[orabpel_10.1.2.0.2_WL_solaris]: XMLScriptReader: unable to parse the provi

All,
I have downloaded orabpel_10.1.2.0.2_WL_solaris.bin and have tried to install this.
However this fails horribly.
First here are some details on the machine i try to install it on.
I hope someone can help me with this.
Paul
uname -a
SunOS dasapsd2 5.10 Generic_118833-24 sun4u sparc SUNW,Sun-Fire-V240
ptrdiag
System Configuration: Sun Microsystems sun4u Sun Fire V240
System clock frequency: 167 MHZ
Memory size: 2GB
==================================== CPUs ====================================
E$ CPU CPU
CPU Freq Size Implementation Mask Status Location
0 1002 MHz 1MB SUNW,UltraSPARC-IIIi 2.4 on-line MB/P0
1 1002 MHz 1MB SUNW,UltraSPARC-IIIi 2.4 on-line MB/P1
================================= IO Devices =================================
Bus Freq Slot + Name +
Type MHz Status Path Model
pci 66 MB pci108e,1648 (network)
okay /pci@1f,700000/network@2
pci 66 MB pci108e,1648 (network)
okay /pci@1f,700000/network
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial@0,3f8
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial
pci 33 MB isa/rmc-comm-rmc_comm (seria+
okay /pci@1e,600000/isa@7/rmc-comm@0,3e8
pci 33 MB pci10b9,5229 (ide)
okay /pci@1e,600000/ide
pci 66 MB scsi-pci1000,21 (scsi-2)
okay /pci@1c,600000/scsi@2
pci 66 MB scsi-pci1000,21 (scsi-2)
okay /pci@1c,600000/scsi
pci 66 MB pci108e,1648 (network)
okay /pci@1d,700000/network
pci 66 MB pci108e,1648 (network)
okay /pci@1d,700000/network
============================ Memory Configuration ============================
Segment Table:
Base Address Size Interleave Factor Contains
0x0 1GB 1 BankIDs 0
0x1000000000 1GB 1 BankIDs 16
Bank Table:
Physical Location
ID ControllerID GroupID Size Interleave Way
0 0 0 1GB 0
16 1 0 1GB 0
Memory Module Groups:
ControllerID GroupID Labels Status
0 0 MB/P0/B0/D0
0 0 MB/P0/B0/D1
1 0 MB/P1/B0/D0
1 0 MB/P1/B0/D1
########## END DETAILS ###########
The command i use is the following.
export LAX_DEBUG=1
sh orabpel_10.1.2.0.2_WL_solaris.bin -i console
And then the output is as follows
dasapsd2 tmp # sh orabpel_10.1.2.0.2_WL_solaris.bin -i console
Preparing to install...
Checking for POSIX df.
Found POSIX df.
Checking tail options...
Using tail -n 1.
True location of the self extractor: /var/tmp/orabpel_10.1.2.0.2_WL_solaris.bin
Creating installer data directory: /tmp/install.dir.8538
Creating installer data directory: /tmp/install.dir.8538/InstallerData
Gathering free-space information...
Space needed to complete the self-extraction: 713319 blocks
Available space: 1048560 blocks
Available blocks: 1048560 Needed blocks: 713319 (block = 512 bytes)
Computed number of blocks to extract: 719
Extracting the JRE from the installer archive...
Extracting JRE from orabpel_10.1.2.0.2_WL_solaris.bin to /tmp/install.dir.8538/Solaris/resource/jre_padded ...
Extracting done, exit code = 0
Extracting JRE from /tmp/install.dir.8538/Solaris/resource/jre_padded to /tmp/install.dir.8538/Solaris/resource/vm.tar.Z ...
Extracting done, exit code = 0
Unpacking the JRE...
Unpacking the JRE...
gzip is hashed (/usr/bin/gzip)
GZIP done.
TAR done.
Extracting the installation resources from the installer archive...
Extracting install.zip from orabpel_10.1.2.0.2_WL_solaris.bin to /tmp/install.dir.8538/InstallerData/installer.padded ...
