ORA-20001: error 29th ORA-24344 When creating a workspace

Hi,
I just installed APEX 4.0 on 10g (10.2.0.4).
When I tried to create a new workspace, at the last step (after clicking "Create Workspace" button), it fails with the following error.
ORA-20001: error 29th ORA-24344: success with compilation error
Error provisioning test.
I could not find any errors in PLSQL debug error, and in DBA_ERRORS table.
Could you help me to fix this problem? I ran utlrp.sql to make sure we don't have invalid objects. And I read the installation log and found no errors. XDB, OWA installed.
I have another APEX 4.0 instance on 11g R2, and it works fine.
Thanks
Jung
Edited by: jwryoo on Jul 15, 2010 8:37 AM

thanks.
Yes, that's I already checked and confirmed that the privilege is granted.
DBA_ERRORS did not show any errors owned by APEX% users.
But I did see some errors owned by XDB.
PL/SQL: Item ignored
PLS-00201: identifier 'UTL_FILE' must be declared
PL/SQL: Statement ignored
PLS-00201: identifier 'DBMS_LOB' must be declared
It seems the DB has revoked some public access for security reasons.
So, I am trying to ask DBA to grant the privileges to XDB.

Similar Messages

ORA-24344 when creating new workspace

I am using HTMLDB 2.0 and successfully created several workspaces several months ago. I am now trying to create a new workspace and I get "ORA-24344: success with compilation error. Error provisioning <workspace>." I receive the same error whether I am reusing an existing schema or not. I have made sure there are no invalid views or procedures in the flows_020000 schema and have run ...\rdbms\admin\utlrp.sql just in case. When an existing schema is not reused, the new user does not appear to have been created. My database is 10.2.0.1 and I am running on a Windows Server 2003 system. Does anyone have any ideas?
Thanks,
Bob

Just to recap, when you re-use an existing schema, you get the error but the workspace gets created, you can login to the workspace, everything works? But when you specify a new schema you get the error but the workspace is/is not created (?) and the schema is definitely not created?
Scott

ORA-20001 error when creating Tabular Form or Form and Report

Whenever I try and add a Tabular Form or Form and Report to my application i am getting the following error at the end of the Wizard.
ORA-20001: Unable to create updateable report. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (APEX_030200.WWV_FLOW_SHORTCUT_IDX1) violatedIt's not a problem I have seen when building other apps and clearly I have managed to corrupt this application somehow.
I have loaded the problem onto apex.oracle.com for those that have access. The application number is 20325.
Any help would be very much appreciated.
Cheers Shunt

Thanks! Never thought of that.
--Andy

ORA-20001 Error when creating a new application

Hi,
I am trying to create a new application of an existing table in the database and I get the following error. The application is created using the wizard (app type Database, from scratch, Report and Form page)
ORA-20001: Unable to create modules. ORA-20001: Create pages error. ORA-20001: Unable to create form page. ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" has same name as existing application-level item. ORA-0000: normal, successful completion
The table I am creating the app on is defined like this:
CREATE TABLE "TABLE_1"
   (    "ID" NUMBER,
        "SESSION_EXTERNAL_PAPER" VARCHAR2(30),
        "OWNER_CFP_SUBMITTER1_FULL_NA" VARCHAR2(255),
        "OWNER_CFP_SUBMITTER1_COMPANY" VARCHAR2(255),
        "STATUS" VARCHAR2(30),
        "SESSION_ID" NUMBER,
        "TITLE" VARCHAR2(255),
        "ABSTRACT" VARCHAR2(4000),
        "SESSION_TYPE" VARCHAR2(30),
        "SESSION_CATEGORY" VARCHAR2(30),
        "STREAM" VARCHAR2(30),
        "PRIMARY_TRACK" VARCHAR2(255),
        "OPTIONAL_TRACK" VARCHAR2(255),
        "CROSS_STREAM_TRACK" VARCHAR2(30),
        "SUPPORTING_VIDEO" VARCHAR2(4000),
        "ATTENDEE_ROLE" VARCHAR2(255),
        "TO_RATING" VARCHAR2(30),
        "TO_COMMENTS" VARCHAR2(4000),
        "COMMENTS" VARCHAR2(4000),
        "ORACLE_PARTNERNETWORK" VARCHAR2(30),
        "IS_YOUR_OPN_MEMBERSHIP_UNDER_A" VARCHAR2(255),
        "ORACLE_PARTNER_TYPE" VARCHAR2(255),
        "OPN_MEMBERSHIP_LEVEL" VARCHAR2(30),
        "ORACLE_REGION_BASED" VARCHAR2(30),
        "ORACLE_VALIDATED_INTEGRATION" VARCHAR2(30),
        "HAS_YOUR_COMPANY_ACHIEVED_SPEC" VARCHAR2(4000),
        "PLEASE_DESCRIBE_THE_VALUE_OF_O" VARCHAR2(4000),
        "INCLUDE_CASE_STUDY" VARCHAR2(30),
        "PROVIDE_NAME_OF_THE_CUSTOMER_F" VARCHAR2(255),
        "PLEASE_PROVIDE_A_BRIEF_DESCRIP" VARCHAR2(4000),
        "NON_ORACLE_EMPLOYEE_SPEAKER1_F" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER1_C" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER1_FULL" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER1_COMPA" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER2_F" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER2_C" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER2_FULL" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER2_COMPA" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER3_F" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER3_C" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER3_FULL" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER3_COMPA" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER4_F" VARCHAR2(255),
        "NON_ORACLE_EMPLOYEE_SPEAKER4_C" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER4_FULL" VARCHAR2(255),
        "ORACLE_EMPLOYEE_SPEAKER4_COMPA" VARCHAR2(255),
        "CREATED" DATE,
        "CREATED_BY" VARCHAR2(50),
        "LAST_UPDATE" DATE,
        "LAST_UPDATED_BY" VARCHAR2(50),
         CONSTRAINT "OOW_PAPER_PK" PRIMARY KEY ("ID") ENABLE
   ) ;I am using APEX version 4.0.2.00.07
Any idea what could be wrong and what can be done to resolve the problem?
Cheers,
Andy

