Oracle 10g to SQL Server 2012

Hi,
We are planning to upgrade our SAP. Our environment: Windows Server 2003, ERP ECC 6, Oracle 10g.
Am looking for guides to migrate our Oracle database to SQL Server 2012.
With new server, may I know how to convert our data from oracle to SQL Server 2012?
Thank you.

Hi,
First place to start
https://websmp207.sap-ag.de/OSDBMIGRATION
Then check PAM to ensure the direction and versions you want to migrated are supported https://websmp207.sap-ag.de/pam.
Please check link here.
http://scn.sap.com/docs/DOC-8324
In marketplace you can also use the guidefinder, for your versions this should be correct.
https://websmp209.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000085733&_SCENARIO=01100035870000000202&
Kind Regards,
Johan

Similar Messages

Replication of table from Oracle 10g to sql server 2000

Could i replicate table from Oracle 10g to sql server online. we have tables with same configuration and if any change happen in oracle 10g or sql server in that table we need to replicate that change to other database.
What is the solution for this two way replication between sql server and Oracle 10g

But the tutorial is saying that i will have to install Oracle database on the server already having sql server, is it client or whole database, if it is then it will acquire lot of resource.
I want to find out that for Heterogenous Service ODBC, we need third party software for ODBC Driver of SQL SERVER for Linux and secondly if we use Transparent Gateway then what are the steps for its configuration.
I could not find steps of configuration of Transoparent gateway, when i am trying to install Transparent gateway from Universal installer, it is not there. where do i find it , Do i need to purchase it too.

Oracle 10g to sql server 2005 - how to setup

Hi,
I have been searching on how to setup a connection from oracle 10g to sql server 2005 and i have to admit i am struggling a bit.
I have read about Heterogeneous Services and Database Gateway but we really dont want to fork for licence fees so it looks like i have to investigate HS.
My environment is:
10gR2 Linux 32 bit
SQL Server 2005 32bit.
Would someone be able to provide me with a list of steps to help me get this setup?
Thanks.
B

Hi,
If you don't want to pay for any licence fees then you will have to use the 11g Database Gateway for ODBC (DG4ODBC) which is included in your RDBMS license.
You need to use the 11g versions because all previous gateway versions have been desupported for some time. The latest version is 11.2.0.3 which can be downloaded from My Oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
and download -
p10404530_112030_platform_5of7.zip
- this is the Gateway media pack and has everything needed for a standalone gateway install.
This version is certified the following RDBMS versions - 10.1.0.5 + RDBMS patch 5965763, 10.2.0.3 + RDBMS patch 5965763, 10.2.0.4, 10.2.0.5, all 11.1 versions, all 11.2 versions.
You have 2 choices about where you can install it and it would be better to install the gateway into a new and separate ORACLE_HOME from any existing Oracle installs -
1. On the Linux 32-bit platform where the RDBMS is running. If you install it here you will need to supply a third party ODBC driver. The only free one I am aware of is from FreeTDS but there may be others. There can be problems with the FreeTDS so another one may be preferable but these usually require a license fee.
See this note in My Oracle Support -
How to Configure DG4ODBC on Linux x86 32bit or on HP-UX RISC (DG4ODBC 11.1 only) to Connect to Non-Oracle Databases post install (Doc ID 466228.1)
2. Install DG4ODBC on the Windows platform where SQL*Server is running. If you install on Windows then you will be able to use the Microsoft SQL*Server ODBC driver which should already be installed. See this note on My Oracle Support -
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit (Doc ID 466225.1)
If you don't have access to My Oracle Support you will need to contact someone in your organisation to access the notes for you or review the gateway documentation -
http://www.oracle.com/pls/db112/homepage
Regards,
Mike

How do you compare Oracle 10G with SQL Server 2005?

exept for performance and pricing...
We haven't decide to upgrade SQL Server 2000 to SQL Server 2005 or buy more license for Oracle 10G...
Any comments are welcome!

