Oracle 10g install using storage array

Hello,
If I was to install Oracle 10g DB on a RH Linux server could I use a storage array
for all my dbf, logs, control files etc ?
Thanks.

damorgan wrote:
If by storage array you mean SAN or NAS yes.
My recommendation, however, would be to put one control file on local disk.I hope the OP doesn't read that as a recommendation to have only one control file! ;-)
Better:
"My recommendation, however, would be to put one copy of your multiplexed control file on local disk."

Similar Messages

Running Oracle 9i client code against an Oracle 10g install on PC

On Unix I am able to run Oracle 9i client code against an Oracle 10g install by setting ORACLE_HOME to the Oracle 10g install location and then creating a symbolic link (example: ln -fs libclntsh.so.10.1 libclntsh.so.9.0).
On PC (in particular XP SP2) I want to do something similar without using "junctions" or "junction points". Is there a way to set an environment variable or ini file to have my 9i client code point to the right libraries? I keep getting an error saying that my client code will not run due to "orasql9.dll" not being found. The "orasql10.dll" is installed on my machine.
Any assistance would be appreciated.

You might want to check metalink doc,
Client / Server / Interoperability Support Between Different Oracle Versions
Doc ID: Note:207303.1
Even your application built on 9i, doesn't mean it will not work with 10g database. From what I can see, running 9i executable under 10g installation to create mixed blood breed will do more harm than good. Not only it's not supported but also the outcome is unpredictable.

. NET to call Oracle stored procedure, use an array of types of parameters

. NET to call Oracle stored procedure, use an array of types of parameters
Step1：(In the Oracle database define an array of types)
CREATE OR REPLACE TYPE STRING_VARRAY AS VARRAY (1000) OF NVARCHAR2(255)
Step2：
CREATE OR REPLACE PROCEDURE Test
(i_test in string_varray,o_result out int)
IS
BEGIN
o_result:=i_test.count;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
o_result:=0;
END arraytest;
Step3：
Use System.Data.OracleClient
C# Code:
OracleConnection conn = new OracleConnection("User Id=test;Password=test;Data Source=test");
OracleCommand cmd = new OracleCommand("Test", conn);
cmd.CommandType = CommandType.StoredProcedure;
string[] str = new string[] { "11", "22" };
OracleParameter p1 = new OracleParameter("i_test", OracleType.NVarChar);
p1.Direction = ParameterDirection.Input;
p1.Value = str;
cmd.Parameters.Add(p1);
OracleParameter p2 = new OracleParameter("o_result", OracleType.Int32);
p2.Direction = ParameterDirection.Output;
cmd.Parameters.Add(p2);
int i = 0;
try
conn.Open();
cmd.ExecuteNonQuery();
i =(int) p2.Value;
catch (Exception ex)
finally
conn.Close();
Error:
Execution Failed:ORA-06550:Line 1,Column 7:
PLS-00306:Test parameters when calling the number or types of errors
ORA-06550:Line 1,Column 7:
PL/SQL:Statement ignored
Edited by: user10133982 on Jun 4, 2009 7:13 AM

. NET to call Oracle stored procedure, use an array of types of parameters
The use of ODP.net(Oracle 10g), the error is still the same
Step1：(In the Oracle database define an array of types)
CREATE OR REPLACE TYPE STRING_VARRAY AS VARRAY (1000) OF NVARCHAR2(255)
Step2：
CREATE OR REPLACE PROCEDURE Test
(i_test in string_varray,o_result out int)
IS
BEGIN
o_result:=i_test.count;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN OTHERS
THEN
o_result:=0;
END arraytest;
Step3：
ODP.NET(Oracle 10g)
OracleConnection conn = new OracleConnection("User Id=test;Password=test;Data Source=test");
OracleCommand cmd = new OracleCommand("Test", conn);
cmd.CommandType = CommandType.StoredProcedure;
string[] str = new string[2] { "11", "222" };
cmd.ArrayBindCount=2;
OracleParameter p1 = new OracleParameter("i_test", OracleDbType.NVarChar);
p1.Direction = ParameterDirection.Input;
p1.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p1.Value = str;
p1.ArrayBindSize=new int[2]{2,3};
p1.ArrayBindStatus = new OracleParameterStatus[2]{
OracleParameterStatus.Success,
OracleParameterStatus.Success
cmd.Parameters.Add(p1);
OracleParameter p2 = new OracleParameter("o_result", OracleDbType.Int32);
p2.Direction = ParameterDirection.Output;
P2.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
p2.Value=0;
cmd.Parameters.Add(p2);
int i = 0;
try
conn.Open();
cmd.ExecuteNonQuery();
i =(int) p2.Value;
catch (Exception ex)
finally
conn.Close();
Error:
Execution Failed:ORA-06550:Line 1,Column 7:
PLS-00306:Test parameters when calling the number or types of errors
ORA-06550:Line 1,Column 7:
PL/SQL:Statement ignored
Edited by: user10133982 on Jun 5, 2009 7:48 AM