Thanks! Never thought of that.
--Andy

Problem with APEX 4.0 - "ORA-20001: Error with: GRANT CREATE CLUSTER "

I have a workspace which I've succesfully created with schema A.
However when i try to assign an additional schema to it, schema B, I get the following error message :-
"ORA-20001: Error with: GRANT CREATE CLUSTER TO "BI_SOURCES" ORA-01031: insufficient privileges"
i've tried granting "create cluster with admin option' to users A,B,anonymous AND APEX_040000. FLOWS_030000 already has these privileges.
Anybody any ideas ?
regs
johnnie
Edited by: johnnie d on 31-Aug-2011 10:58

I have experience the similiar problem. The error message: Invalid exist/not exist condition: ORA 2001 Query must begin with Select or With.
I have home page and concept review report page below home page. And Concept review form under the report page. The error is display in all of the three pages. I checked carefully and still not able to find where the error come from. Can you please help? All the report region and form region have the select statement, is it from the LOVs? Home
Concept review report
Concept reveiw Form(for detail info)
Thank you!

Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01400:

my application on apex.oracle.com.
http://apex.oracle.com/pls/otn/f?p=19391:1:931174149200985:::::
login : guest pwd : 123
To get the error
1. click on edit button on daily entry.
2. click on add button on daily_entry_detail
3. enter party name
4 enter qty
and click on add row to add 2nd row
following error
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01400: cannot insert NULL into ("PTEST"."DAILY_ENTRY_DETAILS"."ENTRY_DATE"), insert into "PTEST"."DAILY_ENTRY_DETAILS" ( "ENTRY_DATE", "PARTY_NAME", "QTY") values ( :b1, :b2, :b3)     Error     Unable to process update