Extracting to padded done, exit code = 0
Extracting from padded to zip done, exit code = 0
Creating disk1 data directory: /tmp/install.dir.8538/InstallerData/Disk1
Creating instdata data directory: /tmp/install.dir.8538/InstallerData/Disk1/InstData
Extracting resources from orabpel_10.1.2.0.2_WL_solaris.bin to /tmp/install.dir.8538/InstallerData/Disk1/InstData/Resource1.zip ...Extracting done, exit code = 0
Configuring the installer for this system's environment...
========= Analyzing UNIX Environment =================================
Setting UNIX (sunos) flavor specifics.
Importing UNIX environment into LAX properties.
Checking for POSIX awk.
========= Analyzing LAX ==============================================
LAX found............................ OK.
LAX properties read.................. OK.
========= Finding VM =================================================
Valid VM types.......................... J2 J1 MSJ MRJ
Absolute LAX_VM path.................... /tmp/install.dir.8538/Solaris/resource/jre/bin/java
Expanded Valid VM types................. JRE_J2 JDK_J2 JRE_J1 JDK_J1 MSJ MRJ
* Using VM.....(lax.nl.current.vm)...... /tmp/install.dir.8538/Solaris/resource/jre/bin/java
========= Virtual Machine Options ====================================
LAX properties incorporated............. OK.
classpath............................... "/tmp/install.dir.8538/InstallerData:/tmp/install.dir.8538/InstallerData/installer.zip"
main class.............................. "com.zerog.ia.installer.Main"
.lax file path.......................... "/tmp/install.dir.8538/temp.lax"
user directory.......................... "/tmp/install.dir.8538"
stdout to............................... "console"
sterr to................................ "console"
install directory....................... ""
JIT..................................... none
option (verify)......................... off
option (verbosity)...................... none
option (garbage collection extent)...... none
option (garbage collection thread)...... none
option (native stack max size).......... none
option (java stack max size)............ none
option (java heap max size)............. 50331648
option (java heap initial size)......... 16777216
option (lax.nl.java.option.additional).. none
========= Display settings ===========================================
X display............................... not set
UI mode................................. console
Launching installer...
CLASSPATH:/tmp/install.dir.8538/InstallerData:/tmp/install.dir.8538/InstallerData/installer.zip:
========= Forking JAVA =============================================
LAX Version = 6.0
IAResourceBundle: create resource bundle: en
IACommandLineParser::<init> ---starting---
IACommandLineParser::<init> ---ending---
propertiesFileName = null
seaFilename = orabpel_10.1.2.0.2_WL_solaris
Default properties location = /var/tmp/
UI Mode set to __________________________________________________________________________
InstallAnywhere 6.1 Enterprise
Thu Jan 04 17:22:29 CET 2007
Free memory = 14506 kB
Total memory = 16320 kB
2Command Line Args:
0: -i
1: console
java.class.path:
/tmp/install.dir.8538/InstallerData
/tmp/install.dir.8538/InstallerData/installer.zip
ZGUtil.CLASS_PATH:
/tmp/install.dir.8538/InstallerData