OK I only came here because of APC's referral down the piece (I was curious where all the hits came from - cheers Andrew). Comments embedded anyway
Thanks Gaff!
* Staff Experience with product - how flexible is
your staff?
--Staff need to learn sth. new...:)That's a fair motivation if recruitment and retention of staff is an issue - if you want reliability giving business systems to people who don't know the tech is a rather foolish move.
* Current product use Corporation/group - if you have
15 SQL Server boxes and no Oracle, what is the
impetus for change? Same if you have 15 Oracle boxes
and no SQL Server ones.
--80% SQL server and 20% Oracle. We are thinking to
balance to 50%-50%.I'm curious as to the reasoning behind this? I don't really see what the benefit is.
* Features - Do you want/need text handling
capabilities? Data mining? Storage of non-text
records? XML?
--I think both of DB system can do these.They can
* Scalability - Is one Windows box going to meet your
needs or do you need to scale (now or eventually) to
multiple boxes of multiple CPUs?
--This is really a benefit feature of Oracle better
than SQL Server.SQLServer scales - it just scales in a different way (federated databases vs RAC).
Thank u for ur US$.02Are you evaluating the platform for an in-house development or a database neutral application - if the latter I'd be sorely tempted to find out what the development platform is or read the docs for clues. For example we are looking at a product that supports SQLServer,MSDE and Oracle. In the FAQ "how do I choose between SQLServer and MSDE?", if we do implement it will be on an MS platform.
I consider this probably the most crucial factor since SQLServer and Oracle have different architectural features they tend to generate different development approaches - porting one to the other nearly always hurts the new platform. Plus if I need support I'd be hoping that I got a bug fix from a developer and not from a developer whose fix was then ported.
The same applies to in-house dev obviously, but there at least you can hire people with the right skillset for the app development.
Cheers
Niall Litchfield
Oracle DBA
http://www.niall.litchfield.dial.pipex.com

ORA-28545 Between ORACLE 10G and SQL SERVER 2008

Hi All,
i'am doing heterogeneous connectivity as oracle 10G (Unbreakable linux4) to sql server (SQL SERVER 2008)
The DSN and the connections works ok (FreeTDS and UniXODBC).
I create the dblink
create database link inforpyme connect to "sa" identified by " " using 'INFORPYME';
and when I do select * from "sysobjects"@inforpyme I get the next error:
ORA-28545: error diagnosticado por Net8 al conectar a un agente
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a INFORPYME
This is my listener:
IBK =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY=PNPKEY))
SID_LIST_IBK =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ibk)
(ORACLE_HOME = /App/oracle/ora10g2)
(SID_NAME = ibk)
(SID_DESC=
(SID_NAME=inforpyme)
(ORACLE_HOME=/App/oracle/ora10g2)
(PROGRAM=hsodbc)
My tnsnames:
INFORPYME =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME=inforpyme))(HS=OK)
The TNSping gets
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME=inforpyme))(HS=OK))
OK (0 msec)
and the initINFORPYME.ora:
HS_FDS_CONNECT_INFO = inforpyme
HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_FILE_NAME = /tmp/freetds.trc
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
# ODBC specific environment variables
set ODBCINI=/usr/local/etc/odbc.ini
Anybody may help me? Thanks

Sorry i think has been a misunderstanding
this is my /App/oracle/ora10g2/network/admin/listener.ora
IBK =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY=PNPKEY))
SID_LIST_IBK =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ibk)
(ORACLE_HOME = /App/oracle/ora10g2)
(SID_NAME = ibk)
(SID_DESC=
(SID_NAME=inforpyme)
(ORACLE_HOME=/App/oracle/ora10g2)
(PROGRAM=hsodbc)
I stop a start and this is the status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-SEP-2012 13:18:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 25-SEP-2012 13:16:40
Uptime 0 days 0 hr. 1 min. 49 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /App/oracle/ora10g2/network/admin/listener.ora
Listener Log File /App/oracle/ora10g2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ovm1ora.drvsa.com)(PORT=1521)))
Services Summary...
Service "ibk" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
Service "ibkXDB" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
Service "ibk_XPT" has 1 instance(s).
Instance "ibk", status READY, has 1 handler(s) for this service...
The command completed successfully
i don'nt know why doesn't appears the service inforpyme, this it normal?

