ORA-39124 with expdp when attaching timestamp to dumpfile name

Hi all,
I want to attach a timestamp to dumpfiles produced by expdp. So I did:
DUMPFILE=SCOTT_`date '+%d_%m_%y_%H:%M:%S'`.dmp.
I tried the command line, I tried a parfile all with the same result "ORA-39124: dump file name "SCOTT_"'`date '+%d_%m_%y_%H%M%S'`'".dmp" contains an invalid substitution variable" (same with logfile).
No matter what I escaped and where I did use whatever quotation marks it always stayed the same (frustrating).
I did it with renameing the files (e.g. SCOTT.dmp) with os means after exporting.
What must be done (if at all possible) to have expdp and impdp create/accept dumpfiles of the sort mentioned above?
Any help appreciated.
FJH

Hi Srini,
you are almost right. The problem is the colon (probably because expdp uses colons in its command line syntax).
If you leave out the colons it is ok.
"expdp DUMPFILE=dumpfile_`date '+%d_%m_%y_%H_%M_%S'`.datapump" works fine.
FJH

Similar Messages

Communicate with cRIO when IP Address and DNS Name changes over Network Variables

I am developing a LabVIEW software for an European Project using cRIO-9074 and RT Application Reployment to update all cRIO devices with the last version.
To communicate with the cRIO devices I have also developed some applications that are outside cRIO on LabVIEW Project that uses Network Variables to Read/Write to the devices.
When I am developing the software, everything works just fine because the LabVIEW Project knows the IP Address on my cRIO device. However, when I use RTAD to install the software and then my applications outside the LabVIEW Project, the aplications are, not always able to find the device when the IP address changes.
I have tried to replace the IP Address with the DNS Name but no success. When I change the router that is connected to the cRIO, the DNS Name also changes.
With this, my question is how can I solve this sistematic problem? Should I change any configuration on MAX, in LabVIEW Project and/or in the applications to be able to always find the cRIO? Is it possible to have a field on the application to insert the IP Address of the device to connect? If yes, how can I do this?
Best regards,

Quintino,
You can programatically open connecitons to Shared Variables. This allows you to decide at runtime the IP address, lib name and SV name you wish to connect to. I've attached a vi snippet the demonstrats an Action Engine to handle the connection to a SV named "Parameters".
I normally store the cRIO_Settings in a .INI file that is easy to modify.
Attachments:
SV Example.png ‏45 KB

Problem with oc4j when accessing over the host name?

Hi!
I have a standalone oc4j and application is working perfect when I use ip address of the server.
When I use dns name of the server I just can pass the login page and after that every jsp return me to the login page?
THANKS FOR A HELP!!!

The only way that we have found to work with DNS is to remove the redirects in the faces-config.xml navigation cases. If anyone finds a better resolution, please POST!

How to attach date time with dumpfile name taken with expdp in solaris

I have to write script for daily table backup which would run from crontab in solaris platform on daily basis. I am using expdp for the first time, the following command used to work with EXP
file=/anadbora13/Oracle_Backup/UIBS/dump/inter_UIBS_FM_`date +%d%m%y_%T`.dmp
But,
when I am using the following
dumpfile=inter_UIBS_FM_`date +%d%m%y_%T`.dmp
i am getting error :
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-39124: dump file name "+%d%m%y_%T.dmp" contains an invalid substitution variable
Pls help....Thanks in advance

Hi,
You need to build the parfile commands first (using
server sysdate), and then pass the parfile to
Oracle:
touch /tmp/parfile.txt
Why bother with the 'touch'?
file=/anadbora13/Oracle_Backup/UIBS/dump/inter_UIBS_FM
_`date +%d%m%y_%T`.dmp >> /tmp/parfile.txt
Shouldn't that be 'echo file=.... > /tmp ....'
Why do you show the redirection to append into the temporary command file?
Now, execute the utility. . . .
expdp parfile=/tmp/parfile.txt
To see working details, try Jon Emmon's book "Oracle
Shell Scripting":
http://www.rampant-books.com/book_2007_1_shell_scripti
ng.htm
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

I get a weekly email with a PDF attachment and when I open it it's to large to print. To date I'm not able to find a way to shrink or adjust the size. The doc was created on M/S Office-excell

