Oracle 11 on CentOS 5.1

While running the Oracle install, the "Checking Network Configuration Requirements" fails. Or to be precise, it says that it did not execute. I see the following in the log file.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Actual Result: Unknown Host Exception has Occurred :ganymede.localdomain: ganymede.localdomain.
Check complete. The overall result of this check is: Not executed
End error message. The system is configured with a static IP, and the hosts file looks as follows;
127.0.0.1 localhost.localdomain localhost
192.168.1.1 router
$ hostname
ganymede.localdomain
The error message is rather cryptic, "Unknown Host Exception has Occurred". Can anyone give me suggestions as to how debug this?

Where is 'ganymede' in your hosts file? If not in the hosts file, how do you resolve ganymede to the local host?

Similar Messages

Problem Installation Oracle 10g Centos 5

Hello everyone!
I tell them my problem:
last week I'm trying to install 10g oragle realese 2 on linux. At first attempt to install on Ubuntu 11.10 but came to the installation and always had binding problems, I always look for a missing library every forum and never knew what it was. In previous versions of Ubuntu I never had problem. Another thing I do simulate linux on virtualbox.
To all this, I decided to throw out Ubuntu and I read that the distribution Centos 5 was a clone of Red Hat distribution, so, install linux all over again.
Install linux, I saw all the documentation of oracle 10g, I saw the notes on the installation, I did all the prerequisites, download the libraries that read the notes. and install it when I get this
oracle@localhost database]$ ./runInstaller -ignoreSysPrereqs
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-03-22_12-00-42AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-03-22_12-00-42AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
If anyone could help me, I appreciate it.
Sorry for my English.
regards

user9930565 wrote:
Hello everyone!
removed long whine
>
oracle@localhost database]$ ./runInstaller -ignoreSysPrereqs
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-03-22_12-00-42AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-03-22_12-00-42AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryit appears to be a problem involving X-Windows
does the xclock utility work for you?
OUI will fail when xclock fails to run OK

Arch or CloudLinux, RHEL, SLES, Oracle Linux, CentOS, Debian, Gentoo

I use Arch as my everyday OS but I've been developing a few sites with Django and Ruby on rails and wondering what OS would be best suited for a server environment.
I'm building a custom dedicated box as well I'm not going to spend hundreds of dollars per month for dedicated hosting in which if you know what you're doing you're better off on your own + it's free once you have your box.
I've used Gentoo, Arch, and SUSE(OpenSUSE) as OSs and Suse seems very stable as SLES is generally OpenSUSE with it's server tools but updates aren't as quick which is ideal for a server environment.
With Gentoo or Arch you have to constantly update every month or every week, with gentoo I don't want to deal with mainly because of it's compile times which offer..really nothing over arch in terms of performance and even stability at this point which begs the question. Is source compiling even worth it? Even compiling from source with Arch is 10X quicker then gentoo.
For Servers though I would consider Arch but the constant updating freaks me out as an IT, Gentoo makes me want to jump off the ledge, Suse, CentOS, Oracle Linux, or even RedHat have less frequent updates and are made for the server and oh forgot about CloudLinux(cheap compared to suse or redhat per year. 14/mo 168/yr.) I've heard good things about Cloud Linux as well.
For a server is Arch a good option?

Rukiri wrote:
I use Arch as my everyday OS but I've been developing a few sites with Django and Ruby on rails and wondering what OS would be best suited for a server environment.
I'm building a custom dedicated box.....I've used Gentoo, Arch, and SUSE(OpenSUSE).....
For Servers though I would consider Arch but the constant updating freaks me out as an IT, Gentoo makes me want to jump off the ledge, Suse, CentOS, Oracle Linux, or even RedHat have less frequent updates and are made for the server .....
For a server is Arch a good option?
My experience with Arch suggests that it would be a poor choice for a server; it'll break. Sure, if you're competent you'll fix it. But it WILL break.
If you are comfortable with Arch I would consider CRUX. It is pretty darn sweet. Simpler. Much simpler. Custom built no-modules kernel. Source-based ports system, prt-get is nice (when you do have to update some software doing it from source will allow you to keep a stable core, i.e. you "backport" new versions). pkg-get could serve binaries to your server from your build machine.
Consider this minecraft server done with CRUX, http://minecraft.codeemo.com/index.html. There's a CRUX live CD http://cruxex.exton.net/. I know that Judd Vinet had wanted Arch to be useful as a server but even he questioned whether his team would be able to invent a way to spin off a stable release. Well, there is no stable release and Arch has become quite baroque compared to those early days. CRUX would be the pure Arch of yesteryear that can make an awesome server.

Oracle. CentOS 6.2. NETCA. Use another port number.

Hello! I know that oracle is not supported Centos.
But question is why netca can not use standart port, or any other port.
OS and oracle run in vmware. Network NAT. Os is run without X server. But it connect on ssh with other OS with X server.
P.S.
Sorry if my English is bad for you.
Edited by: 948645 on 25.07.2012 3:24

948645 wrote:
Hello! I know that oracle is not supported Centos.
But question is why netca can not use standart port, or any other port.
OS and oracle run in vmware. Network NAT. Os is run without X server. But it connect on ssh with other OS with X server.
P.S.
Sorry if my English is bad for you.
Edited by: 948645 on 25.07.2012 3:24lsnrctl start
above will succeed when NO listener.ora file exists
in other words, you do not need to run netca.

Oracle 10g installing on Oracle EL, getting ORA-12157 error?

My boss is getting really impatient. I have tried installing Oracle 10g on... Oracle EL, CentOS 4, Fedora 4, Fedora 5, and I get the same error on them alll...
ORA-12157: TNS: internal network communication error
This occurs during the end phase of the installation, when it says "Clone database creation". Network seems to be working, can ping the server, static IP, all that?
Any help appreciated, I've been working on this for 5 days.
Jon

Verbatim, this error means:
ORA-12157:     TNS:internal network communication error
Cause:     Internal error during network communication.
Action:     Not normally visible to the user. For further details, turn on tracing and reexecute the operation. If error persists, contact Worldwide Customer Support.Have you met all requirements before proceeding with installation? Do you have all required patches? Is there any warnng during the prerrequisites verifying routine? Is there any outstanding issue recorded on your install log file?
I suggest you, after verifying above points, to go ahead wiht a software only installation, next, using the network and databse assistants perform a network configuration and a database creation, this way you'll be able to isolate the source of the problem and go ahead with a specific troubleshootig.

Download oracle 11g/10g for red hat linux

hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO.
could you please tell me whcih linux version i have to install which support oracle for linux.
from where i get that
-linux installation files
-oracle installation files
both the above will install on oracle vm ware
thanks
Edited by: hard_stone on Sep 30, 2009 11:33 PM

hard_stone wrote:
hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO. Red Hat, Centos and Oracle Enterprise Linux are almost identical. The major differences are:
- Red Hat and Oracle Enterprise Linux are officially supported by Oracle to be used under Oracle products;
- CentOS is NOT officially supported
- the newer Oracle Enterprise Linux (OEL) includes an 'oracle-validate' rpm to reduce configuration guessing
Each Distro has it's purpose. I use SUSE and OpenSUSE for my office. And for general servers I use RedHat (when I need commercial support) and CentOS. I fully support CentOS and the CentOS community effort.
However, for the past year I have ONLY used Oracle Enteprise Linux under Oracle product. It is free, it is officially supported, if I need commercial support I can get it, and it has the Oracle Validated RPM to minimize my config effort. http://edelivery.oracle.com
So, as compared to the other respondent - I encourage using OEL and NOT CentOS.

Oracle 10GR2 + Linux

I'm planning to install Linux & Oracle 10GR2 into my Dell server at home that I bought so I can learn Oracle. Could anyone recommend what Linux should I install work best with Oracle 10GR2 and where should I download for free.
Thanks in advance,
Vu

There are Linux distributions which are certified for Oracle SW (Redhat EL, SuSE ES, Asianux) but I think they are not downloadable for free (in full not just eval. vesion).
But there are distributions which you can download for free and there you can run Oracle.
Centos, WhiteBox Linux - there are distributions completely built from original RH EL packages.
I got good experience with Oracle on mainstrem distributions as Fedora and Suse.
Of course these distributions are not certified for Oracle products but Oracle is running fine on them.
But I think you could use whatever of Linux distribution.
Here is link for installation papers&tips http://www.oracle.com/technology/tech/linux/install/index.html
Here is link to site which is tracking almost all Linux distributions and there you can find links for download - http://www.distrowatch.com

Error in loading dmp file

while loading a.dmp file into oracle in centos using impdp command following errors seen Can any body help me.....?
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation

Hi;
while loading a.dmp file into oracle in centos using impdp command following errors seen Can any body help me.....?Centos is not certified platform
Export: Release 10.2.0.1.0 - Production on Wednesday, 01 November, 2006 1:51:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operationSee:
Export/Import DataPump Parameter DIRECTORY - How to Specify a Directory [ID 266875.1]
ORA-39002,ORA-39070,ORA-29283 When Modifying The Group That Has Access To DataPump directory [ID 552783.1]
Regard
Helios

