ORA-27123 error while creating database

I am using dbca to attempt to create a database after installing 9i on a dual-CPU linux box running Red Hat 7.3.
When I click 'finish' on the database creation wizard, everything appeared to be correct, but I receive an error message indicating that Oracle is unable to attach to shared memory segment.
Additional information is that the machine has 640MB memory and a 40 GB disk drive.
It seems like I may have received this during the installation process, but can't be sure. Would that indicate that the installation didn't complete successfully?
Any help would be appreciated.

Try this one
*ORA-27123: unable to attach to shared memory segment.
I saw this error only in connection with Oracle 9i R2 (9.2.0) installation.
This error message showed up when the Oracle Database Configuration Assistant was running. I executed the following command to temporarely increase the maximum shared memory size:
As root:
# cat /proc/sys/kernel/shmmax
33554432
# echo `expr 1024 \* 1024 \* 1024` > /proc/sys/kernel/shmmax
# cat /proc/sys/kernel/shmmax
1073741824
Then click "Retry" for the Oracle Database Configuration Assistant.
It is recommended to increase the shmmax setting permanently for Oracle. So if you want to increase the maximum shared memory size permanently, add the following line to the /etc/sysctl.conf file:
kernel.shmmax=1073741824
I'm not quiet sure yet what the maximum size of the shared memory really should be. Also when you combine the Installation Guide with the Release Notes, you will see that other parameter(s) need to be changed as well. As soon as I have taken a
closer look at these issues, I will post the results here. But the temporary increase of the maximum shared memory size should keep you going to get Oracle9i (9.2.0) installed.

Similar Messages

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
            group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
            size 50M
            autoextend on
            next 10M maxsize unlimited
            extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
            size 10M
            autoextend on
            next 10M
            maxsize unlimited
undo tablespace undo
            datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
            size 10M
default temporary tablespace temp
            tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
            size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
          group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

Dbms_xmlschema.registerschema, (ORA-31084: error while creating table )..

Hello,
I have some problems with dbms_xmlschema.registerschema
My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
After
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8'));
commit;
end;I get:
ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
ORA-06512: at line 4
What I'am doing wrong or what is the reason for this error..

Arrgghhh.....
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8')
    , local => true
, genTypes => false
, genTables => false);
commit;
end;sorry...

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Oracle10g Import:ORA-01119: error in creating database

I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
This is the import command i'm trying:
imp db/db@sid file=file.dmp ignore=y full=y
But it still posts the following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by OPS$QZORA, not by you
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
"bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
"qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
" , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
"bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
"1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
"E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
"mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
"00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
"' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
"EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/home/NEW01.dbf'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
IMP-00000: Import terminated unsuccessfully

Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
thanks in advance
shiva

ORA-01119: error in creating database file

Hi,
I am trying to run scripts adcrtbsp.sql but it is giving following error.
adcrtbsp.sql script contains:
CREATE TABLESPACE
APPS_TS_TX_DATA
DATAFILE '?/dbf/transaction_table.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_2.dbf'
SIZE 1000 M;
ALTER TABLESPACE
APPS_TS_TX_DATA
add DATAFILE
'?/dbf/transaction_table_3.dbf'
SIZE 1000 M;
CREATE TABLESPACE
APPS_TS_TX_IDX
DATAFILE '?/dbf/transaction_index.dbf'
SIZE 1000 M REUSE
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128 K
SEGMENT SPACE MANAGEMENT AUTO ;
ALTER TABLESPACE
APPS_TS_TX_IDX
add DATAFILE
'?/dbf/transaction_index_2.dbf'
SIZE 1000 M;
sqlplus system/pwd @adcrtbsp.sql
CREATE TABLESPACE
ERROR at line 1:
ORA-01119: error in creating database file 'f:/oracle/dbf/transaction_table.dbf'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Anybody can guide ??

Hi,
Let me explain..
You have started you session
sqlplus system/pwd @adcrtbsp.sql
Its trying to create here "'f:/oracle/dbf/transaction_table.dbf' "
Try to check the path with folder whether exists or not "/dbf"
Aman.. nice reply... !! I am late :-(
- Pavan Kumar N

ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?

Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios

ORA-15180 Error while creating a new DB

Hi,
I am creating a Production db for version 11.1.0.7.
I am getting this error while creating the database:
ORA-15180: could not open dynamic library odm library0, error [open]
What steps i need to follow to diagnose this?
Cheers,
Kunwar

15180, 00000, "could not open dynamic library %s, error [%s]"
// *Cause: The library was not accessible
// *Action: Correct the permissions of the library and try again.