Urgent:db link from oracle 10g to sql server 2000

Hi
I have a db link 10g from oracle to sql server 2000. This was created a couple of years ago. This is working.
I have now created another db link from same oracle server to the same sql server but it is not working.
But I am getting ORA-28500 and IM002 error
.Please advise.
I am unable to understand what is wrong because I have followed the hs odbc set up on this db link in the same way as I had done 2 yrs ago.
Thanks
Shailaja

Just sorted the problem.
Basically I am using HSODBC to communicate from Oracle (on windows 2003 64 bit) to SQL Server.
To do this, I need to create a ODBC connection from Oracle to SQL Server.
HSODBC is a 32 bit application and hence we have to use the ODBC 32 bit driver when we create the ODBC connection.
When I created the ODBC connection from Oracle to SQL Server, I was using the ODBC 64 bit driver and hence the system was unable to find the data source name.
I have now created ODBC connection from Oracle to SQL Server using the ODBC 32 bit driver and everything works fine now.
No offence to anyone but as you all work using Oracle software , I was hoping a better response than some of the above responses. You can just say that you didnt understand the question or you dont know the reason why that happened.
I just listed how the problem was sorted so that any one in future having the same problem can benefit.

Oracle 10g to SQL Server

Hi All,
We have established a connection between ORacle and SQL Server, When I query in TOAD. It works fine
e.g. this statement works fine in TOAD:
select * from JDETAIL@ex_test
But when I try to execute the following statement from PL/SQL BLOCK. It gives me following error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
The token <BEGIN TRANSACTION> is not allowed in pass through mode
v_sqlstr :=
'begin transaction update JDETAIL set interfacedate = getdate() where company ='
|| v_company
|| ' and Recordnumber= '
|| TO_NUMBER (v_recordNumber)
|| ' COMMIT TRANSACTION';
num_rows :=
DBMS_HS_PASSTHROUGH.execute_immediate@ex_test (v_sqlstr);
Thanks
J

You don't need a begin transaction in the passthrough statement as the gateway by default starts its own transaction and autocommit is also disabled - so once you've executed the update in a passthrough statement do not forget to commit/rollback the statement.

HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2

Hi,
I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from SCOPEX.WORLD
My Config files:
On Sun Sparc 5.9 where Oracle server is running.
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
Listener.ora file on Windows machine:
TelemetryDB1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_TelemetryDB1 =
(SID_LIST=
(SID_DESC=
(SID_NAME=TelemetryDB1)
(ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
(PROGRAM=hsodbc)
Tnsnames.ora file:
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
HS_FDS_CONNECT_INFO = TelemetryDB1
HS_FDS_TRACE_LEVEL = OFF
We have created DNS with TelemetryDB1.
I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
Please advise me to rectify the error. We've been working for the last couple of weeks.
Regards,
Sunil

Sunil,
You don't need an Oracle ODBC driver.
The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
However, there are a couple of problems with your actual setup -
- the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
- 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
There is more information in the following note available on My Oracle Support (MOS) -
Note.1083703.1 Master Note for Oracle Gateway Products
The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
p10098816_112020_platform_4of6.zip
However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
Have a look at -
Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
But remember this is not a supported version or configuration and you should be using Dg4ODBC.
Regards,
Mike

Moving table from oracle 10g to sql server 2005 plz help!!!

Hi All,
I have a table in oracle that i have to move to sql server.
I have exported the table and the dmp file is around 150 MB.
I do not know how to import this file into sql server.
Can some one kindly update me as to which is the best way to do this,
i know the best people to answer this would be the sql server techs but just wanted to try my luck on OTN.
regards,

Hello,
you could use the Database Gateway for MS SQL Server, create a database link that uses the gateway, and then transfer the data from Oracle to SQL Server using in SQLPlus a command like the following:
copy from scott/tiger@ora102 -
insert TEST1@dg4msql -
using select * from test1@ora102 ;
Another solution is using a PL/SQL block, and how to do it is described in the following note in My Oracle Support:
"Insert Into Remote Table Select * From Local Table" Gives Error ORA-02025 Using DG4MSQL (Doc ID 790572.1)
I don't know whether it is the "best way to do it", but it is an alternative.
For inserting a flat file into SQL Server you really need to check with Microsoft. Or you can use 3rd party software: http://www.dbload.com/
Best regards
Wolfgang

