Oracle Bi Components installation on different machines

Hi Gurus,
Consider we have presentation server installed in a machine(machine_1) and oracle bi server installed in another machine(machine_2). So for machine_1 to communicate with machine_2 i.e., the presentation server to communicate with bi server what configuration steps should be done like where do we mention that the bi server is located in a particular machine.
Thanks in Advance !

Consider we have presentation server installed in a machine(machine_1) and oracle bi server installed in another machine(machine_2). So for machine_1 to communicate with machine_2 i.e., the presentation server to communicate with bi server what configuration steps should be done like where do we mention that the bi server is located in a particular machine.Well....machine_1 holds the instanceconfig.xml file ..which has first tag as DSN -- AnalyticsWeb,
now the AnalyticsWeb DSN of ODBC.ini file consists of ServerMachine=machine_2
This is how BI Presentation Server recognizes the BI server

Similar Messages

Oracle Common Components Installation Failed.

Hi
We have installed Essbase Sever on Linux Server (Red Hat Enterprise Linux Server release 6.3) and other Hyperion Products on Windows Server.(V 11.1.2.2)
Installation and Configuration on Windows Sever were Successful and On Linux Server, the Commoncomponents Installation is failed.
Please Find the Logs:
2013-10-26T15:57:59.827+04:00] [EPMINS] [NOTIFICATION] [EPMINS-00001] [oracle.EPMINS.summary] [tid: 27] [SRC_CLASS: com.hyperion.install.util.InstallSummaryUtil] [arg: \n\n[System info]\nTools Level: Drop38...11.1.2.2.0.7418\nBuild version: 11.1.2.2.0.7790\nLocalhost: advltpde01.adweag.local\nSystem info: LINUX amd64\nCurrent Locale: en_US\nHYPERION_HOME: /apps/Oracle/EPMSystem11R1\nOracle inventory location: /home/Hypadmin/oraInventory\nInstallation type: INSTALL\nInstallation mode: ADVANCED\n\n[Pre-install checks]\nPass EPMINS-01024: EPM System Installer successfully resolved the hostname - advltpde01.adweag.local\nPass EPMINS-01026: The operating system is supported - Linux\nPass EPMINS-01063: All environment variables prerequisites have been met.\nPass EPMINS-01074: Inventory is writable\nCompletion status for ocm is Fail\n\n[Install status]\n( Oct 26, 2013 03.52.23 PM ) Pass [000 min 00 sec].Init Tool \n( Oct 26, 2013 03.53.35 PM ) Pass [001 min 12 sec].GUI Wizard \n( Oct 26, 2013 03.55.12 PM ) Pass [001 min 10 sec].WebLogic Application Server - webLogicCommonComponent \n( Oct 26, 2013 03.56.04 PM ) Pass [000 min 50 sec].Oracle Common Files - oracle_common \n( Oct 26, 2013 03.56.28 PM ) Pass [000 min 24 sec].Static Content Files - staticContent \n( Oct 26, 2013 03.56.30 PM ) Pass [000 min 02 sec].Common Components - tools \n( Oct 26, 2013 03.56.36 PM ) Pass [000 min 03 sec].Essbase Product Common Components - essbaseProductCommonComponents \n( Oct 26, 2013 03.56.38 PM ) Pass [000 min 00 sec].Common Components - productCommonComponents \n( Oct 26, 2013 03.57.06 PM ) Pass [000 min 24 sec].Common Components - commonComponents \n( Oct 26, 2013 03.57.08 PM ) Fail [ Unknown ].Common Components - ocm \n( Oct 26, 2013 03.57.40 PM ) Pass [000 min 32 sec].OPMN - opmn \n( Oct 26, 2013 03.57.52 PM ) Pass [000 min 11 sec].Essbase Server - essbase_services \n( Oct 26, 2013 03.57.56 PM ) Pass [000 min 04 sec].OUI \n( Oct 26, 2013 03.57.59 PM ) Fail [005 min 38 sec].Total \nFail ocm assembly was not saved in SoftwareRegistry.\nFail commonComponents assembly was not saved in SoftwareRegistry.\n] trace: [[
