out and
may appear in the trace file for pid 37)
Died during process startup with error 4030 (seq=155312)
OPIRIP: Uncaught error 4030. Error stack:
ORA-04030: out of process memory when trying to allocate 1636 bytes (pga heap,ldm context)

I too believe that this is a memory issue, but need to get confirmed.
Can you tell us what is the bit-version (32 or 64 bit?) of windows?
Generally when we get ora-04030 error, we have some recommendations. see this link
http://www.dba-oracle.com/t_ora_04030_out_process_memory.htm
I also faced same problem and I archived that in my blog
http://pavandba.com/2009/10/30/handling-ora-04030-ora-600723-on-32-bit-windows-machine/

11g and ORA-04030 problems

We have a new Dell server, OS Windows 2003 Server Enterprise 32bit with 32GB or RAM in it. Right now 64bit is not available to us because of Vendor issues so I can't go down that road yet. I keep running into ORA-04030 errors whether I put in the /3GB /USERVA=2560 switches or not. I got the /USERVA setting from Oracle's Best Practices for Windows Servers Guide. This new server is our current test box so we can upgrade our main application to 11g. Our current production server is running 10g and is set up the exact same way as this one using the same application, just on 10g. The only difference is that on 11g I am using Automatic Memory Management, it is at 11.1.0.6 right now. I plan to bump it up to 11.1.0.7 soon though.
The problem happens when Oracle.exe uses memory up to the limit of the Memory_target setting, then it throws the ORA-04030 error. It is like the process is reaching the Memory_target and then not using the memory it has, it is trying to grab more from the OS. I have tried setting this target lower and higher with the same results. I have also tried with and without the /3gb switch, same results. Dell hasn't offered much information, they told me to try Large Page Support.
I am at a loss, any help would be appreciated.

Thanks for the suggestions so far. This is what I got back from my vendor. It is possibly due to an unpublished Bug 7330813 that has to do with Function Based Indexes. This bug is fixed in 11.2.
-Unpublished Bug 7330813 deails
CBO may incur high hard parse times (as compared to 10g) for queries involving
Tables with functional indexes.
This Fix complements the fix for unpublished bug 6194582.
Workaround:
Set "_replace_virtual_columns"=false;
I have set the above parameter so we will see if it helps. Keep in mind that Oracle says not to use this Initialization parameter unless told to do so by Oracle Support.

All pieces crosscheck validate but when building standy - ORA-19870: error

This project is to take a backup of a database and restore it to a standby on the SAME server.
The parameters and channels are the same for both. All backups, controlfiles, and archivelog files show as crosschecked and available,
but whenever we start the restore we get the following -
channel c4: starting datafile backupset restore
channel c4: restoring control file
channel c4: reading from backup piece cntrl_0omr5dnb_1_1
ORA-19870: error reading backup piece cntrl_0omr5dnb_1_1
ORA-19507: failed to retrieve sequential file, handle="cntrl_0omr5dnb_1_1", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <cntrl_0omr5dnb_1_1>
failover to previous backup
Sorry I don't have more information.. I'm an observer for the most part.
Any ideas?

130642 wrote:
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <cntrl_0omr5dnb_1_1>By looking the very last error, your controlfile(cntrl_0omr5dnb_1_1) might be corrupted somehow which leads to a failure from media manager layer.
Did you duplexed the controlfile? If you did, then you may try use the other one to do the restore.

ORA-29516/ORA-04030

I loaded a file I/O class with methods as assignFile, openFile, readln etc. to a Oracle 8i (8.1.5) on a HP-Unix machine and defined a call specification.
During tests with large files (looping through a file of lets say 10MB or 300'000 lines/records, reading each line and storing data to a table) the session crashes!
Mostly an ORA-04030 error (SHARED_POOL_SIZE is set to 70'000'000) or an ORA-29516 ("...Aurora assertion failure: Assertion failure at joetsl.c:307 Unable to initialize thread semaphore") occures.
What could the problem be? I don't know the size of the process memory quota set, could this be too small? Or is there a problem/bug in the garbage collector? Or is there a way to force the garbage collector to free non used memory?...

Some memory settings that might help are outlined in the FAQ at: http://technet.oracle.com/products/oracle8i/htdocs/jserver_faq/index.html#_52_
...and see if that helps track it down.
Other ideas - is this all one giant transaction? If so, is it possible you are running out of rollback space in a really ugly way. Other then that, I can only suggest that you get the smallest test case to reproduce this problem and log it as a bug with support.
take care
John.
Oracle JServer Development Team
null

ORA-04030 error on backup

Similar Messages

Maybe you are looking for