ORA-30999: XML context creation failed while acquiring XVM resources
Hi,
One of our user just reported an ORA-30999 and google and metalink searches did not bring any help.
insert into os_archive_order (cOrder_ID, cOrder_Type, nBranch, bIndexed, dArchived,
dProcessed, cOrder_Content, cXmlVersion)
VALUES ( ?, ?, ?, 0, sysdate, null, SYS.XMLTYPE.CreateXML(?), ?)and the xml look like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<Object id ='1.7777.999999' xmlns:arc='http://otms.ch/archiving/vers/2002/09/01' >
</Object>The error is returned from the application (jdbc I suppose) and is not reproducible within sqlplus.
How would you proceed to help the user?
Cheers
Laurent
Edited by: Laurent Schneider on Oct 18, 2011 12:50 PM
it used to work fine in 10g (at least it has never been reported) and now we just migrated to 11.2.0.2/AIX
What happens if you use
insert into os_archive_order (cOrder_ID, cOrder_Type, nBranch, bIndexed, dArchived,
dProcessed, cOrder_Content, cXmlVersion)
VALUES ( ?, ?, ?, 0, sysdate, null,XMLTYPE(?), ?)BTW did the storage datatype of XMLType "cXmlVersion" switch from datatype XMLType CLOB storage to XMLType Binary XML Securefile storage(new default in 11.2.0.2)
Edited by: Marco Gralike on Oct 19, 2011 3:40 PM
Similar Messages
-
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
XML Publisher Report Fails While using Pivot Table in R12 Oracle EBS
Hello All,
Need your help. I am trying to create a report with a Pivot table. I have created the .rtf file using the Oracle BI Publisher Template Builder for word 10.1.3.4.1. the data comes correctly in preview but when i register it in EBS and run the concurrent program it competes in warning and no output is displayed.
The error message looks like as follows.
[9/3/10 4:03:17 PM] [19934:RT444621] Executing post-processing actions for request 444621.
[9/3/10 4:03:17 PM] [19934:RT444621] Starting XML Publisher post-processing action.
[9/3/10 4:03:17 PM] [19934:RT444621]
Template code: XXECOHCGEN
Template app: XXECO
Language: en
Territory: 00
Output type: EXCEL
[9/3/10 4:03:31 PM] [19934:RT444621] Output file was found but is zero sized - Deleted
[9/3/10 4:03:31 PM] [UNEXPECTED] [19934:RT444621] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:45)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:599)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'crosstab' used but not declared.
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 17 more
would appreciate some pointers to fix this issue.
Regards,
Abhijeet K
Edited by: Abhijeet K on Sep 3, 2010 8:10 AMHI, was there a Solution Ever found for this post other than the Workaround.
I am at the Same issue now, Any Valuable inputs will Help me finish my Report ASAP, becos currently this is my only Show stopper
we have Oracle Apps R12 realease 12.1.3 we use XMLpublisher built in R12
The issue i have is .
I created a XMLPublisher Report using PIVOT TABLE i would like to have my output to be in Excel, When i Preview it works fine, when i execute via Concurrent Program it gives the Following Log file
XXTPC Custom Application: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
TPC_ITEM_COUNT_RPT module: TPC ITEM COUNT RPT
Current system time is 25-JUN-2012 11:00:39
XDO Data Engine Version No: 5.6.3
Resp: 21676
Org ID : 101
Request ID: 2149483
All Parameters: report_name=RUN BY ORDER TYPE:org_name=HQF:org_choice=TPC US:item_selection=1001:order_type=k-us:pstatus=entered,waved,notwaved,shipped:transit_days=:first_receipt_date=01-jun-2012:last_receipt_date=22-jun-2012
Data Template Code: TPC_ITEM_COUNT_RPT
Data Template Application Short Name: XXTPC
Debug Flag: N
{first_receipt_date=01-jun-2012, org_choice=TPC US, item_selection=1001, report_name=RUN BY ORDER TYPE, pstatus=entered,waved,notwaved,shipped, org_name=HQF, last_receipt_date=22-jun-2012, order_type=k-us, transit_days=}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
29148
------------- 1) PUBLISH -------------
Beginning post-processing of request 2149483 on node HQTERPAS1LX at 25-JUN-2012 11:00:51.
Post-processing of request 2149483 failed at 25-JUN-2012 11:00:52 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 25-JUN-2012 11:00:52
I have requested my DBA to get me the OPP file..