[System info]
Tools Level: Drop38...11.1.2.2.0.7418
Build version: 11.1.2.2.0.7790
Localhost: advltpde01.adweag.local
System info: LINUX amd64
Current Locale: en_US
HYPERION_HOME: /apps/Oracle/EPMSystem11R1
Oracle inventory location: /home/Hypadmin/oraInventory
Installation type: INSTALL
Installation mode: ADVANCED
[Pre-install checks]
Pass EPMINS-01024: EPM System Installer successfully resolved the hostname - advltpde01.adweag.local
Pass EPMINS-01026: The operating system is supported - Linux
Pass EPMINS-01063: All environment variables prerequisites have been met.
Pass EPMINS-01074: Inventory is writable
Completion status for ocm is Fail
[Install status]
( Oct 26, 2013 03.52.23 PM ) Pass [000 min 00 sec] Init Tool
( Oct 26, 2013 03.53.35 PM ) Pass [001 min 12 sec] GUI Wizard
( Oct 26, 2013 03.55.12 PM ) Pass [001 min 10 sec] WebLogic Application Server - webLogicCommonComponent
( Oct 26, 2013 03.56.04 PM ) Pass [000 min 50 sec] Oracle Common Files - oracle_common
( Oct 26, 2013 03.56.28 PM ) Pass [000 min 24 sec] Static Content Files - staticContent
( Oct 26, 2013 03.56.30 PM ) Pass [000 min 02 sec] Common Components - tools
( Oct 26, 2013 03.56.36 PM ) Pass [000 min 03 sec] Essbase Product Common Components - essbaseProductCommonComponents
( Oct 26, 2013 03.56.38 PM ) Pass [000 min 00 sec] Common Components - productCommonComponents
( Oct 26, 2013 03.57.06 PM ) Pass [000 min 24 sec] Common Components - commonComponents
( Oct 26, 2013 03.57.08 PM ) Fail [ Unknown ] Common Components - ocm
( Oct 26, 2013 03.57.40 PM ) Pass [000 min 32 sec] OPMN - opmn
( Oct 26, 2013 03.57.52 PM ) Pass [000 min 11 sec] Essbase Server - essbase_services
( Oct 26, 2013 03.57.56 PM ) Pass [000 min 04 sec] OUI
( Oct 26, 2013 03.57.59 PM ) Fail [005 min 38 sec] Total
Fail ocm assembly was not saved in SoftwareRegistry.
Fail commonComponents assembly was not saved in SoftwareRegistry.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 3/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, <data-value name="BEAHOME" value="/apps/Oracle/EPMSystem11R1/.." />
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <ALT_TEMP_DIR> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, <data-value name="altTempDir" value="/tmp" />
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/wl10_install.sh.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=<HYPERION_HOME>/tmp/wl_stage/silent.xml -log=<HYPERION_HOME>/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=<HYPERION_HOME>/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=/apps/Oracle/EPMSystem11R1/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/wl10_install.sh.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <USER_DIR> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar /apps/Hyp_Dump/HypInstall/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=/apps/Oracle/EPMSystem11R1/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:55:11 PM), Install, com.installshield.product.actions.DeleteFile, dbg, File /apps/Oracle/EPMSystem11R1/common/SharedServices/11.1.2.0/lib/EPMIdentityAsserter.jar does not exist
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Starting OCM initial setup..
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Non-resolved OCM install location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Resolved OCM install location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Canonical OCM location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Assembly UUIDs selected: webLogicCommonComponent[],essbaseProductCommonComponents[],commonComponents[],tools[],ocm[],essbase_services[Essbase],oracle_common[],staticContent[],productCommonComponents[],opmn[]