/tmp/install.dir.8538/InstallerData/installer.zip
sun.boot.class.path:
/tmp/install.dir.8538/Solaris/resource/jre/lib/rt.jar
/tmp/install.dir.8538/Solaris/resource/jre/lib/i18n.jar
/tmp/install.dir.8538/Solaris/resource/jre/lib/sunrsasign.jar
/tmp/install.dir.8538/Solaris/resource/jre/classes
java.ext.dirs:
/tmp/install.dir.8538/Solaris/resource/jre/lib/ext
java.version == 1.3.1_11 (Java 2+)
java.vm.name == Java HotSpot(TM) Client VM
java.vm.vendor == Sun Microsystems Inc.
java.vm.version == 1.3.1_11-b02
java.vm.specification.name == Java Virtual Machine Specification
java.vm.specification.vendor == Sun Microsystems Inc.
java.vm.specification.version == 1.0
java.specification.name == Java Platform API Specification
java.specification.vendor == Sun Microsystems Inc.
java.specification.version == 1.3
java.vendor == Sun Microsystems Inc.
java.vendor.url == http://java.sun.com/
java.class.version == 47.0
java.compiler == null
java.home == /tmp/install.dir.8538/Solaris/resource/jre
java.io.tmpdir == /var/tmp/
os.name == SunOS
os.arch == sparc
os.version == 5.10
path.separator == :
file.separator == /
file.encoding == ISO8859-1
user.name == root
user.home == /root
user.dir == /tmp/install.dir.8538
user.language == en
user.region == US
Preparing CONSOLE Mode Installation...
===============================================================================
(created with InstallAnywhere by Zero G)
Installer: InstallAnywhere 6.1 Enterprise Build 2325
System's temporary directory = /tmp
Please report the following to IA Engineering:
XMLScriptReader: ERROR during instantiation of object. This object was lost!
- refID: null
- class: com.zerog.ia.installer.Installer
java.lang.UnsatisfiedLinkError: exception occurred in JNI_OnLoad
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1414)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1330)
at java.lang.Runtime.loadLibrary0(Runtime.java:744)
at java.lang.System.loadLibrary(System.java:815)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:48)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1065)
at java.awt.Toolkit.<clinit>(Toolkit.java:1086)
at java.awt.Color.<clinit>(Color.java:183)
at com.zerog.ia.installer.util.InstallFrameConfigurator.<clinit>(DashoA8113)
at com.zerog.ia.installer.Installer.e(DashoA8113)
at com.zerog.ia.installer.Installer.d(DashoA8113)
at com.zerog.ia.installer.Installer.<init>(DashoA8113)
at com.zerog.ia.installer.Installer.<init>(DashoA8113)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at ZeroGep.a(DashoA8113)
at ZeroGep.c(DashoA8113)
at ZeroGep.a(DashoA8113)
at ZeroGep.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.o(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
XMLScriptReader: unable to parse the provided script file. File may have been invalid...
java.lang.NullPointerException
at ZeroGep.a(DashoA8113)
at ZeroGep.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.o(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Unable to instantiate the installer.
Unable to load and to prepare the installer in console or silent mode.
=======================================================
Installer User Interface Mode Not Supported
Unable to load and to prepare the installer in console or silent mode.
=======================================================
SHUTDOWN REQUESTED

