Communicate with cRIO when IP Address and DNS Name changes over Network Variables

I am developing a LabVIEW software for an European Project using cRIO-9074 and RT Application Reployment to update all cRIO devices with the last version.
To communicate with the cRIO devices I have also developed some applications that are outside cRIO on LabVIEW Project that uses Network Variables to Read/Write to the devices.
When I am developing the software, everything works just fine because the LabVIEW Project knows the IP Address on my cRIO device. However, when I use RTAD to install the software and then my applications outside the LabVIEW Project, the aplications are, not always able to find the device when the IP address changes.
I have tried to replace the IP Address with the DNS Name but no success. When I change the router that is connected to the cRIO, the DNS Name also changes.
With this, my question is how can I solve this sistematic problem? Should I change any configuration on MAX, in LabVIEW Project and/or in the applications to be able to always find the cRIO? Is it possible to have a field on the application to insert the IP Address of the device to connect? If yes, how can I do this?
Best regards,

Quintino,
You can programatically open connecitons to Shared Variables. This allows you to decide at runtime the IP address, lib name and SV name you wish to connect to. I've attached a vi snippet the demonstrats an Action Engine to handle the connection to a SV named "Parameters".
I normally store the cRIO_Settings in a .INI file that is easy to modify.
Attachments:
SV Example.png ‏45 KB

Similar Messages

Hard Drive and Computer Name changes on Network

We have 3 computers in our office: One G4 and two G5 (one with Panther and one with Leopard).
There was confusion on the network because all the drive where called « HD MacIntosh ».
I changed the names of all the computers in SHARING, I manually renamed all the hard drives by selecting the text under the hard drive icons:
The old G4 has 2 hard drives (New G4, Old G4) and the two other computers' hard drives are called G5 Carole and G5 Stephen.
Still, when I connect from one computer to another I STILL SEE « HD MACINTOSH » where I should see the new name I gave!!!
What I am doing wrong?

Hi pitou-
Did you try rebooting everything including network hardware?
Luck-
-DaddyPaycheck

HP 5510,windows 7, new setup of printer, "unable to communicate with printer" when i try to print

HP 5510, Windows 7, new printer, just picked it up!, "unable to communicate with printer" when I try to print a page, all network conections check out OK with Print Diagnostic Utility.

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a new email address which I have had verified, but when I try to update an app it asks for my password with the old email address and always comes back telling me it is an incorrect password.

I Have a new email address which I have entered into settings and it has been verified. I no longer have the old email address. When I try to update an app, it comes up with my old email address and asks for my password. It always comes back with a message that the password is incorrect. What do I do to fix this?

Hi Vivian Zollman,
Welcome to the Support Communities!
I'm not sure if you are referring to your Apple ID or just your email account in the Mail app. So, I've included all of the articles that may be relevant for you.
iOS: Setting up an email account
http://support.apple.com/kb/ht4810
If you already have an email account set up and you want to modify its settings, tap Settings > Mail, Contacts, Calendars, tap the name of your account, and then your email address. Then tap any information you want to adjust.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
iCloud: View or change your iCloud payment information
http://support.apple.com/kb/PH2616
Cheers,
- Judy

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

Defining IP Address and DNS configration on VMWare server?

plz suggest as mentioned in subject.
We have SuSe LINUX Version ans wants to define IP Address and DNS setting.
We get some error which looks like as resulted due to IP or DNS setting.
Guys..guide me to correct forum if reqd.

Using VMWare there are two issues to keep in mind.
a) Which kind of network are you using in VMWare
b) Set up the IP information in your VMWare guest (SuSe)
a) There are three network types in VMWare, host only, bridged and NAT.
Usually I use host-only for my machines as they are used for internal testing.. Bridged will connect to the real network and maybe you get an IP address from there (when DHCP is used). NAT will use you computers IP and translate it.
b) Setting the IP is easy - just use YAST and configure the IP address of your machine (either fixed or using DHCP). Setting up a DNS server yourself is out of the scope of this posting. Look on the internet for a howto to set up your DNS server. If you just need to configure a DNS server with your IP this can be done with YAST.
cu
Andreas

When emails arrive they arrive as email addresses and not names

When emails arrive they arrive as email addresses and not names from my contact list.
What gives?
Thanks

ok well I think I can confirm your theory by the fact that the few names that do show up are from PCs (where people's names are always entered in).
Generally, most people enter their name in the Name field for their email account settings with the email client used on their computer, but not always. This is entirely up to the sender and is not required.
90% of everyone else on my contact list is using mobile phones where names are not used like they are on PCs or smart phones.
The very same applies to the email client used on a cell phone. I can remove my first and last name from the Name field for my email account settings, or I can enter Allan or ALLAN only and if I use ALL CAPS for my first name or for my first and last name, the name I've entered in the Name field will appear in ALL CAPS when the email is received. If I remove my name from the name field, my email address will appear only with all sent messages.
This must mean that you too must have a lot of no name emails coming in right?
Nope, because the overwhelming majority of people that send me email have their name entered in the Name field for their email account settings with the email client used on their computer for accessing the account and with the email client on their smart phone.

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE. What should I do?

I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?

