ORA-27154: post/wait create failed

hi
i am runing Oracle 9i R2 on SunOS 5.9 , i tried to startup my database and it gives me this error:
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpsemsper
i have no space problem in my server , i have another database running on the same server without any problem.
any suggestions !!
thanks in advanced..
wisam

what are the effects of increasing the semmni and the semmnsMore memory (some KBs likely) allocated by the kernel.
and do i have to reboot the server ?!.Yes (from Oracle doc: If you change the settings, save the /etc/system file and restart the system.)
accually i have 4 databases in this server . does this make deferent ?From http://download-uk.oracle.com/docs/html/A96167_01/pre.htm#CHDCEHBG
The SEMMNS parameter should be set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, and then adding an additional 10 for each database.
Message was edited by:
Pierre Forstmann
Message was edited by:
Pierre Forstmann

Similar Messages

  • ORA-27146 Post/Wait Initialization failed

    Hi all,
    I had a problem when trying to startup 2 database at Solaris8 machine. Please help me to solve this problem.
    Problem:
    I have created 2 database seperately. But I couldnt started up those 2 database at the same machine. Like either one is alive but not second one. When I startup the second database, got this error message : ORA-27146 Post/Wait Initialization failed.
    I have tried to increase the sizes of System file variables at /etc/system, but its not.
    I dont know the calculation for those variables when I use 2 or more instances.
    Environment : Solaris8 / Oracle 8.1.5.
    Please let me know if you need more clarification of problem.
    null

    its a resources issue. change the init.ora file for resources such as db block buffers, processes, etc. you will be able to start the instance.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chinnadurai Periyasamy ([email protected]):
    Hi all,
    I had a problem when trying to startup 2 database at Solaris8 machine. Please help me to solve this problem.
    Problem:
    I have created 2 database seperately. But I couldnt started up those 2 database at the same machine. Like either one is alive but not second one. When I startup the second database, got this error message : ORA-27146 Post/Wait Initialization failed.
    I have tried to increase the sizes of System file variables at /etc/system, but its not.
    I dont know the calculation for those variables when I use 2 or more instances.
    Environment : Solaris8 / Oracle 8.1.5.
    Please let me know if you need more clarification of problem.
    <HR></BLOCKQUOTE>
    null

  • ORA-27140: attach to post/wait facility failed

    Hi
    We are facing following probelm on hp 11i /oracle 9i system
    ##ORA-27140: attach to post/wait facility failed
    Details Log As Below
    BR0002I BRARCHIVE 6.40 (15)
    BR0006I Start of offline redo log processing: adqqukeg.sve 2005-08-20 11.59.10
    BR0280I BRARCHIVE time stamp: 2005-08-20 11.59.10
    BR0301W SQL error -27140 at location BrDbConnect-2
    ORA-27140: attach to post/wait facility failed
    BR0310W Connect to database instance UX1 failed
    BR0280I BRARCHIVE time stamp: 2005-08-20 11.59.10
    BR0301W SQL error -27140 at location BrDbConnect-2
    ORA-27140: attach to post/wait facility failed
    BR0310W Connect to database instance UX1 failed
    BR0278W Command output of '/oracle/UX1/920_64/bin/sqlplus':
    SQL*Plus: Release 9.2.0.6.0 - Production on Sat Aug 20 11:59:10 2005
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORA-01034: ORACLE not available
    SQL> Disconnected
    BR0280I BRARCHIVE time stamp: 2005-08-20 11.59.10
    BR0279W Return code from '/oracle/UX1/920_64/bin/sqlplus': 0
    BR0302W SQLPLUS call for database instance UX1 failed
    BR0323W 'Archive log list' for database instance UX1 failed
    BR0019W Volume size or disk capacity reached - not all offline redo log files will be saved
    BR0280I BRARCHIVE time stamp: 2005-08-20 11.59.10
    BR0008I Offline redo log processing for database instance: UX1
    BR0009I BRARCHIVE action ID: adqqukeg
    BR0010I BRARCHIVE function ID: sve
    BR0048I Archive function: save
    BR0011I 34 offline redo log files found for processing, total size 1160.301 MB
    BR0112I Files will not be compressed
    BR0130I Backup device type: tape
    BR0102I Following backup device will be used: /dev/rmt/0mn
    BR0103I Following backup volume will be used: UX1A01
    BR0280I BRARCHIVE time stamp: 2005-08-20 11.59.10
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRARCHIVE:
    If any one know this error