I have/had the same problem, in the release notes it is stated that the integration products dont work with the the latest AS release.
The problem is wehere can you find the 10.1.2.0.0 AS release?

Similar Messages

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

JMS Adapter: Unable to parse the scema error in step 7

Hi
I get unable to parse the schema error in step 7 of JMS Adapter partner link definition (in Type Chooser window). I am using RosettaNet 3b2 Schema converted from DTD by Tibco tools.
Any help greatly appreciated.

forwarded to the JMS adapter team. It would be nice if you could provide more context around the input you provided in the first 6 step (could you please post the schema or if there are a set of them, zip them up, rename the file .zap and email to collaxa_support_us at oracle.com). Thank you. -Edwin

Opatch error 'Unable to parse the xml file'

Hi there,
I am new to installing patches on Oarcle and I need to install patch 12375678 on my windows system, Oracle 11.2.0.2.
I have followed the instructions in the readme.txt file, but got this error and I have not come across anywhere on the web that explain how I could fix it.
Could you please advise?
Thanks
C:\>set oracle_home=C:\oracle\product\11.2.0\dbhome_1
C:\>echo %oracle_home%
C:\oracle\product\11.2.0\dbhome_1
C:\>cd C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678
C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678>opatch apply
Invoking OPatch 11.2.0.1.1
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\product\11.2.0\dbhome_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.2.0.1.1
OUI version : 11.2.0.2.0
OUI location : C:\oracle\product\11.2.0\dbhome_1\oui
Log file location : C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2
012-05-21_15-28-52PM.log
Patch history file: C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch_
history.txt
ApplySession applying interim patch '12375678' to OH 'C:\oracle\product\11.2.0\d
bhome_1'
Running prerequisite checks...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '12375678' for restore. This might take a
while...
Backing up files affected by the patch '12375678' for rollback. This might take
a while...
Patching component oracle.rdbms, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\xml\xsl\kuexttbl.xsl"
Patching component oracle.rdbms.dbscripts, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpd.plb"
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpw.plb"
ApplySession adding interim patch '12375678' to inventory
Interim Patch metadata parsing failure... 'Unable to parse the xml file.'
ApplySession failed: ApplySession failed in system modification phase... 'Unable
to create patchObject'
OPatch will attempt to restore the system...
Restoring the Oracle Home...
OPatch was able to restore your system. Look at log file and timestamp of each f
ile to make sure your system is in the state prior to applying the patch.
OPatch failed with error code = 73

your actions.xml must not be able to be read.
open it in notepad yourself to see does it open, if so its not corrupt, if doesnt open download patch again.
More then likely will be fine so try locate the patch in a shorter home path, like c:\patches\12375678 and see does it install from there.
Only other thing I can think of is the main inventory.xml, usually c:\program files\oracle\inventory\inventory.xml
try notepad with that too.

Unable to open some psd file - "could not complete your request ,unable to parse the path data"

Hi I am unable to open some psd file that i created . I get this message "could not complete your request ,unable to parse the path data" I am curently using cs6. Any idea how to fix it. I tried opening on other computer with photoshop but no luck yet.

Is Vista a supported CS6 system????
Photoshop CS6 / Tech specs
System requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3 or Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. Refer to the CS6 FAQ for more information about Windows 8 support.*
1GB of RAM
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 256MB (512MB recommended) of VRAM
OpenGL 2.0–capable system
DVD-ROM drive
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.

Unable to parse the ZenWorks software dictionary files

I'm getting this error message when I try to access the Software
Dictionary in ConsoleOne > Inventory Service_ADMNT > Properties >
Software Inventory Configuration > Software Configuration
Error Loading Software Dictionary
Unable to parse the ZENworks software dictionary files.
Contact Novell Support (http://support.novell.com)
I was able get into it just a few minutes before that but now,
nothing... Thanks for your help.

E,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

"Unable to parse the opf file" of my book, what to do?

We have created a neat little eBook with iBooks Author, following all the specifications, keeping an eye on memory limits, etc., and using some of the widgets, but we are getting an error message when we try to submit the book through iTunes Producer, so we can't cross the finish line (after which there is a beer waiting, but not yet.)
This eBook process has taken us about one year to complete.
This is the error message that appears on the system: "Error ITMS-9000 'Unable to parse opf file container.xml' at Book.
I know a little bit about EPUBs, and I know this is not a playground-variety error message. So I need help.
There are a few threads out there that address this issue (but not really, more like people drowning and crying "help" while the sea whirl drags them down to the depths).
Here is the issue: Our file is not a standard EPUB file that you can whip up with Sigil, and then mess with the manifest; it is a fully loaded peacock authored and designed with iBooks Author, complete with sound files, widgets, etc. Hence my worry.
Any suggestions so that I can sleep tonight? They would be much appreciated.

Yep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally.
I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday.

