ORA-1013 when trying to insert data into the table

Hi,
While inserting record into a table, we are getting the following error:
ORA-1013
01013, 00000, "user requested cancel of current operation"
I could not find any information in alert log also.
We have a bitmap index on this table. However, we never got this error till now.
Also i found that the tablespace who stores data has lot of space and tablespace which consists of the indexes is close to 90% full today ( i dont know what was the space available yesterday when there was error).
I know that information i provided might be very less, but i gave as much information as i can provide.
Can you please help me in trouble shooting this problem.
Thank you
Giridhar

Sorry. i forgot to give version information
Oracle version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
OS: SunOS 5.10
we got it only once yesterday. only for one table. not for any other tables.
Thanks aalap for your quick response.
Giridhar

Similar Messages

Exception while trying to insert data into Target Table

Hi ,
Im trying pick data from a table A which is in DB1 and trying to insert table B which is in DB2 .Below are the steps which I did.But im getting the exception
*"Caused By: java.sql.SQLSyntaxErrorException: ORA-02019: connection description for remote database not found:"* .Can some one help me with this .
Note : The DB that im using is Oracle 10g Express Edition and ODI studio is ODI 11.1.1.5.0
1.Created a two Data Server -one for each Data base (DB1 and DB2)
2.Created two Physical Schema under the respective Data Server
3.Created two Logical Schema referring respective Physical Schema
4.Created a two Models for each Logical schema and did Reverse Engineer
5.Created an Interface , imported the Knowledge models and did the mapping between the Source and Target Data Source
KM's used :
Source data store-Staging Area-LKM Oracle to Oracle (DBLink)
Target Properies-IKM Oracle Incremental Update
I unchecked Stagin Area Different from Target .
Thanks
John

Hi John,
I think you need to create public database link then create public synonym
After creating that, please check it from DB side it is working or not, then check from ODi end and go thru below URL hope this will helps you.
https://forums.oracle.com/forums/thread.jspa?threadID=530074
Thanks,
Phani

Inserting Data into nested table

I am exploring the differences between OBJECT & RECORD.
As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
CREATE OR REPLACE type sam as OBJECT
v1 NUMBER,
v2 VARCHAR2(20 CHAR)
---Nested Table---
create or replace type t_sam as table of sam;
--Inserting data----
insert into table(t_sam) values(sam(10,'Dsouza'));
Error Message:
Error starting at line 22 in command:
insert into table(t_sam) values(sam(10,'Dsouza'))
Error at Command Line:22 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
*Cause:
*Action:

Ariean wrote:
So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
Ariean wrote:
And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
It could get stupidly .. er, stupid O_0
CREATE TYPE o_myobj1 AS object ( id1   number, cdate1 date );
CREATE TYPE t_mytype1 AS table of o_myobj1;
CREATE TYPE o_myobj2 AS object ( id2   number, dumb t_mytype1 );
CREATE TYPE t_dumber AS table of o_myobj2;
O_0
Ok, my brain's starting to hurt - I hope you get the idea
Ariean wrote:
Secondly is my understanding correct about OBJECT & RECORD?
I can't think of any benefit of describing it another way.

How to insert date into a table by selecting form sysdate

Hi
My Table format is like this
SQL>desc log;
Name Null? Type
EMP_ID VARCHAR2(30)
LOGIN DATE
LOGOUT DATE
now when ever an employee logs in i w'd like to insert date into the table.
i put up the following query
SQL> insert into log(emp_id,login)
2 values
3 ('Ed_01',
4 select
5 sysdate
6 from dual
7 );
select
ERROR at line 4:
ORA-00936: missing expression
I got the above error how can i rectify that plz suggest me very urgently as i have to submit my project very early to my boss.

try this :
insert into log(emp_id,login) values ('Ed_01', sysdate);

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Can't find some albums when trying to insert photos into other programs