    we solved the problem by resetting the permissions on the oracle executable as described underneath in the first solution mentioned.
    The error ora-27140 is due to the lack accessibility to oracle
    executables.
    1. Please make sure that all oracle executables has permission as per
    the note mentioned below.
    583861 UNIX: Errors due to Oracle executable
    (chmod 6751 oracle) Owner ORA<SID>
    2. If the problem is not solved with this, please download the latest
    patch level of the BR*tools as per SAP note 12741.
    " Check the owner, the group and the permissions for sapdba and the br*
    tools as described in Note 113747.
    (Up to 4.6D, the same settings were valid for sapdba as for brarchive
    and brbackup, but this has changed with the transfer of the command lin options to brconnect.)
    File libsbt.* is a dynamic backup library (DLL). By default, it is not
    used. For more information about this library, see Note 142635. The
    settings for this are:
    -rwxr-xr-x <sid>adm sapsys ... libsbt.*"

  • Post/wait initialization failed

    Hi,
    Fail to startup an Oracle 8.1.5 on Solaris 8.
    The error message is:
    ORA-27146: post/wait initialization filed.
    Anyone can help?

    You ned to increase semaphores in etc/system file.Only root can change these values in Solaris.
    PUt the following parametrs sa given below or increase the existing values to march below values.
    These are the values in etc/system file you need to set to overcome your problem.hre you can go up to 200 processes.
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmseg=10
    set shmsys:shminfo_shmmni=100
    set semsys:seminfo_semmsl=210
    set semsys:seminfo_semmni=100
    set semsys:seminfo_semmns=510
    set semsys:seminfo_semopm=100
    set semsys:seminfo_semvmx=32767
    Hope this works for you
    null

  • Oracle Error :: ORA-27140  attach to post/wait facility failed

    Hi Guys...
    I have a problem when I connect to my database...
    I get the error mentioned above...
    What might be the problem?
    Please help!!!!!!!!!!!!!!!

    What are permissions to $ORACLE_HOME/bin?
    Should be something like this:
    ls -ld $ORACLE_HOME/bin
    drwxr-xr-x 2 oracle dba 8192 Jan 15 17:36 /u01/app/oracle/product/RDBMS10g/bin

  • Oracle Database 11.2 Post-Upgrade error: ORA-01658: unable to create INITIA

    Hi,
    While upgrading of database 11.1.0 to 11.2.0, i am getting the below errors.
    SQL> @$ORACLE_HOME/rdbms/admin/utlu112s.sql
    Oracle Database 11.2 Post-Upgrade Status Tool 12-28-2011 23:26:45
    Component Status Version HH:MM:SS
    Oracle Server
    . VALID 11.2.0.1.0 00:33:27
    JServer JAVA Virtual Machine
    . VALID 11.2.0.1.0 00:14:04
    Oracle Real Application Clusters
    . INVALID 11.2.0.1.0 00:00:01
    OLAP Analytic Workspace
    . VALID 11.2.0.1.0 00:00:40
    OLAP Catalog
    . VALID 11.2.0.1.0 00:02:00
    Oracle OLAP API
    . VALID 11.2.0.1.0 00:00:32
    Oracle Label Security
    . OPTION OFF 10.2.0.3.0 00:00:00
    Oracle Enterprise Manager
    . LOADING 00:00:00
    Oracle XDK
    . VALID 11.2.0.1.0 00:01:10
    Oracle Text
    . VALID 11.2.0.1.0 00:01:52
    Oracle XML Database
    . VALID 11.2.0.1.0 00:04:49
    Oracle Database Java Packages
    . VALID 11.2.0.1.0 00:00:28
    Oracle Multimedia
    . VALID 11.2.0.1.0 00:12:37
    Spatial
    . INVALID 11.2.0.1.0 00:09:51
    Oracle Application Express
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-00942: table or view does not exist
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-00942: table or view does not exist
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-00942: table or view does not exist
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . ORA-01658: unable to create INITIAL extent for segment in tablespace HTMLDB
    . INVALID 3.2.1.00.10 00:33:43
    Gathering Statistics
    . 00:44:43
    Total Upgrade Time: 02:40:35
    PL/SQL procedure successfully completed.
    Please help me on this.
    Thanks,