Unable to parse the OData service in JSON

Hi,
Need to parse the OData Service in JSON format.Able to successfully get Service and MetaData documents. After that, when try to parse OData service returning response in JSON.
Below code is throwing exception.
Server Used:SMP3.0
ODATA SDK Used:SMP3.0 ODATA SDK
Service Used: http://services.odata.org/v2/Odata/Odata.svc/Products?$format=json
Code Snippet:
   @try {
      ODataCollection *collc = [[self.serviceDocument getSchema] getCollectionByName:_srvcInfo.serviceEntityName];
      ODataEntitySchema *schema = [collc getEntitySchema];
      //Instantiate parser for Carrier entity
     ODataDataParser *dataParser=[[ODataDataParser alloc] initWithEntitySchema:schemaandServiceDocument:self.serviceDocument];
      //Parses a feed or an entry xml or json
      [dataParser parse:entriesData];
      results = dataParser.entries;
@catch(NSException *e) {
      NSLog(@"Exception:%@, %@", e.description, e.debugDescription);
Exception:
-[__NSCFArray objectForKey:]: unrecognized selector sent to instance
However Service Used:http://services.odata.org/V3/Northwind/Northwind.svc/Products?$format=json. Not
throwing any exception, but dataParser.entries is returning 0 objects
Please let us know, is the same API is used for parsing JSON.
What can be the reason of issue and what are possible resolution.
Thanks,
Parveen.

My expert area is not IOS but you can check this IOS Odata development tutorial that might help you,Getting started with SMP3 Native OData iOS apps
Midhun VP

Unable to parse the ampersand "&" in the ESB

Hi
Getting the nullpointer exception when i invoke the ESB with the input data that contains "&".Can any one help me to resolve this issue.
thanks in advance.

Hi,
The & and < > characters are speical in XML. Try to start the ESB service with &amp; instead of &
marc
http://orasoa.blogspot.com

Unable to parse the xml file

I have a xml file with the xsd ,when i try to parse it using Xerces2-j i am getting an error msg like this
XML Document has Error:true cvc-complex-type.2.4.a: Invalid content was found starting with element 'Voyage'. One of '{"":Parties, "":Voyage, "":Carrier, "":Ports, "":Commodities}' is expected.
and mu xml file is
<?xml version = "1.0" encoding = "UTF-8"?>
     <ShipmentOrder
          AllocationNumber = "AL12345"
          CustomerReferenceNumber = "FORD123"
          OrderType = "NEW"
          ShipmentNumber = "USEDN12345"
          ShipmentType = "IMPORT">
     <Parties
          PartyName = "XYZ INC"
          PartyNumber = ""
          PartyType = "Shipper">
     <Address
          Address1 = "1234"
          Address2 = "Avenue Road"
          Address3 = ""
          City = "DETROIT"
          Country = "USA"
          State = "MI"
          ZIPCode = "098081"
          xmlns = "http://www.xyz.com//CDM/2009/v1.0"/>
     <Contact
          ContactPerson = "John Smith"
          ContactPoint = "7324120987"
          ContactType = "Work Phone"
          xmlns = "http://www.xyz.com//CDM/2009/v1.0"/>
     </Parties>
     <Voyage
          EndDate = ""
          FlagShipCountry = "INDIA"
          LlyodsCode = "12345467"
          StartDate = ""
          VesselCode = "PAZ"
          VesselName = "BLUESHIP"
          VoyageMode = "OCEAN"
          VoyageNumber = "NA2345-PAZ"
          xmlns = "http://www.xyz.com//CDM/2009/v1.0"/>
     <Carrier CarrierName = "XYZ OCEAN CARRIER" SCAC = "XYZO" TaxID = "" xmlns = "http://www.xyz.com//CDM/2009/v1.0"/>
     <Ports
          Code = "USBAL"
          Name = "BALTIMORE"
          Terminal = "TERMINAL1"
          TerminalName = "DUNDALK"
          Type = "LOAD">
          <Berth
          Code = "USBAL1"
          Name = "ATLANTIC TERMINAL"
          PierNumber = "19"
          Type = "LOAD"/>
     </Ports>
     <Ports Code = "BEZEE"
          Name = "ZEEBRUGE"
     Terminal = "TERMINAL C"
     TerminalName = "MASTER STEO"
     Type = "DISCHARGE">
          <Berth Code = "BEZEE4"
     Name = "BELGIAN TERMINAL"
     PierNumber = "12"
     Type = "DISCHARGE"/>
     </Ports>
     <Commodities BarCode = "123456" CommodityClass = "AUTO" CommodityCode = "8703000" CommodityDescription = "FORD 4X4 PICKUP TRUCK" CommodityType = "CAR" LadingLineItem = "1" LadingQuantity = "1" MarksandNumbers = "123456">
          <Weight UnitOfMeasurement = "KGS" UnitOfWeight = "GROSS" Weight = "1234"/>
          <Measurement CubicDimensions = "8" Height = "1.65" Length = "5" UnitOfMeasurement = "FEET" Width = "3"/>
          <ManufacturerDeatils CommodityDescription = "FORD 4X4 PICKUP TRUCK" MakeCode = "FORD" ManufacturerName = "FORD MOTOR CO" ModelCode = "TAURUS" ModelType = "LX" ModelYear = "2009"/>
          <HazardousDetails CalssificationDescription = "12" ClassificationCode = "124" ClassificationCodeQualifier = "W" FlashpointTemperature = "23" FlashpointUnitOfMeasurement = "C" MarinePollutant = "Y" MaterialCode = "N" MaterialDescription = "N" MaterialsPage = "N" PackagingGroupCode = ""/>
          <EquipmentDetails EquipmentNumber = "1234" EquipmentType = "CONTAINER"/>
     </Commodities>
</ShipmentOrder>
can any one help me out with the problem

