Oracle 8i on Linux
When trying to install on Caldera Linux v2.4 Oracle 8i runInstaller gives an error -
...jre...initializing
createProcess...-1
and exits.
Anu suggestions ? Would be grateful
The download for Oracle 8.1.7 for Linux is available at: http://otn.oracle.com/software/products/oracle8i/content.html
Documentation for this product can be found at:http://otn.oracle.com/docs/products/oracle8i/content.html
Best Regards, OTN Team
Similar Messages
-
How can i install oracle 10g on linux cluster
Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node. -
Oui-10207error while installing oracle 10g on linux in vmware
Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
VirajWhat is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/ -
Imp dmp file in oracle 10g on linux
i have oracle 10g on linux now i want to imp the dmp file to db.
i put the file in /mnt/erp/file.dmp folder.
i log in as oracle user and ....
and start the imp the file as
imp user/password file=/mnt/erp/file.dmp
but it giver error faile to open the file for read.....
what is the problem.....
is there any privillage issue???????????
helped with full syntax...and steps...i copy the dmp file in /mnt/erp folder as root user.
i am going to imp it as oracle user.
sir i don't know about dmp group.
i past the error i got..
[oracle@lnxdb erp]$ imp
Import: Release 10.2.0.1.0 - Production on Wed Oct 10 08:09:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: FS_10oct2012
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 -
Production
With the Partitioning, OLAP and Data Mining options
Import file: expdat.dmp > FR_10_10_2012.dmp
IMP-00002: failed to open FR_10_10_2012.dmp for read -
Creation of two databases in oracle 11g on linux
HI,
I need to create two databases in oracle 11g on linux.
how to set SID'S in .bash_profile and change the init.ora file.
pls anyone let me know
thanks
srinivasIf you have different databases on same node you could choose to not set ORACLE_SID in shell init file but use instead interactive oraenv Oracle script to set the right ORACLE_SID.
Please read Configuring the Operating System Environment Variables in http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/em_manage.htm#ADMQS12369
To create easily a database (ie without using your own scripts) try to use DBCA that will automatically take care of database initialization file: http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/install.htm#BABEIAID
Edited by: P. Forstmann on 5 août 2011 12:01 -
How to install oracle 10g on linux 9.0
am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.
Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/ -
Can't install Oracle 8 in Linux 6
I can't install Oracle 8 in Linux 6 because I encounted the
following error during installation:
Error during action 'Running startorcl.sql'.
Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
@/u01/app/oracle/admin/orcl/create/startorcl.sql
exit
What should I do ? Please help me.
nullBjarne (guest) wrote:
: Jameshow (guest) wrote:
: : I can't install Oracle 8 in Linux 6 because I encounted the
: : following error during installation:
: : Error during action 'Running startorcl.sql'.
: : Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
: : @/u01/app/oracle/admin/orcl/create/startorcl.sql
: : exit
: : What should I do ? Please help me.
: I got the same error message, and I still haven't figured out
: what to do. If there are anyone who can help, I think we both
: would appreciate it. Please help us both.
Hi there!
The first thing you should do if you get ANY (almost) error when
installing Oracle Server in RedHat Linux v6,0 is to read this
document carefully: http://jordan.fortwayne.com/oracle/
After hours of struggle it finally worked for me :-)))))
Only two things to add here:
1) If you want to be able to connect to the Linux server
(telnet) and running utilities like sqlplus locally on the
server, you should copy the ".profile" file to the users home
directory, add the user to the group "dba" AND make sure that
the $ORACLE_HOME directory has execute permissions for members
of the "dba" group (mine had default ONLY permission for the
owner to execute).
2) The file "listener.ora" was (for some reason) written
with "oracle_sid" where it really should say the real SID name
that is in my case "ORCL".
I just can't thank the guy who wrote the step-by-step
Installation guide for Oracle on RedHat Linux enough... THANK
YOU!
null -
Oracle 9i on LINUX Transparent Gateway for SQL Server
Does anybody know if there is a Transparent Gateway available for Oracle 9i on LINUX to connect to SQL Server? I have run the installer and cannot seem to find the install options for any Transparent Gateways. I am familiar with their location in the universal installer as I have installed the Oracle/SQL Server Transparent Gateway with Oracle in WinNT. Perhaps Transparent Gateways for Oracle/LINUX are not available?