Unable to find Oracle OCI libraries on Centos 6.3

Hello,
I am having an issue with configuring an application(Zabbix) to use OCI on clean image of CentOS 6.3.
checking for Oracle OCI headers in /usr/include/oracle/11.1/client/... yes
checking if Oracle OCI version is >= 10.0... yes
checking for Oracle version >= 11.x to use -lnnz11 flag... yes
checking for Oracle OCI libraries in /usr/lib/oracle/11.1/client/lib/... not found
checking if Oracle support is enabled... no
I try to perform configuration of the source like this:
$ ./configure with-oracle with-oracle-include=/usr/include/oracle/11.1/client with-oracle-lib=/usr/lib/oracle/11.1/client/lib enable-server enable-agent enable-java
config.log has this:
configure:7084: result: no
configure:7089: checking for architecture
configure:7128: result: linux (linux-gnu)
configure:7132: checking for the linux kernel version
configure:7139: result: 2.6 family (2.6.32-279.el6.x86_64)
configure:7810: checking for Oracle OCI headers in /usr/include/oracle/11.1/client
configure:7837: gcc -c -g -O2 -I/usr/include/oracle/11.1/client conftest.c >&5
configure:7837: $? = 0
configure:7846: result: yes
configure:7878: checking if Oracle OCI version is >= 10.0
configure:7895: result: yes
configure:7913: checking for Oracle version >= 11.x to use -lnnz11 flag
configure:7919: result: yes
configure:7941: checking for Oracle OCI libraries in /usr/lib/oracle/11.1/client/lib
configure:7961: gcc -o conftest -g -O2 -I/usr/include/oracle/11.1/client -rdynamic -L/usr/lib/oracle/11.1/client/lib conftest.c -lm -lrt -lresolv -lclntsh -lnnz11 >&5
/usr/bin/ld: skipping incompatible /usr/lib/oracle/11.1/client/lib/libclntsh.so when searching for -lclntsh
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
configure:7961: $? = 1
configure: failed program was:
| /* confdefs.h */
result of *'rpm -qa | grep oracle'* is:
oracle-instantclient11.1-odbc-11.1.0.7.0-1.i386
oracle-instantclient11.1-basic-11.1.0.7.0-1.i386
oracle-instantclient11.1-sqlplus-11.1.0.7.0-1.i386
oracle-instantclient11.1-devel-11.1.0.7.0-1.i386
oracle-instantclient11.1-tools-11.1.0.7.0-1.i386
oracle-instantclient11.1-jdbc-11.1.0.7.0-1.i386
result of *'ls -l /usr/lib/oracle/11.1/client/lib'* is:
total 136808
-rw-r--r--. 1 root root 342 Oct 26 2008 glogin.sql
lrwxrwxrwx. 1 root root 17 Feb 28 16:43 libclntsh.so -> libclntsh.so.11.1
-rw-r--r--. 1 root root 37174788 Oct 26 2008 libclntsh.so.11.1
-rw-r--r--. 1 root root 11159 Oct 26 2008 libheteroxa11.so
-rw-r--r--. 1 root root 5974910 Oct 26 2008 libnnz11.so
lrwxrwxrwx. 1 root root 15 Feb 28 16:43 libocci.so -> libocci.so.11.1
-rw-r--r--. 1 root root 2333632 Oct 26 2008 libocci.so.11.1
-rw-r--r--. 1 root root 85112897 Oct 26 2008 libociei.so
-rw-r--r--. 1 root root 129297 Oct 26 2008 libocijdbc11.so
-rw-r--r--. 1 root root 1510045 Oct 26 2008 libsqlplusic.so
-rw-r--r--. 1 root root 1122713 Oct 26 2008 libsqlplus.so
-rw-r--r--. 1 root root 771229 Oct 26 2008 libsqora.so.11.1
-rw-r--r--. 1 root root 1890499 Oct 26 2008 ojdbc5.jar
-rw-r--r--. 1 root root 1988051 Oct 26 2008 ojdbc6.jar
-rw-r--r--. 1 root root 1656243 Oct 26 2008 orai18n.jar
-rw-r--r--. 1 root root 82979 Oct 26 2008 orai18n-mapping.jar
-rw-r--r--. 1 root root 299638 Oct 26 2008 ottclasses.zip
result of *'uname -a'* is:
Linux localhost.localdomain 2.6.32-279.el6.x86_64 #1 SMP Fri Jun 22 12:19:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Any help would be appreciated.

Oracle is NOT certified on Centos
V11.1 Oracle is NOT certified on V6 kernel
so You're On Your Own (YOYO)!