Thanks in advance for any solution. -
Hi
I am writing following code to connect to a MQ.
import javax.jms.QueueConnectionFactory;
import javax.naming.Context;
import javax.naming.InitialContext;
class qConnect{
public static void main(String[] args){
try{
Context ctx = new InitialContext();
QueueConnectionFactory queueConnectionFactory =
(QueueConnectionFactory) ctx.lookup("QueueConnectionFactory");
}catch(Exception e){
e.printStackTrace();
while creating context instace it is giving me following error.
javax.naming.CommunicationException: Can't find SerialContextProvider
at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:60)
at com.sun.enterprise.naming.SerialContext.<init>(SerialContext.java:79)
at com.sun.enterprise.naming.SerialInitContextFactory.getInitialContext(SerialInitContextFactory.java:54)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:178)
at qConnect.main(qConnect.java:11)
what is a solution ??
Thanks in advance.
Tushar.u have to specify the provider url which contains the location of the provider and also the type of the provider such as file,ldap or ..
there in the jmsadmin.config file -
XML parsing failed while select from my table with criteria
While select from my table an error displayed as
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/<XML Path>/row[c24="SA0010001"]'
select * from category
where existsNode(xmlrecord, '/<XML Path>/row[c24="SA0010001"]') = 1;
xmlrecord
<row id="52843" xml:space="preserve">
<c1>Refund of Domestic Payment Order</c1>
<c2>Ref Dom Py Or</c2>
<c3>PLsql</c3>
<c20>1</c20>
<c21>62_TAABSINPUTT___OFS_TAABS</c21>
<c22>0803181605</c22>
<c23>62_TAABSINPUTT_OFS_TAABS</c23>
<c24>SA0010001</c24>
<c25>1</c25>
</row>Hi,
Did you copy that sample from some demo?
The part "<XML Path>" is meant to be replaced by a real XPath fragment.
Here, I think you may just want this :
select * from category
where existsNode(xmlrecord, '/row[c24="SA0010001"]') = 1;Edit : OK, just seen your previous post and the example given
Edited by: odie_63 on 6 juil. 2010 21:16 -
Getting "ORA-31011: XML parsing failed" using xmlAGG as rownum exceeds 1000
I have a following script which is working and creating xml output when the rownum < 1000, but as the rownum <2000 clause is used, it is throwing "ORA-31011: XML parsing failed" error.
There are about 2 million recirds that I need to extract in the xml file. Is there any way I can do that without creating 500 files?
I am new in XML DB and any help/suggestion/input will be highly appreciated.
Thanks.
---------------- script--------------------
SET SERVEROUTPUT ON
DECLARE
v_xml XMLTYPE;
v_blob BLOB;
v_data_length NUMBER;
-- Loop Control Variables
v_offset NUMBER DEFAULT 1;
v_chunk CONSTANT NUMBER DEFAULT 4000;
-- v_ctx DBMS_XMLGen.ctxHandle;
v_file Utl_File.File_Type;
BEGIN
-- Create XML context.
SELECT XMLELEMENT("COMBO_NETWORK", XMLAGG (IFC_BILL_LOC))
INTO v_xml
FROM (
SELECT XMLELEMENT
("CLAIM",
XMLFOREST(
ib.clm_num as "CLM_NUM",
NVL(ib.old_clm_num,' ') as "ALT_CLM_NUM",
DECODE(ib.clm_stat_cde,1,'OPEN','CLOSED') as "CLM_STATUS",
ib.SSN as "SSN",
ib.CLMT_LAST_NAM as "LAST_NAME",
ib.CLMT_FIRST_NAM as "FIRST_NAME",
TO_CHAR(ib.CLMT_DOB,'RRRRMMDD') as "DOB",
TO_CHAR(ib.CLMT_DOI,'RRRRMMDD') as "DOI",
ib.ER_NAM as "EMPLOYER_NAME",
sflo.cde AS "DISTRICT_OFFICE",
ib.ADD_UPDTE_DEL_FLG as "ADD_UPDATE_DELETE",
XMLFOREST(ib.CLMT_FST_LINE_ADR||' '||ib.CLMT_SND_LINE_ADR as "STREET",
ib.CLMT_CITY_ADR AS "CITY",
ib.CLMT_STATE_ADR as "STATE",
ib.CLMT_ZIP_CDE_ADR as "ZIP",
' ' as "PHONE" ) AS "CLAIMNT_ADDRESS",
DECODE(ib.CLMT_GENDER,1,'M',2,'F',' ') as "CLAIMNT_GENDER",
XMLFOREST(ib.ADJ_LAST_NAM as "LAST_NAME",
ib.ADJ_FIRST_NAM as "FIRST_NAME",
au.PHONE_NUM as "PHONE",
au.USER_EMAIL as "EMAIL") as "ADJUSTER",
NVL(ib.CATASTROPHE_FLG,'N') as "CATASTROPHE_FLAG"
IFC_BILL_LOC
FROM IFACE_BILL_CLAIM_TRANS ib, SCIF_LOCATIONS sflo, APPLICATION_USERS au
WHERE ib.comb_transmit_dte IS NULL
AND ib.SFLO_IDN = sflo.idn
AND ib.adj_last_nam = UPPER(au.user_last_nam)
AND ib.adj_first_nam = UPPER(au.user_first_nam)
AND sflo.cde = 'NF'
AND rownum < 1000); -- Failes parsing as rownum < 2000 is used.
