Error 80004005 using ODAC 10.2.0.2.20 / OraOLEDb & COM+ aplication ...

Hello,
 
 
I have a COM+ application I am testing on 10GR2 that uses ORAOleDb driver to connect.
 
The application works fine with ODAC 10.1.0.4.0.
However installing ODAC 10.2.0.2.20 the application does not work and fails with E_FAIL.
 
 
<li>I have a clean installation with different homes for DB and client as suggested. </li>
<li>All other applications use the new divers fine and connect without issue only COM+ objects cannot connect and use transactions.</li>
<li>I have tried the permissions fix for the bin dir and confirmed the ACLs are in place.
</li><li>I have run the oramtsadmin.sql on the database and confirmed it completed without errors.</li>
<li>I have made sure the MTxOCI registry key values are correct for 10G and that the files exists.</li>
<li>For the login for the COM+ application I used the same login that worked in the previous ODAC, I have also set it for testing to use various admin level accounts to try and get it working, no luck.</li>
 
What I need to know is what might a upgrade be missing from the upgrade (or that is new to set) that will make it work.
 
I have spent hours trying to query google and the forums for an answer and will continue to do so.
 My thanks for any help or knowledge passed on.
 
Regards,
Eric

Still working now I have used the MS Oracle driver to connect just fine with the exact same application, with OpenServiceComponents only changing the Provider. Everything else is the same. This leads me to belive I have some setup issue qith OraOLEDB that happens in the ODAC install that I have missed.
Still searching/working on this...

Similar Messages

CLR error 80004005

I installed a software on my sony vaio with OS windows 7. I ran the software but got CLR error:80004005. I have Microsoft .Net Framework 1.1, Microsoft
.Net Framework 4 Client Profile, Microsoft .Net Framework 4 Extended . Any help will be greatly appreciated. thanks much I checked the temp file using %temp% and at the bottom it has a file called windows 6.1 KB958488-V6001-X64. when I click on that
it says error OX80070424. Can any one help please. It would be greatly appreciated. Thanks much
I have read all the solutions for this error message, but my problem seems different. can anyone help me please?

Hi,
You can check the Answer in this link and see what you can find. 8)
CLR Error: 80004005 The program will now terminate
If you say it can`t be done then i`ll try it