I get a weekly email with a PDF attachment and when I open it it's to large to print and I know of no way to shrink or resize the doc. It's created in M/S excel. Can anymore assist....TX

From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

I have lightroom 5 with 5.7 updated. I use windows. My problem is with the spot healer or remover. It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

I have lightroom 5 with 5.7 verson updated. I use windows. My problem is with the spot healer or remover in the develop. It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up. I uninstalled the software and re installed it again but it didn't fix the problem and its still the same. Help please.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

Attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outb

attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??
MacBook Pro, Mac OS X (10.7.1)

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

ORA-01031: insufficient privileges when connecting by SQL PLUS 8.0 with sys

From client, I use SQL PLUS 8.0 to connect to server: sys/password@MYDB1 as sysdba
The error always raises “ORA-01031: insufficient privileges”
I have done:
- Set: remote_login_passwordfile=exclusive in tnsname.ora file
- Uncomment: SQLNET.AUTHENTICATION_SERVICES in “sqlnet.ora” file
Also on this client:
to use SQL PLUS 8.0 to connect to server: manager/password@MYDB1. To connect normally
to use PLSQL Deverloper (it is the same oracle_home with SQL PLUS 8.0) to connect to database normally with user sys.
To use Enterprise manager console (it is other oracle_home with SQL PLUS 8.0) to connect to database normally with user sys
Please, help me to solve this trouble