I am having trouble finding albums (and thus pictures) when trying to insert photos into a Word document or upload to mySpace/ facebook etc.
After choosing 'insert<picture<from file<pictures<iPhoto Library' , I have the option of looking into the year-month-date or by album. Since I have a better memory of the 50+ albums I have created rather than their dates, I choose "Albums". This list only contains about half of my albums (with folder icons) and it appears outdated...ie one of the albums no longer exists in iPhoto and has been changed to a folders with several albums in it.
I'm wondering why this is happening or how i can update the album list. I realize i could use the year-month-day thing but that is too frustrating.
Carey
iBook G4 Mac OS X (10.4.3)
iBook G4 Mac OS X (10.4.3)

Hi chantreya,
iPhoto 5 now stores the Album information in a data xml file. The Albums folder within the iPhoto Library folder is no longer used. At some point, usually after a rebuild, you will no longer have that folder in the Finder.
If you need to access photos from an album it is very difficult for a third party application to navigate the iPhoto Library in order to find the photo you need. You will have to know the date of import in order to find the photo.
There are some third party applications that can read the xml file and can navigate the iPhoto library and show you the Albums. Hopefully more applications will be revised to read this file.
Until then you will have to Share/Export the photos to the desktop. You can then navigate to the desktop to use the photos (example: web uploading from online photo site)
If your application supports drag and drop, you can drag the photo from an open iPhoto Library window into your application.
For email you can also use the email icon within iPhoto to open a message with the highlighted photo attached.
You can also use spotlight to find images in an Album...
This is what I have done using Spotlight to find my images that are in iPhoto albums without opening iPhoto..
In iPhoto, select the album, then select all, go to Photos/batch change.
Change the comments to text. In the text field I put the name of the Album.
Do this for each album.
Close iPhoto.
Open Spotlight and put in the name of the Album ( you have to remember the names of the albums or have then written down)
In the spotlight search results. click on "show all"
Under "Images" click on the "xx more" to show all the images in the album.
Make sure you have it in icon view, the icon view box is the last one on the blue images line.
Now you can control click on the image to "reveal in finder", open in iPhoto or Mail, etc.
I am not sure if this is going to make you happy and it is a little more work, but you can find images in albums and even view them in a slideshow (by clicking the play arrow at the end of the Images highlighted blue line) using Spotlight, all without opening iPhoto.
One important thing to know is you can set up a graphic program to be an external editor (when you double click an image in the library} such as PhotoShop or PS Elements. You set up that within iPhoto Preferences. Just make sure you save the image flattened and with the same name. The edits will then be relected in iPhoto when you hit "save".
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
Lori

Receiving ora-01461 when trying to insert

Hello,
       I have a form with multiple rows of data, i wrote a loop statement that inserts data into another table. When i test the statement from SQL prompt, everything works with no problems. however, when i added to the save button, i am receiving the Ora-01461 error. why is that? the description from what i find doesn't seem to fit with what i'm doing. any thoughts? I'm using Oracle Forms 10g and writing to an 11g database.
thank you,
steven

commit_form; --commit the form first so that any changes will be applied to the database, prior to being copied over to destination table.
declare
     cursor c_bullet is
          select SL_3_BULLET_NBR, SL_3_PREFACE_BULLET, SL_3_PREFACE_DATE_INPUT, SL_3_SUB_CAT_NBR
          from PARKER.SL_3_PREFACE_DEFAULTS;
v_bullet_nbr      PARKER.TEMP_PREFACE_BULLET.SL_3_BULLET_NBR%TYPE;
v_bullet              PARKER.TEMP_PREFACE_BULLET.SL_3_BULLET%TYPE;
v_date_input     PARKER.TEMP_PREFACE_BULLET.SL_3_DATE_INPUT%TYPE;
v_sub_cat          PARKER.TEMP_PREFACE_BULLET.SL_3_SUB_CAT_NBR%TYPE;
v_sl3_idn           PARKER.TEMP_PREFACE_BULLET.SL_3_IDN%TYPE;
error_msg varchar2(300);
begin
     v_sl3_idn := 'SL-3-11653A' -- for testing purposes, will be filled from a global variable that the user inputs.
open c_bullet;
loop
fetch c_bullet into v_bullet_nbr, v_bullet, v_date_input, v_sub_cat;
exit when c_bullet%notfound;
if (v_bullet_nbr <= 30) then
     insert into PARKER.TEMP_PREFACE_BULLET (sl_3_preface_bullet, sl_3_preface_date_input, sl_3_bullet_nbr, sl_3_sub_cat_nbr)
     values (v_bullet, v_date_input, v_bullet_nbr, v_sub_cat);
end if;
commit;
end loop;
close c_bullet;
end;