TS Failing - OSDSetupWindows - answerFilePath empty? Error 80004005

Hi there,
Stumped on this for a couple of days now so here it goes : new here and somewhat "new" to SCCM (only about 4 months of experience with task sequencing + about a year with the operational side & admin)
That being said : I'm currently trying to get an already existing TS (new client) working. But it fails during the "Setup Windows and Configuration Manager" step. As far as I understood it (reading through tons of articles), the OSDSetupWindows.exe
will be launched (it does according to the log) and the PC should reboot (continuing with the unattend.xml) which has been created during the previous TS steps?
I will copy/paste the log after this (firm name/server has been modified for security purposes) but I see this :
this->answerFilePath.empty() == false, HRESULT=80004005
This is also the errorcode that appears as the resulting code when the sequence fails. Is this the initial cause? If so : where is this answerFilePath set? It should be a read-only variable if I'm again not mistaken?
thanks a lot for any and all help!
/dimi
<![LOG[Expand a string: OSDSetupWindows.exe]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:782">
<![LOG[Expand a string: ]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:782">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="commandline.cpp:228">
<![LOG[Set command line: OSDSetupWindows.exe]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="commandline.cpp:731">
<![LOG[Start executing the command line: OSDSetupWindows.exe]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="instruction.cxx:722">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="10:17:01.812-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="instruction.cxx:751">
<![LOG[Expand a string: WinPEandFullOS]LOG]!><time="10:17:01.828-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:782">
<![LOG[Executing command line: OSDSetupWindows.exe]LOG]!><time="10:17:01.828-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="commandline.cpp:827">
<![LOG[==============================[ OSDSetupWindows.exe ]===========================]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="OSDSetupWindows" context="" type="1" thread="1660"
file="setupwindows.cpp:1627">
<![LOG[Command line: "OSDSetupWindows.exe"]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="OSDSetupWindows" context="" type="1" thread="1660" file="setupwindows.cpp:1628">
<![LOG[this->answerFilePath.empty() == false, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,351)]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="OSDSetupWindows"
context="" type="0" thread="1660" file="setupwindows.cpp:351">
<![LOG[setup.run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\setupwindows\setupwindows.cpp,1650)]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="OSDSetupWindows" context="" type="0"
thread="1660" file="setupwindows.cpp:1650">
<![LOG[Exiting with code 0x80004005]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="OSDSetupWindows" context="" type="1" thread="1660" file="setupwindows.cpp:1696">
<![LOG[Process completed with exit code 2147500037]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="commandline.cpp:1123">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="10:17:01.859-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="instruction.cxx:804">
<![LOG[Failed to run the action: Setup Windows and Configuration Manager.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:17:01.875-120" date="04-23-2015" component="TSManager" context="" type="3" thread="1068" file="instruction.cxx:895">
<![LOG[MP server (REMOVED). Ports 80,443. CRL=false.]LOG]!><time="10:17:01.875-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="10:17:01.906-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="10:17:01.906-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="10:17:01.922-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="10:17:01.937-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="10:17:01.937-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SERVER.FIRM.com:80 CCM_POST /ccm_system/request]LOG]!><time="10:17:01.937-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="10:17:01.984-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:8939">
<![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="10:17:01.984-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:668">
<![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="10:17:01.984-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:668">
<![LOG[Clear local default environment]LOG]!><time="10:17:01.984-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="executionenv.cxx:807">
<![LOG[Let the parent group (Setup Operating System) decides whether to continue execution]LOG]!><time="10:17:01.984-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068"
file="instruction.cxx:1004">
<![LOG[Let the parent group (Software and Updates) decide whether to continue execution]LOG]!><time="10:17:02.000-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068"
file="instruction.cxx:254">
<![LOG[Let the parent group (Setup Operating System) decide whether to continue execution]LOG]!><time="10:17:02.000-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068"
file="instruction.cxx:254">
<![LOG[The execution of the group (Setup Operating System) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="10:17:02.000-120" date="04-23-2015" component="TSManager" context="" type="3" thread="1068" file="instruction.cxx:217">
<![LOG[Failed to run the last action: Setup Windows and Configuration Manager. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="10:17:02.000-120" date="04-23-2015" component="TSManager" context="" type="3" thread="1068" file="engine.cxx:213">
<![LOG[MP server (REMOVED). Ports 80,443. CRL=false.]LOG]!><time="10:17:02.000-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="10:17:02.031-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="10:17:02.031-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="10:17:02.047-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="10:17:02.062-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="10:17:02.062-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SERVER.FIRM.com:80 CCM_POST /ccm_system/request]LOG]!><time="10:17:02.078-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="10:17:02.109-120" date="04-23-2015" component="TSManager" context="" type="0" thread="1068" file="libsmsmessaging.cpp:8939">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="10:18:05.907-120" date="04-23-2015" component="TSBootShell" context="" type="1" thread="792" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:18:05.907-120" date="04-23-2015" component="TSBootShell" context="" type="1" thread="792" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="10:18:05.907-120" date="04-23-2015" component="TSBootShell" context="" type="1" thread="792" file="bootshell.cpp:432">
<![LOG[Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,923)]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager"
context="" type="0" thread="1068" file="tsmanager.cpp:923">
<![LOG[Task Sequence Engine failed! Code: enExecutionFail]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="3" thread="1068" file="tsmanager.cpp:923">
<![LOG[****************************************************************************]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="tsmanager.cpp:953">
<![LOG[Task sequence execution failed with error code 80004005]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="3" thread="1068" file="tsmanager.cpp:954">
<![LOG[Cleaning Up.]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="tsmanager.cpp:675">
<![LOG[Removing Authenticator]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="tsmanager.cpp:686">
<![LOG[shKey.DeleteValue( c_szRegValue_SecurityToken ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\ccmutillib\ccmutillib.cpp,1660)]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context=""
type="0" thread="1068" file="ccmutillib.cpp:1660">
<![LOG[Cleaning up task sequence folder]LOG]!><time="10:32:03.832-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068" file="utils.cpp:2329">
<![LOG[Unable to delete file C:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing.]LOG]!><time="10:32:04.754-120" date="04-23-2015" component="TSManager" context="" type="1" thread="1068"
file="ccmfile.cpp:1056">

