Ora-07445 When tried to select a view using where clause it got disconnectd
select * from v_my_view;
plan group_name plan_id
plan_one group_one 101
1 row selected.
when I tried
select * from v_my_view where plan_id='101';
It got disconnected and show to end of communication error
Current verson of database I am working with is 10.2.0.1.0
Please help, niether i have metalink access nor I have any patch to install.
Thanks and Regards in advance,
First don't create Multiple thread I guess you created 3 thread for the same problem.
Coming back to your problem did you check your Alert log, is your server running in shared/Dedicated mode whats your OS.
Similar Messages
-
ORA-25175 when trying to create materialized view, organization index SOLV
Hi,
I'm trying to create a materialized view to compensate for non-normalized table.
I have table anormal, and mv is to be on distinct agency, company in that table.
Here goes:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
NLSRTL Version 10.2.0.3.0 - Production
SQL> create table anormal (company varchar2(8) not null
2 ,dept varchar2(8) not null
3 ,agency varchar2(8) not null
4 ,constraint anormal_pk primary key (company,dept));
Table created.
SQL> insert into anormal values('c1', 1, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 2, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 3, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 1, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 2, 'Acme');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from anormal;
COMPANY DEPT AGENCY
c1 1 Ajax
c1 2 Ajax
c1 3 Acme
c2 1 Acme
c2 2 Acme
SQL> create materialized view agency_comp_mv
2 organization index --primary key (agency, company)
3 build deferred
4 refresh on demand
5 as
6 select distinct agency, company from anormal
7 /
select distinct agency, company from anormal
ERROR at line 6:
ORA-25175: no PRIMARY KEY constraint found
SQL>The error tells me that there is no primary key, but is there any way to add such?
- or is my problem rather that I cannot use DISTINCT with organization index?
Regards
Peter
bump
Message was edited by:
Peter Gjelstrup
<SOLVED>
Message was edited by:
Peter GjelstrupThanks William,
I tried with ON PREBUILT TABLE, just to see what happens.
Building on my OP:
SQL> create table iot(agency varchar2(8) not null, company varchar2(8) not null
2 ,constraint iot_pk primary key (agency,company))
3 organization index;
Table created.
SQL> insert into iot select distinct agency, company from anormal;
4 rows created.
SQL> commit;
Commit complete.
SQL> create materialized view iot on prebuilt table
2 as
3 select distinct agency, company from anormal;
Materialized view created.
SQL> select * from iot;
AGENCY COMPANY
Acme c1
Acme c2
Ajax c1
SQL> insert into anormal values('c3', 2, 'Foo');
insert into anormal values('c3', 2, 'Foo')
1 row created
SQL> select * from anormal;
COMPANY DEPT AGENCY
c1 1 Ajax
c1 2 Ajax
c1 3 Acme
c2 1 Acme
c2 2 Acme
c3 2 Foo
6 rows selected.
SQL> select * from iot;
AGENCY COMPANY
Acme c1
Acme c2
Ajax c1
3 rows selectedNow, try to refresh and MV
SQL> alter materialized view iot refresh complete;
Materialized view altered.
SQL> select object_type, to_char(last_ddl_time, 'hh:mi:ss'), status
2 from user_objects where object_name = 'IOT';
OBJECT_TYPE DDL_TIME STATUS
TABLE 10:40:42 VALID
MATERIALIZED VIEW 10:41:13 VALID
SQL> select * from iot;
AGENCY COMPANY
Acme c1
Acme c2
Ajax c1Agency "Foo" is not in MV,
Looks like that IOT select'ed from is indeed the MV:
SQL> drop table iot;
drop table iot
ERROR at line 1:
ORA-12083: must use DROP MATERIALIZED VIEW to drop "STIK"."IOT"
SQL>So, seems that Maxim is right, it just can't be done. And it seems my options are:
Create HEAP organized MV or
Create and maintain IOT
Regards
Peter -
Getting ORA-22805 when trying to load XML file using SQLLDR
I'm trying to learn the basics of XML since we'll be getting XML files in the near future. I'm using one of the sample schemas that comes with XMLSPY. I loaded this schema into an 11g Oracle DB using XMLSPY:
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XML Spy v4.0 NT beta 1 build Jun 13 2001 (http://www.xmlspy.com) by Alexander Falk (Altova, Inc.) -->
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:ipo="http://www.altova.com/IPO" targetNamespace="http://www.altova.com/IPO" elementFormDefault="unqualified" attributeFormDefault="unqualified">
<annotation>
<documentation>
International Purchase order schema for Example.com
Copyright 2000 Example.com. All rights reserved.
