ORA-19870 ORA-19502 ORA-27072 RMAN

ORA-19870: error reading backup piece......
ORA-19502 write error on file blah/blah/blah/datafile, blockno 5361 (blocksize=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 9: Bad file descriptor
Additional information: 4
Additional information: 5361
Additional information: 69632
....it started out fine, did about 9 datafiles and then the rest of them started failing with the above string.
Any ideas on what the scoop is?
thanks!

Linux-x86_64 Error: 9: Bad file descriptor
Additional information: 4OS error; not Oracle.
post results from following as in below
df -h
bcm@bcm-laptop:~$ df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/sda1             108G   17G   86G 17% /
udev                  497M 256K 497M   1% /dev
none                  497M 856K 496M   1% /dev/shm
none                  497M   80K 497M   1% /var/run
none                  497M     0 497M   0% /var/lock
none                  497M     0 497M   0% /lib/init/rw

Similar Messages

RMAN ORA-19870: error reading backup piece 'location'

Hi All ,
I have run a restore from a RMAN backup and i got this error :
ORA-19870: error reading backup piece XX_df_23_11_2011_XXX_1_1.rman
ORA-19599: block number 616206 is corrupt in backup piece XX_df_23_11_2011_XXX_1_1.rmanThough the RMAN backup is still going on , it has not errored out, How can i find what all gets missing from the Source database , as in what all is present in the missing block ?
What is the use of MAXCORRUPT parameter ? can that be used here ? can this be prevented if i use maxcorrupt =1 and then run the restore ?
Also , Is there any way in which i can verify that all the backups are perfect before i drop my earlier database and run the restore. I think its the validate command but I am not sure, hence seek expert suggestion.
Please suggest
Thanks
Kk
Edited by: Kk on Dec 1, 2011 3:04 AM

RMAN backup Fails with ORA-19599,ORA-19600 and ORA-19601 [ID 779386.1]

RMAN 恢复至ASM DISKGROUP 报错 ORA 19870 19504 15045 17502 15081

问题简单描述：
AIX 6, ORACLE 11.2
1.替换原来存储，也就是说用新存储B 把原来的A 存储替换掉，数据库原来是跑到A 存储上的。
2.我把数据库shutdown 然后 startup mount 后做一致备份到本地磁盘/oracle/rman_bak1201/
3.删除原来的ASM DISKGROUP ，然后删除磁盘（踢掉旧存储）
4.新存储映射磁盘到主机，然后重新建立ASM DISKGROUP DATA 成功（原来的DISKGROUP 名字也是 DATA, 所以新diskgroup_name 与旧 diskgroup_name 相同。曾尝试建立数据库test 成功，查看diskgroup 状态为mounted 也正常）
存储替换完毕
5.把先前的备份尝试恢复到新建的 ASM DISKGROUP DATA
6.用startup nomount pfile='/oracle/rman_bak1201/abc.ora' 启动，尝试恢复时报错（pfile 是我从原库 create pfile='xxxx' from spfile 备份的）
RMAN> restore controlfile from '/oracle/rman_bak1201/c_0jnrov15_1_1';
Starting restore at 01-DEC-12
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
RMAN-00571: ========================================================
RMAN-00569: ==========ERROR MESSAGE STACK FOLLOWS===================
RMAN-00571: ========================================================
RMAN-03002: failure of restore command at 12/01/2012 17:50:54
ORA-19870: error while restoring backup piece /oracle/rman_bak1201/c_0jnrov15_1_1
ORA-19504: failed to create file "+DATA"
ORA-15045: ASM file name '+DATA' is not in reference form
ORA-17502: ksfdcre:5 Failed to create file +DATA
ORA-15081: failed to submit an I/O operation to a disk
网上搜了下说是rhdisk权限问题, 但我新的diskgroup 用DBCA 建库都正常，所以不解，请支招谢谢。

问题解决，诊断思路是tail -f alert*.log，然后从新尝试restore controlfile 发现有关于/dev/rhdisk* permission deny ，故问题就是rhdisk* 权限的问题，修改权限后重启+ASM 实例后顺利恢复。
后来我把rhdisk* 权限改成了 666 oracle dba 重启就好了（在此说明当初实施的人规划的grid和oracle用户同时属于oinstall 和dba组，两个用户其实是相同的权限，看样子比较混乱，我也没心思从头整理了简单666 解决）
但现在还有个疑问就是：
1. 为什么我设置跟人家原来的授权 crw-rw---- grid dba rhidk2 却不能恢复？但是通过dbca 用oracle 用户建立新库一点问题都没有。

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

ORA-19505: failed to identify file - RMAN in creating standby DR database.