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Waiting until webLogicCommonComponent installed
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, assemblyStatus.webLogicCommonComponent: COMPLETED
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: /apps/Oracle/EPMSystem11R1/ccr/bin/setupCCR -S EPMInstall -V 11.1.2.0 -s -d ...
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [TERM=xterm, ORACLE_HOME=/apps/Oracle/EPMSystem11R1, SHLVL=2, JAVA_HOME=/apps/Oracle/jdk160_29, KDEDIRS=/usr, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, SSH_CLIENT=10.152.4.217 50858 22, MAIL=/var/spool/mail/Hypadmin, PWD=/apps/Hyp_Dump/HypInstall, HOSTNAME=advltpde01.adweag.local, SSH_TTY=/dev/pts/2, LOGNAME=Hypadmin, CVS_RSH=ssh, G_BROKEN_FILENAMES=1, _=/usr/bin/nohup, QTDIR=/usr/lib64/qt-3.3, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, LD_LIBRARY_PATH=/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64/server:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/../lib/amd64, SSH_CONNECTION=10.152.4.217 50858 10.150.21.36 22, OLDPWD=/apps/Hyp_Dump/HypInstall, SHELL=/bin/bash, HISTSIZE=1000, PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Hypadmin/bin, QTINC=/usr/lib64/qt-3.3/include, DISPLAY=localhost:10.0, USER=Hypadmin, QTLIB=/usr/lib64/qt-3.3/lib, KDE_IS_PRELINKED=1, HOME=/home/Hypadmin, HISTCONTROL=ignoredups, LESSOPEN=|/usr/bin/lesspipe.sh %s, LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:, LANG=en_US.UTF-8]
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, /apps/Oracle/EPMSystem11R1/ccr/bin/setupCCR -S EPMInstall -V 11.1.2.0 -s -d :
STDOUT:
STDERR:
Error encountered in package deployment.
Check the contents of the deployment log - /apps/Oracle/EPMSystem11R1/ccr/hosts/advltpde01.adweag.local/log/install-core-10-26-2013_15.57.07-28035.log
Exit code: 11
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR -r ...
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [TERM=xterm, ORACLE_HOME=/apps/Oracle/EPMSystem11R1, SHLVL=2, JAVA_HOME=/apps/Oracle/jdk160_29, KDEDIRS=/usr, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, SSH_CLIENT=10.152.4.217 50858 22, MAIL=/var/spool/mail/Hypadmin, PWD=/apps/Hyp_Dump/HypInstall, HOSTNAME=advltpde01.adweag.local, SSH_TTY=/dev/pts/2, LOGNAME=Hypadmin, CVS_RSH=ssh, G_BROKEN_FILENAMES=1, _=/usr/bin/nohup, QTDIR=/usr/lib64/qt-3.3, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, LD_LIBRARY_PATH=/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64/server:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/../lib/amd64, SSH_CONNECTION=10.152.4.217 50858 10.150.21.36 22, OLDPWD=/apps/Hyp_Dump/HypInstall, SHELL=/bin/bash, HISTSIZE=1000, PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Hypadmin/bin, QTINC=/usr/lib64/qt-3.3/include, DISPLAY=localhost:10.0, USER=Hypadmin, QTLIB=/usr/lib64/qt-3.3/lib, KDE_IS_PRELINKED=1, HOME=/home/Hypadmin, HISTCONTROL=ignoredups, LESSOPEN=|/usr/bin/lesspipe.sh %s, LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:, LANG=en_US.UTF-8]
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR -r :
STDOUT:
STDERR:
sh: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR: No such file or directory
Exit code: 127
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, wrn, OCM installation check failed: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR does not exist
Appreciate a Quick help on this.