</documentation>
</annotation>
<!-- include address constructs -->
<include schemaLocation="address.xsd"/>
<element name="purchaseOrder" type="ipo:PurchaseOrderType"/>
<element name="comment" type="string"/>
<complexType name="PurchaseOrderType">
<sequence>
<element name="shipTo" type="ipo:Address"/>
<element name="billTo" type="ipo:Address"/>
<element ref="ipo:comment" minOccurs="0"/>
<element name="Items" type="ipo:Items"/>
</sequence>
<attribute name="orderDate" type="date"/>
</complexType>
<complexType name="Items">
<sequence>
<element name="item" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="productName" type="string"/>
<element name="quantity">
<simpleType>
<restriction base="positiveInteger">
<maxExclusive value="100"/>
</restriction>
</simpleType>
</element>
<element name="price" type="decimal"/>
<element ref="ipo:comment" minOccurs="0"/>
<element name="shipDate" type="date" minOccurs="0"/>
</sequence>
<attribute name="partNum" type="ipo:Sku"/>
</complexType>
</element>
</sequence>
</complexType>
<simpleType name="Sku">
<restriction base="string">
<pattern value="\d{3}-[A-Z]{2}"/>
</restriction>
</simpleType>
</schema>
Then I created an XMLType table:
CREATE TABLE purchaseOrder OF XMLType
XMLSCHEMA "ipo.xsd" ELEMENT "purchaseOrder"
I'm trying to load the sample XML file ipo.xml into purchaseOrder using SQLLDR. This is ipo.xml:
<?xml version="1.0"?>
<!-- edited with XMLSPY v2004 rel. 4 U (http://www.xmlspy.com) by Mr. Nobody (Altova GmbH) -->
<ipo:purchaseOrder xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ipo="http://www.altova.com/IPO" orderDate="1999-12-01" xsi:schemaLocation="http://www.altova.com/IPO
ipo.xsd">
<shipTo export-code="1" xsi:type="ipo:EU-Address">
<ipo:name>Helen Zoe</ipo:name>
<ipo:street>47 Eden Street</ipo:street>
<ipo:city>Cambridge</ipo:city>
<ipo:postcode>126</ipo:postcode>
</shipTo>
<billTo xsi:type="ipo:US-Address">
<ipo:name>Robert Smith</ipo:name>
<ipo:street>8 Oak Avenue</ipo:street>
<ipo:city>Old Town</ipo:city>
<ipo:state>AK</ipo:state>
<ipo:zip>95819</ipo:zip>
</billTo>
<Items>
<item partNum="833-AA">
<productName>Lapis necklace</productName>
<quantity>2</quantity>
<price>99.95</price>
<ipo:comment>Need this for the holidays!</ipo:comment>
<shipDate>1999-12-05</shipDate>
</item>
<item partNum="748-OT">
<productName>Diamond heart</productName>
<quantity>1</quantity>
<price>248.90</price>
<ipo:comment>Valentine's day packaging.</ipo:comment>
<shipDate>2000-02-14</shipDate>
</item>
<item partNum="783-KL">
<productName>Uncut diamond</productName>
<quantity>7</quantity>
<price>79.90</price>
<shipDate>2000-01-07</shipDate>
</item>
<item partNum="238-KK">
<productName>Amber ring</productName>
<quantity>3</quantity>
<price>89.90</price>
<ipo:comment>With no inclusions, please.</ipo:comment>
<shipDate>2000-01-07</shipDate>
</item>
<item partNum="229-OB">
<productName>Pearl necklace</productName>
<quantity>1</quantity>
<price>4879.00</price>
<shipDate>1999-12-05</shipDate>
</item>
<item partNum="128-UL">
<productName>Jade earring</productName>
<quantity>5</quantity>
<price>179.90</price>
<shipDate>2000-02-14</shipDate>
</item>
</Items>
</ipo:purchaseOrder>
This is what's in the control file:
LOAD DATA
INFILE *
INTO TABLE purchaseOrder TRUNCATE
xmltype(xmldata)
FIELDS
xmldata LOBFILE (CONSTANT ipo.xml)
BEGINDATA
0
The load fails with:
Record 1: Rejected - Error on table PURCHASEORDER.
ORA-22805: cannot insert NULL object into object tables or nested tables
Another question I have is, how do we know how many records (0's) to specify in the control file? In this case there's only one but when real files are used we won't know how many are in the file.
Thanks for your help!The concept was "Don't use SQL*Loader to parse XML".
You can use SQL*Loader to load an entire XML document into the DB. That is fine. You can do the same via BFILENAME to read in files from disk as well.
If you want to parse XML, do that from within Oracle via PL/SQL and/or SQL. The solution depends upon your version of Oracle and what is good enough for you in terms of performance.