Error while creating database on 10.2 enterprise eidition

Hi,
When i trying to create database through batch file on oracle version 10.2 enterprise edition, its giving error.
ORA-01092: ORACLE instance terminated. Disconnection forced
Following error message logged in log file:
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
Offending statement at line 7032
create unique index apply$_conf_hdlr_columns_unq1
on apply$_conf_hdlr_columns(object_number, column_name)
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 7032
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
The same script is working fine on Oracle 10.1 Enterprise edition But its giving error on Oracle 10.2 Enterprise edition while creating database.
Please help.
Thanks in advance

Hi,
Content of PFILE:
# Basic Initialization Parameters
cluster_database=false
compatible=10.1.0.2.0
control_files = ("F:/oracle/oradata/DTO/ctrl01.ctl", "F:/oracle/oradata/DTO/ctrl02.ctl")
db_block_size=8192
# db_create_file_dest               # only used in OMF mode
# db_create_online_log_dest_n          # only used in OMF mode
db_domain=""
db_name=DTO
db_recovery_file_dest=F:/oracle/oradata/DTO/flash_recovery_area
db_recovery_file_dest_size=2G
db_unique_name=DTO_01
# instance_number               # RAC parameter
job_queue_processes=10
# log_archive_dest_n               # NOARCHIVELOG mode
# log_archive_dest_state_n          # NOARCHIVELOG mode
# nls_language                    # OS dependant
# nls_territory                    # OS dependant
open_cursors=50
pga_aggregate_target=10M
processes=50
# remote_listener               # RAC parameter
remote_login_passwordfile=EXCLUSIVE
# rollback_segments               # UNDO_MANAGEMENT mode
# sessions                    # derived from processes
sga_target=100M
shared_servers=0
star_transformation_enabled=FALSE
undo_management=AUTO
# undo_tablespace               # first UNDO tablespace
# Other Parameters
background_dump_dest=F:/oracle/admin/DTO/bdump
core_dump_dest=F:/oracle/admin/DTO/cdump
cursor_sharing=SIMILAR
db_file_multiblock_read_count=64
db_files=400
db_writer_processes=2
instance_name=DTO
log_buffer = 8192
log_checkpoint_interval = 10000
log_checkpoint_timeout = 0
os_authent_prefix=""
service_names=DTO
statistics_level=typical
timed_statistics=true
user_dump_dest=F:/oracle/admin/DTO/udump
utl_file_dir=*
Command in batch script:
CONNECT sys/oracle AS SYSDBA
STARTUP NOMOUNT PFILE=&ADMN_DIR/pfile/init&ORA_INST..ora
CREATE DATABASE &ORA_INST
     CONTROLFILE REUSE
     LOGFILE
          GROUP 1 ('&REDO_DIR_1/redo11.log','&REDO_DIR_2/redo12.log') SIZE 10M REUSE,
          GROUP 2 ('&REDO_DIR_1/redo21.log','&REDO_DIR_2/redo22.log') SIZE 10M REUSE,
          GROUP 3 ('&REDO_DIR_1/redo31.log','&REDO_DIR_2/redo32.log') SIZE 10M REUSE,
          GROUP 4 ('&REDO_DIR_1/redo41.log','&REDO_DIR_2/redo42.log') SIZE 10M REUSE
     DATAFILE
          '&DATA_DIR/syst01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
          EXTENT MANAGEMENT LOCAL
     SYSAUX DATAFILE
          '&DATA_DIR/saux01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
     DEFAULT TEMPORARY TABLESPACE temp
          TEMPFILE '&TEMP_DIR/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
          EXTENT MANAGEMENT LOCAL UNIFORM SIZE 10M
     UNDO TABLESPACE undo
          DATAFILE '&UNDO_DIR/undo01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G,
               '&UNDO_DIR/undo02.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
     CHARACTER SET AL32UTF8
     SET TIME_ZONE = 'Europe/Warsaw';

I am getting this error while creating Database manually.