Hi
I am going to assume that ENTRY_DATE should be the date that the user created the record - otherwise, you will have to add this field to your form to get the user to fill it in.
You need to check how your DAILY_ENTRY_DETAILS table is set up.
Go to SQL Workshop, Object Browser and in the list of tables, select DAILY_ENTRY_DETAILS, then click on the SQL option above the table definition and you should see something like:
CREATE TABLE "A_LOV1"
   (     "LOV1" NUMBER,
     "LOV1_NAME" VARCHAR2(100),
      CONSTRAINT "A_LOV1_PK" PRIMARY KEY ("LOV1") ENABLE
CREATE OR REPLACE TRIGGER "BI_A_LOV1"
before insert on "A_LOV1"
for each row
begin
if :NEW."LOV1" is null then
    select "A_LOV1_SEQ".nextval into :NEW."LOV1" from dual;
end if;
end;
ALTER TRIGGER "BI_A_LOV1" ENABLE
/(This is based on one of my tables, so the names etc will be different for you).
In the first block, the CONSTRAINT line tells you whether or not you have a primary key on the table - in the example above, the primary key field is LOV1. If this is not set up, you must do this - click on the Constraints option at the top of the page and click Create then follow the prompts.
The next block is a TRIGGER. This is set to run whenever a record is inserted into the table. A record being inserted is referred to as :NEW. You can see from the example that, in this case, when the record is being inserted, the value in the Primary Key is checked. If it is null, then a new sequence number is generated (see below) and the record is updated with this number before the record is saved.
The final block just switches the trigger on
You will see that this trigger says "select A_LOV1_SEQ.nextval...". This refers to a "sequence" object. Go back to the Object Browser and select Sequences. In my example, there is a sequence called A_LOV_SEQ which, if I select it and look at the sql, it is defined as:
CREATE SEQUENCE "A_LOV1_SEQ" MINVALUE 1 MAXVALUE 99999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLEThis is a counter that is used by the trigger to get the next Primary Key value for the record.
If you don't have the sequence, you will need to set it up. This can be done by clicking the Create button at the top right and following the prompts. Or you can copy the above, change the sequence name as required and then run this in the SQL Commands window
If you don't have the trigger, you can copy the code above and edit it to suit your table needs.
Now for the ENTRY_DATE issue. If this is to be automatically set to the current date, you can handle this in the trigger. For example - assume I had that field on my table, then my trigger would be:
CREATE OR REPLACE TRIGGER "BI_A_LOV1"
before insert on "A_LOV1"
for each row
begin
if :NEW."LOV1" is null then
    select "A_LOV1_SEQ".nextval into :NEW."LOV1" from dual;
end if;
if :NEW."ENTRY_DATE" is null then
    :NEW."ENTRY_DATE" := SYDATE;
end if;
end;
ALTER TRIGGER "BI_A_LOV1" ENABLE
/SYSDATE just means the current date/time
The CREATE and ALTER statements must be run separately in the SQL Commands window
Once you have that set up correctly, your form should work
Andy

Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001:

Hi,
Using HTMLDB 2.0 we have created several Master Detail forms using wizard. When we have started testing our application recently we are realising that most of the master details forms not working with an error "Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process"
We have created several such pages and now we are not sure on the resolution for the same.
Could you please helpus to resolve this issue?
Regards,
DGKM

Please check following thread:
Re: Error in mru internal routine: ORA-20001: no data found in tabular form

Error in mru internal routine: ORA-20001: Error in MRU: row= 0, ORA-20001:

Hi, I'm using HTMLDB version 1.6.0.00.87 on a DB 10.1.0.3.0.
I'm creating a Tabular Form to perform update operations on multiple rows in a database table.
The table is in a schema outside of the HTMLDB schema and my application works.
If I substitute my table with a synonym (outside of the HTMLDB schema) pointing to another table (outside of the HTMLDB schema), the select works fine but when I try to update records an error occurs:
0.05: Branch point: BEFORE_PROCESSING
0.05: Processing point: AFTER_SUBMIT
0.05: ...MULTI_ROW_UPDATE (AFTER_SUBMIT) #OWNER#:CSTCMP:T$NCMP:T$CPCP
0.08: Show ERROR page...
0.09: Processing point: AFTER_ERROR_HEADER
0.10: Processing point: BEFORE_ERROR_FOOTER
Error in mru internal routine: ORA-20001: Error in MRU: row= 0, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "1F2F93F97DFD18A9D69960FCD28AF6EF", item checksum = "A884FA378C851786DDFE3A33709CB23C"., update "WS_T1"."CSTCMP" set
If I perform with SQL the update on the synonym, it works.
I only have a browser connected to the application and I'm not locking the table.
I don't think this is correlated with
Re: Error in mru internal routine (HTML DB BUG?)
What do you think about?
Thanks in advance.

To look into what? You probably modified your tabular form by adding a column and you didn't take care of the column source.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Error in mru : ORA-20001: Error in MRU: row= 1 Current version of data ...

hi i am getting tihs error msg
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum
i'll try to show a form table in which i can edit and add data
when i use the wizzard it is all fine with editing but i cant creat a new item because i have to insert my primary key and that shoud be done automatically.
ok again
my PK is at first col1 and second col2
i got a dropdown list in which i choose an item from col1 to just show items in my form with that value, here are more than one results possible
no i want to edit col2 up to col4
or add a line with the same col1 but different col2 and some col3-col4 values
but if i add a line i want to insert col2 to up to col4 (and the PK from col1 shoud be automatically insert from my dropwdown list i choosed before)
i want in col2 an drop down list
so all this works fine i got all the changes i want but when i try do save or update my changes i got the error frome above
i think the problem is at the primary key thing cause i want to choose a part manually but i have to
to get the new line actually u use the add row link but i use instead after my select statement an
Union select :P62_PNR_VOll, null, null, null from dual
to get my first pk automatically from my dropdown element (in my case :P62_PNR_VOLL)
how can i solve that error?
thx for ur help
regadrs
Falk