So the basics are
a) How am I getting the information?
b) How am I getting in into Oracle?
c) How do I want to parse it?
As I see the schema, it only allows for one ipo:purchaseOrder node in the document, since that is the root node. If you have multiple in the incoming file, you no longer have valid XML, both per the schema and because you have no single root node. You have an XML fragment, which must be treated different.
Just trying to understand the question since I now realize it does not agree with what the schema in your initial example shows. -
Got ORA error when trying to execute external file using scheduler
Hi All,
I have executed the below program. In the log i have seen the error like below
BEGIN
dbms_scheduler.create_job('"TEST_JOB_EXE2"',
job_type=>'EXECUTABLE', job_action=>
'/home/upncommon/pub/test123'
, number_of_arguments=>0,
start_date=>TO_TIMESTAMP_TZ('23-AUG-2013 05.35.27.557242000 AM -04:00','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'), repeat_interval=>
'freq = minutely;'
, end_date=>TO_TIMESTAMP_TZ('24-AUG-2013 05.35.27.000000000 AM ASIA/CALCUTTA','DD-MON-RRRR HH.MI.SSXFF AM TZR','NLS_DATE_LANGUAGE=english'),
job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>FALSE,comments=>
'Job to test use of dbms_scheduler'
dbms_scheduler.set_attribute('"TEST_JOB_EXE2"','credential_name',
'"EXECUTABLE"');
dbms_scheduler.enable('"TEST_JOB_EXE2"');
COMMIT;
END;
"EXTERNAL_LOG_ID="job_196709_23673",
ORA-27369: job of type EXECUTABLE failed with exit code: Input/output error
STANDARD_ERROR="Launching external job failed: Login executable not setuid-root""my version details are:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
"CORE 11.2.0.3.0 Production"
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production -
Error Occur when trying to select Item List
Hi Experts,
Machine gets Hang when trying to select Item List in row level PO,SO ect as well as in item master Data when Pressing Star ( * ) .
and when trying to close this window then error occur as close the program and problem occur on server itself
Test Database is working fine.
worked around
1.Restarted the machine
2.Restarted services
using SBO 9.0 PL 7
OS-Window 7 Professional
Please Find the Two Error Attachments
Please help me
Thanks & Regards
NavnathHi
Check the below thread
SAPB1 Application Hang and Not responding when i serch item in any document
With Regards
Balaji Sampath -
ORA-03113 when trying to connect to database
RDBMS Version:: 9.2.0.6
Operating System and Version:: Win2003 Small Business Server
Error Number (if applicable):: ORA-03113
Server Net Version:: 9.2.0.6
Client Operating System and Version:: Solaris10
Client Net Version:: 2.1.3
ORA-03113 when trying to connect to database
I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
Activating traces on the client-side showed the following errors:
-<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
-<ERROR>- nsopen: unable to open transport
-<ERROR>- nsprecv: transport read error
-<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
-<ERROR>- osnqrc: wanted 1 got 0, type 0
-<ERROR>- osnqper: error from osnqrc
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12537
-<ERROR>- osnqper: ns (2) err code: 12560
-<ERROR>- osnqper: nt main err code: 507
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqsm: send-break: failed to send OOB break...
-<ERROR>- osnqper: error from send-marker
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12583
-<ERROR>- osnqper: ns (2) err code: 0
-<ERROR>- osnqper: nt main err code: 0
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqbr: returning 3113
Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ? -
Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.
I've seen this duplication once or twice before - in my case it was with SmugMug.
Try removing the Facebook account from within Aperture, and then re-adding it. It should resolve the issue. -
When trying to select item from any drop down in navigation bar the menu shrinks. I seem to not be able to navigate further than 1st item on the drop down list.
However, it seems to be working in other browsers but not in Firefox.
The website affected by this behavior is in the following link: http://www.coubroughandco.com
I am wondering what could possibly be the cause of it.Hello,
I get the same issue. To make sure we are talking about the same thing I have uploaded a screenshot. See below.
When I hover over 'Buying' the menu pops up. I then move my mouse down over 'Your Budget' nothing happens. I then move the mouse down again over 'Leasehold or Freehold?' the menu disappears. It is not possible to click on the 'Leasehold or Freehold?' link.
I don't believe Firefox is at fault here. I think the website has not been properly tested to work with Firefox. I am not an expert in web design but other forum contributors here will be able to identify the piece of code in the site that is causing the problem.
I think the best thing you can do is to make contact with the business to let them know that their website navigation doesn't work for Firefox users.