SQL> @anupam.sql
create database anupam
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/dtxnspc.bsq' near line 20
ORA-00604: error occurred at recursive SQL level 1
ORA-19502: write error on file "/home/oracle/anupam/users02.dbf", block number
24704 (block size=8192)
ORA-27072: File I/O error
Linux Error: 25: Inappropriate ioctl for device
Additional information: 4
Additional information: 24704
Additional information: 53248
Process ID: 21047
Session ID: 1 Serial number: 3

is your directory /home/oracle/anupam/ 100% full can you paste df -kh output

Oracle 8i, Getting ORA-1501 error while creating new DB

Hi folks,
I am trying create a new database on an HP Machine (Details given below) but getting following error.
ORA-1501 - signalled during Create Database
LOGFILE 'G:\logfiles\logaf1.ora'
We actually have a custom application setup.exe to create new database.
Same setup when installed on a different low end machine works fine.
Before begining the setup in summary page it shows following information.
Block buffer count = -3 Bytes
Shared Pool Size = -41425 KBytes
Yes the values displayed are in negative.
Don't know if this is the reason for the ORA-1501 error.
Can anyone please suggest how to resolve this issue.
Machine configuration is as follows:
H/W details:
HP Server with RAID configuration
4, PIII CPU's
RAM: "4 GB"
S/W details
O.S:Windows 2000 Server with Service Pack-2
Oracle Version: 8i
Patch applied: Oracle8i Patch Set Version 8.1.7.3.0

Try look to alert<SID>.log file for full error report (you could paste it here).
Also from alert log you could get real values for db_block_buffers and shared_pool_size parameters that used during instance startup.

Error while creating database user with first.lastname pattern

I am trying to user the database user management connector to create oracle database user, but when i use first.lastname pattern as the database username i got an ora-01936
ERROR,07 Jul 2010 17:06:56,370,[OIMCP.DBUM],oracle.iam.connectors.dbum.common.db.util.DBUtil : executeQuery
ERROR,07 Jul 2010 17:06:56,370,[OIMCP.DBUM],Error occurred while trying to execute query.
ERROR,07 Jul 2010 17:06:56,370,[OIMCP.DBUM],Description : ORA-01936: cannot specify owner when creating users or roles
ERROR,07 Jul 2010 17:06:56,370,[OIMCP.DBUM],java.sql.SQLSyntaxErrorException: ORA-01936: cannot specify owner when creating users or roles
i figured out that when i use fist.lastname as database username i have to add double quotes, so i can create de user properly , but now the add role or grant task fails with ora-01741.
ERROR,07 Jul 2010 17:18:01,096,[OIMCP.DBUM],================= Start Stack Trace =======================
ERROR,07 Jul 2010 17:18:01,096,[OIMCP.DBUM],oracle.iam.connectors.dbum.common.db.util.DBUtil : executeQuery
ERROR,07 Jul 2010 17:18:01,096,[OIMCP.DBUM],Error occurred while trying to execute query.
ERROR,07 Jul 2010 17:18:01,096,[OIMCP.DBUM],Description : ORA-01741: illegal zero-length identifier
ERROR,07 Jul 2010 17:18:01,096,[OIMCP.DBUM],java.sql.SQLSyntaxErrorException: ORA-01741: illegal zero-length identifier

Did u try adding the roles via sqlplus by running a command ?
Whats the result
Thanks
Suren

Error while creating database 10g

Hi,everyone
I am installing oracle 10g db on Win2k sp4 platform ,while after i have completed software configuration i dicided to use dbca to create database,however i always got the "Ora-03114"error,end of communication channel,anyone have any idea?Thanks in advance.

At what point in the process does the error occur?
Kind regards,
Russ Cannon

ORA-31061 error while creating XMLType table with virtual column

I'm not calling it frustration ;)
but still... what about this one :
SQL> select * from v$version;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
Table created.Now, on the latest version :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for 32-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
      passing object_value returning content)
ERROR at line 7:
ORA-00604: error occurred at recursive SQL level 1
ORA-31061: XDB error: dbms_xdbutil_int.get_tablespace_tab
ORA-06512: at "XDB.DBMS_XDBUTIL_INT", line 1002Is there something I should be aware of?
Right now, I'm just evaluating the version so I can't submit any SR.
Thanks for anyone trying to reproduce the issue.

Just tested again on a new installation (64-bit server).
It works :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE     11.2.0.3.0     Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL>
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7                 passing object_value returning content)
8        as number
9      )
10    )
11 );
Table created
Now I'll try to see what are the differences between the two installations.
Thanks Dan and Marco for looking into this.
Edited by: odie_63 on 2 mai 2012 15:51

ORA-27123 error while creating database

Similar Messages

Maybe you are looking for