-- Turn the XML into a BLOB
v_blob := v_xml.getblobval (1);
v_data_length := DBMS_LOB.getlength (v_blob);
-- Output XML document to file.
v_file := Utl_File.FOpen('/u08/test/testdev/interface/out', 'result1.xml', 'wb', v_chunk);
LOOP
EXIT WHEN v_offset > v_data_length;
UTL_FILE.put_raw (v_file, DBMS_LOB.SUBSTR (v_blob, v_chunk, v_offset),
TRUE);
v_offset := v_offset + v_chunk;
END LOOP;
Utl_File.FClose(v_file);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- We won't write any data, or even open the file,
-- if the query return no rows
NULL;
END;
--------------------- script end--------------------------
Following is the version of y database:
SQL> col comp_name format a45
SELECT comp_name, status, substr(version,1,10) as version
FROM dba_registry;
SQL> SQL> 2
COMP_NAME STATUS VERSION
Oracle Database Catalog Views VALID 10.2.0.4.0
Oracle Database Packages and Types VALID 10.2.0.4.0
JServer JAVA Virtual Machine VALID 10.2.0.4.0
Oracle Database Java Packages VALID 10.2.0.4.0
Oracle XDK VALID 10.2.0.4.0
Oracle XML Database VALID 10.2.0.4.0
6 rows selected.
SQL>Edited by: mdrake on Feb 4, 2010 3:55 PMIf you have the fix for bug 8246403 you can also control the behavoir with events. This avoids having to use explict translate operations on each column thay may contain bad data. Note this patch also has the effect of replacing the ORA-31011 error with the ORA-31061 error. Also note it is likely this error number will be changed again in the near future.
SQL> --
SQL> -- Replace with ?
SQL> --
SQL> alter session set events = '19119 trace name context forever, level 0x100000'
2 /
Session altered.
SQL> select xmlElement
2 (
3 "Result",
4 xmlAgg
5 (
6 xmlElement("Data",MY_DATA)
7 )
8 )
9 from T1
10 /
XMLELEMENT("RESULT",XMLAGG(XMLELEMENT("DATA",MY_DATA)))
<Result><Data>AAAA</Data><Data>BB?BB</Data><Data>CCCC</Data></Result>
SQL> --
SQL> -- Replace with Character Reference
SQL> --
SQL> alter session set events = '19119 trace name context forever, level 0x200000'
2 /
Session altered.
SQL> select xmlElement
2 (
3 "Result",
4 xmlAgg
5 (
6 xmlElement("Data",MY_DATA)
7 )
8 )
9 from T1
10 /
XMLELEMENT("RESULT",XMLAGG(XMLELEMENT("DATA",MY_DATA)))
<Result><Data>AAAA</Data><Data>BB�BB</Data><Data>CCCC</Data></Result>
SQL>
SQL> --
SQL> -- Remove Bad Characters
SQL> --
SQL> alter session set events = '19119 trace name context forever, level 0x400000'
2 /
Session altered.
SQL> select xmlElement
2 (
3 "Result",
4 xmlAgg
5 (
6 xmlElement("Data",MY_DATA)
7 )
8 )
9 from T1
10 /
XMLELEMENT("RESULT",XMLAGG(XMLELEMENT("DATA",MY_DATA)))
<Result><Data>AAAA</Data><Data>BBBB</Data><Data>CCCC</Data></Result>
SQL>
SQL>Edited by: mdrake on Feb 4, 2010 3:45 PM
Edited by: mdrake on Feb 4, 2010 3:46 PM
Edited by: mdrake on Feb 4, 2010 3:47 PM -
Calling Web Service from PL/SQL (ORA-31011: XML parsing failed)
hi all,
i want to invoke a web service from PL/SQL.
i found a soap_api package from "Tim Hall".