    Vinod Ranjan wrote:
    Hi sb92075,
    Thanks for quick update,
    So is this related error is related to HTMLDB tablespace ?yes
    >
    Is this solution will workout?It depends upon actual size of new datafile added.
    So do as directed & report the results.
    What is current size of HTMLDB datafiles?
    >
    + Use ALTER TABLESPACE ADD DATAFILE to add additional space to the+
    + tablespace or retry with a smaller value for INITIAL +
    Thanks,
    Edited by: Vinod Ranjan on 31 Dec, 2011 7:43 AM

  • IMPDP Help needed please...ORA-39083: Object type PROCOBJ failed to create

    OS=Win2003
    DB=10gR2
    Version = 102.0.4
    Hi,
    I am running a impdp on a 30gb file and well it seems to have gone fine (much faster then it normally does to be honest), but towards the end it fails, and when researching this error, it seems to be very vague and I was wondering if someone can help me. Below is the log, but I have taken parts out of it that are not relevant.
    Import: Release 10.2.0.4.0 - Production on Wednesday, 16 April, 2008 15:22:18
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."IMPGEMDEV041608" successfully loaded/unloaded
    Starting "SYSTEM"."IMPGEMDEV041608": system/********@iworksdb directory=DATA_PUMP_DIR dumpfile=expdpgemdev.dmp job_name=impgemdev041608 TABLE_EXISTS_ACTION=APPEND SCHEMAS=GEMDEV LOGFILE=IMPIWORKS_BOON.log REMAP_SCHEMA=GEMDEV:IWORKS REMAP_TABLESPACE=IWORKS_INDEX:IWORKS_IDX REMAP_TABLESPACE=IWORKS_IOT:IWORKS_IDX REMAP_TABLESPACE=IWORKS_TABLES:IWORKS_TABLES EXCLUDE=GRANT exclude=statistics STREAMS_CONFIGURATION=N
    Processing object type SCHEMA_EXPORT/USER
    ORA-31684: Object type USER:"IWORKS" already exists
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/TYPE/TYPE_SPEC
    ORA-31684: Object type TYPE:"IWORKS"."T_NUMBER_TAB" already exists
    ORA-31684: Object type TYPE:"IWORKS"."T_VARCHAR2_TAB" already exists
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39152: Table "IWORKS"."SYS_TOKENTYPE" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-31684: Object type PACKAGE:"IWORKS"."CONT_FEE_DEF_UC" already exists
    ORA-31684: Object type PACKAGE:"IWORKS"."COPAYCALCFLAG" already exists
    ORA-31684: Object type VIEW:"IWORKS"."VWTREE" already exists
    ORA-31684: Object type VIEW:"IWORKS"."V_ROUTE_DTL_GROUP" already exists
    Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCOBJ
    ORA-39083: Object type PROCOBJ failed to create with error:
    ORA-06550: line 2, column 11:
    PLS-00103: Encountered the symbol "VARCHAR2" when expecting one of the following:
    := . ( @ % ;
    The symbol ":=" was substituted for "VARCHAR2" to continue.
    ORA-06550: line 3, column 12:
    PLS-00103: Encountered the symbol "VARCHAR2" when expecting one of the following:
    := . ( @ % ;
    The symbol ":=" was substituted for "VARCHAR2" to continue.
    ORA-06550: line 4, column 19:
    PLS-00103: Encountered the symbol "VARCHAR
    ORA-39083: Object type PROCOBJ failed to create with error:
    ORA-06550: line 6, column 16:
    PLS-00103: Encountered the symbol "RAYSQLACCESS9889405" when expecting one of the following:
    * & = - + ; < / > at in is mod remainder not rem
    <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
    LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
    The symbol "* was inserted before "RAYSQLACCESS9889405" to continue.
    ORA-06550: line 7, column 17:
    PLS-00103: Encountered the symbol "SQL" when expectin
    Job "SYSTEM"."IMPGEMDEV041608" completed with 2831 error(s) at 15:30:37
    Any help will be much appreciated

    I can not seem to find any object named PROCOBJ.
    As for the object called RAYSQLACCESS9889405...no idea what this is.
    I checked the source for any invalid objects and none.