jtahlborn wrote:
My guess is that it is a namespace issue. The ShipmentOrder element has no namespace, but the Voyage element has the namespace "http://www.xyz.com//CDM/2009/v1.0".
Yes, indeed. The posted error message does say that *"":Voyage* is one of the possible expected types, which must mean a Voyage element in no namespace.

Rep-0496 unable to parse the query

Hi ,
i am using developer 2000 2.1,
i am getting this error when i have tried to use the joins.
please change this below sql query to work in report 2.1.
select distinct table1.t$mitm bandPartsRoutingMitm, table2.t$dsca task,trim(table1.t$tano ||' '||table2.t$dsca) Description,table3.task from table1
join table2 on table1.t$cwoc = table2.t$cwoc
and table1.T$MITM='7366X55'
left outer join table3 on trim(table1.T$MITM)=table3.part
and trim(table3.t$srln$c)= 'Q444442'
and table3.Band='MMMT'
and table3.task =trim(table1.t$tano ||' '||table2.t$dsca);
it is working fine in SQL developer.
please help me.
Thanks,
Sateesh.

Hi, Sateesh,
Unless you post some sample data (CREATE TABLE and INSERT statements) for all the tables, and the results you want from that data, all I can do is guess at solutions. Guessing is not a very good way to solve problems.
My best guess right now is:
SELECT DISTINCT
        tables_1_2.bandPartsRoutingMitm
, tables_1_2.task
, tables_1_2.workCenterDescription
,       table3.task_3
FROM ( -- Begin in-line view tables_1_2
         SELECT table1.t$mitm bandPartsRoutingMitm
         ,      table2.t$dsca task
         ,     TRIM ( table1.t$tano
                    || ' '
                    || table2.t$dsca
                    ) workCenterDescription
         FROM    table1
         ,       table2
         WHERE   table1.t$cwoc = table2.t$cwoc
         AND     table1.T$MITM = '7366X55'
        )   tables_1_2
,       table3
WHERE   table3.part                = TRIM (tables_1_2.bandPartsRoutingMitm
AND     TRIM (table3.t$srln$c (+))   = 'Q444442'
AND     table3.Band                = 'MMMT'
AND     table3.part                = '7366X55'
AND     table3.task                  = tables_1_2.workCenterDescription
is how this site is displaying the outer join indicator, a + sign inside parentheses .
You can't really have a view with parameters, but you can do something almost as good: create a global temporary table to hold what would be the parameters, and join to that global temnporary table.