Trouble adding regular oracle oci8 support to RPM, CentOs 5

Hello,
It seems that i'm missing smth simple while trying to add oci8 support to RPM.
I took Christopher Jones's SRPM for 5.2.3 as a base, but since i don't have and don't need a support for instant client i modified latest available 5.1.6 SRPM from CentOS 5 repo.
The compile env is :
HOSTNAME=server.home
SHELL=/bin/bash
TERM=vt100
HISTSIZE=1000
OLDPWD=/root
USER=root
LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.0/db_1/lib
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
TNS_ADMIN=/u01/app/oracle/product/10.2.0/db_1/network/admin
MAIL=/var/spool/mail/root
PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
INPUTRC=/etc/inputrc
PWD=/usr/src/redhat/SPECS
LANG=en_US.UTF-8
SHLVL=1
HOME=/root
LOGNAME=root
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
G_BROKEN_FILENAMES=1
_=/bin/envi compile as a root. Here is my spec file.
%define contentdir /var/www
%define apiver 20041225
%define zendver 20050922
%define pdover 20060409
# AZ
# Version of Instant Client RPM. [email protected] May 2007
%define ociver 10.2.0.3
# For testing OCI8 and PDO_OCI. Use the password of the SYSTEM schema
# and the connection string for the target
# database. [email protected] May 2007
%define oci8_test_system_password tiger
%define oci8_test_connection_string localhost/lhome
# Set oci8_test_local_db to TRUE when the Oracle DB is on the machine
# building the RPMS. Otherwise set it to FALSE.
# [email protected] May 2007
%define oci8_test_local_db TRUE
#AZ
Summary: The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor)
Name: php
Version: 5.1.6
Release: 15%{?dist}
License: The PHP License v3.01
Group: Development/Languages
URL: http://www.php.net/
Source0: http://www.php.net/distributions/php-%{version}.tar.gz
Source50: php.conf
Source51: php.ini
Patch1: php-5.1.4-gnusrc.patch
Patch2: php-5.1.4-warnings.patch
Patch5: php-4.3.3-install.patch
Patch6: php-5.0.4-norpath.patch
Patch7: php-4.3.2-libtool15.patch
Patch13: php-5.0.2-phpize64.patch
Patch14: php-5.1.6-ecalloc.patch
# Fixes for extension modules
Patch21: php-4.3.1-odbc.patch
Patch22: php-4.3.11-shutdown.patch
# Functional changes
Patch30: php-5.0.4-dlopen.patch
Patch31: php-5.0.0-easter.patch
# Fixes for tests
Patch50: php-5.0.4-tests-dashn.patch
Patch51: php-5.0.4-tests-wddx.patch
# Security fixes
Patch70: php-4.3.9-CVE-2006-5465.patch
Patch71: php-5.1.6-CVE-2007-0906-imap.patch
Patch72: php-4.3.9-CVE-2007-0906-strreplace.patch
Patch73: php-4.3.9-CVE-2007-0907.patch
Patch74: php-4.3.9-CVE-2007-0908.patch
Patch75: php-4.3.9-CVE-2007-0909-odbc.patch
Patch76: php-4.3.9-CVE-2007-0909-printf.patch
Patch77: php-5.1.6-CVE-2007-0910.patch
Patch78: php-4.3.9-CVE-2007-0988.patch
Patch79: php-5.1.6-CVE-2007-1285.patch
Patch80: php-5.1.6-CVE-2007-1583.patch
Patch81: php-5.1.6-CVE-2007-0455.patch
Patch82: php-5.1.6-CVE-2007-1001.patch
Patch83: php-5.1.6-CVE-2007-1718.patch
Patch84: php-5.1.6-CVE-2007-1864.patch
Patch85: php-5.1.6-soapredir.patch
Patch86: php-5.1.6-ftpcrlf.patch
Patch87: php-5.1.6-CVE-2007-2872.patch
Patch88: php-5.1.6-CVE-2007-4658.patch
Patch89: php-5.1.6-CVE-2007-2756.patch
Patch90: php-5.1.6-CVE-2007-3799.patch
Patch91: php-5.1.6-CVE-2007-3996.patch
Patch92: php-5.1.6-CVE-2007-4670.patch
Patch93: php-5.1.6-CVE-2007-3998.patch
BuildRoot: %{_tmppath}/%{name}-root
BuildRequires: bzip2-devel, curl-devel >= 7.9, db4-devel, expat-devel
BuildRequires: gmp-devel, aspell-devel >= 0.50.0
BuildRequires: httpd-devel >= 2.0.46-1, libjpeg-devel, libpng-devel, pam-devel
BuildRequires: libstdc++-devel, openssl-devel, sqlite-devel >= 3.0.0
BuildRequires: zlib-devel, pcre-devel >= 4.5, smtpdaemon
BuildRequires: bzip2, fileutils, file >= 4.0, perl, libtool >= 1.4.3, gcc-c++
Obsoletes: php-dbg, php3, phpfi, stronghold-php
# Enforce Apache module ABI compatibility
Requires: httpd-mmn = %(cat %{_includedir}/httpd/.mmn || echo missing-httpd-devel)
Requires: file >= 4.0
Provides: mod_php = %{version}-%{release}
Requires: php-common = %{version}-%{release}
# For backwards-compatibility, require php-cli for the time being:
Requires: php-cli = %{version}-%{release}
%description
PHP is an HTML-embedded scripting language. PHP attempts to make it
easy for developers to write dynamically generated webpages. PHP also
offers built-in database integration for several commercial and
non-commercial database management systems, so writing a
database-enabled webpage with PHP is fairly simple. The most common
use of PHP coding is probably as a replacement for CGI scripts.
The php package contains the module which adds support for the PHP
language to Apache HTTP Server.
%package cli
Group: Development/Languages
Summary: Command-line interface for PHP
Requires: php-common = %{version}-%{release}
Provides: php-cgi = %{version}-%{release}
Provides: php-pcntl
%description cli
The php-cli package contains the command-line interface
executing PHP scripts, /usr/bin/php, and the CGI interface.
%package common
Group: Development/Languages
Summary: Common files for PHP
Provides: php-api = %{apiver}, php-zend-abi = %{zendver}
# Provides for all builtin modules:
Provides: php-bz2, php-calendar, php-ctype, php-curl, php-date, php-exif
Provides: php-ftp, php-gettext, php-gmp, php-hash, php-iconv, php-libxml
Provides: php-mime_magic, php-openssl, php-pcre, php-posix, php-pspell
Provides: php-reflection, php-session, php-shmop, php-simplexml, php-sockets
Provides: php-spl, php-sysvsem, php-sysvshm, php-sysvmsg, php-tokenizer
Provides: php-wddx, php-zlib
#AZ
Provides: php-oci
#AZ
Obsoletes: php-openssl
%description common
The php-common package contains files used by both the php
package and the php-cli package.
%package devel
Group: Development/Libraries
Summary: Files needed for building PHP extensions.
Requires: php = %{version}-%{release}, autoconf, automake
Obsoletes: php-pecl-pdo-devel
%description devel
The php-devel package contains the files needed for building PHP
extensions. If you need to compile your own PHP extensions, you will
need to install this package.
%package imap
Summary: A module for PHP applications that use IMAP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: mod_php3-imap, stronghold-php-imap
BuildRequires: krb5-devel, openssl-devel, libc-client-devel
%description imap
The php-imap package contains a dynamic shared object (DSO) for the
Apache Web server. When compiled into Apache, the php-imap module will
add IMAP (Internet Message Access Protocol) support to PHP. IMAP is a
protocol for retrieving and uploading e-mail messages on mail
servers. PHP is an HTML-embedded scripting language. If you need IMAP
support for PHP applications, you will need to install this package
and the php package.
%package ldap
Summary: A module for PHP applications that use LDAP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: mod_php3-ldap, stronghold-php-ldap
BuildRequires: cyrus-sasl-devel, openldap-devel, openssl-devel
%description ldap
The php-ldap package is a dynamic shared object (DSO) for the Apache
Web server that adds Lightweight Directory Access Protocol (LDAP)
support to PHP. LDAP is a set of protocols for accessing directory
services over the Internet. PHP is an HTML-embedded scripting
language. If you need LDAP support for PHP applications, you will
need to install this package in addition to the php package.
%package pdo
Summary: A database access abstraction module for PHP applications
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: php-pecl-pdo-sqlite, php-pecl-pdo
Provides: php-pdo-abi = %{pdover}
%description pdo
The php-pdo package contains a dynamic shared object that will add
a database access abstraction layer to PHP. This module provides
a common interface for accessing MySQL, PostgreSQL or other
databases.
%package mysql
Summary: A module for PHP applications that use MySQL databases.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Provides: php_database, php-mysqli
Obsoletes: mod_php3-mysql, stronghold-php-mysql
BuildRequires: mysql-devel >= 4.1.0
%description mysql
The php-mysql package contains a dynamic shared object that will add
MySQL database support to PHP. MySQL is an object-relational database
management system. PHP is an HTML-embeddable scripting language. If
you need MySQL support for PHP applications, you will need to install
this package and the php package.
%package pgsql
Summary: A PostgreSQL database module for PHP.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Provides: php_database
Obsoletes: mod_php3-pgsql, stronghold-php-pgsql
BuildRequires: krb5-devel, openssl-devel, postgresql-devel
%description pgsql
The php-pgsql package includes a dynamic shared object (DSO) that can
be compiled in to the Apache Web server to add PostgreSQL database
support to PHP. PostgreSQL is an object-relational database management
system that supports almost all SQL constructs. PHP is an
HTML-embedded scripting language. If you need back-end support for
PostgreSQL, you should install this package in addition to the main
php package.
#AZ
# Added oci8. [email protected] May 2007
%package oci8
Summary: A module for PHP applications using the Oracle database
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
#BuildRequires: oracle-instantclient-devel = %{ociver}
Provides: php_database, php-oci
AutoReqProv: No
%description oci8
The php-oci8 package contains a dynamic shared object (DSO) for the
Apache Web server. When compiled into Apache, the php-oci8 module will
add OCI8 support to PHP. OCI8 is an extension for Oracle Database
access. PHP is an HTML-embedded scripting language. If you need
Oracle support for PHP applications, you can install this package and
the php package.
This package also contains PDO_OCI for use with the PDO extension.
#AZ
%package odbc
Group: Development/Languages
Requires: php-common = %{version}-%{release}, php-pdo
Summary: A module for PHP applications that use ODBC databases.
Provides: php_database
Obsoletes: stronghold-php-odbc
BuildRequires: unixODBC-devel
%description odbc
The php-odbc package contains a dynamic shared object that will add
database support through ODBC to PHP. ODBC is an open specification
which provides a consistent API for developers to use for accessing
data sources (which are often, but not always, databases). PHP is an
HTML-embeddable scripting language. If you need ODBC support for PHP
applications, you will need to install this package and the php
package.
%package soap
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Summary: A module for PHP applications that use the SOAP protocol
BuildRequires: libxml2-devel
%description soap
The php-soap package contains a dynamic shared object that will add