THIS IS CONTENT OF SQLNET.ora CLIENT
# copyright (c) 1996 by the Oracle Corporation
# NAME
# sqlnet.ora
# FUNCTION
# Oracle Network Client startup parameter file example
# NOTES
# This file contains examples and instructions for defining all
# Oracle Network Client parameters. It should be possible to read
# this file and setup a Client by uncommenting parameter definitions
# and substituting values. The comments should provide enough
# explanation to enable a reasonable user to manage his TNS connections
# without having to resort to 'real' documentation.
# SECTIONS
# ONames Client
# Namesctl
# Native Naming Adpaters
# MODIFIED
# skanjila 06/06/97 - Correct default for Automatic_IPC
# eminer 05/15/97 - Add the relevant onrsd parameters.
# asriniva 04/23/97 - Merge with version from doc
# ggilchri 03/31/97 - mods
# bvasudev 02/07/97 - Change sqlnet.authentication_services documentation
# bvasudev 11/25/96 - Merge sqlnet.ora transport related parameters
# asriniva 11/12/96 - Revise with new OSS parameters.
# asriniva 11/05/96 - Add ANO parameters.
# - ONames Client ----------------------------------------------------
#names.default_domain = world
#Syntax: domain-name
#Default: NULL
# Indicates the domain from which the client most often requests names. When
# this parameter is set the default domain name (for example, US.ACME), the
# domain name will be automatically appended to any unqualified name in an
# ONAmes request (query, register, deregister, etc). Any name which contains
# an unescaped dot ('.') will not have the default domain appended. Simple
# names may be qualified with a trailing dot (for example 'rootserver.').
#names.initial_retry_timeout = 30
#Syntax: 1-600 seconds
#Default: 15 (OSD)
# Determines how long a client will wait for a response from a Names Server
# before reiterating the request to the next server in the preferred_servers
# list.
#names.max_open_connections = 3
#Syntax: 3-64
#Default: ADDRS in preferred_servers
# Determines how many connections an ONames client may have open at one time.
# Clients will ordinarily keep connections to servers open once they are
# established until the operation (or session in namesctl) is complete. A
# connection will be opened whenever needed, and if the maximum would be
# exceeded the least recently used connection will be closed.
#names.message_pool_start_size = 10
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the client's message
# pool. This pool provides the client with pre-allocated messages to be used
# for requests to ONames servers. Messages which are in the pool and unused
# may be reused. If a message is needed and no free messages are available in
# the pool more will be allocated.
#names.preferred_servers = (address_list =
# (address=(protocol=ipc)(key=n23))
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (address=(protocol=tcp)(host=cicada)(port=1575))
#Syntax: ADDR_LIST
#Default: Well-Known (OSD)
# Specifies a list of ONames servers in the client's region; requests will be
# sent to each ADDRESS in the list until a response is recieved, or the list
# (and number of retries) is exhausted.
# Addresses of the following form specify that messages to the ONames server
# should use Oracle Remote Operations (RPC):
# (description =
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (connect_data=(rpc=on))
#names.request_retries = 2
#Syntax: 1-5
#Default: 1
# Specifies the number of times the client should try each server in the list
# of preferred_servers before allowing the operation to fail.
#names.directory_path
#Syntax: <adapter-name>
#Default: TNSNAMES,ONAMES,HOSTNAME
# Sets the (ordered) list of naming adaptors to use in resolving a name.
# The default is as shown for 3.0.2 of sqlnet onwards. The default was
# (TNSNAMES, ONAMES) before that. The value can be presented without
# parentheses if only a single entry is being specified. The parameter is
# recognized from version 2.3.2 of sqlnet onward. Acceptable values include:
# TNSNAMES -- tnsnames.ora lookup
# ONAMES -- Oracle Names
# HOSTNAME -- use the hostname (or an alias of the hostname)
# NIS -- NIS (also known as "yp")
# CDS -- OSF DCE's Cell Directory Service
# NDS -- Novell's Netware Directory Service
# - Client Cache (ONRSD) ---------------------------------------------
names.addresses = (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Syntax: ADDR
Default: (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Address on which the client cache listens (is available to clients).
Any valid TNS address is allowed. The default should be used if at
all possible; clients have this entry hardwired as the first line
of their server-list file (sdns.ora). If the address is set to a
non-default value the client's preferred_servers parameter should
be set to include the client-cache address first.
names.authority_required = False
Syntax: T/F
Default: False
Determines whether system querys (for the root etc) require Authoritative
answers.
names.auto_refresh_expire = 259200
Syntax: Number of seconds, 60-1209600
Default: 259200
This is the amount of time (in seconds) the server will cache the addresses
of servers listed in server-list file (sdns.ora). When this time expires the
server will issue another query to the servers in those regions to refresh
the data.
names.auto_refresh_retry = 180
Syntax: Number of seconds, 60-3600
Default: sec.     180
This set how often the server will retry when the auto_refresh query fails.
names.cache_checkpoint_file = cache.ckp
Syntax: filename
Default: $ORACLE_HOME/network/names/ckpcch.ora
Specifies the name of the operating system file to which the Names Server
writes its foreign data cache.
names.cache_checkpoint_interval = 7200
Syntax: Number of seconds, 10-259200
Default: 0 (off)
Indicates the interval at which a Names Server writes a checkpoint of its
data cache to the checkpoint file.
names.default_forwarders=
(FORWARDER_LIST=
(FORWARDER=
(NAME= rootserv1.world)
(ADDRESS=(PROTOCOL=tcp)(PORT=42100)(HOST=roothost))))
Syntax: Name-Value/address_list
Default: NULL