but it gives error in "ealtas.soap_api.invoke function"
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00007: unexpected end-of-file encountered
ORA-06512: at "SYS.XMLTYPE", line 48
ORA-06512: at "EALTAS.SOAP_API", line 135
ORA-06512: at line 44
set scan off;
declare
P_ADRES_WS VARCHAR2(100) := 'http://<host>:<port>/dswsbobje/qaawsservices/biws?wsdl=1&cuid=AVhBxL14I2dDjz8yFoznRLY';
P_ENVELOPE VARCHAR2(32767);
P_FNC VARCHAR2(256) := 'runQueryAsAService';
ol_req ealtas.soap_api.t_request;
ol_resp ealtas.soap_api.t_response;
message varchar2(500);
BEGIN
p_envelope := '<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:db="DB_SUBS_BUDGET">
<soapenv:Body>
<db:runQueryAsAService>
<db:login>DWH_BO</db:login>
<db:password>Pass1234</db:password>
</db:runQueryAsAService>
</soapenv:Body>
</soapenv:Envelope>
ol_req := ealtas.soap_api.new_request(P_FNC, 'xmlns="'||P_ADRES_WS||'"');
ol_resp := ealtas.soap_api.invoke(ol_req, P_ADRES_WS, p_fnc,P_ENVELOPE);
ealtas.soap_api.show_envelope(p_envelope);
message := ealtas.soap_api.get_return_value(ol_resp, 'Db_Timeid', 'xmlns:m="'||P_ADRES_WS||'"');
DBMS_OUTPUT.PUT_LINE('AAAA -'||message);
end;
thanks.
ealtas.AlexAnd thanks for your help.
ACL is ok.
can you help me about how can i edit this function. i tried many times but i could not do it :( .
web service url : <host>:<port>/dswsbobje/qaawsservices/biws?WSDL=1&cuid=AVhBxL14I2dDjz8yFoznRLY
what must be these variables values ?
l_url :=
l_namespace :=
l_method :=
l_soap_action :=
l_result_name :=
this is the xml;
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="DB_SUBS_BUDGET" xmlns:tns1="dsws.businessobjects.com" targetNamespace="DB_SUBS_BUDGET" xmlns="http://schemas.xmlsoap.org/wsdl/" name="queryasaservice">
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="DB_SUBS_BUDGET">
- <s:element name="runQueryAsAService">
- <s:complexType>
- <s:sequence>
<s:element name="login" type="s:string" />
<s:element name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="Row">
- <s:sequence>
<s:element name="Db_Timeid" type="s:string" nillable="true" />
<s:element name="Db_Tariff" type="s:string" nillable="true" />
<s:element name="Grossadds" type="s:double" nillable="true" />
<s:element name="Cancellations" type="s:double" nillable="true" />
<s:element name="Netadds" type="s:double" nillable="true" />
<s:element name="Subs" type="s:double" nillable="true" />
<s:element name="Churn_P" type="s:double" nillable="true" />
</s:sequence>
</s:complexType>
- <s:complexType name="Table">
- <s:sequence>
<s:element name="row" maxOccurs="unbounded" type="s0:Row" />
</s:sequence>
</s:complexType>
- <s:element name="runQueryAsAServiceResponse">
- <s:complexType>
- <s:sequence>
<s:element name="table" type="s0:Table" />
<s:element name="message" type="s:string" />
<s:element name="creatorname" type="s:string" />
<s:element name="creationdate" type="s:dateTime" />
<s:element name="creationdateformated" type="s:string" />
<s:element name="description" type="s:string" />
<s:element name="universe" type="s:string" />
<s:element name="queryruntime" type="s:int" />
<s:element name="fetchedrows" type="s:int" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="QaaWSHeader">
- <s:complexType>
- <s:sequence>
<s:element name="sessionID" type="s:string" minOccurs="0" maxOccurs="1" nillable="true" />
<s:element name="serializedSession" type="s:string" minOccurs="0" maxOccurs="1" nillable="true" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</types>
- <message name="runQueryAsAServiceSoapIn">
<part name="parameters" element="s0:runQueryAsAService" />
<part name="request_header" element="s0:QaaWSHeader" />
</message>
- <message name="runQueryAsAServiceSoapOut">
<part name="parameters" element="s0:runQueryAsAServiceResponse" />
</message>
- <portType name="QueryAsAServiceSoap">
- <operation name="runQueryAsAService">
<documentation>Get Web Service Provider server info</documentation>
<input message="s0:runQueryAsAServiceSoapIn" />
<output message="s0:runQueryAsAServiceSoapOut" />
</operation>
</portType>
- <binding name="QueryAsAServiceSoap" type="s0:QueryAsAServiceSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <operation name="runQueryAsAService">
<soap:operation soapAction="DB_SUBS_BUDGET/runQueryAsAService" style="document" />
- <input>
- <soap:header message="s0:runQueryAsAServiceSoapIn" part="request_header" use="literal">
<soap:headerfault message="s0:runQueryAsAServiceSoapIn" part="request_header" use="literal" />
</soap:header>
<soap:body use="literal" parts="parameters" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="DB_SUBS_BUDGET">
<documentation />
- <port name="QueryAsAServiceSoap" binding="s0:QueryAsAServiceSoap">
<soap:address location="http://<host>:<port>/dswsbobje/qaawsservices/queryasaservice?&cuid=AVhBxL14I2dDjz8yFoznRLY&authType=secEnterprise&locale=en_US&timeout=60&ConvertAnyType=false" />
</port>
</service>
</definitions> -
I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errorsPlease post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein -
Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered -
Ora-3136 then ksvcreate: Process(m000) creation failed and db hangs
Recently upgraded a large database from 10.2.0.4.0 to 10.2.0.5.0.