Have a read of "EPM v11.1.2.3 Installation Of Oracle Common Components Fails on Linux 64-bit Server (Doc ID 1567479.1)"
Cheers
John
http://john-goodwin.blogspot.com/

Servlet and EJB on different machine: Security propagation

Hi all,
I have an application, where my servlets and EJBS are deployed on the same machine.So
when in my servlet a user need to authenticate himself, security credentials are
propagated to the EJB automatically.I'd like to know in the case where the components
are on different machine if I need to put the credential in my InitialContext
when my servlet calls my EJB or if it is also done automatically.
Cheers
romain

Say your stub is in a jar called stub.jar.
You need to put that stub somewhere that it can be reached through a protocol for which Java has a URL type - so you can put it on a shared file system and use a file URL or behind an http server and use an http URL.
Let's use http - put stub.jar at the docroot of a web server.
Then, when you start your SERVER code, include this VM parameter:
-Djava.rmi.server.codebase="http://<serveraddress>stub.jar"
Now your client will be able to use http to load the stub file out of stub.jar through http.
If you do use a file URL, make sure the shared directory you put your jar in is not on the client's classpath.

Imp from different machine

Hi,
I have dump(exp) which was took on oracle 10g solaris.
I want to import in oracle 9i (windows) which is not psble as downward compatiblity not psble.
So, I m trying to import through 10g oracle home which is on different machine. but cudnt it throws out error
D:\oracle\product\10.2.0\BIN>imp abc/xyz@test
Import: Release 10.2.0.1.0 - Production on Mon Aug 9 13:15:11 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
IMP-00000: Import terminated unsuccessfully
regards,

try this out
set ORACLE_SID=test
sqlplus
/as sysdba
startup
get back to host
imp username/password@test file=filename.dmp fromuser=abc touser=xyz
if u have the complete database dump file use this
imp username/password@test file =filename.dmp full=y
Edited by: Suhail Faraaz on Aug 9, 2010 3:26 AM

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Installation Biztalk Server 2013 and SQL on different machines

I want to know if I can install a Biztalk server 2013 and SQL on different machines?

BizTalk Server 2103 and SQL Server (SQL Server
2012 or SQL Server 2008 R2 SP1) can be installed and configured on different machines.
For more instruction about this installation, refer to following MSDN installation guide for BizTalk :
Installation Guides Related to BizTalk Server 2013 and 2013 R2
from the above list download -
"Installing BizTalk Server 2013 and BAM in a Multi-Computer Environment.docx" document for your requirement.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Re-installation of the Windows 7 at a different machine

Hi,
We are a small business with 15 licenses of Windows 7 (out of which we are using 12 Licenses as of now). Now one of the machine was having hardware issues and it crashed hence we have got a new machine in hand. If we install the Windows 7 with the key then
will it be counted as the 13th license activation ? and Is there a way that I can re-install it on a different machine without loosing another activation slot. Our intention is to run Windows 7 on 12 PCs and keep 3 licenses in hand for future use.

If I see in my Relationship summary than it shows "Parent Programme-Open"
Ok, so based on that description, it sounds like you have a Volume Licensing agreement, of the "Open" variety.
And, I'll assume that you purchased 15 x WindowsClientUpgrade, or, 15xWindowsClientSoftwareAssurance.
It's my understanding that you can assign, and re-assign (move) your 15 licenses whenever you need to, as long as you only ever have 15 computers (not more than 15) loaded with your entitlement at any one time.
Also, you can re-assign (move) an unlimited number of times (never exceeding 15 loaded machines at one time).
Also, you can only re-assign (move) a license every 90days (e.g. you can't move the same license every 30days).
The exception to this 90day limit, is if the hardware fails, you are permitted to move the license sooner than 90days.
Assuming you are using MAK product keys to activate your product, every time you activate an MAK product key, an activation "slot" is consumed, even if you re-activate upon exactly the same computer hardware.
For this reason, MS typically grant you slightly more MAK activations than your licensed quantity, this allows for re-imaging failed computers, or when you need to replace an old/failed computer.
If you do exhaust your total MAK activation quantity, you can request further activations from MS.
You can check the current status of your activation quantity in the VLSC website, it will show as:
Windows Client [version e.g. 7]: xx/yy
where xx is the quantity consumed by you, and, yy is the maximum quantity permitted {Activation Limit}.
When you reach the maximum permitted {Activation Limit}, your activations are exhausted, and you must contact MS to request further activations.
http://technet.microsoft.com/en-us/library/ff793432.aspx#EXX
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Help again for removing Oracle components from Windows NT machine