A list (in NV form) of the addresses of other servers which should be used to
forward querys while in default_forwarder (slave) mode. NAME is the global
names for the server to which forwards whould be directed, and ADDRESS is its
address.
names.default_forwarders_only = True
Syntax: T/F
Default: False
When set to true this server will use the servers listed in default_forwarders
to forward all operations which involve data in foreign regions. Otherwise it
will use the servers defined in the server-list file (sdns.ora) in addition
to any defined in the default_forwarders parameter.
names.log_directory = /oracle/network/log
Syntax: directory
Default: $ORACLE_HOME/network/log
Indicates the name of the directory where the log file for Names Server
operational events are written.
names.log_file = names.log
Syntax: filename
Default: names.log
The name of the output file to which Names Server operational events are
written.
names.log_stats_interval = 3600
Syntax: Number of seconds, 10-ub4max
Default: sec.     0 (off)
Specifies the number of seconds between statistical entries in log file.
names.log_unique = False
Syntax: T/F
Default: False
If set to true the server will guarantee that the log file will have a unique
name which will not overwrite any existing files (note that log files are
appended to, so log information will not be lost if log_unique is not true).
names.max_open_connections = 10
Syntax: 3-64
Default: 10
Specifies the number of connections that the Names Server can have open at any
given time. The value is generated as the value 10 or the sum of one
connection for listening, five for clients, plus one for each foreign domain
defined in the local administrative region, whichever is greater. Any
operation which requires the server to open a network connection will use
an already open connection if it is available, or will open a connection
if not. Higher settings will save time and cost network resources; lower
settings save network resources, cost time.
names.max_reforwards = 2
Syntax: 1-15
Default: 2
The maximum number of times the server will attempt to forward a certain
operation.
names.message_pool_start_size = 24
Syntax: 3-256
Default: 10
Determines the initial number of messages allocated in the server's message
pool. This pool provides the server with pre-allocated messages to be used
for incoming or outgoing messages (forwards). Messages which are in the pool
and unused may be reused. If a message is needed and no free messages are
available in the pool more will be allocated.
names.no_modify_requests = False
Syntax: T/F
Default: False
If set to true, the server will refuse any operations which modify the
data in its region (it will still save foreign info in the cache which is
returned from foreign querys).
names.password = 625926683431AA55
Syntax: encrypted string
Default: NULL
If set the server will require that the user provide a password in his
namesctl session (either with sqlnet.ora:namesctl.server_password or 'set
password') in order to do 'sensitive' operations, like stop, restart, reload.
This parameter is generally set in encrypted form, so it can not be set
manually.
names.reset_stats_interval = 3600
Syntax: 10-ub4max
Default: 0 (off)
Specifies the number of seconds during which the statistics collected by the
Names Servers should accumulate. At the frequency specified, they are reset
to zero. The default value of 0 means never reset statistics.
names.trace_directory = /oracle/network/trace
Syntax: directory
Default: $ORACLE_HOME/network/trace
Indicates the name of the directory to which trace files from a Names Server
trace session are written.
names.trace_file = names.trc
Syntax: filename
Default: names.trc
Indicates the name of the output file from a Names Server trace session.
names.trace_func # NA
Syntax: T/F
Default: False
Internal mechanism to control tracing by function name.
names.trace_level = ADMIN
Syntax: T/F
Default: False
Syntax: {OFF,USER,ADMIN,0-16}
Default: OFF (0)
Indicates the level at which the Names Server is to be traced.
Available Values:
     0 or OFF - No trace output
     4 or USER - User trace information
     10 or ADMIN - Administration trace information
     16 or SUPPORT - WorldWide Customer Support trace information
names.trace_mask = (200,201,202,203,205,206,207)
Syntax: list of numbers
Default: NULL
Internal mechanism to control trace behavior.
names.trace_unique = True
Syntax: T/F
Default: False
Indicates whether each trace file has a unique name, allowing multiple trace
files to coexist. If the value is set to ON, a process identifier is appended
to the name of each trace file generated.
# - Namesctl ---------------------------------------------------------
#namesctl.trace_directory = /oracle/network/trace
#Syntax: directory
#Default: $ON/trace
# Indicates the name of the directory to which trace files from a namesctl
# trace session are written.
#namesctl.trace_file = namesctl.trc
#Syntax: filename
#Default: namesctl.trc
# Indicates the name of the output file from a namesctl trace session.
#namesctl.trace_func # NA
#Syntax: word list
#Default: NULL
# Internal mechanism to control tracing by function name.
#namesctl.trace_level = ADMIN
#Syntax: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
# Indicates the level at which the namesctl is to be traced.
# Available Values:
#     0 or OFF - No trace output
#     4 or USER - User trace information
#     10 or ADMIN - Administration trace information
#     16 or SUPPORT - WorldWide Customer Support trace information
#namesctl.trace_mask # NA
#Syntax: number list
#Default: NULL
# Internal mechanism to control trace behavior.
#namesctl.trace_unique = True
#Syntax: T/F
#Default: False
# Indicates whether each trace file has a unique name, allowing multiple trace
# files to coexist. If the value is set to ON, a process identifier is appended
# to the name of each trace file generated.
#namesctl.no_initial_server = False
#Syntax: T/F
#Default: False
# If set to TRUE namesctl will suppress any error messages when namesctl is
# unable to connect to a default names server.
#namesctl.internal_use = True