support to PHP for using the SOAP web services protocol.
%package snmp
Summary: A module for PHP applications that query SNMP-managed devices.
Group: Development/Languages
Requires: php-common = %{version}-%{release}, net-snmp
BuildRequires: net-snmp-devel
%description snmp
The php-snmp package contains a dynamic shared object that will add
support for querying SNMP devices to PHP. PHP is an HTML-embeddable
scripting language. If you need SNMP support for PHP applications, you
will need to install this package and the php package.
%package xml
Summary: A module for PHP applications which use XML
Group: Development/Languages
Requires: php-common = %{version}-%{release}
Obsoletes: php-domxml, php-dom
Provides: php-dom, php-xsl, php-domxml
BuildRequires: libxslt-devel >= 1.0.18-1, libxml2-devel >= 2.4.14-1
%description xml
The php-xml package contains dynamic shared objects which add support
to PHP for manipulating XML documents using the DOM tree,
and performing XSL transformations on XML documents.
%package xmlrpc
Summary: A module for PHP applications which use the XML-RPC protocol
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: expat-devel
%description xmlrpc
The php-xmlrpc package contains a dynamic shared object that will add
support for the XML-RPC protocol to PHP.
%package mbstring
Summary: A module for PHP applications which need multi-byte string handling
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description mbstring
The php-mbstring package contains a dynamic shared object that will add
support for multi-byte string handling to PHP.
%package ncurses
Summary: A module for PHP applications for using ncurses interfaces
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: ncurses-devel
%description ncurses
The php-ncurses package contains a dynamic shared object that will add
support for using the ncurses terminal output interfaces.
%package gd
Summary: A module for PHP applications for using the gd graphics library
Group: Development/Languages
Requires: php-common = %{version}-%{release}
BuildRequires: gd-devel, freetype-devel
%description gd
The php-gd package contains a dynamic shared object that will add
support for using the gd graphics library to PHP.
%package bcmath
Summary: A module for PHP applications for using the bcmath library
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description bcmath
The php-bcmath package contains a dynamic shared object that will add
support for using the bcmath library to PHP.
%package dba
Summary: A database abstraction layer module for PHP applications
Group: Development/Languages
Requires: php-common = %{version}-%{release}
%description dba
The php-dba package contains a dynamic shared object that will add
support for using the DBA database abstraction layer to PHP.
%prep
%setup -q
%patch1 -p1 -b .gnusrc
%patch2 -p1 -b .warnings
%patch5 -p1 -b .install
%patch6 -p1 -b .norpath
%patch7 -p1 -b .libtool15
%patch13 -p1 -b .phpize64
%patch14 -p1 -b .ecalloc
%patch21 -p1 -b .odbc
%patch22 -p1 -b .shutdown
%patch30 -p1 -b .dlopen
%patch31 -p1 -b .easter
%patch50 -p1 -b .tests-dashn
%patch51 -p1 -b .tests-wddx
%patch70 -p1 -b .cve5465
%patch71 -p1 -b .cve0906-imap
%patch72 -p1 -b .cve0906-strreplace
%patch73 -p1 -b .cve0907
%patch74 -p1 -b .cve0908
%patch75 -p1 -b .cve0909-odbc
%patch76 -p1 -b .cve0909-printf
%patch77 -p1 -b .cve0910
%patch78 -p1 -b .cve0988
%patch79 -p1 -b .cve1285
%patch80 -p1 -b .cve1583
%patch81 -p1 -b .cve0455
%patch82 -p1 -b .cve1001
%patch83 -p1 -b .cve1718
%patch84 -p1 -b .cve1864
%patch85 -p1 -b .soapredir
%patch86 -p1 -b .ftpcrlf
%patch87 -p1 -b .cve2872
%patch88 -p1 -b .cve4658
%patch89 -p1 -b .cve2756
%patch90 -p1 -b .cve3799
%patch91 -p1 -b .cve3996
%patch92 -p1 -b .cve4670
%patch93 -p1 -b .cve3998
# Prevent %%doc confusion over LICENSE files
cp Zend/LICENSE Zend/ZEND_LICENSE
cp TSRM/LICENSE TSRM_LICENSE
cp regex/COPYRIGHT regex_COPYRIGHT
cp ext/gd/libgd/README gd_README
# Source is built twice: once for /usr/bin/php, once for the Apache DSO.
mkdir build-cgi build-apache
# Remove bogus test; position of read position after fopen(, "a+")
# is not defined by C standard, so don't presume anything.
rm -f ext/standard/tests/file/bug21131.phpt
# Tests that fail.
rm -f ext/standard/tests/file/bug22414.phpt \
      ext/iconv/tests/bug16069.phpt
#AZ
# Tests that fail.
rm -f ext/oci8/tests/bug27303.phpt \
        ext/oci8/tests/bug27303_2.phpt \
        ext/oci8/tests/bug27303_4.phpt
# OCI8 config file. [email protected] May 2007
cat <<EOF > ext/oci8/tests/details.inc
<?php
* Please, change user, password and dbase to match your configuration.
\$user       = "scott";
\$password   = "%{oci8_test_system_password}";
\$dbase      = "%{oci8_test_connection_string}";
/* Set this variable to TRUE if Oracle is installed @ localhost */
\$oracle_on_localhost = %{oci8_test_local_db};
?>
EOF
#AZ
# Safety check for API version change.
vapi=`sed -n '/#define PHP_API_VERSION/{s/.* //;p}' main/php.h`
if test "x${vapi}" != "x%{apiver}"; then
   : Error: Upstream API version is now ${vapi}, expecting %{apiver}.
   : Update the apiver macro and rebuild.
   exit 1
fi
# Safety check for Zend API version change.
vzend=`sed -n '/#define ZEND_MODULE_API_NO/{s/^[^0-9]*//;p;}' Zend/zend_modules.h`
if test "x${vzend}" != "x%{zendver}"; then
   : Error: Upstream Zend module ABI version is now ${vzend}, expecting %{zendver}.
   : Update the zendver macro and rebuild.
   exit 1
fi
# Safety check for PDO ABI version change
vpdo=`sed -n '/#define PDO_DRIVER_API/{s/.*[    ]//;p}' ext/pdo/php_pdo_driver.h`
if test "x${vpdo}" != "x%{pdover}"; then
   : Error: Upstream PDO ABI version is now ${vpdo}, expecting %{pdover}.
   : Update the pdover macro and rebuild.
   exit 1
fi
%build
# Force use of system libtool:
libtoolize force copy
cat `aclocal --print-ac-dir`/libtool.m4 > build/libtool.m4
# Regenerate configure scripts (patches change config.m4's)
./buildconf --force
CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing -Wno-pointer-sign"
CPPFLAGS="-DLDAP_DEPRECATED=1"
export CFLAGS CPPFLAGS
# Install extension modules in %{_libdir}/php/modules.
EXTENSION_DIR=%{_libdir}/php/modules; export EXTENSION_DIR
# Set PEAR_INSTALLDIR to ensure that the hard-coded include_path
# includes the PEAR directory even though pear is packaged
# separately.
PEAR_INSTALLDIR=%{_datadir}/pear; export PEAR_INSTALLDIR
# Shell function to configure and build a PHP tree.
build() {
# bison-1.875-2 seems to produce a broken parser; workaround.
mkdir Zend && cp ../Zend/zend_{language,ini}_{parser,scanner}.[ch] Zend
ln -sf ../configure
%configure \
        --cache-file=../config.cache \
        --with-libdir=%{_lib} \
        --with-config-file-path=%{_sysconfdir} \
        --with-config-file-scan-dir=%{_sysconfdir}/php.d \
        --disable-debug \
        --with-pic \
        --disable-rpath \
        --without-pear \
        --with-bz2 \
        --with-curl \
        --with-exec-dir=%{_bindir} \
        --with-freetype-dir=%{_prefix} \
        --with-png-dir=%{_prefix} \
        --enable-gd-native-ttf \
        --without-gdbm \
        --with-gettext \
        --with-gmp \
        --with-iconv \
        --with-jpeg-dir=%{_prefix} \
        --with-openssl \
        --with-png \
        --with-pspell \
        --with-expat-dir=%{_prefix} \
        --with-pcre-regex=%{_prefix} \
        --with-zlib \
        --with-layout=GNU \
        --enable-exif \
        --enable-ftp \
        --enable-magic-quotes \
        --enable-sockets \
        enable-sysvsem enable-sysvshm --enable-sysvmsg \
        --enable-track-vars \
        --enable-trans-sid \
        --enable-yp \
        --enable-wddx \
        --with-kerberos \
        --enable-ucd-snmp-hack \
        --with-unixODBC=shared,%{_prefix} \
        --enable-memory-limit \
        --enable-shmop \
        --enable-calendar \
        --enable-dbx \
        --enable-dio \
        --with-mime-magic=%{_sysconfdir}/httpd/conf/magic \
        --without-sqlite \
        --with-libxml-dir=%{_prefix} \
        --with-oci8=$ORACLE_HOME \
        --with-apxs2=/usr/sbin/apxs \
        --with-xml \
        $*
if test $? != 0; then
tail -500 config.log
: configure failed
exit 1
fi
make %{?_smp_mflags}
# Build /usr/bin/php-cgi with the CGI SAPI, and all the shared extensions
pushd build-cgi
build --enable-force-cgi-redirect \
      --enable-pcntl \
      with-imap=shared with-imap-ssl \
      enable-mbstring=shared enable-mbstr-enc-trans \
      --enable-mbregex \
      --with-ncurses=shared \
      --with-gd=shared \
      --enable-bcmath=shared \
      enable-dba=shared with-db4=%{_prefix} \
      --with-xmlrpc=shared \
      --with-ldap=shared \
      --with-mysql=shared,%{_prefix} \
      --with-mysqli=shared,%{_bindir}/mysql_config \
      --enable-dom=shared \
      --with-dom-xslt=%{_prefix} --with-dom-exslt=%{_prefix} \
      --with-pgsql=shared \
      --with-snmp=shared,%{_prefix} \
      --enable-soap=shared \
      --with-xsl=shared,%{_prefix} \
      enable-xmlreader=shared enable-xmlwriter=shared \
      --enable-fastcgi \
      --enable-pdo=shared \
      --with-pdo-odbc=shared,unixODBC,%{_prefix} \
      --with-pdo-mysql=shared,%{_prefix} \
      --with-pdo-pgsql=shared,%{_prefix} \
      --with-pdo-sqlite=shared,%{_prefix} \
#      --with-pdo-oci=shared,$ORACLE_HOME \
      --with-oci8 \
       --enable-sigchild
popd
# Build Apache module, and the CLI SAPI, /usr/bin/php
pushd build-apache
build --with-apxs2=%{_sbindir}/apxs \
      without-mysql without-gd \
      without-odbc disable-dom \
      disable-dba without-unixODBC \
      disable-pdo disable-xmlreader --disable-xmlwriter
popd
%check
cd build-apache
# Run tests, using the CLI SAPI
export NO_INTERACTION=1 REPORT_EXIT_STATUS=1 MALLOC_CHECK_=2
unset TZ LANG LC_ALL
#AZ
# Allows PDO_OCI tests to connect. [email protected] May 2007
#export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
#export PDO_OCI_TEST_USER=scott
#export PDO_OCI_TEST_PASS=%{oci8_test_system_password}
#AZ
if ! make test; then
set +x
for f in `find .. -name \*.diff -type f -print`; do
    echo "TEST FAILURE: $f --"
    cat "$f"
    echo "-- $f result ends."
done
set -x
#exit 1
fi
unset NO_INTERACTION REPORT_EXIT_STATUS MALLOC_CHECK_
%install
[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
# Install everything from the CGI SAPI build
pushd build-cgi
make install INSTALL_ROOT=$RPM_BUILD_ROOT
mv $RPM_BUILD_ROOT%{_bindir}/php $RPM_BUILD_ROOT%{_bindir}/php-cgi
# Install the CLI SAPI as /usr/bin/php
make install-cli INSTALL_ROOT=$RPM_BUILD_ROOT
popd
# Install the Apache module
pushd build-apache
make install-sapi INSTALL_ROOT=$RPM_BUILD_ROOT
popd