  • ORA-39083: Object type TRIGGER failed to create with error:

    i m getting these two error when i import data using impdp.
    ORA-39083: Object type TRIGGER failed to create with error:
    ORA-00942: table or view does not exist
    i have exported (expdp) data from production db, when i importing (impdp) the dump file to the test db i m geting the above two errors.
    example:
    ORA-39083: Object type TRIGGER failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    CREATE TRIGGER "NEEDLE"."CC_BCK_TRG" BEFORE INSERT OR UPDATE
    ON NIIL.cc_bck_mgmt REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
    DECLARE
    w_date DATE;
    w_user VARCHAR2(10);
    BEGIN
    SELECT USER,SYSDATE INTO w_user,w_date FROM DUAL;
    IF INSERTING THEN
    :NEW.cretuser :=w_user;
    :NEW.cretdate :=w_date;
    END IF;
    IF UPDATING THEN
    :NEW.modiuser :=w_user;
    :NEW.modidate :=w_date;
    END IF;
    END;
    status of the above trigger in pro db is valid. and source table also exist even though i m getting error when i import
    please suggest me...

    perhaps you don't have table... (impdp created trigger before create table)
    check about "NIIL.cc_bck_mgmt" table.
    and then create it (trigger) manual ;)
    Good Luck.

  • Oracle10g Import:ORA-01119: error in creating database

    I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
    This is the import command i'm trying:
    imp db/db@sid file=file.dmp ignore=y full=y
    But it still posts the following error:
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.02.01 via conventional path
    Warning: the objects were exported by OPS$QZORA, not by you
    import done in US7ASCII character set and AL16UTF16 NCHAR character set
    import server uses WE8ISO8859P1 character set (possible charset conversion)
    export client uses UTF8 character set (possible charset conversion)
    . importing SYSTEM's objects into SYSTEM
    IMP-00017: following statement failed with ORACLE error 1119:
    "CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
    "bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
    "qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
    " , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
    "bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
    "1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
    "E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
    "mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
    "00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
    "' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
    "EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
    IMP-00003: ORACLE error 1119 encountered
    ORA-01119: error in creating database file '/home/NEW01.dbf'
    ORA-27040: file create error, unable to create file
    SVR4 Error: 2: No such file or directory
    IMP-00000: Import terminated unsuccessfully

    Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
    I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
    If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
    thanks in advance
    shiva

  • 11gR2 Gateway got ORA-28547: connection to server failed

    I am seting up a heterogeneous connection between 11gR2 and SQL Server, when i'm trying to connect through gateway, got this:
    sys@FUNNY>conn user/password@dg4odbc
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    then i am trying to create a database link:
    sys@FUNNY>create public database link xyz connect to "user" identified by "password" using 'dg4odbc';
    Database link created.
    sys@FUNNY>select count(*) from dimtime@xyz;
    select count(*) from dimtime@xyz
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    The DSN works fine:
    oracle@vm-sles10:/usr/local/easysoft/unixODBC/bin> ./isql oakdw user password
    Connected!
    SQL> select count(*) from dimtime;
    | 1096 |
    SQLRowCount returns -1
    1 rows fetched
    SQL>
    tnsping seems fine too:
    oracle@vm-sles10:~> tnsping dg4odbc
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS= (PROTOCOL=TCP) (HOST=localhost) (PORT=1522)) (CONNECT_DATA= (SID=dg4odbc)) (HS=OK))
    OK (10 msec)
    Here are some config files:
    initdg4odbc.ora:
    HS_FDS_CONNECT_INFO = OAKDW
    HS_FDS_TRACE_LEVEL =1
    HS_FDS_SHAREABLE_NAME = /opt/ConnectforODBC60/lib/ivsqls24.so
    set ODBCINI=/opt/ConnectforODBC60/odbc.ini
    listener.ora:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    ADR_BASE_LISTENER = /opt/oracle
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=dg4msql)
    (ORACLE_HOME=/opt/oracle/product/11.2/db_1/)
    (PROGRAM=dg4msql)
    (SID_DESC=
    (SID_NAME=dg4odbc)
    (ORACLE_HOME=/opt/oracle/product/11.2/db_1)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/ConnectforODBC60/lib:/opt/oracle/product/11.2/db_1/lib)
    sqlnet.ora:
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    SQLNET.AUTHENTICATION_SERVICES=(NONE)
    ADR_BASE = /opt/oracle
    tnsnames.ora:
    FUNNY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = funny)
    LISTENER_FUNNY =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    dg4odbc=
    (DESCRIPTION=
    (ADDRESS=
    (PROTOCOL=TCP)
    (HOST=localhost)
    (PORT=1522)
    (CONNECT_DATA=
    (SID=dg4odbc)
    (HS=OK)
    Server OS is SLES 10 sp2, ODBC driver is Datadirect ODBC 6.0
    First time asking for help here, don't know if my description is clear.
    Any clue, guys?
    Edited by: user6299342 on Nov 11, 2009 2:12 PM

    sys@FUNNY>select count(*) from dimtime@xyz;
    select count(*) from dimtime@xyz
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Could you post the complete error stack?
    If I am allowed to guess here, check if yours is the same case as described in MOS note 849051.1