Just had a look in the Apply Operating System step :
1. the option "apply operating system from a captured image" is checked , the Image package is "Windows 8.1 Enterprise en-US", the Image is "1 - Windows 8.1 Enterprise"
2. The "use an unattended or sysprep answer file for a custom installation" is NOT checked...
So... Getting closer to a solution? I've already F8'd the PE boot and saw that the unattend.txt does exist under c:\windows\panther\unattend\unattend.xml - also filled in with our values which we specified in the "apply windows settings" +
"apply network settings" (both following right after a "BCDBoot Fix" step I created for this UEFI device [command : bcdboot c:\windows /s c: /f UEFI /l en-us].
My questions :
the package option : what should I specify as this?
the file name option : can I just use that "c:\windows\panther\unattend\unattend.xml" ?
/dimi

Mysterious ORA-00933 on startup when using ODAC unmanaged/managed

I've been chasing this issue for a while now with no success. Whenever my app starts there's a chance that the first query hitting the database will cause an ORA-00933. This always happens at the very first query hitting the database. I've traced the command text with TraceLevel, the following command is issued:
SELECT 1 AS "C1", "Extent1"."SOME_FIELD"
FROM "SOME"."TABLE" "Extent1"
WHERE ("Extent1"."SOME_FIELD" IS NOT NULL)
WHERE (ROWNUM <= (1) )
which is obviously malformed. My linq query does not contain any FirstOrDefault() or similar calls, it's a simple db.Table.Where(...) query. The last WHERE clause should not be there at all. What really puzzles me is this behavior is non-deterministic. The very same application with the very same binaries and configuration in the very same environment sometimes produces the correct query sometimes not. This always happens at app startup, it is consistent for the lifetime of the app (which is usually restarted every morning due to the inactivity timeout). If the malfunction occurs an app pool restart usually does not but a full IIS restart (without OS restart) usually does fix the issue even if only temporarily. The app runs in its own private app pool so despite having multiple ODAC versions on the system I have verified that only the specific provider gets loaded into the app process (either Oracle.Managed or the unmanaged Instant Client). Sometimes there's no error for days, sometimes I have to take action every morning, and I haven't been able to find a reliable repro. I'm having the same issue with both the managed and the unmanaged provider. Do you have any advice on how to proceed from here?

Hi!
More or less the same setup except no MVC and using ODAC 12cR2. The app uses a single database though other apps on the same IIS (all in different dedicated pools) use others. Even though this test server has ODAC11 installed - some use this, some use instant 12c, some managed 12c - I've also verified that the affected apps always get the correct dll version loaded into their address space.
My dev setup has only one ODAC version (always the latest) and it still bugs out although less frequently. I've tried full installation, instant client, managed client, eventually all produce the problem.
I'm not sure if this is an edmx problem since some of my affected apps haven't changed for more than a year and were working fine back then.

Unspecified error (80004005) with LONG datatypes

Hi,
I am trying to create a recordset (using ADO/ASP) which has two or more LONG fields returned but an Unspecified error (80004005) is returned by the browser.
Any help/hints on why this happening and whether this can be worked around.
Thanks.
null

insert into temp values ('abc');
cannot (must not) work, when the column is type long (thats a numeric type!!)
-> here you get an ora- 00911 errorcode
that the select doesn't work then should be clear.
mfg f.humer