# Install the default configuration file and icons
install -m 755 -d $RPM_BUILD_ROOT%{_sysconfdir}/
install -m 644 $RPM_SOURCE_DIR/php.ini $RPM_BUILD_ROOT%{_sysconfdir}/php.ini
install -m 755 -d $RPM_BUILD_ROOT%{contentdir}/icons
install -m 644    *.gif $RPM_BUILD_ROOT%{contentdir}/icons/
# For PEAR packaging:
install -m 755 -d $RPM_BUILD_ROOT%{_libdir}/php/pear
# Use correct libdir
sed -i -e 's|%{_prefix}/lib|%{_libdir}|' $RPM_BUILD_ROOT%{_sysconfdir}/php.ini
# install the DSO
install -m 755 -d $RPM_BUILD_ROOT%{_libdir}/httpd/modules
install -m 755 build-apache/libs/libphp5.so $RPM_BUILD_ROOT%{_libdir}/httpd/modules
# Apache config fragment
install -m 755 -d $RPM_BUILD_ROOT/etc/httpd/conf.d
install -m 644 $RPM_SOURCE_DIR/php.conf $RPM_BUILD_ROOT/etc/httpd/conf.d
install -m 755 -d $RPM_BUILD_ROOT%{_sysconfdir}/php.d
install -m 755 -d $RPM_BUILD_ROOT%{_localstatedir}/lib/php
install -m 700 -d $RPM_BUILD_ROOT%{_localstatedir}/lib/php/session
# Generate files lists and stub .ini files for each subpackage
#AZ
for mod in oci8 pgsql mysql mysqli odbc ldap snmp xmlrpc imap \
    mbstring ncurses gd dom xsl soap bcmath dba xmlreader xmlwriter \
    pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite; do
#AZ
    cat > $RPM_BUILD_ROOT%{_sysconfdir}/php.d/${mod}.ini <<EOF
; Enable ${mod} extension module
extension=${mod}.so
EOF
    cat > files.${mod} <<EOF
%attr(755,root,root) %{_libdir}/php/modules/${mod}.so
%config(noreplace) %attr(644,root,root) %{_sysconfdir}/php.d/${mod}.ini
EOF
done
# The dom, xsl and xml* modules are all packaged in php-xml
cat files.dom files.xsl files.xml{reader,writer} > files.xml
# The mysql and mysqli modules are both packaged in php-mysql
cat files.mysqli >> files.mysql
# Split out the PDO modules
#AZ
cat files.pdo_oci >> files.oci8
#AZ
cat files.pdo_mysql >> files.mysql
cat files.pdo_pgsql >> files.pgsql
cat files.pdo_odbc >> files.odbc
# Package pdo_sqlite with pdo; isolating the sqlite dependency
# isn't useful at this time since rpm itself requires sqlite.
cat files.pdo_sqlite >> files.pdo
# Remove unpackaged files
rm -rf $RPM_BUILD_ROOT%{_libdir}/php/modules/*.a \
       $RPM_BUILD_ROOT%{_bindir}/{phptar} \
       $RPM_BUILD_ROOT%{_datadir}/pear
# Remove irrelevant docs
rm -f README.{Zeus,QNX,CVS-RULES}
%clean
[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
rm files.*
%files
%defattr(-,root,root)
%{_libdir}/httpd/modules/libphp5.so
%attr(0770,root,apache) %dir %{_localstatedir}/lib/php/session
%config %{_sysconfdir}/httpd/conf.d/php.conf
%{contentdir}/icons/php.gif
%files common
%defattr(-,root,root)
%doc CODING_STANDARDS CREDITS EXTENSIONS INSTALL LICENSE NEWS README*
%doc Zend/ZEND_* gd_README TSRM_LICENSE regex_COPYRIGHT
%config %{_sysconfdir}/php.ini
%dir %{_sysconfdir}/php.d
%dir %{_libdir}/php
%dir %{_libdir}/php/modules
%dir %{_localstatedir}/lib/php
%dir %{_libdir}/php/pear
%files cli
%defattr(-,root,root)
%{_bindir}/php
%{_bindir}/php-cgi
%{_mandir}/man1/php.1*
%files devel
%defattr(-,root,root)
%{_bindir}/php-config
%{_bindir}/phpize
%{_includedir}/php
%{_libdir}/php/build
%{_mandir}/man1/php-config.1*
%{_mandir}/man1/phpize.1*
%files pgsql -f files.pgsql
%files mysql -f files.mysql
%files odbc -f files.odbc
%files imap -f files.imap
%files ldap -f files.ldap
%files snmp -f files.snmp
%files xml -f files.xml
%files xmlrpc -f files.xmlrpc
%files mbstring -f files.mbstring
%files ncurses -f files.ncurses
%files gd -f files.gd
%files soap -f files.soap
%files bcmath -f files.bcmath
%files dba -f files.dba
%files pdo -f files.pdo
#AZ
%files oci8 -f files.oci8
#AZ
%changelog
* Wed Sep 12 2007 Joe Orton <[email protected]> 5.1.6-15.el5
- improve fix for CVE-2007-3997 (#278411)
* Fri Sep 7 2007 Joe Orton <[email protected]> 5.1.6-14.el5
- fix backport for CVE-2007-3996 (#278411)
* Thu Sep 6 2007 Joe Orton <[email protected]> 5.1.6-13.el5
- add security fixes for CVE-2007-2756, CVE-2007-2872,
CVE-2007-3799, CVE-2007-3996, CVE-2007-3998, CVE-2007-4658,
CVE-2007-4670 (#278411)
* Wed Apr 4 2007 Joe Orton <[email protected]> 5.1.6-12.el5
- add security fix for CVE-2007-1864, SOAP redirect handling issue,
FTP CRLF injection issue (#235016)
* Wed Apr 4 2007 Joe Orton <[email protected]> 5.1.6-11.el5
- add security fix for CVE-2007-1718 (#235016)
* Tue Apr 3 2007 Joe Orton <[email protected]> 5.1.6-9.el5
- add security fix for CVE-2007-1583 (#235016)
- add security fixes for CVE-2007-0455, CVE-2007-1001 (#235036)
* Fri Mar 9 2007 Joe Orton <[email protected]> 5.1.6-7.el5
- add security fix for CVE-2007-1285 (#231597)
* Fri Feb 16 2007 Joe Orton <[email protected]> 5.1.6-6.el5
- add security fixes for: CVE-2007-0906, CVE-2007-0907,
CVE-2007-0908, CVE-2007-0909, CVE-2007-0910, CVE-2007-0988 (#229013)
* Tue Dec 19 2006 Joe Orton <[email protected]> 5.1.6-5.el5
- fix version for php-zend-abi (#218758)
* Thu Nov 23 2006 Joe Orton <[email protected]> 5.1.6-4.el5
- php-xml provides php-domxml (#215656)
- fix php-pdo-abi provide (#214281)
- provide php-zend-abi (#212804)
- don't Obsolete mod_php
- fix PDO sqlite TEXT extraction truncate-by-one (#217033)
- package php{ize,-config} man pages in -devel (#199382)
- change module subpackages to require php-common not php (#177821)
- add security fix for CVE-2006-5465 (#216114)
* Wed Oct 4 2006 Joe Orton <[email protected]> 5.1.6-3
- from upstream: add safety checks against integer overflow in _ecalloc
* Tue Aug 29 2006 Joe Orton <[email protected]> 5.1.6-2
- update to 5.1.6 (security fixes)
- bump default memory_limit to 16M (#196802)
* Wed Jul 12 2006 Jesse Keating <[email protected]> - 5.1.4-8.1
- rebuild
* Fri Jun 9 2006 Joe Orton <[email protected]> 5.1.4-8
- Provide php-posix (#194583)
- only provide php-pcntl from -cli subpackage
- add missing defattr's (thanks to Matthias Saou)
* Fri Jun 9 2006 Joe Orton <[email protected]> 5.1.4-7
- move Obsoletes for php-openssl to -common (#194501)
- Provide: php-cgi from -cli subpackage
* Fri Jun 2 2006 Joe Orton <[email protected]> 5.1.4-6
- split out php-cli, php-common subpackages (#177821)
- add php-pdo-abi version export (#193202)
* Wed May 24 2006 Radek Vokal <[email protected]> 5.1.4-5.1
- rebuilt for new libnetsnmp
* Thu May 18 2006 Joe Orton <[email protected]> 5.1.4-5
- provide mod_php (#187891)
- provide php-cli (#192196)
- use correct LDAP fix (#181518)
- define GNUSOURCE in php_config.h and leave it defined
- drop (circular) dependency on php-pear
* Mon May 8 2006 Joe Orton <[email protected]> 5.1.4-3
- update to 5.1.4
* Wed May 3 2006 Joe Orton <[email protected]> 5.1.3-3
- update to 5.1.3
* Tue Feb 28 2006 Joe Orton <[email protected]> 5.1.2-5
- provide php-api (#183227)
- add provides for all builtin modules (Tim Jackson, #173804)
- own %%{_libdir}/php/pear for PEAR packages (per #176733)
- add obsoletes to allow upgrade from FE4 PDO packages (#181863)
* Fri Feb 10 2006 Jesse Keating <[email protected]> - 5.1.2-4.3
- bump again for double-long bug on ppc(64)
* Tue Feb 07 2006 Jesse Keating <[email protected]> - 5.1.2-4.1
- rebuilt for new gcc4.1 snapshot and glibc changes
* Tue Jan 31 2006 Joe Orton <[email protected]> 5.1.2-4
- rebuild for new libc-client soname
* Mon Jan 16 2006 Joe Orton <[email protected]> 5.1.2-3
- only build xmlreader and xmlwriter shared (#177810)
* Fri Jan 13 2006 Joe Orton <[email protected]> 5.1.2-2
- update to 5.1.2
* Thu Jan 5 2006 Joe Orton <[email protected]> 5.1.1-8
- rebuild again
* Mon Jan 2 2006 Joe Orton <[email protected]> 5.1.1-7
- rebuild for new net-snmp
* Mon Dec 12 2005 Joe Orton <[email protected]> 5.1.1-6
- enable short_open_tag in default php.ini again (#175381)
* Fri Dec 09 2005 Jesse Keating <[email protected]>
- rebuilt
* Thu Dec 8 2005 Joe Orton <[email protected]> 5.1.1-5
- require net-snmp for php-snmp (#174800)
* Sun Dec 4 2005 Joe Orton <[email protected]> 5.1.1-4
- add /usr/share/pear back to hard-coded include_path (#174885)
* Fri Dec 2 2005 Joe Orton <[email protected]> 5.1.1-3
- rebuild for httpd 2.2
* Mon Nov 28 2005 Joe Orton <[email protected]> 5.1.1-2
- update to 5.1.1
- remove pear subpackage
- enable pdo extensions (php-pdo subpackage)
- remove non-standard conditional module builds
- enable xmlreader extension
* Thu Nov 10 2005 Tomas Mraz <[email protected]> 5.0.5-6
- rebuilt against new openssl
* Mon Nov 7 2005 Joe Orton <[email protected]> 5.0.5-5
- pear: update to XML_RPC 1.4.4, XML_Parser 1.2.7, Mail 1.1.9 (#172528)
* Tue Nov 1 2005 Joe Orton <[email protected]> 5.0.5-4
- rebuild for new libnetsnmp
* Wed Sep 14 2005 Joe Orton <[email protected]> 5.0.5-3
- update to 5.0.5
- add fix for upstream #34435
- devel: require autoconf, automake (#159283)
- pear: update to HTTP-1.3.6, Mail-1.1.8, Net_SMTP-1.2.7, XML_RPC-1.4.1
- fix imagettftext et al (upstream, #161001)
* Thu Jun 16 2005 Joe Orton <[email protected]> 5.0.4-11
- ldap: restore ldap_start_tls() function
* Fri May 6 2005 Joe Orton <[email protected]> 5.0.4-10
- disable RPATHs in shared extensions (#156974)
* Tue May 3 2005 Joe Orton <[email protected]> 5.0.4-9
- build simplexml_import_dom even with shared dom (#156434)
- prevent truncation of copied files to ~2Mb (#155916)
- install /usr/bin/php from CLI build alongside CGI
- enable sysvmsg extension (#142988)
* Mon Apr 25 2005 Joe Orton <[email protected]> 5.0.4-8
- prevent build of builtin dba as well as shared extension
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-7
- split out dba and bcmath extensions into subpackages
- BuildRequire gcc-c++ to avoid AC_PROG_CXX{,CPP} failure (#155221)
- pear: update to DB-1.7.6
- enable FastCGI support in /usr/bin/php-cgi (#149596)
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-6
- build /usr/bin/php with the CLI SAPI, and add /usr/bin/php-cgi,
built with the CGI SAPI (thanks to Edward Rudd, #137704)
- add php(1) man page for CLI
- fix more test cases to use -n when invoking php
* Wed Apr 13 2005 Joe Orton <[email protected]> 5.0.4-5
- rebuild for new libpq soname
* Tue Apr 12 2005 Joe Orton <[email protected]> 5.0.4-4
- bundle from PEAR: HTTP, Mail, XML_Parser, Net_Socket, Net_SMTP
- snmp: disable MSHUTDOWN function to prevent error_log noise (#153988)
- mysqli: add fix for crash on x86_64 (Georg Richter, upstream #32282)
* Mon Apr 11 2005 Joe Orton <[email protected]> 5.0.4-3
- build shared objects as PIC (#154195)
* Mon Apr 4 2005 Joe Orton <[email protected]> 5.0.4-2
- fix PEAR installation and bundle PEAR DB-1.7.5 package
* Fri Apr 1 2005 Joe Orton <[email protected]> 5.0.4-1
- update to 5.0.4 (#153068)
- add .phps AddType to php.conf (#152973)
- better gcc4 fix for libxmlrpc
* Wed Mar 30 2005 Joe Orton <[email protected]> 5.0.3-5
- BuildRequire mysql-devel >= 4.1
- don't mark php.ini as noreplace to make upgrades work (#152171)
- fix subpackage descriptions (#152628)