Unable to parse the given xml by unmarshalling it

Hi,
I have to fetch the data from xml to java object. I am using castor parsing. i have written mapping xml which is mapped against the xml from which data is to be fetched. The entire application is working fine.
The problem is if i have data like
<CampaignName>&<</CampaignName>
then the unmarshalling is gettig failed and dispalying error message as
"The entity name must immediately follow the '&' in the entity reference"
Actually the xml is valid against validation and is allowing to use &< combination as data. But it is requirement to use the same data.
Please help me to resolve this problem.
srinivas.

import java.io.BufferedReader;
import java.io.File;
import java.io.FileReader;
import java.io.StringReader;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.CharacterData;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.InputSource;
public class XMLParsingProj {
public static void main(String arg[]) throws Exception {
String xmlData = "";
FileReader fileReader = new FileReader(new File("XMLData.xml"));
BufferedReader bufReader = new BufferedReader(fileReader);
String xmlLine = "";
while ((xmlLine = bufReader.readLine()) != null) {
xmlData += xmlLine;
System.out.println("String Value is");
System.out.println(xmlData);
DocumentBuilder db = DocumentBuilderFactory.newInstance().newDocumentBuilder();
InputSource is = new InputSource();
is.setCharacterStream(new StringReader(xmlData));
Document doc = db.parse(is);
NodeList nodes = doc.getElementsByTagName("soap:Envelope");
for (int i = 0; i < nodes.getLength(); i++) {
Element element = (Element) nodes.item(i);
NodeList name = element.getElementsByTagName("soap:Body");
Element line = (Element) name.item(0);
System.out.println("Name: " + line.getTagName());
NodeList title = element.getElementsByTagName("lookupResponse");
line = (Element) title.item(0);
System.out.println("Status: " + line.getAttribute("status"));
System.out.println("data node length :" + nodes.getLength());
}

Unable to parse operation - BIP against JDE E1 with DAS

Hi to all,
I am in the following scenario:
BI Publisher 10.1.3.4.1 integrated with JdEdwards E1 through DAS (Data Access Server).
Then, using the connection that uses DAS, when I try tu use an outer join I get the following error:
Unable to parse the operation [SELECT ..... WHERE AN8=AN8()]
In the text editor where the query builder builds the query the '+' appears correctly...
If I launch the query without the outer join then it works correctly!!
This is quite urgent so any help would be appreciated.
Many thanks in advance,
Víctor.

Hello Victor,
you had the chance to fix the error?
me doing the same,
I'm also connected to a base JDE E1.
my query is:
Select
TO_DATE (substr(F0411.DGJ,2,6),'yydd') as DGJ,
F0411.KCO as KCO,
     F0411.DOC as DOC,
     F0411.DCT as DCT,
     F0411.AN8 as AN8,
     F0411.PYE as PYE,
     F0411.SNTO as SNTO,
     F0411.AAP as AAP,
     F0411.AG as AG,
     F0411.SFX as SFX,
     F0101.ALPH as ALPH
from     JDE.F0101 F0101,
     JDE.F0411 F0411
where F0411.AN8=F0101.AN8
and      F0411.DOC between :Doc_desde and :Doc_hasta
and F0411.DGJ between TO_NUMBER(TO_CHAR(:Fecha_Desde, 'YYYYDDD' )) - 1900000
and TO_NUMBER(TO_CHAR(:Fecha_Hasta, 'YYYYDDD' )) – 1900000
error is:
Unable to parse operation [select
         TO_DATE(substr(DGJ,2,6),'yydd') as DGJ,
         F0411.KCO as KCO,
      F0411.DOC as DOC,
      F0411.DCT as DCT,
      F0411.AN8 as AN8,
      F0411.PYE as PYE,
      F0411.SNTO as SNTO,
      F0411.AAP as AAP,
      F0411.AG as AG,
      F0411.SFX as SFX,
      F0101.ALPH as ALPH
from      JDE.F0101 F0101,
      JDE.F0411 F0411
where   F0411.AN8=F0101.AN8
and       F0411.DOC between ? and ?
and    F0411.DGJ between TO_NUMBER(TO_CHAR(?, 'YYYYDDD' )) - 1900000
         AND               TO_NUMBER(TO_CHAR(?, 'YYYYDDD' )) - 1900000].
why ??
is the version of the drivers connecting ??
thanks
JC