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Insert data into linked table

Problem when you try to insert data into linked table.
I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
"Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
Error Unable to process update.
Is it bug too?

Hi,
Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
The following book contains an excellent introduction to this topic.
"Oracle PL/SQL for Dummies"
written by Rosenblum and Dorsey
published by Wiley Publishing Inc.
The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
"Oracle PL/SQL programming
written by Steven Feuerstein
published by O'Reilly
Hope this helps.
Cheers,
Patrick Cimolini

Problem in inserting data into MySQL table

Hi All,
I have a table with just two fields FIRSTNAME and SECONDNAME in MySQL. I am accepting the First Name and Second Name in two text fields and then trying to insert them into the MySQL table. I have set the concurrency of the rowset to CONCUR_UPDATABLE and am using the code clip for Database row insert with the appropriate changes. When I run the application it doesnt give me any errors but the data is also not inserted in the table. Can someone pls help me out.
Loneliness wins the race :-)

This is my problem when inserting single row. What does it means ?
MusicInsert: com.mysql.jdbc.NotUpdatable: Result Set not updatable.This result set must come from a statement that was created with a result set type of ResultSet.CONCUR_UPDATABLE, the query must select only one table, and must select all primary keys from that table. See the JDBC 2.1 API Specification, section 5.6 for more details

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

Insert data into the xml schema-based xmltype table problem!

Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
     
     <xs:simpleType name="RoutingType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Synch"/>
               <xs:enumeration value="Asynch"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="StatusType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACTIVE"/>
               <xs:enumeration value="VOID"/>
               <xs:enumeration value="PENDING"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="SenderApplicationType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PR"/>
               <xs:enumeration value="CR"/>
               <xs:enumeration value="POS"/>
               <xs:enumeration value="CPP"/>
               <xs:enumeration value="Other"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ServiceTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IS"/>
               <xs:enumeration value="WS"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RouteDirect">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Request"/>
               <xs:enumeration value="Reply"/>
               <xs:enumeration value="None"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="Indicator">
          <xs:annotation>
               <xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
          </xs:annotation>
          <xs:restriction base="xs:string">
               <xs:enumeration value="YES"/>
               <xs:enumeration value="NO"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RuleType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ControlAct"/>
               <xs:enumeration value="WSPolicy"/>
               <xs:enumeration value="AccessControl"/>
               <xs:enumeration value="Certification"/>
               <xs:enumeration value="MessageConformance"/>
               <xs:enumeration value="Variant"/>
               <xs:enumeration value="Routing"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="HL7Result">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACCEPT"/>
               <xs:enumeration value="REFUSE"/>
               <xs:enumeration value="REJECT"/>
               <xs:enumeration value="ACK"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="IIPType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PUT"/>
               <xs:enumeration value="GET/LIST"/>
               <xs:enumeration value="NOTIF"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ProfileTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IIPProfile"/>
               <xs:enumeration value="BizOperationProfile"/>
               <xs:enumeration value="OrchestrationProfile"/>
               <xs:enumeration value="DomainObjectProfile"/>
               <xs:enumeration value="ServiceProfile"/>
               <xs:enumeration value="ExceptionProfile"/>
               <xs:enumeration value="CustomizedProfile"/>
               <xs:enumeration value="SystemProfile"/>
               <xs:enumeration value="HL7XMLSchemaProfile"/>
               <xs:enumeration value="EnricherParametersProfile"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ParameterType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="String"/>
               <xs:enumeration value="Object"/>
               <xs:enumeration value="Number"/>
               <xs:enumeration value="Document"/>
          </xs:restriction>
     </xs:simpleType>
     