  • ORA-01658: unable to create INITIAL extent for segment in tablespace

    NEW REPOSITORY INSTALLATION ERROR!!
    I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
    After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
    After pressing the Install button in the RAU:
    -I take public synonyms
    -I scheck the box for "Support Designer Objects", then
    -The Repository size is Medium
    -I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
    After Starting, the Installation began an stop by installing some Tables like schown :
    Operation: Started : 07/03/04 20:26:32
    Reading File: cktabs.sql
    Object : TABLE CDDL_TMP_TBL
    Executing statement(s)...
    Verifying...
    .and so on till....uns so weiter bis
    Reading File: cktabs.sql
    Object : TABLE RM$INFO
    Executing statement(s)...
    Error Submitting Definition: User intervention required...
    RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
    ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
    Dumping Buffer...
    CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    ...End of Buffer
    User Requested: Stop Process
    When I read the Help of the Error the
    CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
    ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
    I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
    -pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
    -And the installato still stop with the same Error.
    Question: How schould I resolve this Configuration?
    You could respond in ENGLICH, GERMAN or FRENCH
    Thank you for your Help!

    You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
    Regards
    Sue

  • ORA-01180: can not create datafile 1 during RMAN restore.

    Hello,
    I am trying to refresh one of our QA environments and I am getting this error message:
    RMAN> run
    2> {
    3> allocate channel c1 device type disk;
    4> allocate channel c2 device type disk;
    5> restore database;
    6> recover database;
    7> }
    allocated channel: c1
    channel c1: SID=5 device type=DISK
    allocated channel: c2
    channel c2: SID=131 device type=DISK
    Starting restore at 08-NOV-12
    using channel ORA_DISK_1
    creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 11/08/2012 16:27:40
    ORA-01180: can not create datafile 1
    ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
    RMAN> shutdown immediate
    using target database control file instead of recovery catalog
    database dismounted
    Oracle instance shut down
    RMAN> startup nomount
    connected to target database (not started)
    Oracle instance started
    Total System Global Area 534462464 bytes
    Fixed Size 2228200 bytes
    Variable Size 176160792 bytes
    Database Buffers 348127232 bytes
    Redo Buffers 7946240 bytes
    RMAN> set dbid=3573460394
    executing command: SET DBID
    RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
    Starting restore at 08-NOV-12
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=130 device type=DISK
    channel ORA_DISK_1: restoring control file
    channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
    +output file name=+DATA1/alephpr/controlfile/current.260.798747585+
    +output file name=+FLASH/alephpr/controlfile/current.276.798747585+
    Finished restore at 08-NOV-12
    RMAN> alter database mount;
    database mounted
    released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
    RMAN> crosscheck backup;
    Crosschecked 48 objects
    RMAN> delete noprompt expired backup;
    Deleted 48 EXPIRED objects
    RMAN> list backup summary;
    specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
    RMAN> catalog start with '/restorealeph/';
    searching for all files that match the pattern /restorealeph/
    List of Files Unknown to the Database
    =====================================
    File Name: /restorealeph/9cnpm51u_1_1
    File Name: /restorealeph/9enpm6lj_1_1
    File Name: /restorealeph/c-3573460394-20121107-00
    File Name: /restorealeph/c-3573460394-20121107-01
    File Name: /restorealeph/c-3573460394-20121106-01
    Do you really want to catalog the above files (enter YES or NO)? YES
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: /restorealeph/9cnpm51u_1_1
    File Name: /restorealeph/9enpm6lj_1_1
    File Name: /restorealeph/c-3573460394-20121107-00
    File Name: /restorealeph/c-3573460394-20121107-01
    File Name: /restorealeph/c-3573460394-20121106-01
    RMAN> list backup summary;
    List of Backups
    ===============
    Key     TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
    4097    B  F  A DISK        07-NOV-12       1       1       NO         BACKUP_ALEPHPR.TUR_110712030000
    4098    B  A  A DISK        07-NOV-12       1       1       NO         BACKUP_ALEPHPR.TUR_110712030000
    RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
    List of Backup Sets
    ===================
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    4097    Full    178.04G    DISK        00:00:00     07-NOV-12
            BP Key: 4097   Status: AVAILABLE  Compressed: NO  Tag: BACKUP_ALEPHPR.TUR_110712030000
            Piece Name: /restorealeph/9cnpm51u_1_1
      List of Datafiles in backup set 4097
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
      2       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
      3       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
      4       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
      5       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
      6       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
      7       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
      8       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
      9       Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
      10      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
      11      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
      12      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
      13      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
      14      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