L755-S5244 - W7 system repair disc could not be created... unable to parse... XML data. (0x800705B9)

After creating a backup image of my W7 Toshiba laptop OK, the last step was the option to create a system repair disc. However that returned the following error:
System repair disc could not be created
Windows was unable to parse the requested XML data.
(0x800705B9)
Note this is *not* the same as "system recovery discs"! I already have a set of those discs which work OK.. What I need is a system repair disc which allows booting into special recovery mode to repair W7, to restore a backup image, etc.
Note that my computer is working fine. I just need to be able to make a system repair disc in case there are future problems. There always are, eventually.
In googling this problem, there are many reports of this error but no clear solution. Some of the reported fixes refer to microsoft help/support/social/technet links which no longer exist. I tried one of those suggestions, SFC /SCANNOW, which didn't find any system file errors on my computer. So that's not the cause.
It may have something to do with the OEM W7 version which Toshiba puts on its laptops such as my L755-S5244(?). It's possible that Toshiba has intentionally or accidentally disabled the normal commands to make a system repair disc in W7. Does anybody know for sure?
Thanks.

I did a fair amount of goggling and reading, then... I tried 3 different downloadable boot disks from maximumpcguides.com, spirebyte, and mydigitallife.info. They all work exactly the same. When booting from one of those discs, there are 5 options offered. I had to make text notes (below) because there's no way to make screen images in repair mode.
1) Startup Repair - apparently works OK, at least it went through the process and found no errors. That's as it should be, because this computer is working fine! My only objective here is to find out what can be done someday when it malfunctions, as all computers do eventually..
2) System Restore - doesn't work
big red X: "To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore." That makes no sense because I only have one Windows installation! This is an important option. Is there any way to access it when Windows 7 won't start normally?
3) System Image Recovery - It found the image file I had created previously. But I didn't want to risk it on a properly functioning computer (no reason). So I don't know if it will actually work right... someday when I really need it.
4) Windows Memory Diagnostic - doesn't work
"Windows cannot check for memory problems. An error is preventing Windows from checking for memory problems during startup. To run the Windows Memory Diagnostic manually, boot the computer from the Windows installation disc, and then select Windows Memory Diagnostic from the Windows Boot Manager menu." However there is no such thing as a Windows installation disc on Toshiba OEM W7. Or is there? Also, I can get to Windows Boot Manager by pressing f8 during startup then select Repair Your Computer, but it won't do anything. Again, it requests the Windows installation disc, which I don't have. Then at the end of all the verbiage... "... Status 0xc000000e; Info: The boot selection failed because a required device is inaccessible." It would be nice to run a good memory diagnostic because I just upgraded from 4G to 8G RAM. Suggestions?
5) Command Prompt - apparently works OK, at least it listed the directory when I entered "dir".
I feel that chances would be better if I could somehow get this W7 Toshiba laptop to make its own system repair disc, which goes full circle back to my original query... Can it be fixed to avoid the parse XML data error?

[orabpel_10.1.2.0.2_WL_solaris]: XMLScriptReader: unable to parse the provi

Similar Messages

Maybe you are looking for