Connection String example required using ODAC 10.2

Hi All,
Apologies if this has already been covered...
I have a .net app running on W2K3 SP2 x86. It uses an Oracle 10G (10.2.0.4) database backend running on Redhat Linux x86_64.
I have two oracle client homes on the app server; one for full admin (10.2.0.4), the other for ODAC 10.2.0.2. The default home is the ODAC client.
Normally, I would use the following conn string in my web.config;
Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS =(PROTOCOL=TCP)(HOST=MYHOST.MYDOMAIN.LOCAL)(PORT = 1521)))(CONNECT_DATA = (SERVICE_NAME=MTDB)));User ID=MY_USER;Password=MYPASSWORD;
This works just fine. But now, I have a requirement to use Kerberos authentication.
I have configured Kerberos for the database, client and Active Directory successfully and have verified all the parameters and that I can connect to the database using the Windows credential successfully - well, at least from the Full Admin home. I have mirrored config changes the ODAC home (obviously updating any absolute file path references).
However, now I need to update the above connection string in web.config to use Kerberos. This is where I am struggling... Can anyone provide me with an example? I have not made any changes to web.config yet.
Many thanks, Richard.

Ok - I didn't need to raise a ticket with Oracle. Trial and error resolved this.
1. If you are using IIS, then you need to ensure that the identity account for the App Pool is set to the same credential used to authenticate against the database (in much the same way as one would for authenticating against a sql database). Remember to add the credential to the IIS_WPG group on the app server.
2. For the Website properties / Directory Security tab; depending on your requirements, enable/disable anonymous access tick-box and the Integrated Windows Security tick-box. I am not using Single Sign-ON for the application yet, so I enabled the anonymous access tick-box and set the credential to match the database credential.
3. If you are using a FULL ADMIN Oracle client home, then use this connection string "Data Source=MyDatabaseName; Integrated Security=SSPI;"
If you are using ODAC, then use this connection string "Data Source=MyDatabaseName; User Id=/;"

Flash10h.ocx error 80004005

Flash10h.ocx inserted as an ActiveX component in a vb6 form (Windows XP service pack 3, IE 6 sp3, VB6 sp3) works during execution but won't let me save forms anymore with error 80004005.
And I can't install Flash10e.ocx from a saved version because it still reinstalls Flash10h.ocx.
I URGENTLY NEED A Flash10i.ocx update to correct this (or a fix solution, of course)
PLEASE.
(Is anybody reading this forum?)

It's good to know that 'm not the only old fart that still uses VB6!
I've got hundreds of thousand lines of code in VB6 and porting it over to .NET would be very un-economical in this stage. Flash is only a small part of my software, but it kept me awake... I kept loosing projects and had to revert back to backups until I found out that the .frx file is the only one affected.
It is the first time EVER that a control crashes a whole project and the honour goes to Adobe...
Hope they'll fix it soon or else I will have to incorporate a web control that shows the flash, not the most elegant solution, but at least that works well...
Greetings from The Netherlands!
Marvin

OraOLEDB error '80004005' (more)