I got this error when creating standby database at remote target server.
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
Here is what I did:
1.   started the listener and created corresponding tnsnames entry at remote standyb server
2. startup nomount to the standby database at remote server for an empty instance (instance name dxp1p).
3. All rman backups are in the /backup mount point at primary and the mount point is shared on the remote server as nfs.   So, whatever have in the backup we should be able to see and read from the remote as well.
4. Run the following at primary rman:
sql 'alter system archive log current';
backup current controlfile for standby;
sql 'alter system archive log current';
crosscheck backup;
crosscheck archivelog all;
exit
5.   Start the rman command from primary after connected to the standby server, as the primary DB uses ASM and the standby DB uses file system for the database files:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
========================================================================
But I got this error from the rman log:
contents of Memory Script:
   set until scn 12245784375453;
   restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 04-DEC-13
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_20131204_833310136_464"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-00
channel aux1: ORA-19504: failed to create file "/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
ORA-19600: input file is control file (/u01/dxp1p/control/control01.ctl)
ORA-19601: output file is control file (/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl)
Finished restore at 04-DEC-13
contents of Memory Script:
   sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/04/2013 19:06:13
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 12/04/2013 19:06:13
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
ORA-00205: error in identifying control file, check alert log for more info
=========================================
Not sure why, can somebody help?   Appreciated!

I used company regular script to login to standby instance as sys user from primary DB RMAN as oracle OS user and sys DB user.   We normally run this way for years.
Like this:
$ORACLE_HOME/bin/rman target=/ auxiliary 'sys/sys0rapr321!'@dxp1p_s11 CMDFILE=${HOME}/dba/scripts/rman_cr_dr.cmd
rman_cr_dr.cmd:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
exit
==========================
Oinstall is a group.   I am not sure to use oinstall as a user?

ORA-19870: error reading backup piece

Hi ,
The RMAN Image backup failes with the error
channel ORA_DISK_1: reading from backup piece /backups/RMAN/mkkl1143_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2009 16:33:53
ORA-19870: error reading backup piece /backups/RMAN/mjkl1143_1_1
ORA-19625: error identifying file /backups/RMAN/data_DR-PROD_I-987881832_TS-APPS_TS_TX_IDX_FNO-526_dgkhaqgn
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
I have catalog the backpeince and resync the database and triggered the backup again,but still the same issue
Can anyone throw some light
Regards,
Hussain

I believe that RMAN literally cannot either 1) find the file or 2) access the file due to permissions on the backup file piece or the RMAN directory above it.
Cheers!
Jay Caviness
http://www.grumpy-dba.com

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

Installing 10g R2 on WinXP SP2 NL gives ORA-19870, ORA-19612, ORA-06512...

I'm trying to install version 10g R2 on the following configuration:
ASUS K8V SE board + AMD 64 Athlon + 512Mb Ram + 160GB SATA HD + 18GB IDE HD Windows XP SP2 NL
When I install 10g without creating the db then it installs without problem.
If I try to create the db (afterwards or during install) I get the following errors:
(Translated from Dutch to English)
ORA-19870: Error by reading backup part C:\ORACLE\DB10G2\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB
ORA-19612: Data file 3 is not fixed because of missing or corrupt data.
ORA-06512: IN "SYS.X$DBMS_BACKUP_RESTORE", line 5149
ORA-06512: IN LINE 16
I get the option to ( Ignore ) or ( Abort )
Ignoring brings other simular problem and at the end I dont have a database.
The files are on the HD and are readable, even installed from a second download gives the same errors.
I have tryed several things even disable BitDefender 9 internet security but nothing helps.
Can someone give me some hints ?
Thanks in advance

Hi damorgan,
Thank for your reply. I try what you say at the first time but it's failed because of missing file. If it is successfully installed for you, I will try it.
For me I ignore the database config process and end installation. After that I create successfully my database by orace configuration and migration tools > database config.
Regards.
Edited by: dialaya on 27 avr. 2010 14:58

ORA-19502, ORA-27601, async_io fails

I have posted the following on the Linux forum as well. After reading posts on this forum please note we are not running out of disk space and permissions are ok. We have other servers identically configured with no errors. One hypothesis is that it may have to do with Netbackup 6 client being installed. Our normal configuration is with disk_asynch_io=true and filesystemio_options=setall. We have temporarily set these 2 params to false and none to see if this intermittent problem stops.
We have encountered the disk I/O errors noted elsewhere and in Metalink 395350.1 but are not using
Veritas and do not want to set disk_asynch_io=false and filesystemio_options=none. We are using ASM with
a corporate SAN, Oracle oracleasm libraries but the problem occurs only at the local RAID which is Linux ext2
filesystem not ASM.
Linux Redhat version is 2.6.18-92.e15xen x86-64
Oracle version 10.2.0.4.0
Server is Dell R900
Any help would be appreciated.
Peter