It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

Migrate Active Directory 2008 to 2012 but need to keep the same ip address and server name

Hi,
Current setup is 2 DCs in one site running 2008 R2 AD.
We are planning to migrate from 2008 R2 to 2012 R2 but need to keep the same ip address and server name. I have came up two plans to do this and hope someone can tell me which one would be the best approach. What is the pros
and cons in Plan A and B or may be plan C if there is a better one?
First, I was planning to do plan A but just had a second thought of Plan B. My concern in Plan A is about changing the server name when the new 2012 R2 already running as DC. Plan B would be changing all the old server
name and ip before they become member sever and DC.
Any information and suggestion would be very appreciated.
Plan A
Run adprep /forestprep on 2008 R2 DC
Build a new 2012 R2 server and promote it as 3rd DCs in current Domain
Transfer FSMO from 2008 R2 to 2012 R2
Run Repadmin /syncall to force replication
Rename the demoted 2008 R2 DC to something else
Change the demoted 2008 R2 ip address to something else
Restart the demoted 2008 R2 server to take effect
Now, run Netdom computername command to change the new 2012 R2 server name to the old 2008 R2 DC server name
Change the new 2012 R2 DC's ip to old 2008 R2 DC's ip
Run ipconfig /flushdns
Run ipconfig /registerdns
DCDIAG to see any error
Plan B
Build 2 new 2012 R2 standalone servers
In 2008 R2 ServerA transfer FSMO to 2008 R2 ServerB
Demote 2008 R2 ServerA to become member server
Rename 2008 R2 ServerA to something else and change the ip address to something else and shut it down
Now, rename one of the new 2012 R2 standalone server to the old demoted 2008 R2 ServerA name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 ServerA's ip address
Add the new 2012 R2 standalone server (now with the old 2008 R2 ServerA name and ip) to become member server
Run adprep /forestprep on the 2008 R2 ServerB
Promote the new 2012 R2 (now with the old 2008 R2 ServerA name and ip) as DC
Transfer 2008 R2 ServerB FSMO to the new 2012 R2 DC (now with the old 2008 R2 ServerA name and ip)
Demote 2008 R2 ServerB as member server
Rename 2008 R2 ServerB to something else and change the ip address to something else and shut it down
Now, rename the 2nd new 2012 R2 standalone server to the old demoted 2008 R2 ServerB name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 SeverB 's ip address
Add the 2nd new 2012 R2 standalone server to become member server
Promote it as DC
Run DCDIAG to check error
Thanks.

Hi,
Renaming a Domain Controller is a risky operation which may lead to issues, therefore, I would suggest you go with the Plan B, rename the server before it becomes DC.
Here is a blog below which could be helpful to you:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Can my contacts on my iPhone see my personal information such as my home address and "related names" (relatives)?

I was setting up my own info in Contacts on my iPhone 5S to keep things organized and tidy. I added in my home addresses (I have two) and added my relatives' names as well. I did this to make things convenient for me, especially when using Maps... I can just type or say "home" or "home2" instead of typing in the entire address or scrolling around and zooming in with my fingers. It's especially handy when I'm driving and don't want to use my hands. I also added in my relatives' names so I can just tell Siri to give me directions to "aunt Debbie" or "call uncle Joe," etc...
But then I realized this is information that my contacts can probably see. Many of my contacts are only professional acquaintances (not friends) and I don't want them to know my home addresses or the names of my relatives. All I want my contacts to see is my phone number, job title, and the link to my LinkedIn page.
As far as I know there is no setting to control what info is visible to your contacts. If there is, can someone please point it out to me? If not, is there another solution? Or should I just not have my addresses stored in my phone (which kind of defeats the purpose of the phone being convenient when you need it to)? Any help is appreciated, thanks.
iPhone 5S
iOS 8.2

I hope that's right. With social networking and social integration and now iCloud in the picture, I wonder what gets synced these days between contacts. I have contacts in my iPhone who I have no idea who they are but they automatically synced to my phone simply because I had an email exchange with them once upon a time. And I'll get those same peoples' birthday reminders (as if I care), LinkedIn links, and though I don't use facebook or twitter I'm sure those show up on everybody's contacts who uses them.
I used to be more tech savvy a few years ago but with more responsibilities as I get older I just don't have the time to study what's what these days. These days it seems like everything is now about the "cloud" and I have no idea what iCloud will sync automatically with other iPhone users. I'm growing increasingly wary about who can see what, and my home addresses and relatives' names are on top of that list.
Thank you for your reply.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

I recently changed my email address and need to change my icloud account both on my itunes and iphone. how do I do this without completely wiping the phone?

I recently changed my email address and need to change my icloud account on both my itunes and iphone. How do I do this without completely wiping the phone.
Also I tried to update to iOS6 and it is asking for my password under my old signin and locked me out of my phone.
What can I do?
Thanks

This explains how to change your ID: http://support.apple.com/kb/HT5621. After changing your ID you will need to go to Settings>iCloud, delete the existing account (which only deletes it from your device, not from iCloud), then sign back in with the new ID. To avoid losing photo stream photos, save them to your camera roll before deleting the existing account.
If you are signed into your account on your Mac, you will need to go to System Preferences>iCloud, sign out, then sign back in with the new ID.

I want to switch my user id with my rescue email address, how can i change my rescue email address to something else to free that up?

i want to switch my user id with my rescue email address, how can i change my rescue email address to something else to free that up?

Hi EllaBella0902,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to change your rescue email address:
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620?viewlocale=en_US
Before you make any changes, you may want to review the information in the Frequently Asked Questions section of this article:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
This article explains how to update the information in the various services that use the Apple ID if you change it:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
Cheers,
- Judy

Communicate with cRIO when IP Address and DNS Name changes over Network Variables

Similar Messages

Maybe you are looking for