Thanks in advance.I have the same issue - we want to upgrade our 9.2 to 10g Linux, and need to maintain connectivity to some legacy sqlserver databases. I can't find any mention of tg4msql for linux. What gives? Anyone know the answer to this? thanks, michael
-
Cannot install oracle 9i on linux (fedora core 2)
dear all members.
I cannot install oracle 9i on linux (fedora core 2)
progress bar stop at 17% no activity at hardisk. I wait for 15 hours , still no movement. file being copy is " naeet.o " , I am not sure how importance is it.
I try several times, but still similar result....
Amnuay U.
[email protected]Hi,
I think that Feedbak forum is not the best place for this problem.
You should ask this into
=> Installation Forum : Database Installation
or
=> Linux Forum : Generic Linux
Anyway, you can find an install doc here :
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
Nicolas. -
I want to install oracle 10g on linux.
i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx
I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before -
Auto start Oracle instance in linux
Can I configure oracle to auto start an oracle instance in linux environment ?
Here are the steps to enable the oracle service start automatically during the system boot
Login as root in Linux box to execute the following steps
1. the flag set to Y in /etc/oratab file with the respective instance
2. Copy the oracle script in /etc/init.d folder
3. change the permission < chmod 755 <script filename>
4. add the service <chkconfig --add <script filename>
5 Put the service auto on <chkconfig <script filename> on >
6. To verify the oracle service startup automatic < service <script filename> stop > < service <script filename> start >
Regards
N Jandial -
Oracle on alternative Linux platforms
Does anyone knows whether Oracle will support Linux on
alternative hardware platforms (like PowerPC or Alpha) or not?
If not do you know a database with Outer-Joins (Postgresql has
not) and subqueries (Mysql has not) support for Linux/PowerPC?
Thanks in advance.
Dieter Fiebelkor
nullDieter Fiebelkorn (guest) wrote:
: Does anyone knows whether Oracle will support Linux on
: alternative hardware platforms (like PowerPC or Alpha) or not?
: If not do you know a database with Outer-Joins (Postgresql has
: not) and subqueries (Mysql has not) support for Linux/PowerPC?
: Thanks in advance.
: Dieter Fiebelkor
I had the same question (Oracle on Alpha )
and asked altavista ;+)
The answer is yes, but only shipped for x86.
I think, we ( the customers ) have to ask Oracle
for their products on different hardware plattforms...
Pleas read this:
http://www.idg.net/crd_linuxworld_9-125976.html.
Maybe, DB2 runs on PowerPC, because IBM sponsors the
Linux development on their plattforms.
regards Norbert
null -
Does Oracle 8i for Linux include Oracle Enterprise Manager?
What's the version of the current Oracle 8i for Linux?
Enterprise Edition?
nullHi,
Michael (guest) wrote:
: The latest OEM is in Java. It is included in o8i for Solaris,
: which I use for an o8i machine at work. They don't seem to
: include it with the Linux version, though, despite the fact
that
: it's Java and theoretically (the key word here...) it should be
: platform-independent and run on Linux just the same.
NO, it will not work. You cannot even install since the installer
for Solaris is a Solaris binary and some windows exe also does
not work. I guess somebody has to write a better bootstrap proggy
first...
I wonder why they did it that way...
Marcus
: Bryan Batchelder (guest) wrote:
: : Oracle8i for Linux is Oracle 8.1.5.0 Enterprise Edition.
: : As for Oracle Enterprise Manager, they still only have that
for
: : NT, but you can download it from OTN.
: : --Bryan
: : Gary Young (guest) wrote:
: : : What's the version of the current Oracle 8i for Linux?
: : : Enterprise Edition?
null -
Starting Oracle-Xe on Linux fedora core 5
Dear fourm members,
I had Installed Oracle Xe on linux fedora core 5 and configure it.
When i try to start the oracle Xe server I get the follwing error.