      15      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
      16      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
      17      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
      18      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
      19      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
      26      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
      27      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
      28      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
      29      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
      30      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
      31      Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
    BS Key  Size       Device Type Elapsed Time Completion Time
    4098    16.89G     DISK        00:00:00     07-NOV-12
            BP Key: 4098   Status: AVAILABLE  Compressed: NO  Tag: BACKUP_ALEPHPR.TUR_110712030000
            Piece Name: /restorealeph/9enpm6lj_1_1
      List of Archived Logs in backup set 4098
      Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
      1    35722   6919870864350 06-NOV-12 6919871887697 06-NOV-12
      1    35723   6919871887697 06-NOV-12 6919872372211 06-NOV-12
      1    35724   6919872372211 06-NOV-12 6919872410158 06-NOV-12
      1    35725   6919872410158 06-NOV-12 6919872447301 06-NOV-12
      1    35726   6919872447301 06-NOV-12 6919872503332 06-NOV-12
      1    35727   6919872503332 06-NOV-12 6919872551564 06-NOV-12
      1    35728   6919872551564 06-NOV-12 6919872603881 06-NOV-12
      1    35729   6919872603881 06-NOV-12 6919872655942 06-NOV-12
      1    35730   6919872655942 06-NOV-12 6919872698722 06-NOV-12
      1    35731   6919872698722 06-NOV-12 6919872741655 06-NOV-12
      1    35732   6919872741655 06-NOV-12 6919872782284 06-NOV-12
      1    35733   6919872782284 06-NOV-12 6919872872302 06-NOV-12
      1    35734   6919872872302 06-NOV-12 6919872910206 06-NOV-12
      1    35735   6919872910206 06-NOV-12 6919872945577 06-NOV-12
      1    35736   6919872945577 06-NOV-12 6919872980056 06-NOV-12
      1    35737   6919872980056 06-NOV-12 6919873013411 06-NOV-12
      1    35738   6919873013411 06-NOV-12 6919873050761 06-NOV-12
      1    35739   6919873050761 06-NOV-12 6919873084996 06-NOV-12
      1    35740   6919873084996 06-NOV-12 6919873122049 06-NOV-12
      1    35741   6919873122049 06-NOV-12 6919873521767 06-NOV-12
      1    35742   6919873521767 06-NOV-12 6919873952773 06-NOV-12
      1    35743   6919873952773 06-NOV-12 6919874258549 06-NOV-12
      1    35744   6919874258549 06-NOV-12 6919874472213 06-NOV-12
      1    35745   6919874472213 06-NOV-12 6919874744856 06-NOV-12
      1    35746   6919874744856 06-NOV-12 6919875113086 06-NOV-12
      1    35747   6919875113086 06-NOV-12 6919875733337 06-NOV-12
      1    35748   6919875733337 06-NOV-12 6919876139061 06-NOV-12
      1    35749   6919876139061 06-NOV-12 6919876707162 06-NOV-12
      1    35750   6919876707162 06-NOV-12 6919877706313 06-NOV-12
      1    35751   6919877706313 06-NOV-12 6919877919039 06-NOV-12
      1    35752   6919877919039 06-NOV-12 6919878024429 06-NOV-12
      1    35753   6919878024429 06-NOV-12 6919878107673 06-NOV-12
      1    35754   6919878107673 06-NOV-12 6919878258511 06-NOV-12
      1    35755   6919878258511 06-NOV-12 6919878308336 06-NOV-12
      1    35756   6919878308336 06-NOV-12 6919878424419 06-NOV-12
      1    35757   6919878424419 06-NOV-12 6919878488485 06-NOV-12
      1    35758   6919878488485 06-NOV-12 6919878827092 06-NOV-12
      1    35759   6919878827092 06-NOV-12 6919879350098 07-NOV-12
      1    35760   6919879350098 07-NOV-12 6919879675556 07-NOV-12
      2    35949   6919870864360 06-NOV-12 6919871494640 06-NOV-12
      2    35950   6919871494640 06-NOV-12 6919871887487 06-NOV-12
      2    35951   6919871887487 06-NOV-12 6919872410655 06-NOV-12
      2    35952   6919872410655 06-NOV-12 6919872552468 06-NOV-12
      2    35953   6919872552468 06-NOV-12 6919872698940 06-NOV-12
      2    35954   6919872698940 06-NOV-12 6919872872690 06-NOV-12
      2    35955   6919872872690 06-NOV-12 6919872980371 06-NOV-12
      2    35956   6919872980371 06-NOV-12 6919873085902 06-NOV-12
      2    35957   6919873085902 06-NOV-12 6919873569082 06-NOV-12
      2    35958   6919873569082 06-NOV-12 6919873949096 06-NOV-12
      2    35959   6919873949096 06-NOV-12 6919874404640 06-NOV-12
      2    35960   6919874404640 06-NOV-12 6919875011814 06-NOV-12
      2    35961   6919875011814 06-NOV-12 6919875631429 06-NOV-12
      2    35962   6919875631429 06-NOV-12 6919876324885 06-NOV-12
      2    35963   6919876324885 06-NOV-12 6919876363526 06-NOV-12
      2    35964   6919876363526 06-NOV-12 6919876748508 06-NOV-12
      2    35965   6919876748508 06-NOV-12 6919877741784 06-NOV-12
      2    35966   6919877741784 06-NOV-12 6919878108943 06-NOV-12
      2    35967   6919878108943 06-NOV-12 6919878424477 06-NOV-12
      2    35968   6919878424477 06-NOV-12 6919879012111 06-NOV-12
      2    35969   6919879012111 06-NOV-12 6919879260589 07-NOV-12
      2    35970   6919879260589 07-NOV-12 6919879350086 07-NOV-12
      2    35971   6919879350086 07-NOV-12 6919879464935 07-NOV-12
      2    35972   6919879464935 07-NOV-12 6919879548399 07-NOV-12
      2    35973   6919879548399 07-NOV-12 6919879675564 07-NOV-12
    RMAN> list incarnation;
    List of Database Incarnations
    DB Key  Inc Key DB Name  DB ID            STATUS  Reset SCN  Reset Time
    1       1       ALEPHPR  3573460394       PARENT  1          13-MAY-10
    2       2       ALEPHPR  3573460394       PARENT  2229467    28-JUN-10
    3       3       ALEPHPR  3573460394       CURRENT 6918261828355 26-SEP-12The ASM structure is created...
    ASMCMD> lsdg
    State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
    MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
    MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
    ASMCMD> cd DATA1/ALEPHPR/DATAFILE
    ASMCMD> pwd
    +DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
    Any idea?
    Thanks
    Martin
    Edited by: martin.morono on Nov 8, 2012 11:19 AM
    Edited by: martin.morono on Nov 8, 2012 11:49 AM