I want to remove all oracle stuff from my Windows NT machine.I have a problem to do it.I did following:
1.Stop all Oracle involved services.
2.delete all registry involved in Oracle.
3.delete all folder involved Oracle.
But I cannot delete following registry key:
LEGACY_ORACLEAGENT80
LEGACY_ORACLECLIENTLISTER
LEGACY_ORACLEHOME81TNSLISTENER
LEGANCY_ORACLEDB8
LEGANCY_ORACLESERVICEORCL
LEGANCY_ORACLESERVICESPORTS
LEGANCY_ORACLESNMPPEERMASTERAGENT
LEGANCY_ORACLESQLSERVICESV8.0SQLSRVCONFIG
LEGANCY_ORACLESTARTOAS40_WEBSITE40
LEGANCY_ORACLESTARTORCL
LEGANCY_ORACLETNSLISTERER80
LEGANCY_ORACLEWEBBASSISTANT
LEGANCY_ORACLEWEBBASSISTANT0
LEGANCY_ORACLEWWWLISTENER40ADMIN_WEBSITE40
LEGANCY_ORACLEWWWLISTENER40NODE_WEBSITE40
LEGANCY_ORACLEWWWLISTENER40WWW_WEBSITE40
I have already deleted all Oracle folders.
The status in my machine now is: no Oracle folder,no registry keys involved Oracle excopt above Keys.
Any help is appreciate.

Thank you very much.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
These are internal Windows registry keys - you do not need to delete them
Jason Pepper
Snr Product Manager
Oracle Enterprise Internet Tools<HR></BLOCKQUOTE>
null

Oracle 817 installation on P4 machines

I'm having a problem installing Oracle 817 on a Compaq P4 machine. I copied the entire CD to the C: drive, made changes to 3 lines of code in oraparam.ini Jre_memory_location
default_home_location and
default_home_name
I also changed the name of the file - symcjit.dll to symcjit.old
When I run setup I get the error - The Java runtime environment was not found at bin\jrew.exe.
Can anyone make any suggestions to resolve this problem.
Thanks

Hi,
If you're getting "command not found" then the location where you've setup odbcinst and the other files is not in your PATH setting. I'd suggest moving them from /usr to /usr/local/bin or the SuSe equivalent that's already in your PATH.
Cheers,
Stuart.

Installing Oracle8i (EE) and Oracle9iAS (EE) on different machines (Windows 2000)

Hi, All:
Greetings! We are new to Oracle9iAS and we need your help.
We want to try all of the Oracle9iAS components for our Oracle8i (8.1.7) data warehouse, so we use two Windows 2000 server machines to do the test. One is for the Oracle8i database (8.1.7) and another is for the Oracle9iAS. However, we have not found the installation guide on the Oracle sites for installing Oracle8i (EE) and Oracle9iAS (EE) on different machines. We have no problem installing the Oracle8i (EE). Our questions are:
1. Is there any installation guide for installing Oracle8i (EE) and Oracle9iAS (EE) on different machines (Windows NT/2000)?
2. Should we follow the steps in the Oracle9i Application Server Installation Guide for Windows NT/2000?
3. Is there anything or tips for the installation we should know?
Please help us if you know anything about the installation. Thanks for your time and kindness!
Rong Bi
[email protected]