- fix memset(,,0) in Zend (thanks to Dave Jones)
- fix various compiler warnings in Zend
* Thu Mar 24 2005 Joe Orton <[email protected]> 5.0.3-4
- package mysqli extension in php-mysql
- really enable pcntl (#142903)
- don't build with --enable-safe-mode (#148969)
- use "Instant Client" libraries for oci8 module (Kai Bolay, #149873)
* Fri Feb 18 2005 Joe Orton <[email protected]> 5.0.3-3
- fix build with GCC 4
* Wed Feb 9 2005 Joe Orton <[email protected]> 5.0.3-2
- install the ext/gd headers (#145891)
- enable pcntl extension in /usr/bin/php (#142903)
- add libmbfl array arithmetic fix ([email protected], #143795)
- add BuildRequire for recent pcre-devel (#147448)
* Wed Jan 12 2005 Joe Orton <[email protected]> 5.0.3-1
- update to 5.0.3 (thanks to Robert Scheck et al, #143101)
- enable xsl extension (#142174)
- package both the xsl and dom extensions in php-xml
- enable soap extension, shared (php-soap package) (#142901)
- add patches from upstream 5.0 branch:
* Zend_strtod.c compile fixes
* correct php_sprintf return value usage
* Mon Nov 22 2004 Joe Orton <[email protected]> 5.0.2-8
- update for db4-4.3 (Robert Scheck, #140167)
- build against mysql-devel
- run tests in %%check
* Wed Nov 10 2004 Joe Orton <[email protected]> 5.0.2-7
- truncate changelog at 4.3.1-1
- merge from 4.3.x package:
- enable mime_magic extension and Require: file (#130276)
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-6
- fix dom/sqlite enable/without confusion
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-5
- fix phpize installation for lib64 platforms
- add fix for segfault in variable parsing introduced in 5.0.2
* Mon Nov 8 2004 Joe Orton <[email protected]> 5.0.2-4
- update to 5.0.2 (#127980)
- build against mysqlclient10-devel
- use new RTLD_DEEPBIND to load extension modules
- drop explicit requirement for elfutils-devel
- use AddHandler in default conf.d/php.conf (#135664)
- "fix" round() fudging for recent gcc on x86
- disable sqlite pending audit of warnings and subpackage split
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-4
- don't build dom extension into 2.0 SAPI
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-3
- ExclusiveArch: x86 ppc x86_64 for the moment
* Fri Sep 17 2004 Joe Orton <[email protected]> 5.0.1-2
- fix default extension_dir and conf.d/php.conf
* Thu Sep 9 2004 Joe Orton <[email protected]> 5.0.1-1
- update to 5.0.1
- only build shared modules once
- put dom extension in php-dom subpackage again
- move extension modules into %%{_libdir}/php/modules
- don't use --with-regex=system, it's ignored for the apache* SAPIs
* Wed Aug 11 2004 Tom Callaway <[email protected]>
- Merge in some spec file changes from Jeff Stern ([email protected])
* Mon Aug 09 2004 Tom Callaway <[email protected]>
- bump to 5.0.0
- add patch to prevent clobbering struct re_registers from regex.h
- remove domxml references, replaced with dom now built-in
- fix php.ini to refer to php5 not php4
* Wed Aug 04 2004 Florian La Roche <[email protected]>
- rebuild
* Wed Jul 14 2004 Joe Orton <[email protected]> 4.3.8-3
- update to 4.3.8
- catch some fd > FD_SETSIZE vs select() issues (#125258)
* Mon Jun 21 2004 Joe Orton <[email protected]> 4.3.7-4
- pick up test failures again
- have -devel require php of same release
* Thu Jun 17 2004 Joe Orton <[email protected]> 4.3.7-3
- add gmp_powm fix (Oskari Saarenmaa, #124318)
- split mbstring, ncurses, gd, openssl extns into subpackages
- fix memory leak in apache2handler; use ap_r{write,flush}
rather than brigade interfaces
* Tue Jun 15 2004 Elliot Lee <[email protected]>
- rebuilt
* Thu Jun 3 2004 Joe Orton <[email protected]> 4.3.7-1
- update to 4.3.7
- have -pear subpackage require php of same VR
* Wed May 26 2004 Joe Orton <[email protected]> 4.3.6-6
- buildrequire smtpdaemon (#124430)
- try switching to system libgd again (prevent symbol conflicts
when e.g. mod_perl loads the system libgd library.)
* Wed May 19 2004 Joe Orton <[email protected]> 4.3.6-5
- don't obsolete php-imap (#123580)
- unconditionally build -imap subpackage
* Thu May 13 2004 Joe Orton <[email protected]> 4.3.6-4
- remove trigger
* Thu Apr 22 2004 Joe Orton <[email protected]> 4.3.6-3
- fix umask reset "feature" (#121454)
- don't use DL_GLOBAL when dlopen'ing extension modules
* Sun Apr 18 2004 Joe Orton <[email protected]> 4.3.6-2
- fix segfault on httpd SIGHUP (upstream #27810)
* Fri Apr 16 2004 Joe Orton <[email protected]> 4.3.6-1
- update to 4.3.6 (Robert Scheck, #121011)
* Wed Apr 7 2004 Joe Orton <[email protected]> 4.3.4-11
- add back imap subpackage, using libc-client (#115535)
* Tue Mar 02 2004 Elliot Lee <[email protected]>
- rebuilt
* Wed Feb 18 2004 Joe Orton <[email protected]> 4.3.4-10
- eliminate /usr/local/lib RPATH in odbc.so
- really use system pcre library
* Fri Feb 13 2004 Elliot Lee <[email protected]> 4.3.4-9
- rebuilt
* Mon Feb 2 2004 Bill Nottingham <[email protected]> 4.3.4-8
- obsolete php-imap if we're not building it
* Wed Jan 28 2004 Joe Orton <[email protected]> 4.3.4-7
- gd fix for build with recent Freetype2 (from upstream)
- remove easter egg (Oden Eriksson, Mandrake)
* Wed Jan 21 2004 Joe Orton <[email protected]> 4.3.4-6
- php-pear requires php
- also remove extension=imap from php.ini in upgrade trigger
- merge from Taroon: allow upgrade from Stronghold 4.0
* Wed Jan 21 2004 Joe Orton <[email protected]> 4.3.4-5
- add defattr for php-pear subpackage
- restore defaults: output_buffering=Off, register_argc_argv=On
- add trigger to handle php.ini upgrades smoothly (#112470)
* Tue Jan 13 2004 Joe Orton <[email protected]> 4.3.4-4
- conditionalize support for imap extension for the time being
- switch /etc/php.ini to use php.ini-recommended (but leave
variables_order as EGPCS) (#97765)
- set session.path to /var/lib/php/session by default (#89975)
- own /var/lib/php{,/session} and have apache own the latter
- split off php-pear subpackage (#83771)
* Sat Dec 13 2003 Jeff Johnson <[email protected]> 4.3.4-3
- rebuild against db-4.2.52.
* Mon Dec 1 2003 Joe Orton <[email protected]> 4.3.4-2
- rebuild for new libxslt (#110658)
- use --with-{mssql,oci8} for enabling extensions (#110482)
- fix rebuild issues (Jan Visser, #110274)
- remove hard-coded LIBS
- conditional support for mhash (Aleksander Adamowski, #111251)
* Mon Nov 10 2003 Joe Orton <[email protected]> 4.3.4-1.1
- rebuild for FC1 updates
* Mon Nov 10 2003 Joe Orton <[email protected]> 4.3.4-1
- update to 4.3.4
- include all licence files
- libxmlrpc fixes
* Mon Oct 20 2003 Joe Orton <[email protected]> 4.3.3-6
- use bundled libgd (#107407)
- remove manual: up-to-date manual sources are no longer DFSG-free;
it's too big; it's on the web anyway; #91292, #105804, #107384
* Wed Oct 15 2003 Joe Orton <[email protected]> 4.3.3-5
- add php-xmlrpc subpackage (#107138)
* Mon Oct 13 2003 Joe Orton <[email protected]> 4.3.3-4
- drop recode support, symbols collide with MySQL
* Sun Oct 12 2003 Joe Orton <[email protected]> 4.3.3-3
- split domxml extension into php-domxml subpackage
- enable xslt and xml support in domxml extension (#106042)
- fix httpd-devel build requirement (#104341)
- enable recode extension (#106755)
- add workaround for #103982
* Thu Sep 25 2003 Jeff Johnson <[email protected]> 4.3.3-3
- rebuild against db-4.2.42.
* Sun Sep 7 2003 Joe Orton <[email protected]> 4.3.3-2
- don't use --enable-versioning, it depends on libtool being
broken (#103690)
* Sun Sep 7 2003 Joe Orton <[email protected]> 4.3.3-1
- update to 4.3.3
- add libtool build prereq (#103388)
- switch to apache2handler
* Mon Jul 28 2003 Joe Orton <[email protected]> 4.3.2-8
- rebuild
* Tue Jul 22 2003 Nalin Dahyabhai <[email protected]> 4.3.2-7
- rebuild
* Tue Jul 8 2003 Joe Orton <[email protected]> 4.3.2-6
- use system pcre library
* Mon Jun 9 2003 Joe Orton <[email protected]> 4.3.2-5
- enable mbstring and mbregex (#81336)
- fix use of libtool 1.5
* Wed Jun 04 2003 Elliot Lee <[email protected]>
- rebuilt
* Tue Jun 3 2003 Joe Orton <[email protected]> 4.3.2-3
- add lib64 and domxml fixes
* Tue Jun 3 2003 Frank Dauer <[email protected]>
- added conditional support for mssql module (#92149)
* Fri May 30 2003 Joe Orton <[email protected]> 4.3.2-2
- update the -tests and -lib64 patches
- fixes for db4 detection
- require aspell-devel >= 0.50.0 for pspell compatibility
* Thu May 29 2003 Joe Orton <[email protected]> 4.3.2-1
- update to 4.3.2
* Fri May 16 2003 Joe Orton <[email protected]> 4.3.1-3
- link odbc module correctly
- patch so that php -n doesn't scan inidir
- run tests using php -n, avoid loading system modules
* Wed May 14 2003 Joe Orton <[email protected]> 4.3.1-2
- workaround broken parser produced by bison-1.875
* Tue May 6 2003 Joe Orton <[email protected]> 4.3.1-1
- update to 4.3.1; run test suite
- open extension modules with RTLD_NOW rather than _LAZYThe error is :
Build complete.
(It is safe to ignore warnings about tempnam and tmpnam).
+ with-oci8 enable-sigchild
/var/tmp/rpm-tmp.3167: line 156: --with-oci8: command not found
error: Bad exit status from /var/tmp/rpm-tmp.3167 (%build)
RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.3167 (%build)If i modify spec like this :
# Build /usr/bin/php-cgi with the CGI SAPI, and all the shared extensions
pushd build-cgi
build --enable-force-cgi-redirect \
      --enable-pcntl \
      with-imap=shared with-imap-ssl \
      enable-mbstring=shared enable-mbstr-enc-trans \
      --enable-mbregex \
      --with-ncurses=shared \
      --with-gd=shared \
      --enable-bcmath=shared \
      enable-dba=shared with-db4=%{_prefix} \
      --with-xmlrpc=shared \
      --with-ldap=shared \
      --with-mysql=shared,%{_prefix} \
      --with-mysqli=shared,%{_bindir}/mysql_config \
      --enable-dom=shared \
      --with-dom-xslt=%{_prefix} --with-dom-exslt=%{_prefix} \
      --with-pgsql=shared \
      --with-snmp=shared,%{_prefix} \
      --enable-soap=shared \
      --with-xsl=shared,%{_prefix} \
      enable-xmlreader=shared enable-xmlwriter=shared \
      --enable-fastcgi \
      --enable-pdo=shared \
      --with-pdo-odbc=shared,unixODBC,%{_prefix} \
      --with-pdo-mysql=shared,%{_prefix} \
      --with-pdo-pgsql=shared,%{_prefix} \
      --with-pdo-sqlite=shared,%{_prefix} \
#      --with-pdo-oci=shared,$ORACLE_HOME \
      --with-oci8=shared,$ORACLE_HOME/lib \
       --enable-sigchild
popdI'm getting :
Build complete.
(It is safe to ignore warnings about tempnam and tmpnam).
+ with-oci8=shared,/u01/app/oracle/product/10.2.0/db_1/lib enable-sigchild
/var/tmp/rpm-tmp.11885: line 156: --with-oci8=shared,/u01/app/oracle/product/10.2.0/db_1/lib: No such file or directory
error: Bad exit status from /var/tmp/rpm-tmp.11885 (%build)
Please help.