    Thanks Levi,
    I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
    No luck. The error message is different but the result is the same... it keeps failing.
    RMAN> run {
    2> allocate channel c1 device type disk;
    3> allocate channel c2 device type disk;
    4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
    5> startup mount;
    6> catalog start with '/restorealeph/';
    7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
    8> }
    allocated channel: c1
    channel c1: SID=191 device type=DISK
    allocated channel: c2
    channel c2: SID=131 device type=DISK
    Starting restore at 09 NOV 2012 13:11:09
    channel c2: skipped, AUTOBACKUP already found
    channel c1: restoring control file
    channel c1: restore complete, elapsed time: 00:00:15
    output file name=+DATA1/alephpr/controlfile/current.260.798747585
    output file name=+FLASH/alephpr/controlfile/current.276.798747585
    Finished restore at 09 NOV 2012 13:11:24
    database is already started
    database mounted
    Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
    Crosschecked 52 objects
    Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
    Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
    Crosschecked 2 objects
    Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
    searching for all files in the recovery area
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
    File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
    File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
    searching for all files that match the pattern /restorealeph/
    List of Files Unknown to the Database
    =====================================
    File Name: /restorealeph/9cnpm51u_1_1
    File Name: /restorealeph/9enpm6lj_1_1
    File Name: /restorealeph/c-3573460394-20121107-00
    File Name: /restorealeph/c-3573460394-20121107-01
    File Name: /restorealeph/c-3573460394-20121106-01
    Do you really want to catalog the above files (enter YES or NO)? YEs
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: /restorealeph/9cnpm51u_1_1
    File Name: /restorealeph/9enpm6lj_1_1
    File Name: /restorealeph/c-3573460394-20121107-00
    File Name: /restorealeph/c-3573460394-20121107-01
    File Name: /restorealeph/c-3573460394-20121106-01
    Starting restore at 09 NOV 2012 13:11:48
    released channel: c1
    released channel: c2
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 11/09/2012 13:11:48
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 31 found to restore
    RMAN-06023: no backup or copy of datafile 30 found to restore
    RMAN-06023: no backup or copy of datafile 29 found to restore
    RMAN-06023: no backup or copy of datafile 28 found to restore
    RMAN-06023: no backup or copy of datafile 27 found to restore
    RMAN-06023: no backup or copy of datafile 26 found to restore
    RMAN-06023: no backup or copy of datafile 19 found to restore
    RMAN-06023: no backup or copy of datafile 18 found to restore
    RMAN-06023: no backup or copy of datafile 17 found to restore
    RMAN-06023: no backup or copy of datafile 16 found to restore
    RMAN-06023: no backup or copy of datafile 15 found to restore
    RMAN-06023: no backup or copy of datafile 14 found to restore
    RMAN-06023: no backup or copy of datafile 13 found to restore
    RMAN-06023: no backup or copy of datafile 12 found to restore
    RMAN-06023: no backup or copy of datafile 11 found to restore
    RMAN-06023: no backup or copy of datafile 10 found to restore
    RMAN-06023: no backup or copy of datafile 9 found to restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
    THanks again for your help.
    Regards.
    Martin
    Edited by: martin.morono on Nov 9, 2012 7:21 AM

  • Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    i am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    i exported the application from apex.oracle.com and imported it to our environment
    import went fine, but when I ran the IR page I got
    ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
    evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
    while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
    however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

  • Post install checks failed for DBC file - Oracle App11.5.10.2 Linux  5.3

    Hi everybody,
    I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
    The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
    DBC generation failed with exit code 127
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
    DBC generation failed with exit code 127
    Updating Server Security Authentication
    Updating Server Security Authentication failed with exit code 127
    adgendbc.sh exiting with status 127
    ERRORCODE = 127 ERRORCODE_END
    .end std out.
    touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    .end err out.
    Thanks in advance.
    sreejith

    Welcome to the forums !
    Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
    HTH
    Srini

  • ORA:01658 Unable to create initial extent error

    Gurus,
    While importing a .dmp file I am getting following error
    IMP-00003 : Oracle error 1658 encountered
    ORA-01658: Unable to create INTIAL EXTENT for segment in tablespace INDX
    IMP-000017: following statement failed with ORacle error 1658:
    " CREATE INDEX "CSDT_RQS_INDEX" ON CSDT" ( "BASE_MASTER_KEY")PCTFREE 10 INTRANS 2 MAXTRANS 255 STORAGE(INTIAL 7864320 NEXT 131072 MINEXTENTS 1 MAEXTENTS 4096 PCTINCREASE 0 FREELISTS GROUPS1 BUFFER_POOL DEFAULT
    TABLSPACE "INDX" lOGGING.
    Please help to figure out what's wrong?
    Thanks in advance.

    With this SQL Statement you can find out the spaces in tablespaces.
    SQL> select u.tblspc "TBLSPC", a.fbytes "ALLOC", u.ebytes USED, a.fbytes-u.ebytes UNUSED,
    2 (u.ebytes/a.fbytes)*100 USEDPCT
    3 from (select tablespace_name tblspc, sum(bytes) ebytes
    4 from sys.dba_extents
    5 group by tablespace_name) u,
    6 (select tablespace_name tblspc, sum(bytes) fbytes
    7 from sys.dba_data_files
    8 group by tablespace_name) a
    9 where u.tblspc = a.tblspc
    10 ;
    TBLSPC ALLOC USED UNUSED USEDPCT
    CARTEST_DATA 891289600 488701952 402587648 54,8308824
    CARTEST_IDX 83886080 46465024 37421056 55,390625
    CARTMPTEST_DATA 41943040 26935296 15007744 64,21875
    RBS 541065216 104857600 436207616 19,379845
    SYSTEM 471859200 373547008 98312192 79,1649306
    TEMP 209715200 58654720 151060480 27,96875
    6 rows selected.
    SQL>
    Joel Pérez
    http://otn.oracle.com/experts

Maybe you are looking for