The database recevies many thousand short-lived connections per minute.
Since the upgrade we're repeatedly running into this problem
Symptoms are that the incoming sessions will start to time out with ora-3136, then the alert log will show
ksvcreate: Process(m000) creation failed
then finally existying connections will freeze and no more connections can be established. I can't even get in to shut the db down normally - i have to kill pmon to get to the point where i can restart it.
Typical alert log pattern:
Thu Feb 02 02:26:51 PST 2012
WARNING: inbound connection timed out (ORA-3136)
Thu Feb 02 02:31:21 PST 2012
ksvcreate: Process(m000) creation failed
Thu Feb 02 02:33:29 PST 2012
ksvcreate: Process(m000) creation failed
Thu Feb 02 02:35:36 PST 2012
kkjcre1p: unable to spawn jobq slave process
Thu Feb 02 02:35:36 PST 2012
Errors in file /scratch/jdevadf/oracle/product/10.2.0/admin/srg102/bdump/srg102_cjq0_5920.trc:
If i look in that file, i get this:
/scratch/jdevadf/oracle/product/10.2.0/admin/srg102/bdump/srg102_cjq0_5920.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /scratch/jdevadf/oracle/product/10.2.0
System name: Linux
Node name: dadvil0075
Release: 2.6.32-100.26.2.el5
Version: #1 SMP Tue Jan 18 20:11:49 EST 2011
Machine: x86_64
Instance name: srg102
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 5920, image: oracle@dadvil0075 (CJQ0)
*** 2012-02-01 21:34:08.175
*** SERVICE NAME:(SYS$BACKGROUND) 2012-02-01 21:34:08.149
*** SESSION ID:(3992.1) 2012-02-01 21:34:08.149
ssd_unwind_bp: unhandled instruction at 0x2fb3962 instr=f
*** 2012-02-02 02:34:29.355
Waited for process J001 to initialize for 60 seconds
*** 2012-02-02 02:34:29.362
Process diagnostic dump for J001, OS id=25477
loadavg : 5.22 3.75 3.36
Memory (Avail / Total) = 755.21M / 11706.12M
Swap (Avail / Total) = 1904.80M / 2047.34M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
0 S jdevadf 25477 1 0 80 0 - 680831 semtim 02:33 ? 00:00:00 ora_j001_srg102
Stack:
[Thread debugging using libthread_db enabled]
0x00000038556d5497 in semop () from /lib64/libc.so.6
#0 0x00000038556d5497 in semop () from /lib64/libc.so.6
#1 0x0000000003d91322 in sskgpwwait ()
#2 0x0000000003d73d7a in skgpwwait ()
#3 0x00000000007acf87 in kslges ()
#4 0x00000000007ac8f0 in kslgetl ()
#5 0x0000000000777a37 in kstipg ()
#6 0x0000000000813aaa in ksucrp ()
#7 0x0000000002498644 in kkjrdp ()
#8 0x00000000030b98c7 in opirip ()
#9 0x00000000013a4a2b in opidrv ()
#10 0x0000000001f9e66e in sou2o ()
#11 0x000000000072d2c5 in opimai_real ()
#12 0x000000000072d17c in main ()
A debugging session is active.
Inferior 1 [process 25477] will be detached.