#Syntax: T/F
#Default: False
# If set to true namesctl will enable a set of internal undocumented commands.
# All internal commands are preceded by an underscore ('_') in order to
# distinguish them as internal. Without going into details, the commands
# enabled are:
# adddata createname deletename
# fullstatus ireplacedata newttlname
# pause                 remove_data renamename
# replacedata start                 walk*
# There are also a set of names server variables which may be set when
# namesctl is in internal mode:
# authorityrequired autorefresh*
# cachecheckpoint_interval cachedump
# defaultautorefresh_expire defaultautorefresh_retry
# defaultforwarders_only forwardingdesired
# maxreforwards modifyops_enabled
# nextcache_checkpoint nextcache_flush
# nextstat_log nextstat_reset
# reload                         request_delay
# restart                        shutdown
#namesctl.noconfirm = True
#Syntax: T/F
#Default: False
# When set to TRUE namesctl will suppress the confirmation prompt when
# sensitive operations (stop, restart, reload) are requested. This is
# quite helpful when using namesctl scripts.
#namesctl.server_password = mangler
#Syntax: string
#Default: NULL
# Automatically sets the password for the names server in order to perform
# sensitive operations (stop, restart, reload). The password may also be
# set manually during a namesctl session using 'set password'.
#namesctl.internal_encrypt_password = False
#Syntax: T/F
#Default: True
# When set to TRUE namesctl will not encrypt the password when it is sent to
# the names server. This would enable an unencrypted password to be set in
# names.ora:names.server_password
# - Native Naming Adpaters -------------------------------------------
#names.dce.prefix = /.:/subsys/oracle/names
#Syntax: DCE cell name
#Default: /.:/subsys/oracle/names
#Specifies the DCE cell (prefix) to use for name lookup.
#names.nds.name_context = personnel.acme
#Syntax: NDS name
#Default: (OSD?)
# Specifies the default NDS name context in which to look for the name to
# be resolved.
#names.nis.meta_map # NA
# Syntax: filename
# Default: sqlnet.maps
# Specifies the file to be used to map NIS attributes to an NIS mapname.
# Currently unused.
# - Advanced Networking Option Authentication Adapters ----------------
#sqlnet.authentication_services
# Syntax: A single value or a list from {beq, none, all, kerberos5,
#       cybersafe, securid, identitx}
# Default: NONE
# Enables one or more authentication services. To enable
# authentication via the Oracle Security Server, use (beq, oss). If
# the Advanced Networking Option has been installed with Kerberos5
# support, using (beq, kerberos5) would enable authentication via
# Kerberos.
sqlnet.authentication_services=(beq, oss)
## Parmeters used with Kerberos adapter.
#sqlnet.kerberos5_cc_name
# Syntax: Any valid pathname.
# Default: /tmp/krb5cc_<uid>
# The Kerberos credential cache pathname.
#sqlnet.kerberos5_cc_name=/tmp/mycc
#sqlnet.kerberos5_clockskew
# Syntax: Any positive integer.
# Default: 300
# The acceptable difference in the number of seconds between when a
# credential was sent and when it was received.
#sqlnet.kerberos5_clockskew=600
#sqlnet.kerberos5_conf
# Syntax: Any valid pathname.
# Default: /krb5/krb.conf
# The Kerberos configuration pathname.
#sqlnet.kerberos5_conf=/tmp/mykrb.conf
#sqlnet.kerberos5_realms
# Syntax: Any valid pathname
# Default: /krb5/krb.realms
# The Kerberos host name to realm translation file.
#sqlnet.kerberos5_realms=/tmp/mykrb.realms
#sqlnet.kerberos5_keytab
# Syntax: Any valid pathname.
# Default: /etc/v5srvtab
# The Kerberos secret key file.
#sqlnet.kerberos5_keytab=/tmp/myv5srvtab
#sqlnet.authentication_kerberos5_service
# Syntax: Any string.
# Default: A default is not provided.
# The Kerberos service name.
#sqlnet.authentication_kerberos5_service=acme
## Parmeters used with CyberSAFE adapter.
#sqlnet.authentication_gssapi_service
# Syntax: A correctly formatted service principal string.
# Default: A default is not provided.
# The CyberSAFE service principal
#sqlnet.authentication_gssapi_service=acme/[email protected]
## Parmeters used with Identix adapter.
#sqlnet.identix_fingerprint_method
# Syntax: Must be oracle.
# Default: A default is not provided.
# The Identix authentication server method
#sqlnet.identix_fingerprint_method=oracle
#sqlnet.identix_fingerprint_database
# Syntax: Any string.
# Default: A default is not provided.
# The Identix authentication server TNS alias
#sqlnet.identix_fingerprint_database=ofm
#sqlnet.identix_fingerprint_database_user
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known username.
#sqlnet.identix_fingerprint_database_user=ofm_client
#sqlnet.identix_fingerprint_database_password
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known password.
#sqlnet.identix_fingerprint_database_password=ofm_client
# - Advanced Networking Option Network Security -------------------------
#sqlnet.crypto_checksum_client
#sqlnet.crypto_checksum_server
#sqlnet.encryption_client
#sqlnet.encryption_server
# These four parameters are used to specify whether a service (e.g.
# crypto-checksumming or encryption) should be active:
# Each of the above parameters defaults to ACCEPTED.
# Each of the above parameters can have one of four possible values:
# value          meaning
# ACCEPTED     The service will be active if the other side of the
#          connection specifies "REQUESTED" or REQUIRED" and
#          there is a compatible algorithm available on the other
#          side; it will be inactive otherwise.
# REJECTED     The service must not be active, and the connection
#          will fail if the other side specifies "REQUIRED".
# REQUESTED     The service will be active if the other side specifies
#          "ACCEPTED", "REQUESTED", or "REQUIRED" and there is a
#          compatible algorithm available on the other side; it
#          will be inactive otherwise.
# REQUIRED     The service must be active, and the connection will
#          fail if the other side specifies "REJECTED" or if there
#          is no compatible algorithm on the other side.
#sqlnet.crypto_checksum_types_client