Immersed in an SQL-Server to Oracle conversion project with many SQL-Server stored procedures that return record sets. I am
attempting to establish the proper method of returning record sets to the .ASP code so as to minimize the changes required to
that code. Conversion of SQL-Server stored procedures to Oracle PL/SQL is progressing smootly.
PROBLEM: OraOLEDB error '80004005' when calling Oracle stored procedures that return result sets from .ASP
Anyone have any ideas what I can do to fix this?
TRIED:
 1) Granting Read/Write/Execute on Oracle Home directory on Web Server
 2) Modifying Windows Registry to point to proper Oracle Home .dll's for latest 10g Client
 3) Moving the REF CURSOR parameter in the stored procedure to the end of the parameter list
ENVIROMENT:
Oracle 10.1.0.2 Server
Oracle Provider for OLE DB release 10.1
Microsoft IIS Server 5.0 (Win 2000)
CODE:
<%@LANGUAGE="VBSCRIPT"%>
<%
SysCatConnString = "Provider=OraOLEDB.Oracle;" & _
 "Data Source=BPDB;" & _
 "User ID=utst;" & _
 "Password=cat;" & _
 "PLSQLRSet=1;"
Set objConnection = Server.CreateObject("ADODB.Connection")
objConnection.Open SysCatConnString
If objConnection.Errors.Count = 0 Then
Response.Write " NO connection errors"
End If
connState = objConnection.State
Response.Write " connState = " & connState
set cmd = Server.CreateObject("ADODB.Command")
cmd.ActiveConnection = objConnection
cmd.Parameters.Append cmd.CreateParameter("p_Application_ID", adSmallInt, adParamInput, , 2)
cmd.Parameters.Append cmd.CreateParameter("p02_Userid", adBSTR, adParamInput, 4, "test")
cmd.Parameters.Append cmd.CreateParameter("p03_Password", adBSTR, adParamInput, 4, "test")
cmd.Parameters.Append cmd.CreateParameter("spRetVal", adSmallInt, adParamOutput)
cmd.CommandText = "{ CALL dbo.up_sc888UserLogin2(?,?,?,?) }"
cmd.CommandType = adCmdStoredProc
cmd.CommandTimeout = 0
cmd.Prepared = true
set rsUser = server.CreateObject("ADODB.Recordset")
Set rsUser = cmd.Execute
ERROR MESSAGE:
At cmd.Execute I continuously receive:
NO connection errors
connState = 1
OraOLEDB error '80004005'
Unspecified error
/testing.asp, line 39
NOTES:
I can execute other stored procedures successfully, but the problem is that I cannot get past this issue with calling
stored procedures that return record sets (as REF CURSORs).
ORACLE 10g Windows STORED PROCEDURE CODE:
PACKAGE dbo AS
TYPE ref_Return IS REF CURSOR;
 PROCEDURE up_sc888UserLogin2 (o_RetVal OUT ref_Return, p_Application_ID IN NUMBER, p_Userid IN VARCHAR2, p_Password
IN VARCHAR2, p_ErrorCode OUT NUMBER);
END dbo;
CREATE OR REPLACE PACKAGE BODY dbo AS
PROCEDURE up_sc888UserLogin2(
 o_RetVal OUT ref_Return,
 p_Application_ID IN NUMBER,
 p_Userid IN VARCHAR2,
 p_Password IN VARCHAR2,
 p_ErrorCode OUT NUMBER)
IS
BEGIN
INSERT INTO testing (p_UserID, p_Password) VALUES (p_UserID, p_Password);
INSERT INTO testing (p_UserID, p_Password) VALUES ('x', 'x');
COMMIT;
 OPEN o_RetVal FOR
 SELECT Person_ID, AccessControl
 FROM tPerson, tAccessRights
 WHERE UserID = 'dherrin'
 AND tAccessRights.Value = tPerson.AccessRights;
 p_ErrorCode := 0;
END up_sc888UserLogin2;
END dbo;
/

FIXED
1) use cmd.CommandText = "dbo.up_sc888UserLogin2" rather than the Oracle Provider documentation that states that one must use ODBC calling structures (cmd.CommandText = "{call dbo.up_sc888UserLogin2}")
2) Declare the result set object...
Set rsUser = Server.CreateObject("ADODB.Recordset")
3) so that one can set the following properties:
rsUser.CursorLocation = adUseClient
rsUser.CursorType = adOpenDynamic
These changes fixed my problem, now on to the SYNONYM problem...

Microsoft Cursor engine error 80004005 Data provider or other...

I'm using Oracle 9i and ASP. And it works fine except for a query that returns like more than 6000 records and I get this error:
Microsoft Cursor engine error 80004005
Data provider or other service returned an E_FAIL status
/Includes/ValidaUsr.asp, line 60
The thing is that on my development server it works just fine, and on the production server it cracks. In line 60 I'm trying to read a record, and when the query returns like 1000 records it works perfect.

Well, you're in a somewhat bad spot. You should generally use server-side cursors and you're using client-side. Likewise, you're using Microsoft's OLE DB Driver for Oracle (known for issues) instead of Oracle's :(
For the Microsoft driver, the only thing I can think of is switching to server-side cursors. I know that's not much help, but I can't think of anything else that would cause that kind or odd error.
As I'm done with lunch now, I gotta get back to work.