Hello,
You can install oracle databaes and oracle 9ias on seperate machines which will have less problems indeed.
All the documentation you get in technet is the latest !!!
It is better you have 1.0.2.2 which is the latest release for Oracle 9IAS.
The steps to install Oracle 9IAS in brief are as follows !!!
> Install 8i database (which is not necessary in your case), but notedown the hostname, port, sid etc
> Install 9IAS which requires the info of database which you have noted in step 1
Follow the Installation documentation provided with Oracle 9IAS 1.0.2.2 which has screen shots !!!
Also in technet a new folder 'Oracle9i by Example: Tutorial' has been added which has installation instructions !!!
Hope this helps !!!
A.Kishore

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Oracle 11gr2 RAC installation

Hi Gurus,
In new project we have proposed to have 2 nodes single site RAC database Oracle 11gR2 64 Bit . We are going to have OEL 5.4 64 Bit Linux as OS and IBM as machine .
We are migrating standalone 10g R2 database to 11r2 Rac and from HP-UX to OEL Linux . We are migrating from different datacenter .
What would be the pfile configuration (i mean memory size doubles ) in RAC ?
We are going to use IBM storage . Need light on followings . Pls help me out
1>Requirements for installation
2>Grid installation requirements
3>ASM instance is physical database instance or just service ?
4>Any oracle document for installation of 11gR2 Grid and RAC?
If you provide me authorized links of RAC installation that would be better .
Thanks & Regards

1>Requirements for installation
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10840/toc.htm
2>Grid installation requirements
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10812/toc.htm
3>ASM instance is physical database instance or just service ?
Resp.: ASM is a database instance (i.e. just the memory structures, no physical files). See this link:
4>Any oracle document for installation of 11gR2 Grid and RAC?
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10813/toc.htm (RAC), the GI is in item 2 above.
Always check the documentation site 1st: http://www.oracle.com/pls/db112/homepage

Oracle 9i and Oracle Forms 6i in 2 different Oracle-Homes

My OS: Windows XP
First I installed "Oracle9i Database 9.2.0.1.0" with Oracle-Home-Path "OraHome92".
Then I wanted to install "Oracle Forms Developer/Services 6i Release 2", because I need to use the Form Builder. I wasn't able to install this in the same Oracle-Home, so I installed it with a new one called "oradev". Now my Oracle Installation-Folder looks like this:
-oracle
---admin
---ora92 (comment: HOME 0)
---oradata
---oradev (comment: HOME 1)
Working with the database directly works fine, with Enterprise Manager I created a user, database and my first tables. No problems there.
But now I do have a problem: When I try to connect to my database with Form Builder, I get the following error message:
ORA-12154: TNS:Der Dienstname konnte nicht aufgelöst werden.
In english it should be this:
ORA-12154: TNS: could not resolve service name.
I guess the problem might be the two different oracle-homes?!??
Does anybody have an idea how I can connect to my database with Form Builder?

How can I do that?Use Oracle Net8 Easy Config utility (Windows menu).
I try to connect with the user I created with
Enterprise Manager.When you connect to DB you use a username, a password, and a connection string. The last one (a TNS alias) is necessary because you're working in a different Oracle Home, it's the same as you were on a different machine.

How to import shared components from a different workspace.