#sqlnet.crypto_checksum_types_server
#sqlnet.encryption_types_client
#sqlnet.encryption_types_server
# These parameters control which algorithms will be made available for
# each service on each end of a connection:
# The value of each of these parameters can be either a parenthesized
# list of algorithm names separated by commas or a single algorithm
# name.
# Encryption types can be: RC4_40, RC4_56, RC4_128, DES, DES40
# Encryption defaults to all the algorithms.
# Crypto checksum types can be: MD5
# Crypto checksum defaults to MD5.
#sqlnet.crypto_seed ="4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf"
#sqlnet.crypto_checksum_server = required
#sqlnet.encryption_server = required
# - Oracle Security Server ---------------------------------------------
#oss.source.my_wallet
# Syntax: A properly formatted NLNV list.
# Default: Platform specific. Unix: $HOME/oracle/oss
# The method for retrieving and storing my identity.
#oss.source.my_wallet
# =(source
# =(method=file)
# (method_data=/dve/asriniva/oss/wallet)
#oss.source.location
# Syntax: A properly formatted NLNV list.
# Default: Oracle method, oracle_security_service/oracle_security_service@oss
# The method for retrieving encrypted private keys.
#oss.source.location
# =(source
# =(method=oracle)
# (method_data=
# (sqlnet_address=andreoss)
# - Sqlnet(v2.x) and Net3.0 Client ------------------------------------------
# In the following descriptions, the term "client program" could mean
# either sqlplus, svrmgrl or any other OCI programs written by users
#trace_level_client = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the client program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
#     4 or USER - User trace information
#      10 or ADMIN - Administration trace information
#     16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#trace_directory_client = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the client execution are written.
#Supported since: v2.0
#trace_file_client = /oracle/network/trace/cli.trc
#Possible values: Any valid file name
#Default:     $ORACLE_HOME/network/trace/cli.trc ($ORACLE_HOME =
#          /oracle at customer site)
#Purpose: Indicates the name of the file to which the execution trace
# of the client is written to.
#Supported since: v2.0
#trace_unique_client = ON
#Possible values: {ON, OFF}
#Default: OFF
#Purpose: Used to make each client trace file have a unique name to
#     prevent each trace file from being overwritten by successive
#     runs of the client program
#Supported since: v2.0
#log_directory_client = /oracle/network/log
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/log ($ORACLE_HOME = /oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which the client log file
#     is written to.
#Supported since: v2.0
#log_file_client = /oracle/network/log/sqlnet.log
#Possible values: This is a default value, u cannot change this
#Default: $ORACLE_HOME/network/log/sqlnet.log ($ORACLE_HOME=/oracle in
# customer site)
#Purpose: Indicates the name of the log file from a client program
#Supported since: v2.0
#log_directory_server = /oracle/network/trace
#Possible values: Any valid diretcory path with write permission
#Default: $ORACLE_HOME/network/trace ( $ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which log files from the
#      server are written
#Supported since: v2.0
#trace_directory_server = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network_trace ( $ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which trace files from
# the server are written
#Supported since: v2.0
#trace_file_server = /orace/network/trace/svr_<pid>.trc
#Possible values: Any valid filename
#Default: $ORACLE_HOME/network/trace/svr_<pid>.trc where <pid? stands for
# the process id of the server on UNIX systems
#Purpose: Indicates the name of the file to which the execution trace of
# the server program is written to.
#Supported since: v2.0
#trace_level_server = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#use_dedicated_server = ON
#Possible values: {OFF,ON}
#Default:      OFF
#Purpose: Forces the listener to spawn a dedicated server process for
#     sessions from this client program.
#Supported since: v2.0
#use_cman = TRUE
#Possible values: {TRUE, FALSE}
#Default:     FALSE
#Purpose:
#Supported since: v3.0
#tnsping.trace_directory = /oracle/network/trace
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the directory to which the execution trace from
#     the tnsping program is to be written to.
#Supported since: v2.0
#tnsping.trace_level = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#sqlnet.expire_time = 10
#Possible values: 0-any valid positive integer! (in minutes)
#Default: 0 minutes
#Recommended value: 10 minutes
#Purpose: Indicates the time interval to send a probe to verify the
#     client session is alive (this is used to reclaim watseful
#     resources on a dead client)
#Supported since: v2.1
#sqlnet.client_registration = <unique_id>
#Possible values:
#Default: OFF
#Purpose: Sets a unique identifier for the client machine. This
#     identifier is then passed to the listener with any connection
#     request and will be included in the Audit Trail. The identifier
#     can be any alphanumeric string up to 128 characters long.
#Supported since: v2.3.2
#bequeath_detach = YES
#Possible values: {YES,NO}
#Default: NO
#Purpose: Turns off signal handling on UNIX systems. If signal handling
#     were not turned off and if client programs written by users make
#     use of signal handling they could interfere with Sqlnet/Net3.
#Supported since: v2.3.3
#automatic_ipc = OFF
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: Force a session to use or not to use IPC addresses on the
#     client's node.
#Supported since: v2.0
#disable_oob = ON
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: If the underlying transport protocol (TCP, DECnet,...) does
# not support Out-of-band breaks, then disable out-of-band
#     breaks
#Supported since: v2.0
#