Comparing Oracle and MS SQL Server 2005

Hi!
I'm looking for documents which compare
features, price etc og the database and database related development-projects
I'm looking for resources that describe the terminology used of MS and Oracle for their db's.
I'm also looking for "Feuerstein"-best-practices in MS-world.
And at last I'm looking for simple and complex scenarios comparing performance/features of these db's.
And if possible, I want them from some "independent" sources...
Can anyone help?
Best regards
Bjorn Dorr Jensen

Hi Hans!
I think it would not be fair comparing Oracle 10g with SQL Server 2000.
So thats why I'm looking for comparison with SQL Server 2005,
but if you have something that compare Oracle 11 with SQL Server 2005,
let me hear about it :-)
The objective:
well, the last 2 years I worked with Oracle DB (tuning, pl/sql) in an serious manner.
and now I have to work with SQL Server (which I didn't work with the last 2 years),
so I'm interested in the differences.
For now it seems that many SQL Server features are primitive compared with Oracle, but Microsofts usability is much better.
O1.) But is it really more primitive or are I'm missing the nessessary experience with SQL Server? Thats some of the points I want to find out.
O2.) Analyzing our own requirements for features: when would it be better to use Oracle and when to use MS? How to make this measure-able?
Could one make an descision tree like:
when more than x users/day and clustering needed and db_size>y....
O3.) Should I promote in an environment with people only using MS-products,
promote the use of Oracle-DB? When will this be an good idea?
(I don't think it will be an good idea the other way around: moving from Oracle to MS SQL Server - or would it ;^)
Best Regards
Bjorn

Read Oracle 10g Tables to SQL Server 2012

Hi all,
I have Oracle 10g on an XP machine, and use the 'Oracle in OraDB10g_home1' driver to read the data. I have another Windows Server 2008 R2 machine on the same network, with SQL Server 2012 on it. What is the best way to read Oracle Tables in SQL Server? Can I setup an ODBC link from my Windows Server machine to the Oracle Database (which would require me to download an Oracle ODBC driver)? Or is the best way to export the required tables from Oracle (e.g. into csv format) and import them into SQL?
Thanking you in advance,
Imelda.

987575 wrote:
Hi all,
I have Oracle 10g on an XP machine, and use the 'Oracle in OraDB10g_home1' driver to read the data. I have another Windows Server 2008 R2 machine on the same network, with SQL Server 2012 on it. What is the best way to read Oracle Tables in SQL Server? Can I setup an ODBC link from my Windows Server machine to the Oracle Database (which would require me to download an Oracle ODBC driver)? Or is the best way to export the required tables from Oracle (e.g. into csv format) and import them into SQL?
Thanking you in advance,
Imelda.You should use Heterogeneous Services
Following is a demonstration in ASKTOM to connect from Oracle to Excel, You can use the same to connect to SQL Server.
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:4406709207206#18830681837358

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Oracle forms 9i/10g connecting SQL Server 2000

Could anyone please guide me in detail to connect Oracle Forms 9i/10g with MS SQL Server database?
To connect with Oracle Database, we need to copy and paste the tnsnames.ora file from the Oracle Database folder to the Oracle Forms folder.
But how do i connect with other databases like SQL Server, MS Access, and so on?
Thanks in advance.

Follwoing is the soluton which I got from orafaq forum:
<<<<<
I'd go for an ODBC on the database server, using HSODBC. It worked quite well on a data warehouse project using OWB. I fail to see why it wouldn't work for Forms.
MHE
>>>>>
Now I'm fully in a confused and frustrated state. Each person is saying different solutions for the problem. One person is saying to connect using ODBC driver while other is saying to connect JDBC driver. Actually which driver should I configure? Also no one is giving a clear picture for the problem.
How can I get a detailed solution for this problem (with screen shots) which include step by step procedure to configure a driver?
So, I would be pleased if you could please guide me with step by step procedure to get connected with Oracle Forms using SQL Server?
Or atleast some reference site where I can find the same.
Thanks.