     
     
     <xs:complexType name="ProfileType">
          <xs:annotation>
               <xs:documentation>
          1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
          2.ProfileID used to uniquely identify the current profile
          3.ProfileData used to hold all the necessary profile related data
          </xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="ProfileID" type="ProfileIDType">
                    <xs:annotation>
                         <xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ProfileData" type="ProfileDataType">
                    <xs:annotation>
                         <xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="ProfileIDType">
          <xs:annotation>
               <xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
          </xs:annotation>
          <xs:attribute name="ID" type="xs:ID" use="required">
               <xs:annotation>
                    <xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Name"/>
          <xs:attribute name="Description"/>
          <xs:attribute name="Version">
               <xs:annotation>
                    <xs:documentation>version of the profile data</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Type" type="ProfileTypeType" use="required">
               <xs:annotation>
                    <xs:documentation>value to identify the ProfileType type within
                    IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
                    ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
                    EnricherParametersProfile,CustomizedProfile
                    </xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Status" type="StatusType" default="ACTIVE">
               <xs:annotation>
                    <xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          
     </xs:complexType>
     <xs:complexType name="ProfileDataType">
          <xs:annotation>
               <xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
          </xs:annotation>
          <xs:choice>
               <xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
                    <xs:annotation>
                         <xs:documentation>Enricher Parameters related profile data
               1. one instance of this type may contains all the related System metadata.
               2. idType part may use to identify different version/release/status
               </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ExtendProfileData" type="ExtendProfileDataType">
                    <xs:annotation>
                         <xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="ExtendProfileDataType">
          <xs:sequence>
               <xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParametersDataType">
          <xs:sequence>
               <xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParameter">
          <xs:sequence>
               <xs:element ref="Enricher"/>
          </xs:sequence>
          <xs:attribute name="serviceName" type="xs:string" use="required"/>
          <xs:attribute name="interactionID" type="xs:string"/>
     </xs:complexType>
     <xs:element name="Enricher">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Parameters" type="Parameters"/>
                    <xs:element ref="Section" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="ValueType">
          <xs:attribute name="field" use="required"/>
          <xs:attribute name="value"/>
          <xs:attribute name="action"/>
     </xs:complexType>
     <xs:element name="Section">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
               </xs:sequence>
               <xs:attribute name="path" use="required"/>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="Parameters">
          <xs:sequence>
               <xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:attribute name="name" use="required"/>
                         <xs:attribute name="reference"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleList">
          <xs:annotation>
               <xs:documentation>an array of rules</xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleProfile">
          <xs:attribute name="RName" use="required"/>
          <xs:attribute name="RType" type="RuleType" use="required"/>
          <xs:attribute name="Status" default="ON">
               <xs:annotation>
                    <xs:documentation>By default is ON (or if is missing)</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Order"/>
          <xs:attribute name="Direction" type="RouteDirect">
               <xs:annotation>
                    <xs:documentation>Request / Reply</xs:documentation>
               </xs:annotation>
          </xs:attribute>
     </xs:complexType>
     
     
     
     <xs:element name="Profile" type="ProfileType">
          <xs:annotation>
               <xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
          </xs:annotation>
     </xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>

<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
     <ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
     <ProfileData>
          <EnricherParametersProfileData>
               <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="PROCESSING_CODE">
                              <Value field="value" value="T"/>
                         </Section>
                         
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="RECEIVER_NETWORK_ADDRESS">
                              <Value field="value" value="prsunew.moh.hnet.bc.ca"/>
                         </Section>
                         <Section path="RECEIVER_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">

<Enricher>
     <Parameters>
          <Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
     </Parameters>
     <Section path="HEADER">
          <Section path="HL7_STANDARD_VERSION">
               <Value field="value" value="V3PR2"/>
          </Section>
          
          
          <Section path="PROCESSING_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="PROCESSING_MODE_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
               <Value field="value" value="NE"/>
          </Section>
          