How to configure Oracle 10g to use 4GB memory

I'm trying to configure Oracle 10g to use >4GB memory. Have configured server boot.ini with required flags (/3GB /PAE). Rebooted server then created standard database, then connected to db instance and changed oracle parameters DB_BLOCK_BUFFERS, USE_INDIRECT_DATA_BUFFERS as required. Restarted DB instance, DB fails to restarted with SGA memory error. According to oracle user docs the SGA is nolonger in effect due to previous settings. Can you provide example of SPFILE with parameters settings that do work and use >4GB memory. Current server has 8GB, 2 x Dual XEON core/processors (i.e. 8 processors)

The recommended /3GB switches in the boot.ini file can only be used with the following operating systems editions (KB article 291988):
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Data Center Server
Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows Server 2003, Data Center Edition
Microsoft Windows Small Business Server 2003
Important: Windows 2000 and 2003 Server Standard Editions DO NOT SUPPORT /3GB Switch.
So if your OS is listed above, then you cannot have a larger SGA.

BLOB insertion in Oracle 10g database using ojdbc14 (10g drivers)

Hello!
I have a situation where I am trying to insert a blob data into oracle 10g database using oracle thin
10g drivers, ojdbc14.jar in weblogic 8.1 sp2. I have the following error happening very intermittently.
java.sql.SQLException: OALL8 is in an inconsistent state.
And this is leading to the "No more data to read from socket" error when I am trying to
insert the BLOB into the database. I have gone through the bug list of SP2 and have realised there is the
following issue fixed in SP3.
CR124933
An Oracle BLOB sometimes used a pooled connection after the connection pool determined that
the connection was available for reassignment.
Code was added to ensure the BLOB is completely processed before closing the pool connection or
ending the transaction.
I believe the problem arises when we try to insert BLOB into database using a refreshed connection
from the pool.We have upgraded weblogic 8.1 from SP2 to SP4 service pack inorder to come over the above problem.
But this still continues to behave intermittently.
We put ojdbc14.jar in our classpath and Weblogic startup classpath looks like the following :-
WLS_CLASSPATH=${WLS_DOMAIN_DIR}/appslib/server.jar:$PRE_CLASSPATH:${WLS_WEBLOGIC_HOME}/server/lib/weblogic.jar:
${WLS_WEBLOGIC_HOME}/server/lib/ojdbc14.jar:${WLS_WEBLOGIC_HOME}/server/lib:${WLS_JAVA_HOME}/lib/tools.jar:
${WLS_JAVA_HOME}/jre/lib/rt.jar:${WLS_WEBLOGIC_HOME}/server/lib/webservices.jar:${WLS_CONFIG_DIR}:
${WLS_CUSTLIB_DIR}:${WLS_BIN_DIR}:$POST_CLASSPATH
export WLS_CLASSPATH
CLASSPATH=${WLS_CLASSPATH}:${APP_CLASSPATH}
export CLASSPATH
After upgrade to SP4, there are new ojdbc14_g.jar(debug jar) and orai18n.jar jars in the ${WLS_WEBLOGIC_HOME}/server/ext/jdbc/oracle/10g directory added.
Please let me know if I need to update classpath with the new 10g jars in the ext/lib directory or any suggestions
to insert BLOB using the ojdbc14 10G drivers, Weblogic 8.1 environment would be appreciated.
Following is the stack trace of the errors that I recieve:
<Oct 6, 2005 1:29:36 PM EDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from DUAL" set up for pool
"MHUBPoolStage" failed with exception: "java.sql.SQLException: OALL8 is in an inconsistent state".>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <JDBC> <BEA-001128> <Connection for pool "MHUBPoolStage" closed.>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <JDBC> <BEA-001067> <Connection for pool "MHUBPoolStage" refreshed.>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <EJB> <BEA-010051>
java.rmi.RemoteException: TransactionRequestManager.requestTransaction():
Caught PersistnceException com.mortgagehub.busobj.PersistenceException: -5258: No more data to read from socket
Please let me know if there is anything that I am missing.
Thanks
Pradeep G