CDC for Oracle Continually goes to Aborted State - SQL Server 2012

I am setting up a test environment for CDC with an Oracle system. I have everything set up to the point where logs are being read and data appears to be getting added to the CDC tables in SQL Server. However, at different times during the day,
the status of the service goes to Aborted and the service is completely stopped. The first time I start the service, it will run for about 1 hour, before it aborts. After that, it only takes 2 or 3 minutes, sometimes less, before this happens again.
Below are the last entries in the log when the instance aborted. Whenever the instance aborts, the last message is always "Reading Complementary records for large log miner SQL_REDO/SQL_UNDO". I'm guessing there's a permission or setting
in Oracle that I'm missing, but I don't know what it is.
Version information:
Oracle: 10.2.0.5.0
CDC Service: SQL Server 2012 SP 1
SQL Server Database Engine: 11.0.3128
record","source","","0xDD070A00170012001C0004000043073800000000000000000626001100F8DD3A00000000061474B6B30100000100012B190000CC8E01340000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C0004004085163800000000000000000626002F00E2DD3A00000000061474B6B40100000100012B190000CCA201C40000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400C009353800000000000000000026002F00E2DD3A00000000061474B6B50100000100012B190000CCA500A00000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400408E533800000000000000000026001100F8DD3A00000000061474B6B70100000100012B190000CCAF00440000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C00040080D0623800000000000000000626002D00DBDD3A00000000061474B8780100000100012B19000108B500280000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C0004000055813800000000000000000626001500E0DD3A00000000061474B8790100000100012B19000108C7003C0000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C00040080D99F3800000000000000000026001500E0DD3A00000000061474B87A0100000100012B19000108C901140000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400C01BAF3800000000000000000026002D00DBDD3A00000000061474B87C0100000100012B19000108D301540000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading Complementary records for large log miner SQL_REDO/SQL_UNDO","source","",""

Here are the permissions we have set up on the Oracle side: (Please forgive the poor formatting. The editor wants to remove all of the spaces and add extra carriage returns.)
GRANT
EXECUTE
ON
"SYS"."DBMS_LOGMNR"
TO
"LOGREADER";
GRANT
EXECUTE
ON
"SYS"."DBMS_LOGMNR_D"
TO
"LOGREADER";
grant
select
any
transaction
to
logreader;
GRANT
"CONNECT"
TO
"LOGREADER";
GRANT
select
ON
sys.v_$database
to
"LOGREADER";
GRANT
select
ON
sys.v_$logmnr_contents
to
"LOGREADER";
GRANT
select ON
sys.v_$logmnr_dictionary
to
"LOGREADER";
GRANT
selectONsys.v_$logmnr_logfileto"LOGREADER";
GRANT
selectONsys.v_$logmnr_logsto"LOGREADER";
GRANT
selectONsys.v_$logmnr_parametersto"LOGREADER";
GRANT
selectONsys.v_$logmnr_sessionto"LOGREADER";
GRANT
selectONsys.v_$logmnr_transactionto"LOGREADER";
GRANT
selectONsys.v_$logto"LOGREADER";
GRANT
selectONsys.v_$logfileto"LOGREADER";
GRANT
selectONsys.v_$archived_logto"LOGREADER";
GRANT
select
ON
sys.dba_registry
to
"LOGREADER";
GRANT
select
ON
sys.v_$instance
to
"LOGREADER";
GRANT
select
ON
sys.v_$thread
to
"LOGREADER";
GRANT
select
ON
sys.v_$parameter
to
"LOGREADER";
For each table we want to capture changes on, select rights have been granted to this user, as well.

SQL Server 2012 Change Data Capture for Oracle by Attunity support for Oracle 12

I would like to know if there are any plans for SQL Server 2012 Change Data Capture for Oracle by Attunity to support versions of Oracle 12 and if by when.

I have asked from the author of
http://blogs.msdn.com/b/mattm/archive/2012/03/26/cdc-for-oracle-in-sql-server-2012.aspx about this.
I will either ask him to answer here or I would be a messenger.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Oracle 10g to SQL Server 2012

Similar Messages

Maybe you are looking for