I hope that helps. -
I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
Can I get your Advise on what to do? ThanksUsing FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
When trying to downlead the latest version of iTunes, I got 2 errors:
1. MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem.
Service "Apple Mobile Device" failed to start. Verify your admin ......
2. iTunes was not installed correctly. Error 7 (Windows error 126)
Please help!Do you have Windows XP Pro?
see https://discussions.apple.com/thread/5840089?tstart=0
there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
downloads>ItunesSetup.exe (right-click)>yourself as admin & UNCHECK THAT BOX!> conntinue with new installation and even find your old playlists still intact!!
This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once -
I am using photoshop cc on windows 8 all latest updates done when trying to crop photo or use clone
I am using photoshop 6cc on windows 8 all latest updates done when trying to crop photo or use clone stamp tool the photo's disappear which makes it impossible to use, photo's do comes back if I stop trying to crop or use clone tool but need to see the photo to use them
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
-
I have got error (error = -3259) when tried to restore my iphone using itunes...unable to download the iphone software. I have tried serval times but the same issue happening again and again Anyone can help with this issue?
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
-
I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.
I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.
[ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
Adobe Media Encoder was the problem for me. There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update as the only change). MCMHMPEGVideoCodec.framework seemed to be the factor.
I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too. -
Update was terminated when trying to issue print output using VL02N tcode
Hi friends,
I am getting follwing error when trying to issue print output using VL02N tcode:
Error: Update was terminated.
When seen in SM13 i saw following info for function module RV_MESSAGE_UPDATE,which was showing error:
Error Info: MC 601: Object requested is currently locked by user RAMU.
When seen in SM12,i don't find any lock by above user RAMU(which is my user id itself).
I request please give me some inputs on how to avoid this error.
Thanks & Regards
SeshagiriHi Nam,
This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
To rectify the data or else change the table and add one more unique to the primary key.
Abhishek Purwar
http://abhishek.purwar.googlepages.com -
Getting exception when trying to get taskdetails url using BPM worklist api
Getting exception when trying to get taskdetails url using BPM worklist api method :
String url = WorklistUtil.getTaskDisplayURL(
wfSvcClient,
ctx,
task,
null,
"worklist",
parameters);
Jul 21, 2011 11:24:40 AM oracle.bpel.services.common.ServicesLogger __log
WARNING: <oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean()> Exception while loading install config file in standalone Error : javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
oracle.fabric.common.FabricException: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:184)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean(TaskFlowPropsUtil.java:319)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfoForWeblogicServer(TaskFlowPropsUtil.java:491)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfo(TaskFlowPropsUtil.java:363)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getDefaultURLPrefix(WorklistUtil.java:264)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:353)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:293)
at com.test.WorflowServiceClient.main(WorflowServiceClient.java:198)
Caused by: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:662)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at oracle.as.jmx.framework.config.session.ConfigurationMBeanServerImpl.getAttribute(ConfigurationMBeanServerImpl.java:210)
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:78)
... 7 more
Caught workflow exception: null
Process exited with exit code 0.
Can anyone please help meActually i'm using Jdeveloper 11.1.1.4 and our requirement is to show list of BPM worklist tasks for the logged in user on the first page and onclick of each task task details page should be opened. I can use Webcenter PS3 worklist taskflow. But i'm not able to customize that taskflow. So, i'm going for Worklist client api.
I'm able to retrive the taskId,task title and few other details like task payload. But i don't know why the below method is giving exception.
String url =
WorklistUtil.getTaskDisplayURL(wfSvcClient,
ctx, task, null,
"worklist", parameters);
And i observed that you have also used the same code for getting Taskdetails url. And one more thing is i'm trying to access BPM worklist which is installed on remote machine.
Can you tell me what could be the reason for the exception?
Maybe you are looking for
-
Solved: Delete Using Automatic Row Processing
See Scott's reply below for the answer. Hi there, I have an application built in APEX 3.0.1 that I would like to be able to use a button to delete a single row from an underlying database table (owned by the parsing schema). My APEX page has a 3 HTML
-
Reconfigure STMS after system copy
Hello, I have 3 systems NPT, REC, PRD NPT is the controler of domain I have created on a new server AIX a new backup system which is the PRD's copy with the same system's name PRD But now i can't import on this new server i have these messages : pr
-
Does anyone know if Essbase 9 works in Windows Vista?
-
Commandbutton with f:param not working
hi, f:param working command link working succesfully. f:param not working wiith command button, can I know how to use commandbutton with f:param? Thanks, siva
-
Planning Server Requires Restart to Show Changes to Business Rules
Planning Web Services Requires stop ,and delete "server/Planning0/tmp" files in weblogic domain ,restart to Show Changes to Business Rules or New Business Rules.