pradeep g wrote:
Hello!
I have a situation where I am trying to insert a blob data into oracle 10g database using oracle thin
10g drivers, ojdbc14.jar in weblogic 8.1 sp2. I have the following error happening very intermittently.
> java.sql.SQLException: OALL8 is in an inconsistent state.
And this is leading to the "No more data to read from socket" error when I am trying to
insert the BLOB into the database. I have gone through the bug list of SP2 and have realised there is the
following issue fixed in SP3.
> CR124933
An Oracle BLOB sometimes used a pooled connection after the connection pool determined that
the connection was available for reassignment.
Code was added to ensure the BLOB is completely processed before closing the pool connection or
ending the transaction.
> I believe the problem arises when we try to insert BLOB into database using a refreshed connection
from the pool.We have upgraded weblogic 8.1 from SP2 to SP4 service pack inorder to come over the above problem.
But this still continues to behave intermittently.
We put ojdbc14.jar in our classpath and Weblogic startup classpath looks like the following :-
> WLS_CLASSPATH=${WLS_DOMAIN_DIR}/appslib/server.jar:$PRE_CLASSPATH:${WLS_WEBLOGIC_HOME}/server/lib/weblogic.jar:
${WLS_WEBLOGIC_HOME}/server/lib/ojdbc14.jar:${WLS_WEBLOGIC_HOME}/server/lib:${WLS_JAVA_HOME}/lib/tools.jar:
${WLS_JAVA_HOME}/jre/lib/rt.jar:${WLS_WEBLOGIC_HOME}/server/lib/webservices.jar:${WLS_CONFIG_DIR}:
${WLS_CUSTLIB_DIR}:${WLS_BIN_DIR}:$POST_CLASSPATH
export WLS_CLASSPATH
CLASSPATH=${WLS_CLASSPATH}:${APP_CLASSPATH}
export CLASSPATH
> After upgrade to SP4, there are new ojdbc14_g.jar(debug jar) and orai18n.jar jars in the ${WLS_WEBLOGIC_HOME}/server/ext/jdbc/oracle/10g directory added.
> Please let me know if I need to update classpath with the new 10g jars in the ext/lib directory or any suggestions
to insert BLOB using the ojdbc14 10G drivers, Weblogic 8.1 environment would be appreciated.
> Following is the stack trace of the errors that I recieve:
> <Oct 6, 2005 1:29:36 PM EDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from DUAL" set up for pool
"MHUBPoolStage" failed with exception: "java.sql.SQLException: OALL8 is in an inconsistent state".>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <JDBC> <BEA-001128> <Connection for pool "MHUBPoolStage" closed.>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <JDBC> <BEA-001067> <Connection for pool "MHUBPoolStage" refreshed.>
<Oct 6, 2005 1:29:36 PM EDT> <Info> <EJB> <BEA-010051>
java.rmi.RemoteException: TransactionRequestManager.requestTransaction():
Caught PersistnceException com.mortgagehub.busobj.PersistenceException: -5258: No more data to read from socket
Please let me know if there is anything that I am missing.
> Thanks
> Pradeep GHi. This is something we'd like to diagnose. How is your application
getting using and closing pool connections? The initial symptom
seems to be an internal oracle problem... Are you using standard
JDBC or oracle-specific calls?
Joe

Oracle 10g RAC using ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Need a clarification here...what do you mean by "Storage System"...do you mean a server/node or the SAN storage system. If you are referring to a server/node's local storage, then it would NOT be possible for use by RAC, since the disk space has to be shared among the nodes.
Here is what you can do:
- Create two partitions/devices (for example Disk_1 and Disk_2) in the SAN storage
- Create a ASM disk group which would mirror Disk_1 to Disk_2.
Again, please note that the partitions have to be visible and be accessible read/write from both the nodes/servers.
HTH
Thanks
Chandra Pabba

Oracle 10g RAC+ASM - Storage Issue

I’ve an issue related to Oracle 10g RAC.
I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
I’ve EMC CX300 SAN storage with following partitions
/orasoft     10 Gb          OCFS2 File system
/oracrs          2 Gb          OCFS2 File system
/orabackup      100 Gb          OCFS2 File system
The datafiles are on ASM which is not directly visible in OS.
I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
I’ve faced an issue recently related to EMC storage.
The /orasoft partition displays 1.4 Gb space available using df command.
With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
Is this setup correct ??
Can anyone help me with this storage issue ??