Can you post the error message?
I guess the error ORA-27601 is incorrect. I see the following Metalink note 396057.1- ORA-19502 ORA-27061 Warning:Oracle Process Running Out Of Os Kernel I/O Resources.
its a Bug 5609038.
Edited by: Anantha on Dec 30, 2008 10:30 AM
Edited by: Anantha on Dec 30, 2008 10:31 AM

All pieces crosscheck validate but when building standy - ORA-19870: error

This project is to take a backup of a database and restore it to a standby on the SAME server.
The parameters and channels are the same for both. All backups, controlfiles, and archivelog files show as crosschecked and available,
but whenever we start the restore we get the following -
channel c4: starting datafile backupset restore
channel c4: restoring control file
channel c4: reading from backup piece cntrl_0omr5dnb_1_1
ORA-19870: error reading backup piece cntrl_0omr5dnb_1_1
ORA-19507: failed to retrieve sequential file, handle="cntrl_0omr5dnb_1_1", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <cntrl_0omr5dnb_1_1>
failover to previous backup
Sorry I don't have more information.. I'm an observer for the most part.
Any ideas?

130642 wrote:
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <cntrl_0omr5dnb_1_1>By looking the very last error, your controlfile(cntrl_0omr5dnb_1_1) might be corrupted somehow which leads to a failure from media manager layer.
Did you duplexed the controlfile? If you did, then you may try use the other one to do the restore.

Ora-19870 error reading backup piece during installation

Hi,
I am trying to install oracle10g database on windows.
i am installing database software and database together and i keep getting this error half way throu installation.
"ora-19870 error reading backup piece during installation"
how can i solve this.
Can someone help me please.
Thanks,
Philip.

Hi,
sorry man. i still have that problem.
i could not find any solutions so far.
if i find any i will let you know.
but for now i have decided to install in another PC.
Philip.

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

IR: ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier

Hi everyone,
has anyone else had this error which has been driving me round the bend during the last three days?
I have an interactive report which used to work fine.
Now it happens (when the page loads/a filter is en- or disabled) that - from time to time, but unpredictable - I receive
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
The report is based on a table function.
I will try to set up a testcase and post the link here, but so far I haven't managed to force the error to occur.
But maybe someone else has already bumped into this kind of error? I would be grateful for any hints!
Best regards,
Sabine
Application Express 4.1.0.00.32
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

Hi Jari,
I changed the type definition (the return type of the table function) and extended the select list in the source of the IR.
I do not use 'select *' but reference every column explicitly. So APEX easked me whether to add the new column.
I also tried deleting in recreating the region, but no luck.
Any more ideas?
Best regards,
Sabine

ORA-20006: ORA-01722: invalid number ORA-06512: at "APPS.WF_NOTIFICATION"

Hi,
I am having a wft program, which checks a function activity and depending on the value returned sends difference notifications.
The package body completed successfully from backend and while running the workflow program it sends a notification also. But while opening the notification it gives the following error,
ORA-20006: ORA-01722: invalid number ORA-06512: at "APPS.WF_NOTIFICATION", line 5328 ORA-06512: at line 5
I have 3 procedures in my package body and all the 3 procedures have exceptions defined as follows, if they are using any workflow activities.
==========================================================
EXCEPTION
     WHEN OTHERS THEN
          WF_CORE.context (
          'WFCustCheck',
          'MisCustDataFromTableDoc',
          document_id,
          display_type,
          document,
          document_type,
          SQLERRM
RAISE_APPLICATION_ERROR (-20006, SQLERRM);
==========================================================
But I am not able to figure out what is causing this error. What does this "line 5328 ORA-06512: at line 5" in the error message indicate?. My package body has only 600 lines. And why is the error message not displaying the procedure name? though I have defined the procedure name in the exception.
What is the best way to get the procedure name in the error message? So that it becomes easier for identifying which procedure is causing the erro?
Please let me know.
Thanks

Hi,
Instead of the RAISE_APPLICATION_ERROR command, just replace that with RAISE;
The error is coming out of the package that is sending the notification (WF_NOTIFICATION), which is invoked when you open the notification. I'm guessing that line 5 is the line in your code though.
Are you using documents to send the notification, or are they purely defined in the .wft file?
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com
NEW! - WorkflowFAQ Blog at http://thoughts.workflowfaq.com

ORA-19870 ORA-19502 ORA-27072 RMAN

Similar Messages

Maybe you are looking for