Hi Falk,
It is usually best to have a sequence number for the primary key on a table. If you need to restrict other fields to be unique, then you can create a constraint to do this.
To create a sequence number and apply this to a new record, you need to do two things:
Let us say that you have a table called TABLEX and this has a numeric primary key field of ID. Do the following in the SQL Commands window
1 - Create a sequence SQL object:
CREATE SEQUENCE "TABLEX_ID_SEQ" MINVALUE 1 MAXVALUE 99999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE2 - Create a trigger:
CREATE OR REPLACE TRIGGER "TABLEX_BI"
BEFORE
INSERT ON "TABLEX"
FOR EACH ROW
BEGIN
IF :NEW.ID IS NULL THEN
SELECT TABLEX_ID_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END IF;
END;This needs to be enabled, so run:
ALTER TRIGGER "TABLEX_BI" ENABLEWhen this is done, you then have "An existing trigger" that you can use for your tabular form. When a new record is created, the trigger is run and this checks for a value in the ID field. If this is NULL, then the next value in the sequence is assigned to it.
Primary Keys can be based on other values. You can use any value from the current record - for example, if you need to get the value from the XXX field, you just reference :NEW.XXX You can use this to pass into a function that returns your new primary key value. But I would recommend keeping to one field for your primary key as this makes things a lot simpler later on.
Andy

Classic Report - report error:ORA-20001: Error fetching column value

Hi,
In Apex 4 I have created an SQL report which errors with ORA-20001: Error fetching column value: ORA-01403: no data found.
It works fine if I hard code the start and end dates but fails when I use page items as parameters.
I call a stored function as below:
DECLARE
l_sql VARCHAR2(4000);
BEGIN
SELECT ICDB_PCT_MRSA_POS_REP(v('P40_NEWSTARTDATE'),
v('P40_NEWENDDATE'))
INTO l_sql
FROM dual;
RETURN(l_sql);
END;
although I have used the :P40_NEWSTARTDATE form too, with the same result.
Any suggestions will be welcome.
Thanks,
Chris

Hi Chris,
have you debugged if ICDB_PCT_MRSA_POS_REP is raising the no-data-found error or if it's the actual SQL statement which got returned?
Comment out the call to ICDB_PCT_MRSA_POS_REP and return a hard coded SQL statement with
return 'select [... here comes a sample sql statement returned by ICDB_PCT_MRSA_POS_REP]';to rule out that ICDB_PCT_MRSA_POS_REP is raising the error.
BTW what is the purpose of the select from dual? Just call the ICDB_PCT_MRSA_POS_REP directly like
return ICDB_PCT_MRSA_POS_REP(:P40_NEWSTARTDATE, :P40_NEWENDDATE);Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

Ora -20001 error coming while updating from a tabular form

Hi
I have a tabular form , which updates a table in the database.
Whenever I update the record first time I getting an error as
Error in MRU internal routine ORA-20001.Error in MRU:row=1,
ORA-1403 no_data_found, update abc.sale_forcast_temp set "PK_ID"=:b1,"W27"=:b2
Error unable to update process
But when I press Ok return to the form and then again try to update , records gets successfully updated
Regards
Shashi

Kamal,
This will be the pseudocode.
Procedure A()
select * from EMP bulk collect into records_array; --Of type RECORD_ARRAY
batch_count = (records_array.length) / batch_size;
--batch_size is say 5000 rows and batch_count is the number of batches
for i in 1..(batch_count+1)
B( records_array);
C();
commit;
Procedure B(records_array in RECORD_ARRAY )
INSERT /*+PARALLEL(EMP_DUMMY, 2) */
INTO TABLE EMP_DUMMY
SELECT * from TABLE(CAST(records_array as RECORD_ARRAY) ;
Procedure C()
Other operations which include reads on the EMP_DUMMY table;
This is the top view of how it looks like. Actually the Select statement for the insert statement is very complex and I do a join on the records that are being passed in by casting it into a table. This query is taking about 40 minutes for 10,000 rows in the records_array. I need to parellelise this query because each row of the records_array yields a different row for the EMP_DUMMY table.
I hope that I made it clear for you.
Can you also tell me if procedure C in which I shall be doing a read on the EMP_DUMMY table, has any affect of the parallel insert
Thanks for your help.