# /etc/init.d/oracle-xe start
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
what can i do to start the service.Failed To Start Oracle Net Listener
-
Two oracle homes in linux!
Hello !
Can we make two oracle homes in Linux .
In one home i have to install 8i database and in the other home i have to install 9iAS.
What i think is , for two oracle homes in linux u need to make two oracle users first ,and in two different bash_profile file u have to give the path of oracle home. So this thing will not allow to start
your database every time. u have to change user every time and then start your database .
This thing will create problem .
I have tried this thing on NT and it worked . I mean i made two oracle Homes and on one home i installed 8i and on other home i installed 9iAS. and it worked uccessfully.
How can i do it on Linux .
Regards
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by seemab:
Sir i am talking about Red Hat Linux.
Can we do it on it .
Regards<HR></BLOCKQUOTE>
I don't see why not. I used to use Red Hat and it worked the same.
Say you want to start the database, open a terminal and do something like
su - oracle
<give password>
. setupdbenv
small script you write to set your SID, ORACLE_HOME, etc
then start the database in that terminal.
Similarly, for Oracle9iAS, log on using the correct user (root?), set the environment using something like . setupiasenv, and do the apachectl thing.
I have 5 different Java environments I can setup in this way. Would be impossible if I used .bashrc or .profile to setup my environments.
Cheers,
Malte
null -
Loading data by sql loader in oracle 10g on linux
I am trying to load data in Oracle 10g on linux by using sql loader, but getting error
Problem in log showing that field length of SURNAME field is more than table field size.
Following is the error in log file of sql loader
Record 21: Rejected - Error on table TABLE1, column
SURNAME.
ORA-12899: value too large for column SURNAME (actual: 65, maximum: 64)
and it is evident from following controlfile that i am using trim to discard any space then why it is giving an error.
LOAD DATA
TRUNCATE
INTO TABLE TABLE1
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
ID INTEGER EXTERNAL,
OPTION1 CHAR,
REF1 CHAR,
OTHER_REF CHAR,
TITLE "TRIM(:TITLE)",
FORENAME "TRIM(:FORENAME)",
SURNAME "TRIM(:SURNAME)",
JOINT_TITLE "TRIM(:JOINT_TITLE)",
JOINT_FORENAME "TRIM(:JOINT_FORENAME)",
JOINT_SURNAME "TRIM(:JOINT_SURNAME)",
I checked the bad file and count number of characters, they are 64 characters.
When i am inserting individual record from bad file by sql loader, it is loadingProbably your database character set is multi-byte. That is %UTF8 or AL16UTF16%
Post your NLS Database Parameters value
select * from nls_database_parameters;
In General varchar2(65) by default means 65 BYTES unless
you have changed your Defalut NLS_LENGTH_SEMANTICS parameter from BYTE to CHAR.
With best regards
Shan
Maybe you are looking for
-
Time Capsule Contents, Insufficient Privileges?
Longtime reader, first-time poster so forgive me if I stray from typical conventions.. I recently setup a 1TB (Dual-band) Time Capsule as both the target of my Time Machine backups and my home network's base station. Anywhere from 4-6 devices (at lea
-
Itunes colors on screen all screwed up
i recently upgraded to the new itunes 8.0 or something and now the colors in the itunes window is all screwed up, like pink and green. it goes away if i click on it but if i click again it comes back. i tried reinstalling but it didnt work...help?
-
Does photo size reduction for e-mailing degrade photos?
In using iPhoto to send photos by e-mail one has the option of reducing the size of these photos from actual size to small, medium, or large size in order to transmit them more quickly, but what effect does this size reduction have on the quality of
-
Cross catalog search doesn't work for CCM 2.0
Hi SRM gurus, We are using SRM 5.0 and CCM2.0. We created several CCM catalogs but cross catalog search doesn't work at all. In the call structure, option "cross catalog" is correctly customized. Are there additional check I have to do in order to se
-
Download all songs onto macbook from iTunes match cloud.
I just bought a macbook pro, i would like to download all my music from itunes match onto my macbook but don't want to manually select the cloud for each song. Is there an easier way to download them all?