          
          <Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
               <Value field="extension" value="SIT1"/>
          </Section>
          
          <Section path="RECEIVER_APPLICATION_NAME[0]">
               <Value field="value" value="receiverAppName"/>
          </Section>
          
          
          <Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
               <Value field="extension" value="receiverOrgId"/>
          </Section>
          <Section path="SENDING_APPLICATION_NAME[0]">
               <Value field="value" value="NLPRSCLNT"/>
          </Section>
          
          
          <Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="3001"/>
          </Section>
          <Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="HIAL_USR"/>
          </Section>
     </Section>
     <Section path="PAYLOAD">
          
          
          <Section path="AUDIT[0]/AUDIT_INFORMATION">
               <Value field="code" value="LATEST"/>
               <Value field="codeSystem" value="PRSAuditParameters"/>
          </Section>
          
          <Section path="CONFIDENCE/CONFIDENCE_VALUE">
               <Value field="value" value="100"/>
          </Section>
          
          <Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
               <Value field="value" value="false"/>
          </Section>
          
          <Section path="JURISDICTION/JURISDICTION_TYPE">
               <Value field="value" value="NL"/>
          </Section>
          
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
               <Value field="code" value="GRS_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
               <Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
               <Value field="code" value="GRS_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
               <Value field="code" value="GRS_ORGANIZATION_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
               <Value field="code" value="GRS_PERSONAL_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
               <Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
               <Value field="code" value="GRS_TELEPHONE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
               <Value field="code" value="PRS_CONDITION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
               <Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
               <Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
               <Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
               <Value field="code" value="PRS_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
               <Value field="code" value="PRS_NOTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
               <Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
               <Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
               <Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
               <Value field="code" value="PRS_STATUS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
               <Value field="code" value="PRS_WORK_LOCATION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
               <Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
               <Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
               <Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
               <Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
               <Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
          </Section>
          
          <Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
               <Value field="value" value="LIC"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
               <Value field="code" value="PrincipalPerson.name.value.family"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
               <Value field="value" value="A"/>
          </Section>
     </Section>
</Enricher>
     </EnricherParameter>
          </EnricherParametersProfileData>
     </ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?

Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation?

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

Insert data into multiple tables

Hi all,
I've a requirement where i need to insert data into multiple tables using PL/SQL procedure
Procedure should have two parameters
1. Table Name (parameter1)
2. Data (parameter2)
Based on these two parameters i need to insert data into table (parameter1) using data (parameter2)
ex:
Procedure insert_data (p_table IN VARCHAR2
,p_data IN -- what should be the datatype?
IS
l_statement VARCHAR2(2000);
BEGIN
-- insert data into tables
INSERT INTO p_table
values (....);
END insert_data;Thanks in advance!!

BEDE wrote:
Amen to that!
So, I believe a better approach would be the following...
Suppose you have N datafiles with the same structure, and you wish to insert into the database the data from all those files.
For that, you should have a single table, named, say incoming_file_data, which should be structured more or less like below:
create table incoming_file_data (
filename varchar2(250) not null -- name of the file inserted from
,file_time timestamp -- timestamp when the data was inserted
,... -- the columns of meaningful data contained in the lines of those files
);And you will insert the data from all those files in this table, having normally one transaction for each file processed, for otherwise, when shit happens, some file may only get to be partially inserted into the table...
Maybe one good approach would be to create dynamically an external table for the file to be loaded, and then execute dynamically insert select into the table I said, so that you will have only one insert select for one file instead of using utl_file... RTM on that.If the file structures are the same, and it's just the filename that's changing, I would have a single external table definition, and use the alter table ... location ... statement (through execute immediate) to change the filename(s) as appropriate before querying the data. Of course that's not scalable if there are multiple users intenting to use this, but generally when we talk about importing multiple files, it's a one-user/one-off/once-a-day type of scenario, so multi-user isn't a consideration.

Insert data into fact table from source database tables

here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?

I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

ORA-1013 when trying to insert data into the table

Similar Messages

Maybe you are looking for