and a bit further :
diff:
12,13c12,13
< %define oci8_test_system_password tiger
< %define oci8_test_connection_string localhost/lhome
%define oci8_test_system_password oracle
%define oci8_test_connection_string localhost/orcl2136,138c136,137
< Requires: php-common = %{version}-%{release}, php-pdo
< # oracle-instantclient-basic = %{ociver} php-pdo
< #BuildRequires: oracle-instantclient-devel = %{ociver}
Requires: php-common = %{version}-%{release}, oracle-instantclient-basic = %{ociver} php-pdo
BuildRequires: oracle-instantclient-devel = %{ociver}339c338
< \$user       = "scott";
\$user = "system";487c486,487
<       with-oci8 enable-sigchild
--with-pdo-oci=shared,instantclient,/usr,%{ociver} \
--with-oci8=shared,instantclient,/usr/lib/oracle/%{ociver}/client/lib --enable-sigchild496c496
<       disable-pdo disable-xmlreader --disable-xmlwriter
disable-pdo disable-xmlreader --disable-xmlwriter506,508c506,508
< #export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
< #export PDO_OCI_TEST_USER=system
< #export PDO_OCI_TEST_PASS=%{oci8_test_system_password}
export PDO_OCI_TEST_DSN=oci:dbname=%{oci8_test_connection_string}
export PDO_OCI_TEST_USER=system
export PDO_OCI_TEST_PASS=%{oci8_test_system_password}571c571
<     pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite; do
pdo pdo_mysql pdo_pgsql pdo_odbc pdo_sqlite pdo_oci; do589c589
< #cat files.pdo_oci >> files.oci8
cat files.pdo_oci >> files.oci8rpmbuild -bi
+ '[' /var/tmp/php-root '!=' / ']'
+ rm -f /var/tmp/php-root/etc/httpd/conf/httpd.conf /var/tmp/php-root/etc/httpd/conf/httpd.conf.bak
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip
+ /usr/lib/rpm/brp-strip-static-archive
+ /usr/lib/rpm/brp-strip-comment-note
Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.40673
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd php-5.2.3
+ cd build-apache
+ export NO_INTERACTION=1 REPORT_EXIT_STATUS=1 MALLOC_CHECK_=2
+ NO_INTERACTION=1
+ REPORT_EXIT_STATUS=1
+ MALLOC_CHECK_=2
+ unset TZ LANG LC_ALL
+ make test
Build complete.
Don't forget to run 'make test'.
PHP Warning: PHP Startup: gd: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: ldap: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: gd: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: ldap: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0etc. etc...