Quit anyway? (y or n) [answered Y; input not from terminal]
Process diagnostic dump actual duration=1.190000 sec
(max dump time=30.000000 sec)
*** 2012-02-02 02:34:30.544
*** 2012-02-02 02:34:40.555
Waited for process J001 to initialize for 70 seconds
*** 2012-02-02 02:34:40.555
Process diagnostic dump for J001, OS id=25477
loadavg : 4.80 3.71 3.35
Memory (Avail / Total) = 728.61M / 11706.12M
Swap (Avail / Total) = 1904.81M / 2047.34M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
0 S jdevadf 25477 1 0 80 0 - 680831 semtim 02:33 ? 00:00:00 ora_j001_srg102
Stack:
[Thread debugging using libthread_db enabled]
0x00000038556d5497 in semop () from /lib64/libc.so.6
#0 0x00000038556d5497 in semop () from /lib64/libc.so.6
#1 0x0000000003d91322 in sskgpwwait ()
#2 0x0000000003d73d7a in skgpwwait ()
#3 0x00000000007acf87 in kslges ()
#4 0x00000000007ac8f0 in kslgetl ()
#5 0x0000000000777a37 in kstipg ()
#6 0x0000000000813aaa in ksucrp ()
#7 0x0000000002498644 in kkjrdp ()
#8 0x00000000030b98c7 in opirip ()
#9 0x00000000013a4a2b in opidrv ()
#10 0x0000000001f9e66e in sou2o ()
#11 0x000000000072d2c5 in opimai_real ()
#12 0x000000000072d17c in main ()
A debugging session is active.
Inferior 1 [process 25477] will be detached.
Quit anyway? (y or n) [answered Y; input not from terminal]
[repeated for several processes]
I can upload the files or they are available on the internal network.
Initially i thought it was bug 8426816, but that's supposed to be included in the 10.2.0.5.0 patchset.Hi;
Symptoms are that the incoming sessions will start to time out with ora-3136, then the alert log will show
ksvcreate: Process(m000) creation failedDid you check note Troubleshooting Guide (TSG) - ksvcreate: Process(xxxx) creation failed [ID 1379200.1] ?
Regard
Helios -
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing
Hi,
I am trying to update an already existing Sales Order through PO Change Inbound 860. When i am performing changes in the line quantity and scheduled ship date with operation code as "Update" then it is successfully updating the Order and also we are able to generate the POAck for the updated sales order lines. But when i am rejecting one of the PO change lines by checking rejected flag, then order is getting imported successfully(I mean sales order is getting updated successfully) but during the POAck Generation i.e. 865 its raising "*ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00103: Warning: document structure does not match DTD Error at line 1*" at XML Gateway. we are using XML Gateway to process the orders, can somebody help me to get rid of this issue. Thanks in advance.
Thanks,
Sunil ChauhanHi Kishan
Thanks for the reply.
Because this is an outbound transaction so i can not provide you the XML file as we are facing issue to generate the same. Also we are using oracle seeded PO outbound Ack map.
In addition i can provide you the DTD file.
<!-- ==================================================== -->
<!ENTITY % RESOURCES SYSTEM "oagis_resources.dtd">
%RESOURCES;
<!-- ==================================================== -->
<!ELEMENT ACKNOWLEDGE_PO_008 (CNTROLAREA, DATAAREA+)>
<!ATTLIST VERB
value CDATA #FIXED "ACKNOWLEDGE"
>
<!ATTLIST NOUN
value CDATA #FIXED "PO"
>
<!ATTLIST REVISION
value CDATA #FIXED "008"
>
<!ELEMENT DATAAREA (ACKNOWLEDGE_PO)
>
<!ELEMENT ACKNOWLEDGE_PO (POORDERHDR, POORDERLIN*)
>
<!ELEMENT POORDERHDR ((%DATETIME.DOCUMENT;)?, (%OPERAMT.EXTENDED.T;)?, POID, POTYPE, ACKREQUEST?, CONTRACTB?, CONTRACTS?, DESCRIPTN?, NOTES*, OPRAMTAUTH?, PORELEASE?, TAXWHEXMPT?, USERAREA?, ACKHEADER, ATTCHREF*, CHARGE*, PARTNER*, POTERM*)
>
<!ELEMENT ACKHEADER (SENDER, (%DATETIME.PROMDELV;)?, (%DATETIME.PROMSHIP;)?, ACKCODE, DESCRIPTN?, NOTES*, SALESORDID?, USERAREA?)
>
<!ELEMENT POTERM (DESCRIPTN?, TERMID?, ((DAYOFMONTH, PROXMONTH) | DAYSNUM), ((%OPERAMT.EXTENDED.T;) | (%QUANTITY.PERCENT;)), USERAREA?)