Hi,
If you create a new diskgroup you may be to add the same diskgroup to parameter file or spfile and which will be needing down time.
sugestion: Instead of creating new diskgroup you should to add disk to existing group.if you add asm disk to existing group your all problem will be solved and Oracle itself will be managing all.And than i am sure no need to add entry in the parameter or spfile like +db_create_file_dest=.....
regards,
Sher khan

Oracle 10g installing on Oracle EL, getting ORA-12157 error?

My boss is getting really impatient. I have tried installing Oracle 10g on... Oracle EL, CentOS 4, Fedora 4, Fedora 5, and I get the same error on them alll...
ORA-12157: TNS: internal network communication error
This occurs during the end phase of the installation, when it says "Clone database creation". Network seems to be working, can ping the server, static IP, all that?
Any help appreciated, I've been working on this for 5 days.
Jon

Verbatim, this error means:
ORA-12157:     TNS:internal network communication error
Cause:     Internal error during network communication.
Action:     Not normally visible to the user. For further details, turn on tracing and reexecute the operation. If error persists, contact Worldwide Customer Support.Have you met all requirements before proceeding with installation? Do you have all required patches? Is there any warnng during the prerrequisites verifying routine? Is there any outstanding issue recorded on your install log file?
I suggest you, after verifying above points, to go ahead wiht a software only installation, next, using the network and databse assistants perform a network configuration and a database creation, this way you'll be able to isolate the source of the problem and go ahead with a specific troubleshootig.

Oracle 10g install error, FC5

Im trying to install Oracle 10g on Fedora Core 5 (as per here: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php).
But having problems.
The install process starts fine, then stops.
Here's the last few lines of "installActions2006-03-20"
INFO:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en,'. Received the value from response file.
INFO:
*** Specify Local Host Name Page***
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :"/u01/app/oracle/oraInventory/logs/installActions2006-03-20_04-11-37PM.log"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.err"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.out"
And here's the contents of "oraInstall.....err":
Exception java.lang.NoClassDefFoundError occurred..
java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiin.OiinNetOps.computeHostInfo(OiinNetOps.java:230)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:78)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:89)
at oracle.sysman.oii.oiif.oiifw.OiifwHostNameWCDE.initialize(OiifwHostNameWCDE.java:111)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:152)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:424)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1921)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2149)
Can anyone help me?
Thanks.
Mike

I have tried installing 10g several times and it keeps failing. You said that the document is complete and the installation works fine. I would love to know how you got your installation to work because I am getting the same problem that this guy ran into.
Re: Oracle 10g R2 on FC5; ORA-12157 error on installation
Here is just a small part of the errors I am getting in my log file.
==========================================================
Heap at VM Abort:
Heap
def new generation total 576K, used 369K [0xaba00000, 0xabaa0000, 0xabee0000)
eden space 512K, 65% used [0xaba00000, 0xaba54388, 0xaba80000)
from space 64K, 51% used [0xaba90000, 0xaba98398, 0xabaa0000)
to space 64K, 0% used [0xaba80000, 0xaba80000, 0xaba90000)
tenured generation total 1408K, used 550K [0xabee0000, 0xac040000, 0xafa00000)
the space 1408K, 39% used [0x
abee0000, 0xabf69af0, 0xabf69c00, 0xac040000)
compacting perm gen total 4096K, used 3564K [0xafa00000, 0xafe00000, 0xb3a00000)
the space 4096K, 87% used [0xafa00000, 0xafd7b3d8, 0xafd7b400, 0xafe00000)
Local Time = Sun Apr 30 02:20:24 2006
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid13937.log.
# Please refer to the file for further information.
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/app/oracle/product/10.2.0/db_1
Configuration directory is set to /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

How to know whether my oracle 10g instalation in unicode supported or not

Hi
i am new to oracle. I have installed Oracle 10g client and server.
I want to know whether the database created can store unicode data/arabic data.
Please guide me how can i find whether unicode support is on for my db or not.
The outputs of some of the queries run by me are as follows:
SQL> HOST ECHO $NLS_LANG;
$NLS_LANG
SQL> HOST ECHO %NLS_LANG%;
%NLS_LANG%
SQL> @.[%NLS_LANG%];
SP2-0310: unable to open file ".[AMERICAN_AMERICA.WE8MSWIN1252]"
SQL> select cust_eng_name,cust_arb_name from custmast;
select cust_eng_name,cust_arb_name from custmast
ERROR at line 1:
ORA-00942: table or view does not exist
Please reply me asap.