Error while installing Oracle 10g on CentOS 5.5

Hello,
I have been using the following url to install oracle 10g R2:
http://onaxer.com/blog/blog/tag/oracle-10g-r2-installtion-on-centos-5-5rhel/
I have copied the oracle 10g R2 linux version from windows to linux using FTP.
All the installer requirements have been met, but i'm getting the following error while running the installation:
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-21_03-11-44PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-02-21_03-11-44PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Any help would be greatly appreciated.
Thanks.

Hi,
Download & Install the following rpm and retry oracle installation.
http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
installation
rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6.
As root, issue the commands:
mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Pubudu

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Oracle 11g RAC on CentOS 5.2 - Node isnt working after hardware failure

Hi,
We have a 2-node Oracle RAC 11g running on identical nodes with Centos 5.2 as operating system.
Due to a drive failure and a reboot yesterday, the ASM disk, which is onnected via iSCSI, changed from sdd to sdc in name - (the faulty raid drive was removed, thus the change).
The oracle services didnt start, which appeard perfectly logical at the time, given that the ASM disk suddenly wasnt where it was supposed to be, but even today after a replacement disk was inserted, the RAID rebuilt + with the ASM disk back to its original naming in /dev/; the node doesnt seem to work properly. Some of the oracle services are running, but there seems to be a problem with the listener, which might also explain why the node does not set it's virtual ip after starting up.
Luckily, the other one is unaffected and is working perfectly fine..
I'm far from having a clue about oracle, it was sheer luck (that, and the very usable documentation by oracle) that i managed to get that cluster running in the first place... I know my way around linux, so if it's a operating system related problem i'll be able to fix it, but i cant figure out what the problem with oracle is.
The listener doesnt seem to be running
[oracle@serv-211 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 08-JUN-2010 11:12:00
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Manual starting works, but not with the result i hoped for
[root@serv-211 oracle]# lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 08-JUN-2010 11:32:16
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 08-JUN-2010 11:30:42
Uptime 0 days 0 hr. 1 min. 34 sec
Trace Level support
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /opt/oracle/11g/diag/tnslsnr/serv-211/listener/alert/log.xml
Listener Trace File /opt/oracle/11g/diag/tnslsnr/serv-211/listener/trace/ora_22694_140227439994592.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=serv-211)(PORT=1521)))
The listener supports no services
The command completed successfully
[root@serv-211 oracle]#
While other services appear to be fine
[oracle@serv-211 ~]$ crsctl check crs
Cluster Synchronization Services appears healthy
Cluster Ready Services appears healthy
Event Manager appears healthy
I feel a little lost in the vast amount of logfiles, a point in the right direction might actually be enough. I cant image it can be that serious.
Please assist
Regards
Edited by: user9134821 on 08.06.2010 02:39

Hi,
As usual, as soon as i post a problem in some board, i find the solution myself.
Although this way isnt really "linuxy", deleting the listener with the netCA tool and adding a new one solved it.
Regards.

Installing Oracle Database 11.2.0.3 on Centos 6.4 in AWS

We have been installing and configuring oracle database 11.2.0.3 with OIAM 11gR1 for a few years with great success.
RHEL 5.7
WLS 10.3.6
OracleDB 11.2.0.3
OIAM 11gR1
OHS 11.1.1.6
We have recently decided to move our VMs to Amazon's EC2 environment using CentOS 6.4. The OS our client currently has us using is a hardened version of RHEL5.7. We have installed on CentOS in the past but not in 6.4. All the prereqs are setup but we cannot seem to get the database to configure completely. Running in silent or interactive mode makes no difference.
When running in silent mode we received the following:
./runInstaller -silent -ignoreSysPreReqs -responseFile db_install_w_database.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB.   Actual 6463 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 24999 MB    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-13_04-55-50PM. Please wait ...
You can find the log of this install session at:
/opt/oraInventory/logs/installActions2015-04-13_04-55-50PM.log
The installation of Oracle Database 11g was successful.
Please check '/opt/oraInventory/logs/silentInstall2015-04-13_04-55-50PM.log' for more details.
[WARNING] [INS-32091] Some of the configuration assistants failed.
   CAUSE: Software installation was successful. But some configuration assistants failed, were cancelled or skipped.
   ACTION: Refer to the logs or contact Oracle Support Services.
Checking the install log:
INFO: Oracle Net Listener Startup:
INFO: The information provided for this listener is currently in use by other software on this computer.
INFO:     Listener start failed.
INFO: Check the trace file for details: /opt/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1504134PM5854.log
INFO: Oracle Net Services configuration failed. The exit code is 1
Then checking the netca log
[main] [ 2015-04-13 16:58:55.132 UTC ] [CmdToolUtil.doexecute:473] nativeSystem.runRemoteExecCmd failed. Command = /opt/oracle/product/dbs/srvm/admin/getcrshome arguments = [] env = null error = null
[main] [ 2015-04-13 16:58:55.133 UTC ] [HAUtils.getHASHome:938] Failed to get HAS home.
PRCT-1011 : Failed to run "getcrshome". Detailed error: null
oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:483)
oracle.sysman.assistants.util.hasi.HAUtils.getConfiguredGridHome(HAUtils.java:782)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:934)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:955)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:529)
oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1516)
oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1538)
oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1785)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:183)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4189)
oracle.net.ca.NetCA.main(NetCA.java:428)
[main] [ 2015-04-13 16:58:55.133 UTC ] [HAUtils.isHASConfigured:532] HA Home is null
[main] [ 2015-04-13 16:58:55.134 UTC ] [ConfigureListener.isHASConfigured:1524] Is Oracle Restart configured: false
[main] [ 2015-04-13 16:58:55.134 UTC ] [ConfigureListener.isHASRunning:1553] Is Oracle Restart running: false
[main] [ 2015-04-13 16:58:55.134 UTC ] [ConfigureListener.listenerExists:344] Is listener "LISTENER" already exists: false
[main] [ 2015-04-13 16:58:55.135 UTC ] [ConfigureListener.typicalConfigure:215] Checking for free port in range: 1521-1540
[main] [ 2015-04-13 16:58:55.135 UTC ] [ConfigureListener.isPortFree:1080] Checking if port 1521 is free on local machine...
[main] [ 2015-04-13 16:58:55.135 UTC ] [ConfigureListener.isPortFree:1095] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2015-04-13 16:58:55.136 UTC ] [ConfigureListener.isPortFree:1097] Local host IP address: awscentoschrome.amazonaws.com/52.4.205.244
[main] [ 2015-04-13 16:58:55.136 UTC ] [ConfigureListener.isPortFree:1099] Local host name: awscentoschrome.amazonaws.com
[main] [ 2015-04-13 16:58:55.136 UTC ] [ConfigureListener.isPortFree:1115] IP Address: awscentoschrome.amazonaws.com/52.4.205.244, Is IPv6 Address: false
[main] [ 2015-04-13 16:58:55.137 UTC ] [ConfigureListener.isPortFree:1118] IP Address: awscentoschrome.amazonaws.com/52.4.205.244, Is Link-Local Address: false
[main] [ 2015-04-13 16:58:55.137 UTC ] [ConfigureListener.isPortFree:1143] Creating ServerSocket on Port:1521, IP Address: awscentoschrome.amazonaws.com/52.4.205.244
[main] [ 2015-04-13 16:58:55.140 UTC ] [ConfigureListener.isPortFree:1178] java.net.PlainSocketImpl.socketBind(Native Method)
java.net.PlainSocketImpl.bind(PlainSocketImpl.java:377)
java.net.ServerSocket.bind(ServerSocket.java:319)
java.net.ServerSocket.<init>(ServerSocket.java:185)
oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1145)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:219)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4189)
oracle.net.ca.NetCA.main(NetCA.java:428)
[main] [ 2015-04-13 16:58:55.140 UTC ] [ConfigureListener.isPortFree:1191] Returning is Port 1521 free: false
2 things come to mind with the netca log:
1) We are NOT using HA... so it would seem we could ignore that.
2) Port 1521 is NOT in use. I ran netstat -anpl | grep 1521 in a 5 second delay loop while running the installation and it never appeared.
Does anyone know if there is something different with Centos6.4 or AWS installations that would cause this? Also, the log says that the installation went fine and the issues were with configuration. The spfile does not exist and when root.sh is run after the install, the oratab has no entry ($ORACLE_SID:$ORACLE_HOME:<N|Y> does not exist).
Ideas?

Found the issue in the http://stackoverflow.com forums. We had searched them before but did not search on the correct error. I searched on "The information provided for this listener is currently in use by other software on this computer." and found a forum thread that we explained our issue.
We are using AWS as our server provider. AWS has 2 IPs it uses. The Public one which we use to putty into and access the server and the Private one that is on eth0. Evidently, the private IP needs to be in the /etc/hosts file not the public IP.
The database installed and is running.

.oui error in the install of oracle database client in a linux CentOS

I am installing oracle database client in eqipo linux CentOS, after making all the passages for the creation of the user oracle and its groups beginning the ./runInstaller application and appears to me the following error:
./runInstaller: line 66: /install/.oiu: cannot excecute binary file
as I can solve this
they can notify me the possible solution to the following e-mail?
[email protected] or
[email protected]

You may want to check these references for CentOS install:
Installing 10g Release 2 on Centos 4.3 & 4.4
http://www.dizwell.com/prod/node/50
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Oracle® Database Installation Guide
10g Release 2 (10.2) for Linux x86
Part Number B15660-02
Installing Oracle 10.2.0.1 on CentOS 5.0 (x86_64)
http://bderzhavets.blogspot.com/2007/04/installing-oracle-10.html
Installing 9i (9.2.0.1) Database on Centos 4.5
Installing 9i (9.2.0.1) Database on Centos 4.5
installing 10.2.0 on CentOS
Re: Got "java.lang.NullPointerException" installing 10.2.0 on CentOS
Link error installing 10gR2 on CentOS 4.4
Link error installing 10gR2 on CentOS 4.4
Re: 10g in vmware Centos
10g in vmware Centos
~ Madrid.

Oracle 11 on CentOS 5.1

Similar Messages

Maybe you are looking for