Error 80004005 while downloading apps in Nokia 730...

Error 80004005 while downloading apps in Nokia 730!
Error mentioned below:
Store error
"We seem to be experiencing technical difficulties. Please wait a little while, then try again. If the problem continues, try restarting your phone."
This error code may be helpful: 80004005
Please provide a soultion. (Tried restarting multiple times but no use).
Attachments:
Nokia 730 Error.jpg ‏112 KB

Hello, rkkumundan. Are you still having the same issue? If yes, let's troubleshoot the issue by doing the hardware reboot. Your documents will not be deleted. To do this, press and hold both the volume down and the power keys for 10-15 seconds. Once done, try downloading the apps again. If that doesn't help, may we know if it happens only when downloading a particular app?
We'll wait for your reply.

TestStand 2013 error 80004005

For some reason whenever I try to run the Sequence Editor I get a "System Level Exception" followed by " Creating an instance of the COM component witch CLSID {B2794EF6-C0B6-11d)-939C-0020AF68E893} from the IClassFactory failed due to the following error: 80004005"
I have followed the published fixes including deleteing stationglobals.ini, running "Version Selector" etc to almost no avail. The exception is that after a PC re-boot it will run but quite slowly; closing the Sequence Editor and re-starting it brings back error 80004005.
I have also tried un-installing and re-installing TestStand as well as complete re-installtion of DS 2014.
Short of re-formatting my hard-drive and starting again I'm not sure what else I can do.
Any suggestions would be most gratefully received.
Keith
Solved!
Go to Solution.

1) Do you have any idea what might have changed around the time it used to work versus when it stopped working? Any new software installed? Some utility programs like graphics card utilities and virus scanners hook into all processes on a machine with Windows hooks and can sometimes cause unexpected problems. If you have anything like that installed recently, try disabling or uninstalling them and see if the problem goes away.
2) Do you have visual studio installed on your machine? What is likely happening is that an exception (really an access violation most likely) is being thrown inside the constructor of the engine when this problem occurs. If you can run seqedit.exe as the process to debug (with native debugging) with the Debug->Exceptions... dialog set to stop on thrown for "Native Run-Time Checks" and "Win32 Exceptions". And then when the exception occurs, break in the debugger, and do Debug->Save Dump As... to save a dump of the state of the process. Then attach the dump file here and we can take a look to see if it gives us any clues as to what might be the problem.
-Doug

Error '80004005' while opening recordset, while others work just fine

Hello,
I'm working on my first dynamic site: MS Access Database with VBscript. I have a DSN-less connection. Most of the dynamic pages are running fine, both in the local and remote server. Search results display in several pages when there are too many records, without any error (using a Request.QueryString). However, when I want to navigate from the Master page of results to a Details page (only one of the results' records) I get the following error:
error '80004005'
/einservices/EIA_details_list.asp, line 22
In the file in question, Line 22 opens a recordset. I think my SQL is correct as the entire site works well in the local server.
There is no problem with my DSN-less connection, as proven by the fact that the other dynamic pages are running well both in the local and the remote server.
Does anyone have a clue about what may be happening? This is really puzzling me.
Thanks for any help you can provide.

>when I want to navigate from the Master page of results to a Details
>page (only one of the results' records) I get the following error:
Are you sure you are using the same connection string on the detail and master?
Are you coding this by hand, or Server behavior?
What does the SQL look like?
Would really need to see the entire detail page code to be of more help.

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
 </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
 <connection-properties>
 <properties>
 <property>
 <name>xADataSourceName</name>
 <value>jdbc/SOADataSource</value>
 </property>
 <property>
 <name>dataSourceName</name>
 <value></value>
 </property>
 <property>
 <name>platformClassName</name>
 <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
 </property>
 </properties>
 </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error 80004005 using ODAC 10.2.0.2.20 / OraOLEDb & COM+ aplication ...

Similar Messages

Maybe you are looking for