>
<!ELEMENT POORDERLIN ((%QUANTITY.ORDERED;), (%DATETIME.NEEDDELV;)?, (%OPERAMT.UNIT.T;)?, POLINENUM, DRAWING?, HAZRDMATL?, ITEMRV?, ITEMRVX?, NOTES*, PACKING?, POLNSTATUS?, TAXWHEXMPT?, ((DESCRIPTN, ITEM?, ITEMX?, UPC?) | (ITEM, ITEMX?, UPC?) | (ITEMX, UPC?) | (UPC)), USERAREA?, ACKLINE*, ATTCHREF*, CHARGE*, DISTRIBUTN*, PARTNER*, POTERM*, POSUBLINE*, POLINESCHD*)
>
<!ELEMENT ACKLINE ((%DATETIME.PROMDELV;)?, (%DATETIME.PROMSHIP;)?, (%QUANTITY.ORDERED;)?, ACKCODE, NOTES*, SALESORDID?, USERAREA?)
>
<!ELEMENT POSUBLINE ((%QUANTITY.ITEM;), DRAWING?, ITEMRV?, ITEMRVX?, PSBLINENUM?, ((DESCRIPTN, ITEM?, ITEMX?, UPC?) | (ITEM, ITEMX?, UPC?) | (ITEMX, UPC?) | (UPC)), USERAREA?)>
<!ELEMENT POLINESCHD ((%DATETIME.NEEDDELV;), (%QUANTITY.ORDERED;), DESCRIPTN?, PSCLINENUM?, USERAREA?)
>
Thanks,S
--Sunil -
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing L
Hi There,
I am trying to load XML data [Given Below] into a table using "Load XML Data" option.
<?xml version="1.0"?>
<ROWSET>
<ROW>
<ID>13</ID>
<TYPE_SEQ>8</TYPE_SEQ>
<TYPE>B749</TYPE>
<TYPE_DESC>B758</_TYPE_DESC>
<EFFECTIVE_FROM>2099-01-01</EFFECTIVE_FROM>
<EFFECTIVE_TO>2099-01-01</EFFECTIVE_TO>
<CREATED_BY>958344</CREATED_BY>
<CREATED_ON>2099-01-01</CREATED_ON>
<UPDATED_BY>172283</UPDATED_BY>
<UPDATED_ON>2099-01-01</UPDATED_ON>
</ROW>
</ROWSET>
It throws the following error.
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
Can any one advice the solution please.
-Sudheer.Hi Sudheer,
This is caused by the date format you are using. Probably it is not matching with your NLS settings. Check your NLS settings, what the date format is, and use that in the XML.
Check it with this code:
SELECT XMLELEMENT("date", sysdate) FROM dual;Make sure, you have your NLS_DATE settings in the same format.
Check it with:
SELECT * FROM v$nls_parameters WHERE parameter = 'NLS_DATE_FORMAT'And then make sure it is the same by setting for example:
ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD';Greetings,
Rutger -
Spatial query index creation fails with ORA-13282: failure on initializatio
Hi,
I have an Oracle 10g 10.2.0.5.0 database newly installed. Spatial index creation fails:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13282: failure on initialization of coordinate transformation
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
The script I am trying to run is:
Insert into USER_SDO_GEOM_METADATA
(TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
Values
('SOME_TABLE', 'geo',
"SDO_DIM_ARRAY"(
"SDO_DIM_ELEMENT"('X',600000,900000,0.001),
"SDO_DIM_ELEMENT"('Y',150000,400000,0.001)), 23700);
CREATE INDEX IX_GEO_SOME_TABLE ON SOME_TABLE (GEO) INDEXTYPE IS MDSYS.SPATIAL_INDEX ;
Earlier I had some issues with NLS settings in relation to Spatial, but in this particular case setting the NLS_LANG for AMERICAN_AMERICA does not help. I found this comment http://www.orafaq.com/forum/t/127312/2/ but would not like to hack around with MDSYS table content. Any help is highly appreciated.
Regards, TamasTamas,
1 . . .Are you indexing a table that already has geometries or an empty table?
. . . .If the former, do all the geometries in that table have the same (not NULL) SRID (23700)?
2 . .The link you posted suggests a parsing problem since in Hungarian (23700), the decimal seperator is a comma (not a period). Accordingly, I believe the edit to mdsys.sdo_cs_srs.WKTEXT would be:
PROJCS["HD72 / EOV", GEOGCS [ "HD72", DATUM ["Hungarian Datum 1972 (EPSG ID 6237)", SPHEROID ["GRS 1967 (EPSG ID 7036)", 6378160, 298,247167427]], PRIMEM [ "Greenwich", 0,000000 ], UNIT ["Decimal Degree", 0,01745329251994328]], PROJECTION ["Egyseges Orszagos Vetuleti (EPSG OP 19931)"], UNIT ["Meter", 1]]
^ ^ ^ Regards,
Noel -
[Oracle JDBC Driver][Oracle]ORA-31011: XML parsing failed
Hi,
I have got the following error when i tired to upload an XML file in my application. My application will insert the XML file in to Oracle 10g data base table. (Our DB server is Oracle 10g).