ORA-20001: Error in MRU – Master-Detail

We don’t allow to user modify the data and I remove a delete button in Master Detail.
When I Add a row, I have the following message.
Error in mru internal routine: ORA-20001: Error in MRU: row= 1,
ORA-20001: ORA-20001: Current version of data in database has changed
since user initiated update process. current checksum =
"BCCD5C47988C796DDF2D84B10BB8E345", item checksum =
"C604943867B330EAE028B93903CE2F08"., update "SVR"."SVR_NOTES" set
"SVRN_ID" = :b1, "SVRN_SVRL_ID" = :b2, "NOTE_DETAIL" = :b3, "CR_DT" =
:b4, "CR_USR" = :b5, "LM_DT" = :b6, "LM_USR" = :b7Can anyone help me?
Thanks in advance,
Sam

Hi Sam,
You can hide the button very easily without deleting it. Click on the Button in the edit page under the button section. Click on the Condition in the heading tab and change the Condition type attribute to Never. It will never display the button in your page.
Hope this helps.
Regards,
M Tajuddin

Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01779:

I have a tabular form based on a view like:
select
t1.id,
t2.network_id,
t2.month_id,
t2.icp_ic,
t1.status,
t1.disc_comment
from
table1 t1,
table2 t2
where
t1.month_id (+) = t2.month_id and
t1.network_id (+) = t2.network_id and
t1.icp_id (+) = t2.icp_id
id is a surrogate key of table1 and there is a trigger to populate this on insert. There is also a unique index on table2 (month_id, network_id, icp_id). When I change the disc_comment column through the form and try to save I get an error:
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01779: cannot modify a column which maps to a non key-preserved table
If I take out the outer join, it works fine. The problem is table1 will not have a row for every row in table 2, hence I need the outer join. Any ideas how I can get around this problem?
Regards
Sadanand

Hi Andy,
Yes I am paginating the form and I am not getting a set of blank rows. What I mean by next set of records is - if the page is showing rows 11 to 20 and I enter a comment against row 15 and save, the form inserts the comment into the table via the INSTEAD OF trigger and the page automatically refreshes with rows 21 to 30 from the query. On the other hand, if I click Prev link and redisplay rows 11 to 20, change the comment and click on Save, the form updates the comment and refreshes the page with rows 11 to 20. If I update the comment again, it redisplays page with rows 11 to 20 and this is the behaviour I desire when I insert data. Remember that I am using outer join, so there will be a mix of inserts and updates of data. I hope my explanation is clear. I have tried removing the tabular form region and starting from scratch but that hasn't helped - maybe I will drop the page and recreate it.
As for checksum error, you are right - it disappears after I logout and login again.
Regards
Sadanand

ORA-20001: Error in MRU: on move from Dev to Prod

Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "2BCE6F4EB6F357144C392489EB0A193F", item checksum = "13CE2299AFA3A80DF1E31BB71F7CB0B1"., update ...
I recieved the above error when installing my application in my production database. The probem does not occur in development. I get the error on almost all my multi-record-update blocks. If I recreate the region in the production database it works fine. I've got way too many regions to recreate everyone.
Any ideas?

"9657",
Please explain "I recieved the above error when installing my application in my production database." During what installation step do you see this? Or do you mean that it happens when you run your applications after you installed them? Or are you seeing this message when you run our internal applications? How consistently do you see this error?
What steps did you take to move workspaces and applications from development to production? Can you import/install a test application on htmldb.oracle.com to try to reproduce a test case there?
Perhaps your production version of HTML DB and the RDBMS are downlevel or unsupported.
Scott

Error in mru internal routine ORA-20001 Error in MRU

Hi,
In my APEX application, tabular form is used. Add row and Submit buttons are all present. When a user enter all the details and click Add row or Submit, the values are stored in the DB.
But once in a while, when the user clicks the Submit button, the following erros pops up. I have no clue on what basis, I am getting this, as the case is not consistent. Can someone help me to figure this out.
If you want more details, please let me know.
ERROR
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "54667634DB35954B3405B722187947CD", item checksum = "4E4090E68119768E76068A7A4D8DA8BA"
Thanks!

the PK is a composite key, which is automatically generated by the trigger in Page 2, when the user clicks a "Generate report" button.
In page 3 when the user enters the data, those datas are filled in against the PKs
The process I am using here is:
begin
insert into <table name> (ID,expense_id,submitted_by) select nvl(max(id),0)+1,1,:APP_USER from <table name>;
end;
ID - primary key
expense_id - secondary primary key
both forms the composite keys.
So in the tabular form, when Add row button is kept on clicking, sometimes when it hits more than 5, we enter the values and click button, we get error.
Add row also submits the value to the database and generate a ID and new expense ID.....

ORA-20001: error 29th ORA-24344 When creating a workspace

Similar Messages

Maybe you are looking for