I have several workspaces / schemas (one to one relationship) in the same server.
When I try to install components exported from an application in one workspace to an application in another workspace I get an error because of the different workspace.
Source workspace/application = SCAI / 102
Target workspace/application = ACAMPO / 129
The objects in the database are identical in both schemas behind the workspaces.
Is it possible to edit the SQL file to address it to the target workspace?
I cannot see any uncommented entries in the sql referring to the application / workspace or schema name, but these two:
prompt APPLICATION 102 - SCAI
wwv_flow.g_flow_id := 129;
Will it work if i change it to
prompt APPLICATION 129 - ACAMPO
wwv_flow.g_flow_id := 129;
for instance?
Below is the SQL code of two LOVs exported.
Any help will be appreciated. I need to export not two but dozens of components and I don't want do do it manually.
================================
set define off
set verify off
set serveroutput on size 1000000
set feedback off
WHENEVER SQLERROR EXIT SQL.SQLCODE ROLLBACK
begin wwv_flow.g_import_in_progress := true; end;
--application/set_environment
prompt APPLICATION 102 - SCAI
-- Application Export:
-- Application: 102
-- Name: SCAI
-- Date and Time: 10:24 Thursday April 26, 2007
-- Exported By: FBARRENA
-- Flashback: 0
-- Export Type: Component Export
-- Manifest
-- LOV: A_ACREDITADOS_900_LOV
-- LOV: A_ACRED_CLIENTES_LOV
-- Manifest End
-- Version: 2.2.1.00.04
-- Import:
-- Using application builder
-- or
-- Using sqlplus as the Oracle user: FLOWS_020200
-- AAAA PPPPP EEEEEE XX XX
-- AA AA PP PP EE XX XX
-- AA AA PP PP EE XX XX
-- AAAAAAAAAA PPPPP EEEE XXXX
-- AA AA PP EE XX XX
-- AA AA PP EE XX XX
-- AA AA PP EEEEEE XX XX
prompt Set Credentials...
begin
-- Assumes you are running the script connected to sqlplus as the owner (parsing schema) of the application or as the product schema.
wwv_flow_api.set_security_group_id(p_security_group_id=>733821679136675);
end;
begin wwv_flow.g_import_in_progress := true; end;
begin
select value into wwv_flow_api.g_nls_numeric_chars from nls_session_parameters where parameter='NLS_NUMERIC_CHARACTERS';
end;
begin execute immediate 'alter session set nls_numeric_characters=''.,''';
end;
begin wwv_flow.g_browser_language := 'en-us'; end;
prompt Check Compatibility...
begin
-- This date identifies the minimum version required to import this file.
wwv_flow_api.set_version(p_version_yyyy_mm_dd=>'2006.02.24');
end;
prompt Set Application ID...
begin
-- SET APPLICATION ID
wwv_flow.g_flow_id := 102;
wwv_flow_api.g_id_offset := 0;
null;
end;
-- C O M P O N E N T E X P O R T
-- Requires Application Express 2.2 or greater
begin
wwv_flow_api.g_mode := 'REPLACE';
end;
prompt Component Export: LOV 10548119991618465
prompt ...Shared Lists of values
begin
wwv_flow_api.create_list_of_values (
p_id => 10548119991618465 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_lov_name => 'A_ACREDITADOS_900_LOV',
p_lov_query=> 'select ID_ACRED || '' '' ||NOMBRE_ACREDITADO d, ID_ACRED r'||chr(10)||
'from A_ACREDITADOS_V'||chr(10)||
'where (DESHABILITADO IS NULL OR DESHABILITADO <> ''1'') and ID_ACRED like ''900%'''||chr(10)||
'order by NOMBRE_ACREDITADO');
null;
end;
prompt Component Export: LOV 3172519822650040
prompt ...Shared Lists of values
begin
wwv_flow_api.create_list_of_values (
p_id => 3172519822650040 + wwv_flow_api.g_id_offset,
p_flow_id => wwv_flow.g_flow_id,
p_lov_name => 'A_ACRED_CLIENTES_LOV',
p_lov_query=> 'select APELLIDO_PATERNO||'' ''||APELLIDO_MATERNO||'' ''||NOMBRE d, ID_ACRED r'||chr(10)||
'from A_ACREDITADOS where ES_CLIENTE =''1'''||chr(10)||
'order by 1');
null;
end;
COMMIT;

Francisco,
No, it won't work. The internal IDs of application components are all different between the two applications.
The objects in the database are identical in both schemas behind the workspaces.
This problem is not related to database objects like tables, etc.
Scott

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle Bi Components installation on different machines

Similar Messages

Maybe you are looking for