The error is as follows:-
[BEA][Oracle JDBC Driver][Oracle]ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00004: internal error "MultiChar overflow"
Error at line 20795
ORA-06512: at "SYS.XMLTYPE", line 254
ORA-06512: at line 1
The XML file contains more than 90,000 lines in it. Please help.
Thanks!
Siva K.Is this a specific problem with 10G release? We are using 10.2.0.4.0.
Using CLOB, We think that this may hit the performance of the application as we are using large XML files. -
URGENT HELP !!! ORA-31011: XML parsing failed
Hi,
Oracle 9.2.0.4
I've run into
ORA-31011: XML parsing failed ORA-19202: Error
occurred in XML processing LPX-00247: invalid
Document Type Declaration (DTD) Error at line 1
ORA-06512: at line 15
during updateXML operation under CLOB resource.
It seems to me, I can't update created resource
at all.
Is anybody knows the workaround ?
Please, help !!!
Thanks,
ViacheslavNo, it is an html file. For test purpose I've taken
welcome.html from ORACLE_HOME installation. Here are
my test:
declare
res0 bfile := BFILENAME('TEMPDIR', 'welcome.html');
res clob;
Amount INTEGER := 4000;
b BOOLEAN;
begin
Amount:=DBMS_LOB.getlength(res0);
DBMS_LOB.CREATETEMPORARY(res,TRUE);
DBMS_LOB.OPEN(res0, DBMS_LOB.LOB_READONLY);
DBMS_LOB.OPEN(res, DBMS_LOB.LOB_READWRITE);
DBMS_LOB.LOADFROMFILE(res, res0,Amount);
--DBMS_LOB.CLOSE(res0);
b:=DBMS_XDB.createresource
('/MyCONTENT/welcome.html',res);
commit;
end;
declare
res0 bfile := BFILENAME('TEMPDIR', 'welcome.html');
clob1 clob;
amt number := dbms_lob.lobmaxsize;
src_offset number := 1 ;
dst_offset number := 1 ;
lang_ctx number := dbms_lob.default_lang_ctx;
warning number;
Amount INTEGER := 4000;
begin
Amount:=DBMS_LOB.getlength(res0);
DBMS_LOB.CREATETEMPORARY(clob1 ,TRUE);
DBMS_LOB.OPEN(res0, DBMS_LOB.LOB_READONLY);
DBMS_LOB.OPEN(clob1 , DBMS_LOB.LOB_READWRITE);
-- DBMS_LOB.LOADFROMFILE(clob1 , res0,Amount);
dbms_lob.LOADCLOBFROMFILE(clob1 ,res0, amt, dst_offset,
src_offset,dbms_lob.default_csid, lang_ctx,warning) ;
UPDATE xdb.resource_view SET res=updatexml
(res,'/Resource/Contents/*',
WHERE any_path= '/MyCONTENT/welcome.html';
commit;
--dbms_lob.filecloseall() ;
end;
Maybe you are looking for
-
Firefox crashes on Windows 7 when printing to a Windows 7 network printer.
On Windows 7 running Firefox 3.6.10, I cannot print to a Windows 7 network printer. Firefox crashes every time as soon as I hit print. However, the situation is very specific. I can print from Windows XP using Firefox 3.6.10 to a Windows 7 network pr
-
Hp laserjet 3500 printing only one page
My HP Color Laserjet 3500 is printing but it only prints multiple pages of the first page of my document jobs. It doesn't matter how many pages in the print job, it only prints multiple copies of just the first page of the job. Even if it's just on
-
How to show only the wanted member in Journals?
Hi experts, I would like to know how i can limit the members of one dimension than can be choose when user creates a journal. I mean, i know that it exists the property Enable_JRN than permit show only member with this property to yes of one dimensio
-
HT201628 Is this legit? I dont want to loose all of my music?
If I delete my itunes like the support says will I loose my music? and does this fix the problem?
-
hi , if user is on leave, and he is not maintained the substitution. then wokitem go to in his inbox. for this problem how can i solve . i heard that workflow adminstrator can put subtitute for any user, how? if workitem already went to user inbox, h