user10817093 wrote:
1. Yeh that is the thing I want. What are the other steps that i need to do with my Oracle Client/Server for unicode support.
Where i am getting trouble is the Oracle Client/Server unicode support.
And how to decide what character set will suite me best.1. If your application is going to be a "true" Unicode application, you can set the NLS_LANG registry/environment setting on your clients to ".UTF8" to enable true Unicode support.
2. Your database needs to support Unicode, too.
The recommended database character set for this in 10g is "AL32UTF8".
If you currently have a single-byte database character set (WE8MSWIN1252), you need to decide how to get this done.
If you can simply create a new database using the "AL32UTF8" character set, this would be the easiest way.
There are several documents available (e.g. on Oracle MetaLink) that describe in detail how to convert the character set of an existing database. Depending on your data this can be a tedious task involving several steps, so may be creating a new database and exporting/importing the data might be the simplest choice if you need to migrate some existing data.
The recommended national character set is "AL16UTF16", by the way, but that shouldn't matter that much once you have a Unicode enabled database using "AL32UTF8" as database character set.
2. How to set/retrive the "Database Character Set" and "National Character Set". This has already been answered partly. Retrieve:
Database Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';National Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_NCHAR_CHARACTERSET';In most of the cases you can't just simply set/alter the character sets, as outlined above.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Using scatter graph type in oracle 10g forms using bi beans

hi.. how i can use scatter graph type in oracle 10g using bi beans..
it seems scatter graph is supported in 10g but it doesnt work at all..
i used to use oracle graphics builder in oracle 6i forms,now i need to convert all my old graphs to 10g forms..the line,bar and pie it work very well but the scatter didnt work..
so please if anyone know how to use it please tell me.. and what versions of bi beans support the scatter graph type
thanks.
u can email me in
[email protected]

Hi,
What version of Oracle Forms are you using? If it is 10.1.2.0.2 (10g R2 Phase 2) then the BI Beans version should be 10.1.2.1 (3.2.2.0.24.2).
When you run a Graph, do you see any version numbers?
Regardless of the version, scatter graph should work. What kind of errors are you getting?
When you install BI Beans in JDeveloper, you get access to BI Beans Help. Go to the following topic for setting up data for a scatter graph:
Help -> Building Applications with BI Beans -> Presenting Data in Graphs -> Specifying Data for Graphs
Did you try posting your question on the Oracle Forms forum?
BI Beans PM

Oracle 10G installed Enterprise manager not working

Hi Guys
I have installed oracle 10g on my laptop having enterprise linux 4(on VM Ware) . All the things are working fine when i use database using sqlplus, but i am not able to start enterprise manager. the first time i started the database i was able to start enterprise manager.
please help.....

Yes when i start dbconsole i get a url i click on that the mozilla opens but ... i get message page cannot be displayed..

Need to configure Enterprise Manager after Oracle 10g installed on Windows7

I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AM

889075 wrote:
I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AMBTW, V10 Oracle is unsupported
which version of Oracle to 4 decimal places?
which edition of Windows 7?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Oracle 10g Install

Hi there,
Please is there any reason why Oracle 10g should not be install to the Program Files Folder?
Thanks

What about if you use Progra~1. It works fine, What I wanted was it the and funtionalit issues or problems or have it in Program Files.
Thanks
Kofi

Oracle 10g installed properly on Mac OS X 10.3.8, but when rebooted failed.

Hello All,
Just installed last night the Oracle 10g on my Powerbook 17" 1.33ghz, Mac OS X 10.3.8, 1GB RAM, with sufficient diskspace.
I met all the requirements first (well not actually all, my Mac OS X is not the server version), then followed the installation guide for Mac OS X, and it was successfull.
I was able to pull-up all the URLs including the http:/host:5500/em, played around the sqlplus from my terminal--love it!!
Now, my problem occured when I shutdown my powerbook and realized the next morning that, not one from the oracle services was up. So, I started it manually from the terminal using "su - oracle", and then STARTUP by the SYS as SYSDBA. It started properly, and I can mess around with all the databases and tables from the sqlplus. But the URLs are not still running, and my Aqua Data Studio can't connect either as client, it was running properly during that night.
Could somebody please help me identify what script to manually invoke to run web services so that I could play with the URLs.
Thank you.

Hi Julio,
don't forget to add lsnrctl start
Ronald.
http://homepage.mac.com/ik_zelf/oracle

Oracle 10g install using storage array

Similar Messages

Maybe you are looking for