I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.

I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.

skinaked101,
Look no further help is here! I can understand the importance of being able to keep your pictures safe on your computer.
Have you tried using different USB ports on your computer, as your fellow community member suggested?
Visit http://www.verizonwireless.com/support/knowledge-base-97259/ for complete steps to transfer the pictures from your phone to computer.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?

Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

HT1766 When on Facebook that has an attachment to utube or any thing with sou,when I nd,I can not get the sound. What do I need to do?

WHen on face book that has an attachment to utube or anything with sound when I open it I can not get sound. Can someone help me?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You may need to check for caret browsing (F7 toggles that) as well if you get a cursor if you click on the web page in case your cat pressed F7 as well.<br />
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

Why can't i open an attached document (most often pps) with firefox when i can with internet explorer?

why can't i open an attached document (most often pps) with firefox when i can with internet explorer?

Perhaps if you change your setting here:
orange Firefox button ''or'' Tools menu > Options > Applications tab
In the search box, type '''power''' and then pause until the list is filtered. If you have these, try changing the action to "Always Ask":
Microsoft PowerPoint Presentation<br>
Microsoft PowerPoint Slide Show
It's possible that if you don't have Microsoft Office installed, you might not have those listed.

My iPhone 6 plus will not automatically wi fi sync with iTunes 12 when attached to a power supply.

My iPhone 6 plus will not automatically wi fi sync with iTunes 12 when attached to a power suppy
i can manually sync from phone or iTunes on MacBook but will not auto sync.
have latest versions of IOS8, OSX Yosemite and ITunes 12.

Good day dexv,
There are three conditions that must be met in order for an iPhone to sync automatically over Wi-Fi. It sounds as if you have met one of them, can you check to see if the other two are met as well?
See this article -
Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support
The iOS device will sync automatically when the following conditions are true:
The iOS device is charging.
iTunes is open on the computer.
The iOS device and the computer are on the same Wi-Fi network.
Thanks for using Apple Support Communities.
Safe computing,
Brett L

ORA-39124 with expdp when attaching timestamp to dumpfile name

Similar Messages

Maybe you are looking for